i2c: ismt: fix wrong device address when unmap the data buffer

Fix the following kernel bug:

kernel BUG at drivers/iommu/intel-iommu.c:3260!
invalid opcode: 0000 [#5] PREEMPT SMP
Hardware name: Intel Corp. Harcuvar/Server, BIOS HAVLCRB0.X64.0013.D39.1608311820 08/31/2016
task: ffff880175389950 ti: ffff880176bec000 task.ti: ffff880176bec000
RIP: 0010:[<ffffffff8150a83b>]  [<ffffffff8150a83b>] intel_unmap+0x25b/0x260
RSP: 0018:ffff880176bef5e8  EFLAGS: 00010296
RAX: 0000000000000024 RBX: ffff8800773c7c88 RCX: 000000000000ce04
RDX: 0000000080000000 RSI: 0000000000000000 RDI: 0000000000000009
RBP: ffff880176bef638 R08: 0000000000000010 R09: 0000000000000004
R10: ffff880175389c78 R11: 0000000000000a4f R12: ffff8800773c7868
R13: 00000000ffffac88 R14: ffff8800773c7818 R15: 0000000000000001
FS:  00007fef21258700(0000) GS:ffff88017b5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000066d6d8 CR3: 000000007118c000 CR4: 00000000003406e0
Stack:
 00000000ffffac88 ffffffff8199867f ffff880176bef5f8 ffff880100000030
 ffff880176bef668 ffff8800773c7c88 ffff880178288098 ffff8800772c0010
 ffff8800773c7818 0000000000000001 ffff880176bef648 ffffffff8150a86e
Call Trace:
 [<ffffffff8199867f>] ? printk+0x46/0x48
 [<ffffffff8150a86e>] intel_unmap_page+0xe/0x10
 [<ffffffffa039d99b>] ismt_access+0x27b/0x8fa [i2c_ismt]
 [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0
 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80
 [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0
 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80
 [<ffffffff8143dfd0>] ? pci_bus_read_dev_vendor_id+0xf0/0xf0
 [<ffffffff8172b36c>] i2c_smbus_xfer+0xec/0x4b0
 [<ffffffff810aa4d5>] ? vprintk_emit+0x345/0x530
 [<ffffffffa038936b>] i2cdev_ioctl_smbus+0x12b/0x240 [i2c_dev]
 [<ffffffff810aa829>] ? vprintk_default+0x29/0x40
 [<ffffffffa0389b33>] i2cdev_ioctl+0x63/0x1ec [i2c_dev]
 [<ffffffff811b04c8>] do_vfs_ioctl+0x328/0x5d0
 [<ffffffff8119d8ec>] ? vfs_write+0x11c/0x190
 [<ffffffff8109d449>] ? rt_up_read+0x19/0x20
 [<ffffffff811b07f1>] SyS_ioctl+0x81/0xa0
 [<ffffffff819a351b>] system_call_fastpath+0x16/0x6e

This happen When run "i2cdetect -y 0" detect SMBus iSMT adapter.

After finished I2C block read/write, when unmap the data buffer,
a wrong device address was pass to dma_unmap_single().

To fix this, give dma_unmap_single() the "dev" parameter, just like
what dma_map_single() does, then unmap can find the right devices.

Fixes: a8a6b2c3d251 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller")
Signed-off-by: Liwei Song <liwei.song@windriver.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index f573448d2132161d4839a17d11afb1c1f4104188..e98e44e584a44a6e17dc3af00ae1f02ce50ae95b 100644 (file)
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -584,7 +584,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 
        /* unmap the data buffer */
        if (dma_size != 0)
-               dma_unmap_single(&adap->dev, dma_addr, dma_size, dma_direction);
+               dma_unmap_single(dev, dma_addr, dma_size, dma_direction);
 
        if (unlikely(!time_left)) {
                dev_err(dev, "completion wait timed out\n");