help
Select to enable support for Realtek Ethernet switch chips.
+config NET_DSA_REALTEK_MDIO
+ tristate "Realtek MDIO connected switch driver"
+ depends on NET_DSA_REALTEK
+ default y
+ help
+ Select to enable support for registering switches configured
+ through MDIO.
+
config NET_DSA_REALTEK_SMI
tristate "Realtek SMI connected switch driver"
depends on NET_DSA_REALTEK
tristate "Realtek RTL8365MB switch subdriver"
default y
depends on NET_DSA_REALTEK
- depends on NET_DSA_REALTEK_SMI
+ depends on NET_DSA_REALTEK_SMI || NET_DSA_REALTEK_MDIO
select NET_DSA_TAG_RTL8_4
help
Select to enable support for Realtek RTL8365MB
tristate "Realtek RTL8366RB switch subdriver"
default y
depends on NET_DSA_REALTEK
- depends on NET_DSA_REALTEK_SMI
+ depends on NET_DSA_REALTEK_SMI || NET_DSA_REALTEK_MDIO
select NET_DSA_TAG_RTL4_A
help
Select to enable support for Realtek RTL8366RB
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_NET_DSA_REALTEK_MDIO) += realtek-mdio.o
obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o
rtl8366-objs := rtl8366-core.o rtl8366rb.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Realtek MDIO interface driver
+ *
+ * ASICs we intend to support with this driver:
+ *
+ * RTL8366 - The original version, apparently
+ * RTL8369 - Similar enough to have the same datsheet as RTL8366
+ * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
+ * different register layout from the other two
+ * RTL8366S - Is this "RTL8366 super"?
+ * RTL8367 - Has an OpenWRT driver as well
+ * RTL8368S - Seems to be an alternative name for RTL8366RB
+ * RTL8370 - Also uses SMI
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include "realtek.h"
+
+/* Read/write via mdiobus */
+#define REALTEK_MDIO_CTRL0_REG 31
+#define REALTEK_MDIO_START_REG 29
+#define REALTEK_MDIO_CTRL1_REG 21
+#define REALTEK_MDIO_ADDRESS_REG 23
+#define REALTEK_MDIO_DATA_WRITE_REG 24
+#define REALTEK_MDIO_DATA_READ_REG 25
+
+#define REALTEK_MDIO_START_OP 0xFFFF
+#define REALTEK_MDIO_ADDR_OP 0x000E
+#define REALTEK_MDIO_READ_OP 0x0001
+#define REALTEK_MDIO_WRITE_OP 0x0003
+
+static int realtek_mdio_write(void *ctx, u32 reg, u32 val)
+{
+ struct realtek_priv *priv = ctx;
+ struct mii_bus *bus = priv->bus;
+ int ret;
+
+ mutex_lock(&bus->mdio_lock);
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_DATA_WRITE_REG, val);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_WRITE_OP);
+
+out_unlock:
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static int realtek_mdio_read(void *ctx, u32 reg, u32 *val)
+{
+ struct realtek_priv *priv = ctx;
+ struct mii_bus *bus = priv->bus;
+ int ret;
+
+ mutex_lock(&bus->mdio_lock);
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_READ_OP);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->read(bus, priv->mdio_addr, REALTEK_MDIO_DATA_READ_REG);
+ if (ret >= 0) {
+ *val = ret;
+ ret = 0;
+ }
+
+out_unlock:
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static const struct regmap_config realtek_mdio_regmap_config = {
+ .reg_bits = 10, /* A4..A0 R4..R0 */
+ .val_bits = 16,
+ .reg_stride = 1,
+ /* PHY regs are at 0x8000 */
+ .max_register = 0xffff,
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+ .reg_read = realtek_mdio_read,
+ .reg_write = realtek_mdio_write,
+ .cache_type = REGCACHE_NONE,
+};
+
+static int realtek_mdio_probe(struct mdio_device *mdiodev)
+{
+ struct realtek_priv *priv;
+ struct device *dev = &mdiodev->dev;
+ const struct realtek_variant *var;
+ int ret;
+ struct device_node *np;
+
+ var = of_device_get_match_data(dev);
+ if (!var)
+ return -EINVAL;
+
+ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->map = devm_regmap_init(dev, NULL, priv, &realtek_mdio_regmap_config);
+ if (IS_ERR(priv->map)) {
+ ret = PTR_ERR(priv->map);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ priv->mdio_addr = mdiodev->addr;
+ priv->bus = mdiodev->bus;
+ priv->dev = &mdiodev->dev;
+ priv->chip_data = (void *)priv + sizeof(*priv);
+
+ priv->clk_delay = var->clk_delay;
+ priv->cmd_read = var->cmd_read;
+ priv->cmd_write = var->cmd_write;
+ priv->ops = var->ops;
+
+ priv->write_reg_noack = realtek_mdio_write;
+
+ np = dev->of_node;
+
+ dev_set_drvdata(dev, priv);
+
+ /* TODO: if power is software controlled, set up any regulators here */
+ priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+
+ ret = priv->ops->detect(priv);
+ if (ret) {
+ dev_err(dev, "unable to detect switch\n");
+ return ret;
+ }
+
+ priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->dev = dev;
+ priv->ds->num_ports = priv->num_ports;
+ priv->ds->priv = priv;
+ priv->ds->ops = var->ds_ops_mdio;
+
+ ret = dsa_register_switch(priv->ds);
+ if (ret) {
+ dev_err(priv->dev, "unable to register switch ret = %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void realtek_mdio_remove(struct mdio_device *mdiodev)
+{
+ struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
+
+ if (!priv)
+ return;
+
+ dsa_unregister_switch(priv->ds);
+
+ dev_set_drvdata(&mdiodev->dev, NULL);
+}
+
+static void realtek_mdio_shutdown(struct mdio_device *mdiodev)
+{
+ struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
+
+ if (!priv)
+ return;
+
+ dsa_switch_shutdown(priv->ds);
+
+ dev_set_drvdata(&mdiodev->dev, NULL);
+}
+
+static const struct of_device_id realtek_mdio_of_match[] = {
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
+ { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, },
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
+ { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, },
+#endif
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, realtek_mdio_of_match);
+
+static struct mdio_driver realtek_mdio_driver = {
+ .mdiodrv.driver = {
+ .name = "realtek-mdio",
+ .of_match_table = of_match_ptr(realtek_mdio_of_match),
+ },
+ .probe = realtek_mdio_probe,
+ .remove = realtek_mdio_remove,
+ .shutdown = realtek_mdio_shutdown,
+};
+
+mdio_module_driver(realtek_mdio_driver);
+
+MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>");
+MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface");
+MODULE_LICENSE("GPL");
priv->ds->num_ports = priv->num_ports;
priv->ds->priv = priv;
- priv->ds->ops = var->ds_ops;
+ priv->ds->ops = var->ds_ops_smi;
ret = dsa_register_switch(priv->ds);
if (ret) {
dev_err_probe(dev, ret, "unable to register switch\n");
struct gpio_desc *mdio;
struct regmap *map;
struct mii_bus *slave_mii_bus;
+ struct mii_bus *bus;
+ int mdio_addr;
unsigned int clk_delay;
u8 cmd_read;
};
struct realtek_variant {
- const struct dsa_switch_ops *ds_ops;
+ const struct dsa_switch_ops *ds_ops_smi;
+ const struct dsa_switch_ops *ds_ops_mdio;
const struct realtek_ops *ops;
unsigned int clk_delay;
u8 cmd_read;
return 0;
}
+static int rtl8365mb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+ return rtl8365mb_phy_read(ds->priv, phy, regnum);
+}
+
+static int rtl8365mb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum,
+ u16 val)
+{
+ return rtl8365mb_phy_write(ds->priv, phy, regnum, val);
+}
+
static enum dsa_tag_protocol
rtl8365mb_get_tag_protocol(struct dsa_switch *ds, int port,
enum dsa_tag_protocol mp)
return 0;
}
-static const struct dsa_switch_ops rtl8365mb_switch_ops = {
+static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = {
+ .get_tag_protocol = rtl8365mb_get_tag_protocol,
+ .setup = rtl8365mb_setup,
+ .teardown = rtl8365mb_teardown,
+ .phylink_validate = rtl8365mb_phylink_validate,
+ .phylink_mac_config = rtl8365mb_phylink_mac_config,
+ .phylink_mac_link_down = rtl8365mb_phylink_mac_link_down,
+ .phylink_mac_link_up = rtl8365mb_phylink_mac_link_up,
+ .port_stp_state_set = rtl8365mb_port_stp_state_set,
+ .get_strings = rtl8365mb_get_strings,
+ .get_ethtool_stats = rtl8365mb_get_ethtool_stats,
+ .get_sset_count = rtl8365mb_get_sset_count,
+ .get_eth_phy_stats = rtl8365mb_get_phy_stats,
+ .get_eth_mac_stats = rtl8365mb_get_mac_stats,
+ .get_eth_ctrl_stats = rtl8365mb_get_ctrl_stats,
+ .get_stats64 = rtl8365mb_get_stats64,
+};
+
+static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = {
.get_tag_protocol = rtl8365mb_get_tag_protocol,
.setup = rtl8365mb_setup,
.teardown = rtl8365mb_teardown,
.phylink_mac_config = rtl8365mb_phylink_mac_config,
.phylink_mac_link_down = rtl8365mb_phylink_mac_link_down,
.phylink_mac_link_up = rtl8365mb_phylink_mac_link_up,
+ .phy_read = rtl8365mb_dsa_phy_read,
+ .phy_write = rtl8365mb_dsa_phy_write,
.port_stp_state_set = rtl8365mb_port_stp_state_set,
.get_strings = rtl8365mb_get_strings,
.get_ethtool_stats = rtl8365mb_get_ethtool_stats,
};
const struct realtek_variant rtl8365mb_variant = {
- .ds_ops = &rtl8365mb_switch_ops,
+ .ds_ops_smi = &rtl8365mb_switch_ops_smi,
+ .ds_ops_mdio = &rtl8365mb_switch_ops_mdio,
.ops = &rtl8365mb_ops,
.clk_delay = 10,
.cmd_read = 0xb9,
return 0;
}
+static int rtl8366rb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+ return rtl8366rb_phy_read(ds->priv, phy, regnum);
+}
+
+static int rtl8366rb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum,
+ u16 val)
+{
+ return rtl8366rb_phy_write(ds->priv, phy, regnum, val);
+}
+
static int rtl8366rb_reset_chip(struct realtek_priv *priv)
{
int timeout = 10;
return 0;
}
-static const struct dsa_switch_ops rtl8366rb_switch_ops = {
+static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = {
+ .get_tag_protocol = rtl8366_get_tag_protocol,
+ .setup = rtl8366rb_setup,
+ .phylink_mac_link_up = rtl8366rb_mac_link_up,
+ .phylink_mac_link_down = rtl8366rb_mac_link_down,
+ .get_strings = rtl8366_get_strings,
+ .get_ethtool_stats = rtl8366_get_ethtool_stats,
+ .get_sset_count = rtl8366_get_sset_count,
+ .port_bridge_join = rtl8366rb_port_bridge_join,
+ .port_bridge_leave = rtl8366rb_port_bridge_leave,
+ .port_vlan_filtering = rtl8366rb_vlan_filtering,
+ .port_vlan_add = rtl8366_vlan_add,
+ .port_vlan_del = rtl8366_vlan_del,
+ .port_enable = rtl8366rb_port_enable,
+ .port_disable = rtl8366rb_port_disable,
+ .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
+ .port_bridge_flags = rtl8366rb_port_bridge_flags,
+ .port_stp_state_set = rtl8366rb_port_stp_state_set,
+ .port_fast_age = rtl8366rb_port_fast_age,
+ .port_change_mtu = rtl8366rb_change_mtu,
+ .port_max_mtu = rtl8366rb_max_mtu,
+};
+
+static const struct dsa_switch_ops rtl8366rb_switch_ops_mdio = {
.get_tag_protocol = rtl8366_get_tag_protocol,
.setup = rtl8366rb_setup,
+ .phy_read = rtl8366rb_dsa_phy_read,
+ .phy_write = rtl8366rb_dsa_phy_write,
.phylink_mac_link_up = rtl8366rb_mac_link_up,
.phylink_mac_link_down = rtl8366rb_mac_link_down,
.get_strings = rtl8366_get_strings,
};
const struct realtek_variant rtl8366rb_variant = {
- .ds_ops = &rtl8366rb_switch_ops,
+ .ds_ops_smi = &rtl8366rb_switch_ops_smi,
+ .ds_ops_mdio = &rtl8366rb_switch_ops_mdio,
.ops = &rtl8366rb_ops,
.clk_delay = 10,
.cmd_read = 0xa9,
projects / kernel.git / commitdiff