arm: mvebu: Print CPU and SDRAM frequency upon startup

With this patch, the CPU and the DDR frequencies will get printed in the
U-Boot startup messages. Resulting in such a log:

U-Boot 2016.01-rc2-00188-gb8eeaec-dirty (Dec 21 2015 - 12:32:35 +0100)

SoC:   MV78460-B0 at 1600 MHz
I2C:   ready
DRAM:  4 GiB (800 MHz, ECC not enabled)
...

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>

diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index c9b9c77ec495f36c4a2fc6a74fc27370340a17fb..6ea558c69fd3a31a9c0ad78847f5a2a455a91fb0 100644 (file)
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -60,10 +60,95 @@ int mvebu_soc_family(void)
 }
 
 #if defined(CONFIG_DISPLAY_CPUINFO)
+
+#if defined(CONFIG_ARMADA_38X)
+/* SAR values for Armada 38x */
+#define CONFIG_SAR_REG         (MVEBU_REGISTER(0x18600))
+#define SAR_CPU_FREQ_OFFS      10
+#define SAR_CPU_FREQ_MASK      (0x1f << SAR_CPU_FREQ_OFFS)
+
+struct sar_freq_modes sar_freq_tab[] = {
+       {  0x0,  0x0,  666, 333, 333 },
+       {  0x2,  0x0,  800, 400, 400 },
+       {  0x4,  0x0, 1066, 533, 533 },
+       {  0x6,  0x0, 1200, 600, 600 },
+       {  0x8,  0x0, 1332, 666, 666 },
+       {  0xc,  0x0, 1600, 800, 800 },
+       { 0xff, 0xff,    0,   0,   0 }  /* 0xff marks end of array */
+};
+#else
+/* SAR values for Armada XP */
+#define CONFIG_SAR_REG         (MVEBU_REGISTER(0x18230))
+#define CONFIG_SAR2_REG                (MVEBU_REGISTER(0x18234))
+#define SAR_CPU_FREQ_OFFS      21
+#define SAR_CPU_FREQ_MASK      (0x7 << SAR_CPU_FREQ_OFFS)
+#define SAR_FFC_FREQ_OFFS      24
+#define SAR_FFC_FREQ_MASK      (0xf << SAR_FFC_FREQ_OFFS)
+#define SAR2_CPU_FREQ_OFFS     20
+#define SAR2_CPU_FREQ_MASK     (0x1 << SAR2_CPU_FREQ_OFFS)
+
+struct sar_freq_modes sar_freq_tab[] = {
+       {  0xa,  0x5,  800, 400, 400 },
+       {  0x1,  0x5, 1066, 533, 533 },
+       {  0x2,  0x5, 1200, 600, 600 },
+       {  0x2,  0x9, 1200, 600, 400 },
+       {  0x3,  0x5, 1333, 667, 667 },
+       {  0x4,  0x5, 1500, 750, 750 },
+       {  0x4,  0x9, 1500, 750, 500 },
+       {  0xb,  0x9, 1600, 800, 533 },
+       {  0xb,  0xa, 1600, 800, 640 },
+       {  0xb,  0x5, 1600, 800, 800 },
+       { 0xff, 0xff,    0,   0,   0 }  /* 0xff marks end of array */
+};
+#endif
+
+void get_sar_freq(struct sar_freq_modes *sar_freq)
+{
+       u32 val;
+       u32 freq;
+       int i;
+
+       val = readl(CONFIG_SAR_REG);    /* SAR - Sample At Reset */
+       freq = (val & SAR_CPU_FREQ_MASK) >> SAR_CPU_FREQ_OFFS;
+#if !defined(CONFIG_ARMADA_38X)
+       /*
+        * Shift CPU0 clock frequency select bit from SAR2 register
+        * into correct position
+        */
+       freq |= ((readl(CONFIG_SAR2_REG) & SAR2_CPU_FREQ_MASK)
+                >> SAR2_CPU_FREQ_OFFS) << 3;
+#endif
+       for (i = 0; sar_freq_tab[i].val != 0xff; i++) {
+               if (sar_freq_tab[i].val == freq) {
+#if defined(CONFIG_ARMADA_38X)
+                       *sar_freq = sar_freq_tab[i];
+                       return;
+#else
+                       int k;
+                       u8 ffc;
+
+                       ffc = (val & SAR_FFC_FREQ_MASK) >>
+                               SAR_FFC_FREQ_OFFS;
+                       for (k = i; sar_freq_tab[k].ffc != 0xff; k++) {
+                               if (sar_freq_tab[k].ffc == ffc) {
+                                       *sar_freq = sar_freq_tab[k];
+                                       return;
+                               }
+                       }
+                       i = k;
+#endif
+               }
+       }
+
+       /* SAR value not found, return 0 for frequencies */
+       *sar_freq = sar_freq_tab[i - 1];
+}
+
 int print_cpuinfo(void)
 {
        u16 devid = (readl(MVEBU_REG_PCIE_DEVID) >> 16) & 0xffff;
        u8 revid = readl(MVEBU_REG_PCIE_REVID) & 0xff;
+       struct sar_freq_modes sar_freq;
 
        puts("SoC:   ");
 
@@ -91,13 +176,13 @@ int print_cpuinfo(void)
        if (mvebu_soc_family() == MVEBU_SOC_AXP) {
                switch (revid) {
                case 1:
-                       puts("A0\n");
+                       puts("A0");
                        break;
                case 2:
-                       puts("B0\n");
+                       puts("B0");
                        break;
                default:
-                       printf("?? (%x)\n", revid);
+                       printf("?? (%x)", revid);
                        break;
                }
        }
@@ -105,17 +190,20 @@ int print_cpuinfo(void)
        if (mvebu_soc_family() == MVEBU_SOC_A38X) {
                switch (revid) {
                case MV_88F68XX_Z1_ID:
-                       puts("Z1\n");
+                       puts("Z1");
                        break;
                case MV_88F68XX_A0_ID:
-                       puts("A0\n");
+                       puts("A0");
                        break;
                default:
-                       printf("?? (%x)\n", revid);
+                       printf("?? (%x)", revid);
                        break;
                }
        }
 
+       get_sar_freq(&sar_freq);
+       printf(" at %d MHz\n", sar_freq.p_clk);
+
        return 0;
 }
 #endif /* CONFIG_DISPLAY_CPUINFO */

diff --git a/arch/arm/mach-mvebu/dram.c b/arch/arm/mach-mvebu/dram.c
index ddc5b7ee3eaf5b49cf4dcd410f2cad3a826bc955..059151a4b57264ed280079b946bd82cc7aa81e27 100644 (file)
--- a/arch/arm/mach-mvebu/dram.c
+++ b/arch/arm/mach-mvebu/dram.c
@@ -292,11 +292,18 @@ void dram_init_banksize(void)
        }
 }
 
+#if defined(CONFIG_ARMADA_XP)
 void board_add_ram_info(int use_default)
 {
+       struct sar_freq_modes sar_freq;
+
+       get_sar_freq(&sar_freq);
+       printf(" (%d MHz, ", sar_freq.d_clk);
+
        if (ecc_enabled())
-               printf(" (ECC");
+               printf("ECC");
        else
-               printf(" (ECC not");
+               printf("ECC not");
        printf(" enabled)");
 }
+#endif

diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h
index 5e8bf0c4ce0311704201ca942ee67b9d8514df41..47f45c1512a8686f3df1d729f5cc8ba196cdc202 100644 (file)
--- a/arch/arm/mach-mvebu/include/mach/cpu.h
+++ b/arch/arm/mach-mvebu/include/mach/cpu.h
@@ -106,6 +106,14 @@ struct kwgpio_registers {
        u32 irq_level;
 };
 
+struct sar_freq_modes {
+       u8 val;
+       u8 ffc;         /* Fabric Frequency Configuration */
+       u32 p_clk;
+       u32 nb_clk;
+       u32 d_clk;
+};
+
 /* Needed for dynamic (board-specific) mbus configuration */
 extern struct mvebu_mbus_state mbus_state;
 
@@ -123,6 +131,8 @@ void return_to_bootrom(void);
 
 int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks);
 
+void get_sar_freq(struct sar_freq_modes *sar_freq);
+
 /*
  * Highspeed SERDES PHY config init, ported from bin_hdr
  * to mainline U-Boot