arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys

gpio-keys already 'inherits' the interrupts from the controller
of the specified GPIO, so having another declaration is redundant.
On >=v5.15 this started causing an oops under gpio_keys_probe as
the IRQ was already claimed.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Fixes: e3f0f133ef68 ("arm64: dts: add device tree for Traverse Ten64 (LS1088A)")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index 3063851c2fb91e87248cc5c09b9148675b993b85..d3f03dcbb8c381c5a083bb0cc2f4e163ccb8e59e 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -38,7 +38,6 @@
                powerdn {
                        label = "External Power Down";
                        gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-                       interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
                        linux,code = <KEY_POWER>;
                };
 
@@ -46,7 +45,6 @@
                admin {
                        label = "ADMIN button";
                        gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-                       interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };