net: dsa: sja1105: Use correct dsa_8021q VIDs for FDB commands

A FDB entry means that "frames that match this VID and DMAC must be
forwarded to this port".

In the case of dsa_8021q however, the VID is not a single one (and
neither two, as my previous patch assumed). The VID can be set either by
the CPU port (1 tx_vid), or by any of the other front-panel port (n-1
rx_vid's).

Fixes: 4948d4f79b6d ("net: dsa: sja1105: Hide the dsa_8021q VLANs from the bridge fdb command")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index ed0b721c794e575aa004b665e44412c716f72ae7..cadee769493573fa4236ef5fb44743cc9f5c5d73 100644 (file)
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1126,44 +1126,60 @@ static int sja1105_fdb_add(struct dsa_switch *ds, int port,
                           const unsigned char *addr, u16 vid)
 {
        struct sja1105_private *priv = ds->priv;
-       int rc;
+       u16 rx_vid, tx_vid;
+       int rc, i;
+
+       if (dsa_port_is_vlan_filtering(&ds->ports[port]))
+               return priv->info->fdb_add_cmd(ds, port, addr, vid);
 
        /* Since we make use of VLANs even when the bridge core doesn't tell us
         * to, translate these FDB entries into the correct dsa_8021q ones.
+        * The basic idea (also repeats for removal below) is:
+        * - Each of the other front-panel ports needs to be able to forward a
+        *   pvid-tagged (aka tagged with their rx_vid) frame that matches this
+        *   DMAC.
+        * - The CPU port (aka the tx_vid of this port) needs to be able to
+        *   send a frame matching this DMAC to the specified port.
+        * For a better picture see net/dsa/tag_8021q.c.
         */
-       if (!dsa_port_is_vlan_filtering(&ds->ports[port])) {
-               unsigned int upstream = dsa_upstream_port(priv->ds, port);
-               u16 tx_vid = dsa_8021q_tx_vid(ds, port);
-               u16 rx_vid = dsa_8021q_rx_vid(ds, port);
+       for (i = 0; i < SJA1105_NUM_PORTS; i++) {
+               if (i == port)
+                       continue;
+               if (i == dsa_upstream_port(priv->ds, port))
+                       continue;
 
-               rc = priv->info->fdb_add_cmd(ds, port, addr, tx_vid);
+               rx_vid = dsa_8021q_rx_vid(ds, i);
+               rc = priv->info->fdb_add_cmd(ds, port, addr, rx_vid);
                if (rc < 0)
                        return rc;
-               return priv->info->fdb_add_cmd(ds, upstream, addr, rx_vid);
        }
-       return priv->info->fdb_add_cmd(ds, port, addr, vid);
+       tx_vid = dsa_8021q_tx_vid(ds, port);
+       return priv->info->fdb_add_cmd(ds, port, addr, tx_vid);
 }
 
 static int sja1105_fdb_del(struct dsa_switch *ds, int port,
                           const unsigned char *addr, u16 vid)
 {
        struct sja1105_private *priv = ds->priv;
-       int rc;
+       u16 rx_vid, tx_vid;
+       int rc, i;
 
-       /* Since we make use of VLANs even when the bridge core doesn't tell us
-        * to, translate these FDB entries into the correct dsa_8021q ones.
-        */
-       if (!dsa_port_is_vlan_filtering(&ds->ports[port])) {
-               unsigned int upstream = dsa_upstream_port(priv->ds, port);
-               u16 tx_vid = dsa_8021q_tx_vid(ds, port);
-               u16 rx_vid = dsa_8021q_rx_vid(ds, port);
+       if (dsa_port_is_vlan_filtering(&ds->ports[port]))
+               return priv->info->fdb_del_cmd(ds, port, addr, vid);
 
-               rc = priv->info->fdb_del_cmd(ds, port, addr, tx_vid);
+       for (i = 0; i < SJA1105_NUM_PORTS; i++) {
+               if (i == port)
+                       continue;
+               if (i == dsa_upstream_port(priv->ds, port))
+                       continue;
+
+               rx_vid = dsa_8021q_rx_vid(ds, i);
+               rc = priv->info->fdb_del_cmd(ds, port, addr, rx_vid);
                if (rc < 0)
                        return rc;
-               return priv->info->fdb_del_cmd(ds, upstream, addr, rx_vid);
        }
-       return priv->info->fdb_del_cmd(ds, port, addr, vid);
+       tx_vid = dsa_8021q_tx_vid(ds, port);
+       return priv->info->fdb_del_cmd(ds, port, addr, tx_vid);
 }
 
 static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
@@ -1171,8 +1187,12 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
 {
        struct sja1105_private *priv = ds->priv;
        struct device *dev = ds->dev;
+       u16 rx_vid, tx_vid;
        int i;
 
+       rx_vid = dsa_8021q_rx_vid(ds, port);
+       tx_vid = dsa_8021q_tx_vid(ds, port);
+
        for (i = 0; i < SJA1105_MAX_L2_LOOKUP_COUNT; i++) {
                struct sja1105_l2_lookup_entry l2_lookup = {0};
                u8 macaddr[ETH_ALEN];
@@ -1198,14 +1218,24 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
                        continue;
                u64_to_ether_addr(l2_lookup.macaddr, macaddr);
 
-               /* We need to hide the dsa_8021q VLAN from the user.
-                * Convert the TX VID into the pvid that is active in
-                * standalone and non-vlan_filtering modes, aka 1.
-                * The RX VID is applied on the CPU port, which is not seen by
-                * the bridge core anyway, so there's nothing to hide.
+               /* We need to hide the dsa_8021q VLANs from the user. This
+                * basically means hiding the duplicates and only showing
+                * the pvid that is supposed to be active in standalone and
+                * non-vlan_filtering modes (aka 1).
+                * - For statically added FDB entries (bridge fdb add), we
+                *   can convert the TX VID (coming from the CPU port) into the
+                *   pvid and ignore the RX VIDs of the other ports.
+                * - For dynamically learned FDB entries, a single entry with
+                *   no duplicates is learned - that which has the real port's
+                *   pvid, aka RX VID.
                 */
-               if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
-                       l2_lookup.vlanid = 1;
+               if (!dsa_port_is_vlan_filtering(&ds->ports[port])) {
+                       if (l2_lookup.vlanid == tx_vid ||
+                           l2_lookup.vlanid == rx_vid)
+                               l2_lookup.vlanid = 1;
+                       else
+                               continue;
+               }
                cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data);
        }
        return 0;