]> git.baikalelectronics.ru Git - kernel.git/commitdiff
regulator: qcom: Add labibb driver
authorNisha Kumari <nishakumari@codeaurora.org>
Mon, 22 Jun 2020 12:41:10 +0000 (18:11 +0530)
committerMark Brown <broonie@kernel.org>
Wed, 15 Jul 2020 14:47:16 +0000 (15:47 +0100)
Qualcomm platforms have LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost)
regulators, labibb for short, which are used as power supply for
LCD Mode displays.

This patch adds labibb regulator driver for pmi8998 PMIC, found on
SDM845 platforms.

  [sumits: reworked the driver design as per upstream review]

Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://lore.kernel.org/r/20200622124110.20971-5-sumit.semwal@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/Kconfig
drivers/regulator/Makefile
drivers/regulator/qcom-labibb-regulator.c [new file with mode: 0644]

index 64dc71c1e3d753de6fa987cdb312c02a13d96b3d..6e1cfaf01d28b8e3b1acba89835afac7d6d4819d 100644 (file)
@@ -1223,5 +1223,15 @@ config REGULATOR_WM8994
          This driver provides support for the voltage regulators on the
          WM8994 CODEC.
 
+config REGULATOR_QCOM_LABIBB
+       tristate "QCOM LAB/IBB regulator support"
+       depends on SPMI || COMPILE_TEST
+       help
+         This driver supports Qualcomm's LAB/IBB regulators present on the
+         Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
+         based PMIC implementations. LAB can be used as positive
+         boost regulator and IBB can be used as a negative boost regulator
+         for LCD display panel.
+
 endif
 
index 6adfe769a47c973c39f6751fdbb13b5738cb75b1..aa8a50424f4a730abdcfb84f69cf6653c41ef30b 100644 (file)
@@ -90,6 +90,7 @@ obj-$(CONFIG_REGULATOR_MT6323)        += mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c
new file mode 100644 (file)
index 0000000..8c7dd19
--- /dev/null
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2020, The Linux Foundation. All rights reserved.
+
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define REG_PERPH_TYPE                  0x04
+
+#define QCOM_LAB_TYPE                  0x24
+#define QCOM_IBB_TYPE                  0x20
+
+#define PMI8998_LAB_REG_BASE           0xde00
+#define PMI8998_IBB_REG_BASE           0xdc00
+
+#define REG_LABIBB_STATUS1             0x08
+#define REG_LABIBB_ENABLE_CTL          0x46
+#define LABIBB_STATUS1_VREG_OK_BIT     BIT(7)
+#define LABIBB_CONTROL_ENABLE          BIT(7)
+
+#define LAB_ENABLE_CTL_MASK            BIT(7)
+#define IBB_ENABLE_CTL_MASK            (BIT(7) | BIT(6))
+
+#define LABIBB_OFF_ON_DELAY            1000
+#define LAB_ENABLE_TIME                        (LABIBB_OFF_ON_DELAY * 2)
+#define IBB_ENABLE_TIME                        (LABIBB_OFF_ON_DELAY * 10)
+#define LABIBB_POLL_ENABLED_TIME       1000
+
+struct labibb_regulator {
+       struct regulator_desc           desc;
+       struct device                   *dev;
+       struct regmap                   *regmap;
+       struct regulator_dev            *rdev;
+       u16                             base;
+       u8                              type;
+};
+
+struct labibb_regulator_data {
+       const char                      *name;
+       u8                              type;
+       u16                             base;
+       struct regulator_desc           *desc;
+};
+
+static struct regulator_ops qcom_labibb_ops = {
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .is_enabled             = regulator_is_enabled_regmap,
+};
+
+static struct regulator_desc pmi8998_lab_desc = {
+       .enable_mask            = LAB_ENABLE_CTL_MASK,
+       .enable_reg             = (PMI8998_LAB_REG_BASE + REG_LABIBB_ENABLE_CTL),
+       .enable_val             = LABIBB_CONTROL_ENABLE,
+       .enable_time            = LAB_ENABLE_TIME,
+       .poll_enabled_time      = LABIBB_POLL_ENABLED_TIME,
+       .off_on_delay           = LABIBB_OFF_ON_DELAY,
+       .owner                  = THIS_MODULE,
+       .type                   = REGULATOR_VOLTAGE,
+       .ops                    = &qcom_labibb_ops,
+};
+
+static struct regulator_desc pmi8998_ibb_desc = {
+       .enable_mask            = IBB_ENABLE_CTL_MASK,
+       .enable_reg             = (PMI8998_IBB_REG_BASE + REG_LABIBB_ENABLE_CTL),
+       .enable_val             = LABIBB_CONTROL_ENABLE,
+       .enable_time            = IBB_ENABLE_TIME,
+       .poll_enabled_time      = LABIBB_POLL_ENABLED_TIME,
+       .off_on_delay           = LABIBB_OFF_ON_DELAY,
+       .owner                  = THIS_MODULE,
+       .type                   = REGULATOR_VOLTAGE,
+       .ops                    = &qcom_labibb_ops,
+};
+
+static const struct labibb_regulator_data pmi8998_labibb_data[] = {
+       {"lab", QCOM_LAB_TYPE, PMI8998_LAB_REG_BASE, &pmi8998_lab_desc},
+       {"ibb", QCOM_IBB_TYPE, PMI8998_IBB_REG_BASE, &pmi8998_ibb_desc},
+       { },
+};
+
+static const struct of_device_id qcom_labibb_match[] = {
+       { .compatible = "qcom,pmi8998-lab-ibb", .data = &pmi8998_labibb_data},
+       { },
+};
+MODULE_DEVICE_TABLE(of, qcom_labibb_match);
+
+static int qcom_labibb_regulator_probe(struct platform_device *pdev)
+{
+       struct labibb_regulator *vreg;
+       struct device *dev = &pdev->dev;
+       struct regulator_config cfg = {};
+
+       const struct of_device_id *match;
+       const struct labibb_regulator_data *reg_data;
+       struct regmap *reg_regmap;
+       unsigned int type;
+       int ret;
+
+       reg_regmap = dev_get_regmap(pdev->dev.parent, NULL);
+       if (!reg_regmap) {
+               dev_err(&pdev->dev, "Couldn't get parent's regmap\n");
+               return -ENODEV;
+       }
+
+       match = of_match_device(qcom_labibb_match, &pdev->dev);
+       if (!match)
+               return -ENODEV;
+
+       for (reg_data = match->data; reg_data->name; reg_data++) {
+
+               /* Validate if the type of regulator is indeed
+                * what's mentioned in DT.
+                */
+               ret = regmap_read(reg_regmap, reg_data->base + REG_PERPH_TYPE,
+                                 &type);
+               if (ret < 0) {
+                       dev_err(dev,
+                               "Peripheral type read failed ret=%d\n",
+                               ret);
+                       return -EINVAL;
+               }
+
+               if (WARN_ON((type != QCOM_LAB_TYPE) && (type != QCOM_IBB_TYPE)) ||
+                   WARN_ON(type != reg_data->type))
+                       return -EINVAL;
+
+               vreg  = devm_kzalloc(&pdev->dev, sizeof(*vreg),
+                                          GFP_KERNEL);
+               if (!vreg)
+                       return -ENOMEM;
+
+               vreg->regmap = reg_regmap;
+               vreg->dev = dev;
+               vreg->base = reg_data->base;
+               vreg->type = reg_data->type;
+
+               memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc));
+               vreg->desc.of_match = reg_data->name;
+               vreg->desc.name = reg_data->name;
+
+               cfg.dev = vreg->dev;
+               cfg.driver_data = vreg;
+               cfg.regmap = vreg->regmap;
+
+               vreg->rdev = devm_regulator_register(vreg->dev, &vreg->desc,
+                                                       &cfg);
+
+               if (IS_ERR(vreg->rdev)) {
+                       dev_err(dev, "qcom_labibb: error registering %s : %d\n",
+                                       reg_data->name, ret);
+                       return PTR_ERR(vreg->rdev);
+               }
+       }
+
+       return 0;
+}
+
+static struct platform_driver qcom_labibb_regulator_driver = {
+       .driver = {
+               .name = "qcom-lab-ibb-regulator",
+               .of_match_table = qcom_labibb_match,
+       },
+       .probe = qcom_labibb_regulator_probe,
+};
+module_platform_driver(qcom_labibb_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm labibb driver");
+MODULE_AUTHOR("Nisha Kumari <nishakumari@codeaurora.org>");
+MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>");
+MODULE_LICENSE("GPL v2");