]> git.baikalelectronics.ru Git - uboot.git/commitdiff
imx8mm: Sync device tree with linux-next 20220711
authorFabio Estevam <festevam@denx.de>
Fri, 15 Jul 2022 16:57:19 +0000 (13:57 -0300)
committerStefano Babic <sbabic@denx.de>
Mon, 25 Jul 2022 14:12:00 +0000 (16:12 +0200)
Sync imx8mm.dtsi device tree with linux-next 20220711.

The main motivation for doing this sync is the sha256 regression
reported by Andrey Zhizhikin [1].

The linux-next kernel has the following commit, which disables
the job ring 0 and fixes the problem:

https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20220715&id=dc9c1ceb555ff661e6fc1081434600771f29657c

[1] https://lore.kernel.org/u-boot/AM6PR06MB46912207D9460CD9924F35DAA68B9@AM6PR06MB4691.eurprd06.prod.outlook.com/T/#t

Signed-off-by: Fabio Estevam <festevam@denx.de>
arch/arm/dts/imx8mm.dtsi
include/dt-bindings/power/imx8mm-power.h

index 724f6ddbf397c527e707a4e26140c8f21845a6c7..afb90f59c83c5df18fa78e35fc409c621e6501b9 100644 (file)
@@ -4,11 +4,11 @@
  */
 
 #include <dt-bindings/clock/imx8mm-clock.h>
-#include <dt-bindings/power/imx8mm-power.h>
-#include <dt-bindings/reset/imx8mq-reset.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
 #include <dt-bindings/thermal/thermal.h>
 
 #include "imx8mm-pinfunc.h"
                        clock-latency = <61036>; /* two CLK32 periods */
                        clocks = <&clk IMX8MM_CLK_ARM>;
                        enable-method = "psci";
+                       i-cache-size = <0x8000>;
+                       i-cache-line-size = <64>;
+                       i-cache-sets = <256>;
+                       d-cache-size = <0x8000>;
+                       d-cache-line-size = <64>;
+                       d-cache-sets = <128>;
                        next-level-cache = <&A53_L2>;
                        operating-points-v2 = <&a53_opp_table>;
                        nvmem-cells = <&cpu_speed_grade>;
                        clock-latency = <61036>; /* two CLK32 periods */
                        clocks = <&clk IMX8MM_CLK_ARM>;
                        enable-method = "psci";
+                       i-cache-size = <0x8000>;
+                       i-cache-line-size = <64>;
+                       i-cache-sets = <256>;
+                       d-cache-size = <0x8000>;
+                       d-cache-line-size = <64>;
+                       d-cache-sets = <128>;
                        next-level-cache = <&A53_L2>;
                        operating-points-v2 = <&a53_opp_table>;
                        cpu-idle-states = <&cpu_pd_wait>;
                        clock-latency = <61036>; /* two CLK32 periods */
                        clocks = <&clk IMX8MM_CLK_ARM>;
                        enable-method = "psci";
+                       i-cache-size = <0x8000>;
+                       i-cache-line-size = <64>;
+                       i-cache-sets = <256>;
+                       d-cache-size = <0x8000>;
+                       d-cache-line-size = <64>;
+                       d-cache-sets = <128>;
                        next-level-cache = <&A53_L2>;
                        operating-points-v2 = <&a53_opp_table>;
                        cpu-idle-states = <&cpu_pd_wait>;
                        clock-latency = <61036>; /* two CLK32 periods */
                        clocks = <&clk IMX8MM_CLK_ARM>;
                        enable-method = "psci";
+                       i-cache-size = <0x8000>;
+                       i-cache-line-size = <64>;
+                       i-cache-sets = <256>;
+                       d-cache-size = <0x8000>;
+                       d-cache-line-size = <64>;
+                       d-cache-sets = <128>;
                        next-level-cache = <&A53_L2>;
                        operating-points-v2 = <&a53_opp_table>;
                        cpu-idle-states = <&cpu_pd_wait>;
 
                A53_L2: l2-cache0 {
                        compatible = "cache";
+                       cache-level = <2>;
+                       cache-size = <0x80000>;
+                       cache-line-size = <64>;
+                       cache-sets = <512>;
                };
        };
 
        clk_ext4: clock-ext4 {
                compatible = "fixed-clock";
                #clock-cells = <0>;
-               clock-frequency= <133000000>;
+               clock-frequency = <133000000>;
                clock-output-names = "clk_ext4";
        };
 
        };
 
        pmu {
-               compatible = "arm,armv8-pmuv3";
+               compatible = "arm,cortex-a53-pmu";
                interrupts = <GIC_PPI 7
                             (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-               interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
        };
 
        timer {
                clock-names = "main_clk";
        };
 
-       soc@0 {
-               compatible = "simple-bus";
+       soc: soc@0 {
+               compatible = "fsl,imx8mm-soc", "simple-bus";
                #address-cells = <1>;
                #size-cells = <1>;
                ranges = <0x0 0x0 0x0 0x3e000000>;
+               dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+               nvmem-cells = <&imx8mm_uid>;
+               nvmem-cell-names = "soc_unique_id";
 
                aips1: bus@30000000 {
                        compatible = "fsl,aips-bus", "simple-bus";
                        #size-cells = <1>;
                        ranges = <0x30000000 0x30000000 0x400000>;
 
-                       sai1: sai@30010000 {
-                               #sound-dai-cells = <0>;
-                               compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
-                               reg = <0x30010000 0x10000>;
-                               interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
-                                        <&clk IMX8MM_CLK_SAI1_ROOT>,
-                                        <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
-                               clock-names = "bus", "mclk1", "mclk2", "mclk3";
-                               dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
-                       };
+                       spba2: spba-bus@30000000 {
+                               compatible = "fsl,spba-bus", "simple-bus";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               reg = <0x30000000 0x100000>;
+                               ranges;
+
+                               sai1: sai@30010000 {
+                                       #sound-dai-cells = <0>;
+                                       compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+                                       reg = <0x30010000 0x10000>;
+                                       interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+                                                <&clk IMX8MM_CLK_SAI1_ROOT>,
+                                                <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+                                       clock-names = "bus", "mclk1", "mclk2", "mclk3";
+                                       dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
 
-                       sai2: sai@30020000 {
-                               #sound-dai-cells = <0>;
-                               compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
-                               reg = <0x30020000 0x10000>;
-                               interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
-                                       <&clk IMX8MM_CLK_SAI2_ROOT>,
-                                       <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
-                               clock-names = "bus", "mclk1", "mclk2", "mclk3";
-                               dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
-                       };
+                               sai2: sai@30020000 {
+                                       #sound-dai-cells = <0>;
+                                       compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+                                       reg = <0x30020000 0x10000>;
+                                       interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+                                               <&clk IMX8MM_CLK_SAI2_ROOT>,
+                                               <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+                                       clock-names = "bus", "mclk1", "mclk2", "mclk3";
+                                       dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
 
-                       sai3: sai@30030000 {
-                               #sound-dai-cells = <0>;
-                               compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
-                               reg = <0x30030000 0x10000>;
-                               interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
-                                        <&clk IMX8MM_CLK_SAI3_ROOT>,
-                                        <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
-                               clock-names = "bus", "mclk1", "mclk2", "mclk3";
-                               dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
-                       };
+                               sai3: sai@30030000 {
+                                       #sound-dai-cells = <0>;
+                                       compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+                                       reg = <0x30030000 0x10000>;
+                                       interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+                                                <&clk IMX8MM_CLK_SAI3_ROOT>,
+                                                <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+                                       clock-names = "bus", "mclk1", "mclk2", "mclk3";
+                                       dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
 
-                       sai5: sai@30050000 {
-                               #sound-dai-cells = <0>;
-                               compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
-                               reg = <0x30050000 0x10000>;
-                               interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
-                                        <&clk IMX8MM_CLK_SAI5_ROOT>,
-                                        <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
-                               clock-names = "bus", "mclk1", "mclk2", "mclk3";
-                               dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
-                       };
+                               sai5: sai@30050000 {
+                                       #sound-dai-cells = <0>;
+                                       compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+                                       reg = <0x30050000 0x10000>;
+                                       interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+                                                <&clk IMX8MM_CLK_SAI5_ROOT>,
+                                                <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+                                       clock-names = "bus", "mclk1", "mclk2", "mclk3";
+                                       dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
 
-                       sai6: sai@30060000 {
-                               #sound-dai-cells = <0>;
-                               compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
-                               reg = <0x30060000 0x10000>;
-                               interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
-                                        <&clk IMX8MM_CLK_SAI6_ROOT>,
-                                        <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
-                               clock-names = "bus", "mclk1", "mclk2", "mclk3";
-                               dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
-                       };
+                               sai6: sai@30060000 {
+                                       #sound-dai-cells = <0>;
+                                       compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+                                       reg = <0x30060000 0x10000>;
+                                       interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+                                                <&clk IMX8MM_CLK_SAI6_ROOT>,
+                                                <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+                                       clock-names = "bus", "mclk1", "mclk2", "mclk3";
+                                       dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
 
-                       micfil: audio-controller@30080000 {
-                               compatible = "fsl,imx8mm-micfil";
-                               reg = <0x30080000 0x10000>;
-                               interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-                                            <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-                                            <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-                                            <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_PDM_IPG>,
-                                        <&clk IMX8MM_CLK_PDM_ROOT>,
-                                        <&clk IMX8MM_AUDIO_PLL1_OUT>,
-                                        <&clk IMX8MM_AUDIO_PLL2_OUT>,
-                                        <&clk IMX8MM_CLK_EXT3>;
-                               clock-names = "ipg_clk", "ipg_clk_app",
-                                             "pll8k", "pll11k", "clkext3";
-                               dmas = <&sdma2 24 25 0x80000000>;
-                               dma-names = "rx";
-                               status = "disabled";
-                       };
+                               micfil: audio-controller@30080000 {
+                                       compatible = "fsl,imx8mm-micfil";
+                                       reg = <0x30080000 0x10000>;
+                                       interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                                                    <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                                                    <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                                                    <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+                                                <&clk IMX8MM_CLK_PDM_ROOT>,
+                                                <&clk IMX8MM_AUDIO_PLL1_OUT>,
+                                                <&clk IMX8MM_AUDIO_PLL2_OUT>,
+                                                <&clk IMX8MM_CLK_EXT3>;
+                                       clock-names = "ipg_clk", "ipg_clk_app",
+                                                     "pll8k", "pll11k", "clkext3";
+                                       dmas = <&sdma2 24 25 0x80000000>;
+                                       dma-names = "rx";
+                                       status = "disabled";
+                               };
 
-                       spdif1: spdif@30090000 {
-                               compatible = "fsl,imx35-spdif";
-                               reg = <0x30090000 0x10000>;
-                               interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
-                                        <&clk IMX8MM_CLK_24M>, /* rxtx0 */
-                                        <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
-                                        <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
-                                        <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
-                                        <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
-                                        <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
-                                        <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
-                                        <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
-                                        <&clk IMX8MM_CLK_DUMMY>; /* spba */
-                               clock-names = "core", "rxtx0",
-                                             "rxtx1", "rxtx2",
-                                             "rxtx3", "rxtx4",
-                                             "rxtx5", "rxtx6",
-                                             "rxtx7", "spba";
-                               dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
+                               spdif1: spdif@30090000 {
+                                       compatible = "fsl,imx35-spdif";
+                                       reg = <0x30090000 0x10000>;
+                                       interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
+                                                <&clk IMX8MM_CLK_24M>, /* rxtx0 */
+                                                <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
+                                                <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
+                                                <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
+                                                <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
+                                                <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
+                                                <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
+                                                <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
+                                                <&clk IMX8MM_CLK_DUMMY>; /* spba */
+                                       clock-names = "core", "rxtx0",
+                                                     "rxtx1", "rxtx2",
+                                                     "rxtx3", "rxtx4",
+                                                     "rxtx5", "rxtx6",
+                                                     "rxtx7", "spba";
+                                       dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
                        };
 
                        gpio1: gpio@30200000 {
                                #address-cells = <1>;
                                #size-cells = <1>;
 
+                               imx8mm_uid: unique-id@410 {
+                                       reg = <0x4 0x8>;
+                               };
+
                                cpu_speed_grade: speed-grade@10 {
                                        reg = <0x10 4>;
                                };
+
+                               fec_mac_address: mac-address@90 {
+                                       reg = <0x90 6>;
+                               };
                        };
 
                        anatop: anatop@30360000 {
                                        wakeup-source;
                                        status = "disabled";
                                };
+
+                               snvs_lpgpr: snvs-lpgpr {
+                                       compatible = "fsl,imx8mm-snvs-lpgpr",
+                                                    "fsl,imx7d-snvs-lpgpr";
+                               };
                        };
 
                        clk: clock-controller@30380000 {
                                                <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
                                                <&clk IMX8MM_SYS_PLL3>,
                                                <&clk IMX8MM_VIDEO_PLL1>,
-                                               <&clk IMX8MM_AUDIO_PLL1>,
-                                               <&clk IMX8MM_AUDIO_PLL2>;
+                                               <&clk IMX8MM_AUDIO_PLL1>;
                                assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
                                                         <&clk IMX8MM_ARM_PLL_OUT>,
                                                         <&clk IMX8MM_SYS_PLL3_OUT>,
                                                        <400000000>,
                                                        <750000000>,
                                                        <594000000>,
-                                                       <393216000>,
-                                                       <361267200>;
+                                                       <393216000>;
                        };
 
                        src: reset-controller@30390000 {
                        gpc: gpc@303a0000 {
                                compatible = "fsl,imx8mm-gpc";
                                reg = <0x303a0000 0x10000>;
+                               interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-parent = <&gic>;
                                interrupt-controller;
                                #interrupt-cells = <3>;
                                                #power-domain-cells = <0>;
                                                reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
                                                clocks = <&clk IMX8MM_CLK_USB_BUS>;
+                                               assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+                                               assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
                                        };
 
                                        pgc_pcie: power-domain@1 {
                                                #power-domain-cells = <0>;
                                                reg = <IMX8MM_POWER_DOMAIN_PCIE>;
                                                power-domains = <&pgc_hsiomix>;
+                                               clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
                                        };
 
                                        pgc_otg1: power-domain@2 {
                                                #power-domain-cells = <0>;
                                                reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
                                                clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
-                                                        <&clk IMX8MM_CLK_GPU_AHB>;
+                                                        <&clk IMX8MM_CLK_GPU_AHB>;
+                                               assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
+                                                                 <&clk IMX8MM_CLK_GPU_AHB>;
+                                               assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
+                                                                        <&clk IMX8MM_SYS_PLL1_800M>;
+                                               assigned-clock-rates = <800000000>, <400000000>;
                                        };
 
                                        pgc_gpu: power-domain@5 {
                                                #power-domain-cells = <0>;
                                                reg = <IMX8MM_POWER_DOMAIN_GPU>;
                                                clocks = <&clk IMX8MM_CLK_GPU_AHB>,
-                                                        <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
-                                                        <&clk IMX8MM_CLK_GPU2D_ROOT>,
-                                                        <&clk IMX8MM_CLK_GPU3D_ROOT>;
+                                                        <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+                                                        <&clk IMX8MM_CLK_GPU2D_ROOT>,
+                                                        <&clk IMX8MM_CLK_GPU3D_ROOT>;
                                                resets = <&src IMX8MQ_RESET_GPU_RESET>;
                                                power-domains = <&pgc_gpumix>;
                                        };
 
-                                       dispmix_pd: power-domain@10 {
+                                       pgc_vpumix: power-domain@6 {
+                                               #power-domain-cells = <0>;
+                                               reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
+                                               clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+                                               assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
+                                               assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
+                                       };
+
+                                       pgc_vpu_g1: power-domain@7 {
+                                               #power-domain-cells = <0>;
+                                               reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
+                                       };
+
+                                       pgc_vpu_g2: power-domain@8 {
+                                               #power-domain-cells = <0>;
+                                               reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
+                                       };
+
+                                       pgc_vpu_h1: power-domain@9 {
+                                               #power-domain-cells = <0>;
+                                               reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
+                                       };
+
+                                       pgc_dispmix: power-domain@10 {
                                                #power-domain-cells = <0>;
                                                reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
-                                               clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
-                                                        <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
-                                                        <&clk IMX8MM_CLK_DISP_APB_ROOT>;
+                                               clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+                                                        <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+                                               assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
+                                                                 <&clk IMX8MM_CLK_DISP_APB>;
+                                               assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
+                                                                        <&clk IMX8MM_SYS_PLL1_800M>;
+                                               assigned-clock-rates = <500000000>, <200000000>;
                                        };
 
-                                       mipi_pd: power-domain@11 {
+                                       pgc_mipi: power-domain@11 {
                                                #power-domain-cells = <0>;
                                                reg = <IMX8MM_POWER_DOMAIN_MIPI>;
-                                               power-domains = <&dispmix_pd>;
                                        };
                                };
                        };
                                clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
                                        <&clk IMX8MM_CLK_PWM1_ROOT>;
                                clock-names = "ipg", "per";
-                               #pwm-cells = <2>;
+                               #pwm-cells = <3>;
                                status = "disabled";
                        };
 
                                clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
                                         <&clk IMX8MM_CLK_PWM2_ROOT>;
                                clock-names = "ipg", "per";
-                               #pwm-cells = <2>;
+                               #pwm-cells = <3>;
                                status = "disabled";
                        };
 
                                clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
                                         <&clk IMX8MM_CLK_PWM3_ROOT>;
                                clock-names = "ipg", "per";
-                               #pwm-cells = <2>;
+                               #pwm-cells = <3>;
                                status = "disabled";
                        };
 
                                clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
                                         <&clk IMX8MM_CLK_PWM4_ROOT>;
                                clock-names = "ipg", "per";
-                               #pwm-cells = <2>;
+                               #pwm-cells = <3>;
                                status = "disabled";
                        };
 
                        ranges = <0x30800000 0x30800000 0x400000>,
                                 <0x8000000 0x8000000 0x10000000>;
 
-                       ecspi1: spi@30820000 {
-                               compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+                       spba1: spba-bus@30800000 {
+                               compatible = "fsl,spba-bus", "simple-bus";
                                #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0x30820000 0x10000>;
-                               interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
-                                        <&clk IMX8MM_CLK_ECSPI1_ROOT>;
-                               clock-names = "ipg", "per";
-                               dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
-                       };
+                               #size-cells = <1>;
+                               reg = <0x30800000 0x100000>;
+                               ranges;
 
-                       ecspi2: spi@30830000 {
-                               compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0x30830000 0x10000>;
-                               interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
-                                        <&clk IMX8MM_CLK_ECSPI2_ROOT>;
-                               clock-names = "ipg", "per";
-                               dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
-                       };
+                               ecspi1: spi@30820000 {
+                                       compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <0x30820000 0x10000>;
+                                       interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+                                                <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+                                       clock-names = "ipg", "per";
+                                       dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
 
-                       ecspi3: spi@30840000 {
-                               compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0x30840000 0x10000>;
-                               interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
-                                        <&clk IMX8MM_CLK_ECSPI3_ROOT>;
-                               clock-names = "ipg", "per";
-                               dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
-                       };
+                               ecspi2: spi@30830000 {
+                                       compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <0x30830000 0x10000>;
+                                       interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+                                                <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+                                       clock-names = "ipg", "per";
+                                       dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
 
-                       uart1: serial@30860000 {
-                               compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
-                               reg = <0x30860000 0x10000>;
-                               interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
-                                        <&clk IMX8MM_CLK_UART1_ROOT>;
-                               clock-names = "ipg", "per";
-                               dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
-                       };
+                               ecspi3: spi@30840000 {
+                                       compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <0x30840000 0x10000>;
+                                       interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+                                                <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+                                       clock-names = "ipg", "per";
+                                       dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
 
-                       uart3: serial@30880000 {
-                               compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
-                               reg = <0x30880000 0x10000>;
-                               interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
-                                        <&clk IMX8MM_CLK_UART3_ROOT>;
-                               clock-names = "ipg", "per";
-                               dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
-                               dma-names = "rx", "tx";
-                               status = "disabled";
-                       };
+                               uart1: serial@30860000 {
+                                       compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+                                       reg = <0x30860000 0x10000>;
+                                       interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+                                                <&clk IMX8MM_CLK_UART1_ROOT>;
+                                       clock-names = "ipg", "per";
+                                       dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
 
-                       uart2: serial@30890000 {
-                               compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
-                               reg = <0x30890000 0x10000>;
-                               interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
-                                        <&clk IMX8MM_CLK_UART2_ROOT>;
-                               clock-names = "ipg", "per";
-                               status = "disabled";
+                               uart3: serial@30880000 {
+                                       compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+                                       reg = <0x30880000 0x10000>;
+                                       interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+                                                <&clk IMX8MM_CLK_UART3_ROOT>;
+                                       clock-names = "ipg", "per";
+                                       dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
+                               };
+
+                               uart2: serial@30890000 {
+                                       compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+                                       reg = <0x30890000 0x10000>;
+                                       interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+                                                <&clk IMX8MM_CLK_UART2_ROOT>;
+                                       clock-names = "ipg", "per";
+                                       status = "disabled";
+                               };
                        };
 
                        crypto: crypto@30900000 {
                                        compatible = "fsl,sec-v4.0-job-ring";
                                        reg = <0x1000 0x1000>;
                                        interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+                                       status = "disabled";
                                };
 
                                sec_jr1: jr@2000 {
                                         <&clk IMX8MM_CLK_USDHC1_ROOT>;
                                clock-names = "ipg", "ahb", "per";
                                fsl,tuning-start-tap = <20>;
-                               fsl,tuning-step= <2>;
+                               fsl,tuning-step = <2>;
                                bus-width = <4>;
                                status = "disabled";
                        };
                                         <&clk IMX8MM_CLK_USDHC2_ROOT>;
                                clock-names = "ipg", "ahb", "per";
                                fsl,tuning-start-tap = <20>;
-                               fsl,tuning-step= <2>;
+                               fsl,tuning-step = <2>;
                                bus-width = <4>;
                                status = "disabled";
                        };
                                         <&clk IMX8MM_CLK_USDHC3_ROOT>;
                                clock-names = "ipg", "ahb", "per";
                                fsl,tuning-start-tap = <20>;
-                               fsl,tuning-step= <2>;
+                               fsl,tuning-step = <2>;
                                bus-width = <4>;
                                status = "disabled";
                        };
                                interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
                                         <&clk IMX8MM_CLK_QSPI_ROOT>;
-                               clock-names = "fspi", "fspi_en";
+                               clock-names = "fspi_en", "fspi";
                                status = "disabled";
                        };
 
                        };
 
                        fec1: ethernet@30be0000 {
-                               compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec";
+                               compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
                                reg = <0x30be0000 0x10000>;
                                interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
                                             <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
                                assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
                                                  <&clk IMX8MM_CLK_ENET_TIMER>,
                                                  <&clk IMX8MM_CLK_ENET_REF>,
-                                                 <&clk IMX8MM_CLK_ENET_TIMER>;
+                                                 <&clk IMX8MM_CLK_ENET_PHY_REF>;
                                assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
                                                         <&clk IMX8MM_SYS_PLL2_100M>,
-                                                        <&clk IMX8MM_SYS_PLL2_125M>;
-                               assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+                                                        <&clk IMX8MM_SYS_PLL2_125M>,
+                                                        <&clk IMX8MM_SYS_PLL2_50M>;
+                               assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
                                fsl,num-tx-queues = <3>;
                                fsl,num-rx-queues = <3>;
+                               nvmem-cells = <&fec_mac_address>;
+                               nvmem-cell-names = "mac-address";
+                               fsl,stop-mode = <&gpr 0x10 3>;
                                status = "disabled";
                        };
 
                        #size-cells = <1>;
                        ranges = <0x32c00000 0x32c00000 0x400000>;
 
+                       csi: csi@32e20000 {
+                               compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
+                               reg = <0x32e20000 0x1000>;
+                               interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
+                               clock-names = "mclk";
+                               power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
+                               status = "disabled";
+
+                               port {
+                                       csi_in: endpoint {
+                                               remote-endpoint = <&imx8mm_mipi_csi_out>;
+                                       };
+                               };
+                       };
+
+                       disp_blk_ctrl: blk-ctrl@32e28000 {
+                               compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
+                               reg = <0x32e28000 0x100>;
+                               power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+                                               <&pgc_dispmix>, <&pgc_mipi>,
+                                               <&pgc_mipi>;
+                               power-domain-names = "bus", "csi-bridge",
+                                                    "lcdif", "mipi-dsi",
+                                                    "mipi-csi";
+                               clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+                                        <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+                                        <&clk IMX8MM_CLK_CSI1_ROOT>,
+                                        <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+                                        <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+                                        <&clk IMX8MM_CLK_DISP_ROOT>,
+                                        <&clk IMX8MM_CLK_DSI_CORE>,
+                                        <&clk IMX8MM_CLK_DSI_PHY_REF>,
+                                        <&clk IMX8MM_CLK_CSI1_CORE>,
+                                        <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+                               clock-names = "csi-bridge-axi","csi-bridge-apb",
+                                             "csi-bridge-core", "lcdif-axi",
+                                             "lcdif-apb", "lcdif-pix",
+                                             "dsi-pclk", "dsi-ref",
+                                             "csi-aclk", "csi-pclk";
+                               #power-domain-cells = <1>;
+                       };
+
+                       mipi_csi: mipi-csi@32e30000 {
+                               compatible = "fsl,imx8mm-mipi-csi2";
+                               reg = <0x32e30000 0x1000>;
+                               interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+                               assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
+                                                 <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+                               assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
+                                                         <&clk IMX8MM_SYS_PLL2_1000M>;
+                               clock-frequency = <333000000>;
+                               clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+                                        <&clk IMX8MM_CLK_CSI1_ROOT>,
+                                        <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+                                        <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+                               clock-names = "pclk", "wrap", "phy", "axi";
+                               power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
+                               status = "disabled";
+
+                               ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       port@0 {
+                                               reg = <0>;
+                                       };
+
+                                       port@1 {
+                                               reg = <1>;
+
+                                               imx8mm_mipi_csi_out: endpoint {
+                                                       remote-endpoint = <&csi_in>;
+                                               };
+                                       };
+                               };
+                       };
+
                        usbotg1: usb@32e40000 {
                                compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
                                reg = <0x32e40000 0x200>;
                        status = "disabled";
                };
 
+               gpu_3d: gpu@38000000 {
+                       compatible = "vivante,gc";
+                       reg = <0x38000000 0x8000>;
+                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+                                <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+                                <&clk IMX8MM_CLK_GPU3D_ROOT>,
+                                <&clk IMX8MM_CLK_GPU3D_ROOT>;
+                       clock-names = "reg", "bus", "core", "shader";
+                       assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+                                         <&clk IMX8MM_GPU_PLL_OUT>;
+                       assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+                       assigned-clock-rates = <0>, <1000000000>;
+                       power-domains = <&pgc_gpu>;
+               };
+
+               gpu_2d: gpu@38008000 {
+                       compatible = "vivante,gc";
+                       reg = <0x38008000 0x8000>;
+                       interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+                                <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+                                <&clk IMX8MM_CLK_GPU2D_ROOT>;
+                       clock-names = "reg", "bus", "core";
+                       assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+                                         <&clk IMX8MM_GPU_PLL_OUT>;
+                       assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+                       assigned-clock-rates = <0>, <1000000000>;
+                       power-domains = <&pgc_gpu>;
+               };
+
+               vpu_g1: video-codec@38300000 {
+                       compatible = "nxp,imx8mm-vpu-g1";
+                       reg = <0x38300000 0x10000>;
+                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
+                       power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
+               };
+
+               vpu_g2: video-codec@38310000 {
+                       compatible = "nxp,imx8mq-vpu-g2";
+                       reg = <0x38310000 0x10000>;
+                       interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
+                       power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
+               };
+
+               vpu_blk_ctrl: blk-ctrl@38330000 {
+                       compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
+                       reg = <0x38330000 0x100>;
+                       power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+                                       <&pgc_vpu_g2>, <&pgc_vpu_h1>;
+                       power-domain-names = "bus", "g1", "g2", "h1";
+                       clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+                                <&clk IMX8MM_CLK_VPU_G2_ROOT>,
+                                <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+                       clock-names = "g1", "g2", "h1";
+                       assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+                                         <&clk IMX8MM_CLK_VPU_G2>;
+                       assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+                                                <&clk IMX8MM_VPU_PLL_OUT>;
+                       assigned-clock-rates = <600000000>,
+                                              <600000000>;
+                       #power-domain-cells = <1>;
+               };
+
                gic: interrupt-controller@38800000 {
                        compatible = "arm,gic-v3";
                        reg = <0x38800000 0x10000>, /* GIC Dist */
index fc9c2e16aadc263411b2dda51ff872e2907f7f86..648938f24c8ef9128bc7492fd92449e57035c32e 100644 (file)
 #define IMX8MM_POWER_DOMAIN_DISPMIX    10
 #define IMX8MM_POWER_DOMAIN_MIPI       11
 
+#define IMX8MM_VPUBLK_PD_G1            0
+#define IMX8MM_VPUBLK_PD_G2            1
+#define IMX8MM_VPUBLK_PD_H1            2
+
+#define IMX8MM_DISPBLK_PD_CSI_BRIDGE   0
+#define IMX8MM_DISPBLK_PD_LCDIF                1
+#define IMX8MM_DISPBLK_PD_MIPI_DSI     2
+#define IMX8MM_DISPBLK_PD_MIPI_CSI     3
+
 #endif