#include <drm/bridge/analogix_dp.h>
#include "analogix_dp_core.h"
+#include "analogix_dp_reg.h"
#define to_dp(nm) container_of(nm, struct analogix_dp_device, nm)
{
unsigned char psr_version;
- analogix_dp_read_byte_from_dpcd(dp, DP_PSR_SUPPORT, &psr_version);
+ drm_dp_dpcd_readb(&dp->aux, DP_PSR_SUPPORT, &psr_version);
dev_dbg(dp->dev, "Panel PSR version : %x\n", psr_version);
return (psr_version & DP_PSR_IS_SUPPORTED) ? true : false;
unsigned char psr_en;
/* Disable psr function */
- analogix_dp_read_byte_from_dpcd(dp, DP_PSR_EN_CFG, &psr_en);
+ drm_dp_dpcd_readb(&dp->aux, DP_PSR_EN_CFG, &psr_en);
psr_en &= ~DP_PSR_ENABLE;
- analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
+ drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
/* Main-Link transmitter remains active during PSR active states */
psr_en = DP_PSR_MAIN_LINK_ACTIVE | DP_PSR_CRC_VERIFICATION;
- analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
+ drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
/* Enable psr function */
psr_en = DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE |
DP_PSR_CRC_VERIFICATION;
- analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
+ drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
analogix_dp_enable_psr_crc(dp);
}
-static unsigned char analogix_dp_calc_edid_check_sum(unsigned char *edid_data)
-{
- int i;
- unsigned char sum = 0;
-
- for (i = 0; i < EDID_BLOCK_LENGTH; i++)
- sum = sum + edid_data[i];
-
- return sum;
-}
-
-static int analogix_dp_read_edid(struct analogix_dp_device *dp)
-{
- unsigned char *edid = dp->edid;
- unsigned int extend_block = 0;
- unsigned char sum;
- unsigned char test_vector;
- int retval;
-
- /*
- * EDID device address is 0x50.
- * However, if necessary, you must have set upper address
- * into E-EDID in I2C device, 0x30.
- */
-
- /* Read Extension Flag, Number of 128-byte EDID extension blocks */
- retval = analogix_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
- EDID_EXTENSION_FLAG,
- &extend_block);
- if (retval)
- return retval;
-
- if (extend_block > 0) {
- dev_dbg(dp->dev, "EDID data includes a single extension!\n");
-
- /* Read EDID data */
- retval = analogix_dp_read_bytes_from_i2c(dp,
- I2C_EDID_DEVICE_ADDR,
- EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH,
- &edid[EDID_HEADER_PATTERN]);
- if (retval != 0) {
- dev_err(dp->dev, "EDID Read failed!\n");
- return -EIO;
- }
- sum = analogix_dp_calc_edid_check_sum(edid);
- if (sum != 0) {
- dev_err(dp->dev, "EDID bad checksum!\n");
- return -EIO;
- }
-
- /* Read additional EDID data */
- retval = analogix_dp_read_bytes_from_i2c(dp,
- I2C_EDID_DEVICE_ADDR,
- EDID_BLOCK_LENGTH,
- EDID_BLOCK_LENGTH,
- &edid[EDID_BLOCK_LENGTH]);
- if (retval != 0) {
- dev_err(dp->dev, "EDID Read failed!\n");
- return -EIO;
- }
- sum = analogix_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
- if (sum != 0) {
- dev_err(dp->dev, "EDID bad checksum!\n");
- return -EIO;
- }
-
- analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
- &test_vector);
- if (test_vector & DP_TEST_LINK_EDID_READ) {
- analogix_dp_write_byte_to_dpcd(dp,
- DP_TEST_EDID_CHECKSUM,
- edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
- analogix_dp_write_byte_to_dpcd(dp,
- DP_TEST_RESPONSE,
- DP_TEST_EDID_CHECKSUM_WRITE);
- }
- } else {
- dev_info(dp->dev, "EDID data does not include any extensions.\n");
-
- /* Read EDID data */
- retval = analogix_dp_read_bytes_from_i2c(dp,
- I2C_EDID_DEVICE_ADDR, EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH, &edid[EDID_HEADER_PATTERN]);
- if (retval != 0) {
- dev_err(dp->dev, "EDID Read failed!\n");
- return -EIO;
- }
- sum = analogix_dp_calc_edid_check_sum(edid);
- if (sum != 0) {
- dev_err(dp->dev, "EDID bad checksum!\n");
- return -EIO;
- }
-
- analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
- &test_vector);
- if (test_vector & DP_TEST_LINK_EDID_READ) {
- analogix_dp_write_byte_to_dpcd(dp,
- DP_TEST_EDID_CHECKSUM, edid[EDID_CHECKSUM]);
- analogix_dp_write_byte_to_dpcd(dp,
- DP_TEST_RESPONSE, DP_TEST_EDID_CHECKSUM_WRITE);
- }
- }
-
- dev_dbg(dp->dev, "EDID Read success!\n");
- return 0;
-}
-
-static int analogix_dp_handle_edid(struct analogix_dp_device *dp)
-{
- u8 buf[12];
- int i;
- int retval;
-
- /* Read DPCD DP_DPCD_REV~RECEIVE_PORT1_CAP_1 */
- retval = analogix_dp_read_bytes_from_dpcd(dp, DP_DPCD_REV, 12, buf);
- if (retval)
- return retval;
-
- /* Read EDID */
- for (i = 0; i < 3; i++) {
- retval = analogix_dp_read_edid(dp);
- if (!retval)
- break;
- }
-
- return retval;
-}
-
static void
analogix_dp_enable_rx_to_enhanced_mode(struct analogix_dp_device *dp,
bool enable)
{
u8 data;
- analogix_dp_read_byte_from_dpcd(dp, DP_LANE_COUNT_SET, &data);
+ drm_dp_dpcd_readb(&dp->aux, DP_LANE_COUNT_SET, &data);
if (enable)
- analogix_dp_write_byte_to_dpcd(dp, DP_LANE_COUNT_SET,
- DP_LANE_COUNT_ENHANCED_FRAME_EN |
- DPCD_LANE_COUNT_SET(data));
+ drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET,
+ DP_LANE_COUNT_ENHANCED_FRAME_EN |
+ DPCD_LANE_COUNT_SET(data));
else
- analogix_dp_write_byte_to_dpcd(dp, DP_LANE_COUNT_SET,
- DPCD_LANE_COUNT_SET(data));
+ drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET,
+ DPCD_LANE_COUNT_SET(data));
}
static int analogix_dp_is_enhanced_mode_available(struct analogix_dp_device *dp)
u8 data;
int retval;
- analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LANE_COUNT, &data);
+ drm_dp_dpcd_readb(&dp->aux, DP_MAX_LANE_COUNT, &data);
retval = DPCD_ENHANCED_FRAME_CAP(data);
return retval;
{
analogix_dp_set_training_pattern(dp, DP_NONE);
- analogix_dp_write_byte_to_dpcd(dp, DP_TRAINING_PATTERN_SET,
- DP_TRAINING_PATTERN_DISABLE);
+ drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+ DP_TRAINING_PATTERN_DISABLE);
}
static void
/* Setup RX configuration */
buf[0] = dp->link_train.link_rate;
buf[1] = dp->link_train.lane_count;
- retval = analogix_dp_write_bytes_to_dpcd(dp, DP_LINK_BW_SET, 2, buf);
- if (retval)
+ retval = drm_dp_dpcd_write(&dp->aux, DP_LINK_BW_SET, buf, 2);
+ if (retval < 0)
return retval;
/* Set TX pre-emphasis to minimum */
analogix_dp_set_training_pattern(dp, TRAINING_PTN1);
/* Set RX training pattern */
- retval = analogix_dp_write_byte_to_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
- DP_LINK_SCRAMBLING_DISABLE | DP_TRAINING_PATTERN_1);
- if (retval)
+ retval = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+ DP_LINK_SCRAMBLING_DISABLE |
+ DP_TRAINING_PATTERN_1);
+ if (retval < 0)
return retval;
for (lane = 0; lane < lane_count; lane++)
buf[lane] = DP_TRAIN_PRE_EMPH_LEVEL_0 |
DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
- retval = analogix_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET,
- lane_count, buf);
+ retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, buf,
+ lane_count);
+ if (retval < 0)
+ return retval;
- return retval;
+ return 0;
}
static unsigned char analogix_dp_get_lane_status(u8 link_status[2], int lane)
lane_count = dp->link_train.lane_count;
- retval = analogix_dp_read_bytes_from_dpcd(dp,
- DP_LANE0_1_STATUS, 2, link_status);
- if (retval)
+ retval = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, 2);
+ if (retval < 0)
return retval;
- retval = analogix_dp_read_bytes_from_dpcd(dp,
- DP_ADJUST_REQUEST_LANE0_1, 2, adjust_request);
- if (retval)
+ retval = drm_dp_dpcd_read(&dp->aux, DP_ADJUST_REQUEST_LANE0_1,
+ adjust_request, 2);
+ if (retval < 0)
return retval;
if (analogix_dp_clock_recovery_ok(link_status, lane_count) == 0) {
/* set training pattern 2 for EQ */
analogix_dp_set_training_pattern(dp, TRAINING_PTN2);
- retval = analogix_dp_write_byte_to_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
- DP_LINK_SCRAMBLING_DISABLE |
- DP_TRAINING_PATTERN_2);
- if (retval)
+ retval = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+ DP_LINK_SCRAMBLING_DISABLE |
+ DP_TRAINING_PATTERN_2);
+ if (retval < 0)
return retval;
dev_info(dp->dev, "Link Training Clock Recovery success\n");
analogix_dp_set_lane_link_training(dp,
dp->link_train.training_lane[lane], lane);
- retval = analogix_dp_write_bytes_to_dpcd(dp,
- DP_TRAINING_LANE0_SET, lane_count,
- dp->link_train.training_lane);
- if (retval)
+ retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET,
+ dp->link_train.training_lane, lane_count);
+ if (retval < 0)
return retval;
- return retval;
+ return 0;
}
static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp)
lane_count = dp->link_train.lane_count;
- retval = analogix_dp_read_bytes_from_dpcd(dp,
- DP_LANE0_1_STATUS, 2, link_status);
- if (retval)
+ retval = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, 2);
+ if (retval < 0)
return retval;
if (analogix_dp_clock_recovery_ok(link_status, lane_count)) {
return -EIO;
}
- retval = analogix_dp_read_bytes_from_dpcd(dp,
- DP_ADJUST_REQUEST_LANE0_1, 2, adjust_request);
- if (retval)
+ retval = drm_dp_dpcd_read(&dp->aux, DP_ADJUST_REQUEST_LANE0_1,
+ adjust_request, 2);
+ if (retval < 0)
return retval;
- retval = analogix_dp_read_byte_from_dpcd(dp,
- DP_LANE_ALIGN_STATUS_UPDATED, &link_align);
- if (retval)
+ retval = drm_dp_dpcd_readb(&dp->aux, DP_LANE_ALIGN_STATUS_UPDATED,
+ &link_align);
+ if (retval < 0)
return retval;
analogix_dp_get_adjust_training_lane(dp, adjust_request);
analogix_dp_set_lane_link_training(dp,
dp->link_train.training_lane[lane], lane);
- retval = analogix_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET,
- lane_count, dp->link_train.training_lane);
+ retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET,
+ dp->link_train.training_lane, lane_count);
+ if (retval < 0)
+ return retval;
- return retval;
+ return 0;
}
static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp,
* For DP rev.1.2, Maximum link rate of Main Link lanes
* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
*/
- analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data);
+ drm_dp_dpcd_readb(&dp->aux, DP_MAX_LINK_RATE, &data);
*bandwidth = data;
}
* For DP rev.1.1, Maximum number of Main Link lanes
* 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes
*/
- analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LANE_COUNT, &data);
+ drm_dp_dpcd_readb(&dp->aux, DP_MAX_LANE_COUNT, &data);
*lane_count = DPCD_MAX_LANE_COUNT(data);
}
if (enable) {
analogix_dp_enable_scrambling(dp);
- analogix_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET,
- &data);
- analogix_dp_write_byte_to_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
- (u8)(data & ~DP_LINK_SCRAMBLING_DISABLE));
+ drm_dp_dpcd_readb(&dp->aux, DP_TRAINING_PATTERN_SET, &data);
+ drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+ (u8)(data & ~DP_LINK_SCRAMBLING_DISABLE));
} else {
analogix_dp_disable_scrambling(dp);
- analogix_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET,
- &data);
- analogix_dp_write_byte_to_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
- (u8)(data | DP_LINK_SCRAMBLING_DISABLE));
+ drm_dp_dpcd_readb(&dp->aux, DP_TRAINING_PATTERN_SET, &data);
+ drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+ (u8)(data | DP_LINK_SCRAMBLING_DISABLE));
}
}
int analogix_dp_get_modes(struct drm_connector *connector)
{
struct analogix_dp_device *dp = to_dp(connector);
- struct edid *edid = (struct edid *)dp->edid;
+ struct edid *edid;
int ret, num_modes = 0;
ret = analogix_dp_prepare_panel(dp, true, false);
return 0;
}
- if (analogix_dp_handle_edid(dp) == 0) {
+ edid = drm_get_edid(connector, &dp->aux.ddc);
+ if (edid) {
drm_mode_connector_update_edid_property(&dp->connector, edid);
num_modes += drm_add_edid_modes(&dp->connector, edid);
+ kfree(edid);
}
if (dp->plat_data->panel)
return 0;
}
+static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
+ struct drm_dp_aux_msg *msg)
+{
+ struct analogix_dp_device *dp = to_dp(aux);
+
+ return analogix_dp_transfer(dp, msg);
+}
+
int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
struct analogix_dp_plat_data *plat_data)
{
dp->drm_dev = drm_dev;
dp->encoder = dp->plat_data->encoder;
+ dp->aux.name = "DP-AUX";
+ dp->aux.transfer = analogix_dpaux_transfer;
+ dp->aux.dev = &pdev->dev;
+
+ ret = drm_dp_aux_register(&dp->aux);
+ if (ret)
+ goto err_disable_pm_runtime;
+
ret = analogix_dp_create_bridge(drm_dev, dp);
if (ret) {
DRM_ERROR("failed to create bridge (%d)\n", ret);
#define MAX_CR_LOOP 5
#define MAX_EQ_LOOP 5
-/* I2C EDID Chip ID, Slave Address */
-#define I2C_EDID_DEVICE_ADDR 0x50
-#define I2C_E_EDID_DEVICE_ADDR 0x30
-
-#define EDID_BLOCK_LENGTH 0x80
-#define EDID_HEADER_PATTERN 0x00
-#define EDID_EXTENSION_FLAG 0x7e
-#define EDID_CHECKSUM 0x7f
-
/* DP_MAX_LANE_COUNT */
#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
struct drm_device *drm_dev;
struct drm_connector connector;
struct drm_bridge *bridge;
+ struct drm_dp_aux aux;
struct clk *clock;
unsigned int irq;
void __iomem *reg_base;
int dpms_mode;
int hpd_gpio;
bool force_hpd;
- unsigned char edid[EDID_BLOCK_LENGTH * 2];
bool psr_support;
struct mutex panel_lock;
void analogix_dp_init_aux(struct analogix_dp_device *dp);
int analogix_dp_get_plug_in_status(struct analogix_dp_device *dp);
void analogix_dp_enable_sw_function(struct analogix_dp_device *dp);
-int analogix_dp_start_aux_transaction(struct analogix_dp_device *dp);
-int analogix_dp_write_byte_to_dpcd(struct analogix_dp_device *dp,
- unsigned int reg_addr,
- unsigned char data);
-int analogix_dp_read_byte_from_dpcd(struct analogix_dp_device *dp,
- unsigned int reg_addr,
- unsigned char *data);
-int analogix_dp_write_bytes_to_dpcd(struct analogix_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[]);
-int analogix_dp_read_bytes_from_dpcd(struct analogix_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[]);
-int analogix_dp_select_i2c_device(struct analogix_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr);
-int analogix_dp_read_byte_from_i2c(struct analogix_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int *data);
-int analogix_dp_read_bytes_from_i2c(struct analogix_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char edid[]);
void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype);
void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype);
void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count);
void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp);
void analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
struct edp_vsc_psr *vsc);
+ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
+ struct drm_dp_aux_msg *msg);
#endif /* _ANALOGIX_DP_CORE_H */
return retval;
}
-int analogix_dp_read_byte_from_dpcd(struct analogix_dp_device *dp,
- unsigned int reg_addr,
- unsigned char *data)
-{
- u32 reg;
- int i;
- int retval;
-
- for (i = 0; i < 3; i++) {
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
-
- /* Select DPCD device address */
- reg = AUX_ADDR_7_0(reg_addr);
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
- reg = AUX_ADDR_15_8(reg_addr);
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
- reg = AUX_ADDR_19_16(reg_addr);
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
-
- /*
- * Set DisplayPort transaction and read 1 byte
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = analogix_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
- }
-
- /* Read data buffer */
- reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
- *data = (unsigned char)(reg & 0xff);
-
- return retval;
-}
-
-int analogix_dp_write_bytes_to_dpcd(struct analogix_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[])
-{
- u32 reg;
- unsigned int start_offset;
- unsigned int cur_data_count;
- unsigned int cur_data_idx;
- int i;
- int retval = 0;
-
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
-
- start_offset = 0;
- while (start_offset < count) {
- /* Buffer size of AUX CH is 16 * 4bytes */
- if ((count - start_offset) > 16)
- cur_data_count = 16;
- else
- cur_data_count = count - start_offset;
-
- for (i = 0; i < 3; i++) {
- /* Select DPCD device address */
- reg = AUX_ADDR_7_0(reg_addr + start_offset);
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
- reg = AUX_ADDR_15_8(reg_addr + start_offset);
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
- reg = AUX_ADDR_19_16(reg_addr + start_offset);
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
-
- for (cur_data_idx = 0; cur_data_idx < cur_data_count;
- cur_data_idx++) {
- reg = data[start_offset + cur_data_idx];
- writel(reg, dp->reg_base +
- ANALOGIX_DP_BUF_DATA_0 +
- 4 * cur_data_idx);
- }
-
- /*
- * Set DisplayPort transaction and write
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_LENGTH(cur_data_count) |
- AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = analogix_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
- }
-
- start_offset += cur_data_count;
- }
-
- return retval;
-}
-
-int analogix_dp_read_bytes_from_dpcd(struct analogix_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[])
-{
- u32 reg;
- unsigned int start_offset;
- unsigned int cur_data_count;
- unsigned int cur_data_idx;
- int i;
- int retval = 0;
-
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
-
- start_offset = 0;
- while (start_offset < count) {
- /* Buffer size of AUX CH is 16 * 4bytes */
- if ((count - start_offset) > 16)
- cur_data_count = 16;
- else
- cur_data_count = count - start_offset;
-
- /* AUX CH Request Transaction process */
- for (i = 0; i < 3; i++) {
- /* Select DPCD device address */
- reg = AUX_ADDR_7_0(reg_addr + start_offset);
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
- reg = AUX_ADDR_15_8(reg_addr + start_offset);
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
- reg = AUX_ADDR_19_16(reg_addr + start_offset);
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
-
- /*
- * Set DisplayPort transaction and read
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_LENGTH(cur_data_count) |
- AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = analogix_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
- }
-
- for (cur_data_idx = 0; cur_data_idx < cur_data_count;
- cur_data_idx++) {
- reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0
- + 4 * cur_data_idx);
- data[start_offset + cur_data_idx] =
- (unsigned char)reg;
- }
-
- start_offset += cur_data_count;
- }
-
- return retval;
-}
-
-int analogix_dp_select_i2c_device(struct analogix_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr)
-{
- u32 reg;
- int retval;
-
- /* Set EDID device address */
- reg = device_addr;
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
- writel(0x0, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
- writel(0x0, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
-
- /* Set offset from base address of EDID device */
- writel(reg_addr, dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
-
- /*
- * Set I2C transaction and write address
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
- AUX_TX_COMM_WRITE;
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = analogix_dp_start_aux_transaction(dp);
- if (retval != 0)
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
-
- return retval;
-}
-
-int analogix_dp_read_byte_from_i2c(struct analogix_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int *data)
-{
- u32 reg;
- int i;
- int retval;
-
- for (i = 0; i < 3; i++) {
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
-
- /* Select EDID device */
- retval = analogix_dp_select_i2c_device(dp, device_addr,
- reg_addr);
- if (retval != 0)
- continue;
-
- /*
- * Set I2C transaction and read data
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_TX_COMM_I2C_TRANSACTION |
- AUX_TX_COMM_READ;
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = analogix_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
- }
-
- /* Read data */
- if (retval == 0)
- *data = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
-
- return retval;
-}
-
-int analogix_dp_read_bytes_from_i2c(struct analogix_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char edid[])
-{
- u32 reg;
- unsigned int i, j;
- unsigned int cur_data_idx;
- unsigned int defer = 0;
- int retval = 0;
-
- for (i = 0; i < count; i += 16) {
- for (j = 0; j < 3; j++) {
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
-
- /* Set normal AUX CH command */
- reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
- reg &= ~ADDR_ONLY;
- writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
-
- /*
- * If Rx sends defer, Tx sends only reads
- * request without sending address
- */
- if (!defer)
- retval = analogix_dp_select_i2c_device(dp,
- device_addr, reg_addr + i);
- else
- defer = 0;
-
- if (retval == 0) {
- /*
- * Set I2C transaction and write data
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_LENGTH(16) |
- AUX_TX_COMM_I2C_TRANSACTION |
- AUX_TX_COMM_READ;
- writel(reg, dp->reg_base +
- ANALOGIX_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = analogix_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
- }
- /* Check if Rx sends defer */
- reg = readl(dp->reg_base + ANALOGIX_DP_AUX_RX_COMM);
- if (reg == AUX_RX_COMM_AUX_DEFER ||
- reg == AUX_RX_COMM_I2C_DEFER) {
- dev_err(dp->dev, "Defer: %d\n\n", reg);
- defer = 1;
- }
- }
-
- for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
- reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0
- + 4 * cur_data_idx);
- edid[i + cur_data_idx] = (unsigned char)reg;
- }
- }
-
- return retval;
-}
-
void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype)
{
u32 reg;
val |= IF_EN;
writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
}
+
+ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
+ struct drm_dp_aux_msg *msg)
+{
+ u32 reg;
+ u8 *buffer = msg->buffer;
+ int timeout_loop = 0;
+ unsigned int i;
+ int num_transferred = 0;
+
+ /* Buffer size of AUX CH is 16 bytes */
+ if (WARN_ON(msg->size > 16))
+ return -E2BIG;
+
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+ switch (msg->request & ~DP_AUX_I2C_MOT) {
+ case DP_AUX_I2C_WRITE:
+ reg = AUX_TX_COMM_WRITE | AUX_TX_COMM_I2C_TRANSACTION;
+ if (msg->request & DP_AUX_I2C_MOT)
+ reg |= AUX_TX_COMM_MOT;
+ break;
+
+ case DP_AUX_I2C_READ:
+ reg = AUX_TX_COMM_READ | AUX_TX_COMM_I2C_TRANSACTION;
+ if (msg->request & DP_AUX_I2C_MOT)
+ reg |= AUX_TX_COMM_MOT;
+ break;
+
+ case DP_AUX_NATIVE_WRITE:
+ reg = AUX_TX_COMM_WRITE | AUX_TX_COMM_DP_TRANSACTION;
+ break;
+
+ case DP_AUX_NATIVE_READ:
+ reg = AUX_TX_COMM_READ | AUX_TX_COMM_DP_TRANSACTION;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ reg |= AUX_LENGTH(msg->size);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+ /* Select DPCD device address */
+ reg = AUX_ADDR_7_0(msg->address);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+ reg = AUX_ADDR_15_8(msg->address);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+ reg = AUX_ADDR_19_16(msg->address);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+ if (!(msg->request & DP_AUX_I2C_READ)) {
+ for (i = 0; i < msg->size; i++) {
+ reg = buffer[i];
+ writel(reg, dp->reg_base + ANALOGIX_DP_BUF_DATA_0 +
+ 4 * i);
+ num_transferred++;
+ }
+ }
+
+ /* Enable AUX CH operation */
+ reg = AUX_EN;
+
+ /* Zero-sized messages specify address-only transactions. */
+ if (msg->size < 1)
+ reg |= ADDR_ONLY;
+
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+
+ /* Is AUX CH command reply received? */
+ /* TODO: Wait for an interrupt instead of looping? */
+ reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+ while (!(reg & RPLY_RECEIV)) {
+ timeout_loop++;
+ if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
+ dev_err(dp->dev, "AUX CH command reply failed!\n");
+ return -ETIMEDOUT;
+ }
+ reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+ usleep_range(10, 11);
+ }
+
+ /* Clear interrupt source for AUX CH command reply */
+ writel(RPLY_RECEIV, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+ /* Clear interrupt source for AUX CH access error */
+ reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+ if (reg & AUX_ERR) {
+ writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA);
+ return -EREMOTEIO;
+ }
+
+ /* Check AUX CH error access status */
+ reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_STA);
+ if ((reg & AUX_STATUS_MASK)) {
+ dev_err(dp->dev, "AUX CH error happened: %d\n\n",
+ reg & AUX_STATUS_MASK);
+ return -EREMOTEIO;
+ }
+
+ if (msg->request & DP_AUX_I2C_READ) {
+ for (i = 0; i < msg->size; i++) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0 +
+ 4 * i);
+ buffer[i] = (unsigned char)reg;
+ num_transferred++;
+ }
+ }
+
+ /* Check if Rx sends defer */
+ reg = readl(dp->reg_base + ANALOGIX_DP_AUX_RX_COMM);
+ if (reg == AUX_RX_COMM_AUX_DEFER)
+ msg->reply = DP_AUX_NATIVE_REPLY_DEFER;
+ else if (reg == AUX_RX_COMM_I2C_DEFER)
+ msg->reply = DP_AUX_I2C_REPLY_DEFER;
+ else if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_I2C_WRITE ||
+ (msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_I2C_READ)
+ msg->reply = DP_AUX_I2C_REPLY_ACK;
+ else if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_WRITE ||
+ (msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_READ)
+ msg->reply = DP_AUX_NATIVE_REPLY_ACK;
+
+ return num_transferred;
+}
projects / kernel.git / commitdiff