dt-bindings: Document EMAC Rockchip

This adds the necessary binding documentation for the EMAC Rockchip platform
driver found in RK3066 and RK3188 SoCs.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.txt b/Documentation/devicetree/bindings/net/emac_rockchip.txt
new file mode 100644 (file)
index 0000000..8dc1c79
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/emac_rockchip.txt
@@ -0,0 +1,50 @@
+* ARC EMAC 10/100 Ethernet platform driver for Rockchip Rk3066/RK3188 SoCs
+
+Required properties:
+- compatible: Should be "rockchip,rk3066-emac" or "rockchip,rk3188-emac"
+  according to the target SoC.
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the EMAC interrupts
+- rockchip,grf: phandle to the syscon grf used to control speed and mode
+  for emac.
+- phy: see ethernet.txt file in the same directory.
+- phy-mode: see ethernet.txt file in the same directory.
+
+Optional properties:
+- phy-supply: phandle to a regulator if the PHY needs one
+
+Clock handling:
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "hclk" for the host clock needed to calculate and set
+  polling period of EMAC and "macref" for the reference clock needed to transfer
+  data to and from the phy.
+
+Child nodes of the driver are the individual PHY devices connected to the
+MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
+
+Examples:
+
+ethernet@10204000 {
+       compatible = "rockchip,rk3188-emac";
+       reg = <0xc0fc2000 0x3c>;
+       interrupts = <6>;
+       mac-address = [ 00 11 22 33 44 55 ];
+
+       clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+       clock-names = "hclk", "macref";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+       rockchip,grf = <&grf>;
+
+       phy = <&phy0>;
+       phy-mode = "rmii";
+       phy-supply = <&vcc_rmii>;
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+       phy0: ethernet-phy@0 {
+             reg = <1>;
+       };
+};