mx53loco: Remove unused mx53loco_video.c file

Since commit 28c230cadcbb ("video: Drop references to CONFIG_VIDEO et al")
the mx53loco_video.c is no longer used.

Remove the unused file.

Signed-off-by: Fabio Estevam <festevam@denx.de>

diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c
deleted file mode 100644 (file)
index ff3fc8c..0000000
--- a/board/freescale/mx53loco/mx53loco_video.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- * Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <common.h>
-#include <env.h>
-#include <linux/list.h>
-#include <asm/gpio.h>
-#include <asm/arch/iomux-mx53.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-#define MX53LOCO_LCD_POWER             IMX_GPIO_NR(3, 24)
-
-static struct fb_videomode const claa_wvga = {
-       .name           = "CLAA07LC0ACW",
-       .refresh        = 57,
-       .xres           = 800,
-       .yres           = 480,
-       .pixclock       = 37037,
-       .left_margin    = 40,
-       .right_margin   = 60,
-       .upper_margin   = 10,
-       .lower_margin   = 10,
-       .hsync_len      = 20,
-       .vsync_len      = 10,
-       .sync           = 0,
-       .vmode          = FB_VMODE_NONINTERLACED
-};
-
-static struct fb_videomode const seiko_wvga = {
-       .name           = "Seiko-43WVF1G",
-       .refresh        = 60,
-       .xres           = 800,
-       .yres           = 480,
-       .pixclock       = 29851, /* picosecond (33.5 MHz) */
-       .left_margin    = 89,
-       .right_margin   = 164,
-       .upper_margin   = 23,
-       .lower_margin   = 10,
-       .hsync_len      = 10,
-       .vsync_len      = 10,
-       .sync           = 0,
-};
-
-void setup_iomux_lcd(void)
-{
-       static const iomux_v3_cfg_t lcd_pads[] = {
-               MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
-               MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
-               MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
-               MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
-               MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
-               MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
-               MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
-               MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
-               MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
-               MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
-               MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
-               MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
-               MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
-               MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
-               MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
-               MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
-               MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
-               MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
-               MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
-               MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
-               MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
-               MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
-               MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
-               MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
-               MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
-               MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
-               MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
-               MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
-       };
-
-       imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
-
-       /* Turn on GPIO backlight */
-       imx_iomux_v3_setup_pad(MX53_PAD_EIM_D24__GPIO3_24);
-       gpio_direction_output(MX53LOCO_LCD_POWER, 1);
-
-       /* Turn on display contrast */
-       imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
-       gpio_direction_output(IMX_GPIO_NR(1, 1), 1);
-}
-
-int board_video_skip(void)
-{
-       int ret;
-       char const *e = env_get("panel");
-
-       if (e) {
-               if (strcmp(e, "seiko") == 0) {
-                       ret = ipuv3_fb_init(&seiko_wvga, 0, IPU_PIX_FMT_RGB24);
-                       if (ret)
-                               printf("Seiko cannot be configured: %d\n", ret);
-                       return ret;
-               }
-       }
-
-       /*
-        * 'panel' env variable not found or has different value than 'seiko'
-        *  Defaulting to claa lcd.
-        */
-       ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
-       if (ret)
-               printf("CLAA cannot be configured: %d\n", ret);
-       return ret;
-}