igb: Add support functions to access thermal data.

Some of our devices have internal sensors for reporting thermal data.
This patch creates the interface to the sensors for exporting via sysfs.
Subsequent patch will actually export the data.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
index 67bd9f93c3cc9ae06bdf97112ff04ae40c74e9cc..caf6abf9abef673e14daf81bf01ab4189f58902c 100644 (file)
--- a/drivers/net/ethernet/intel/igb/e1000_82575.h
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
@@ -266,5 +266,12 @@ u16 igb_rxpbs_adjust_82580(u32 data);
 s32 igb_set_eee_i350(struct e1000_hw *);
 
 #define E1000_I2C_THERMAL_SENSOR_ADDR  0xF8
-
+#define E1000_EMC_INTERNAL_DATA                0x00
+#define E1000_EMC_INTERNAL_THERM_LIMIT 0x20
+#define E1000_EMC_DIODE1_DATA          0x01
+#define E1000_EMC_DIODE1_THERM_LIMIT   0x19
+#define E1000_EMC_DIODE2_DATA          0x23
+#define E1000_EMC_DIODE2_THERM_LIMIT   0x1A
+#define E1000_EMC_DIODE3_DATA          0x2A
+#define E1000_EMC_DIODE3_THERM_LIMIT   0x30
 #endif

diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 446678ec9fe6ae6fc64058ee88477d3a69ec4ee4..9b7ef93efd7974ca18f20de2cdc69e7300f58abe 100644 (file)
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -675,6 +675,18 @@
 #define NVM_COMB_VER_SHFT               8
 #define NVM_VER_INVALID            0xFFFF
 #define NVM_ETRACK_SHIFT               16
+#define NVM_ETS_CFG                    0x003E
+#define NVM_ETS_LTHRES_DELTA_MASK      0x07C0
+#define NVM_ETS_LTHRES_DELTA_SHIFT     6
+#define NVM_ETS_TYPE_MASK              0x0038
+#define NVM_ETS_TYPE_SHIFT             3
+#define NVM_ETS_TYPE_EMC               0x000
+#define NVM_ETS_NUM_SENSORS_MASK       0x0007
+#define NVM_ETS_DATA_LOC_MASK          0x3C00
+#define NVM_ETS_DATA_LOC_SHIFT         10
+#define NVM_ETS_DATA_INDEX_MASK                0x0300
+#define NVM_ETS_DATA_INDEX_SHIFT       8
+#define NVM_ETS_DATA_HTHRESH_MASK      0x00FF
 
 #define E1000_NVM_CFG_DONE_PORT_0  0x040000 /* MNG config cycle done */
 #define E1000_NVM_CFG_DONE_PORT_1  0x080000 /* ...for second port */

diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index 75312ba10d563d50d68e82c820365d940007d3de..837a274b74610acb834374b6eb5c74d3ccd91d30 100644 (file)
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -356,6 +356,19 @@ struct e1000_nvm_operations {
        s32  (*valid_led_default)(struct e1000_hw *, u16 *);
 };
 
+#define E1000_MAX_SENSORS              3
+
+struct e1000_thermal_diode_data {
+       u8 location;
+       u8 temp;
+       u8 caution_thresh;
+       u8 max_op_thresh;
+};
+
+struct e1000_thermal_sensor_data {
+       struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS];
+};
+
 struct e1000_info {
        s32 (*get_invariants)(struct e1000_hw *);
        struct e1000_mac_operations *mac_ops;
@@ -401,6 +414,7 @@ struct e1000_mac_info {
        bool report_tx_early;
        bool serdes_has_link;
        bool tx_pkt_filtering;
+       struct e1000_thermal_sensor_data thermal_sensor_data;
 };
 
 struct e1000_phy_info {

diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index 31c3e2f4f58c366b0c7583c4929dd1c6704b5b36..889de261844dc4255d9e41425cc94464839f11e1 100644 (file)
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -132,6 +132,14 @@
 
 /* Split and Replication RX Control - RW */
 #define E1000_RXPBS    0x02404  /* Rx Packet Buffer Size - RW */
+
+/* Thermal sensor configuration and status registers */
+#define E1000_THMJT    0x08100 /* Junction Temperature */
+#define E1000_THLOWTC  0x08104 /* Low Threshold Control */
+#define E1000_THMIDTC  0x08108 /* Mid Threshold Control */
+#define E1000_THHIGHTC 0x0810C /* High Threshold Control */
+#define E1000_THSTAT   0x08110 /* Thermal Sensor Status */
+
 /*
  * Convenience macros
  *