#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
-#include <soc/at91/at91_sfr.h>
#include "ohci.h"
u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
};
-struct ohci_at91_caps {
- bool suspend_ctrl;
-};
-
struct ohci_at91_priv {
struct clk *iclk;
struct clk *fclk;
struct clk *hclk;
bool clocked;
bool wakeup; /* Saved wake-up state for resume */
- const struct ohci_at91_caps *caps;
- struct regmap *sfr_regmap;
};
/* interface and function clocks; sometimes also an AHB clock */
/*-------------------------------------------------------------------------*/
-struct regmap *at91_dt_syscon_sfr(void)
-{
- struct regmap *regmap;
-
- regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
- if (IS_ERR(regmap))
- regmap = NULL;
-
- return regmap;
-}
-
static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
/* configure so an HC device and id are always provided */
goto err;
}
- ohci_at91->caps = (const struct ohci_at91_caps *)
- of_device_get_match_data(&pdev->dev);
- if (!ohci_at91->caps)
- return -ENODEV;
-
- if (ohci_at91->caps->suspend_ctrl) {
- ohci_at91->sfr_regmap = at91_dt_syscon_sfr();
- if (!ohci_at91->sfr_regmap)
- dev_warn(dev, "failed to find sfr node\n");
- }
-
board = hcd->self.controller->platform_data;
ohci = hcd_to_ohci(hcd);
ohci->num_ports = board->ports;
return IRQ_HANDLED;
}
-static const struct ohci_at91_caps at91rm9200_caps = {
- .suspend_ctrl = false,
-};
-
-static const struct ohci_at91_caps sama5d2_caps = {
- .suspend_ctrl = true,
-};
-
static const struct of_device_id at91_ohci_dt_ids[] = {
- { .compatible = "atmel,at91rm9200-ohci", .data = &at91rm9200_caps },
- { .compatible = "atmel,sama5d2-ohci", .data = &sama5d2_caps },
+ { .compatible = "atmel,at91rm9200-ohci" },
{ /* sentinel */ }
};
return 0;
}
-static int ohci_at91_port_ctrl(struct regmap *regmap, bool enable)
-{
- u32 regval;
- int ret;
-
- if (!regmap)
- return -EINVAL;
-
- ret = regmap_read(regmap, SFR_OHCIICR, ®val);
- if (ret)
- return ret;
-
- if (enable)
- regval &= ~SFR_OHCIICR_USB_SUSPEND;
- else
- regval |= SFR_OHCIICR_USB_SUSPEND;
-
- regmap_write(regmap, SFR_OHCIICR, regval);
-
- return 0;
-}
-
-static int ohci_at91_port_suspend(struct regmap *regmap)
-{
- return ohci_at91_port_ctrl(regmap, false);
-}
-
-static int ohci_at91_port_resume(struct regmap *regmap)
-{
- return ohci_at91_port_ctrl(regmap, true);
-}
-
static int __maybe_unused
ohci_hcd_at91_drv_suspend(struct device *dev)
{
ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
ohci->rh_state = OHCI_RH_HALTED;
- if (ohci_at91->caps->suspend_ctrl)
- ohci_at91_port_suspend(ohci_at91->sfr_regmap);
-
/* flush the writes */
(void) ohci_readl (ohci, &ohci->regs->control);
at91_stop_clock(ohci_at91);
at91_start_clock(ohci_at91);
- if (ohci_at91->caps->suspend_ctrl)
- ohci_at91_port_resume(ohci_at91->sfr_regmap);
-
ohci_resume(hcd, false);
return 0;
}
+++ /dev/null
-/*
- * Header file for the Atmel DDR/SDR SDRAM Controller
- *
- * Copyright (C) 2016 Atmel Corporation
- *
- * Author: Wenyou Yang <wenyou.yang@atmel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __AT91_SFR_H__
-#define __AT91_SFR_H__
-
-#define SFR_DDRCFG 0x04 /* DDR Configuration Register */
-/* 0x08 ~ 0x0c: Reserved */
-#define SFR_OHCIICR 0x10 /* OHCI Interrupt Configuration Register */
-#define SFR_OHCIISR 0x14 /* OHCI Interrupt Status Register */
-
-#define SFR_OHCIICR_SUSPEND_A BIT(8)
-#define SFR_OHCIICR_SUSPEND_B BIT(9)
-#define SFR_OHCIICR_SUSPEND_C BIT(10)
-
-#define SFR_OHCIICR_USB_SUSPEND (SFR_OHCIICR_SUSPEND_A | \
- SFR_OHCIICR_SUSPEND_B | \
- SFR_OHCIICR_SUSPEND_C)
-
-#endif