#define _MMIO_PORT(port, a, b) _MMIO(_PORT(port, a, b))
#define _MMIO_PIPE3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
#define _MMIO_PORT3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
+#define _PLL(pll, a, b) ((a) + (pll)*((b)-(a)))
+#define _MMIO_PLL(pll, a, b) _MMIO(_PLL(pll, a, b))
#define _PHY3(phy, ...) _PICK(phy, __VA_ARGS__)
#define _MMIO_PHY3(phy, a, b, c) _MMIO(_PHY3(phy, a, b, c))
#define DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port) ((port)*2)
#define DPCLKA_CFGCR0_DDI_CLK_SEL(pll, port) ((pll) << ((port)*2))
+/* CNL PLL */
+#define DPLL0_ENABLE 0x46010
+#define DPLL1_ENABLE 0x46014
+#define PLL_ENABLE (1 << 31)
+#define PLL_LOCK (1 << 30)
+#define PLL_POWER_ENABLE (1 << 27)
+#define PLL_POWER_STATE (1 << 26)
+#define CNL_DPLL_ENABLE(pll) _MMIO_PLL(pll, DPLL0_ENABLE, DPLL1_ENABLE)
+
+#define _CNL_DPLL0_CFGCR0 0x6C000
+#define _CNL_DPLL1_CFGCR0 0x6C080
+#define DPLL_CFGCR0_HDMI_MODE (1 << 30)
+#define DPLL_CFGCR0_SSC_ENABLE (1 << 29)
+#define DPLL_CFGCR0_LINK_RATE_MASK (0xf << 25)
+#define DPLL_CFGCR0_LINK_RATE_2700 (0 << 25)
+#define DPLL_CFGCR0_LINK_RATE_1350 (1 << 25)
+#define DPLL_CFGCR0_LINK_RATE_810 (2 << 25)
+#define DPLL_CFGCR0_LINK_RATE_1620 (3 << 25)
+#define DPLL_CFGCR0_LINK_RATE_1080 (4 << 25)
+#define DPLL_CFGCR0_LINK_RATE_2160 (5 << 25)
+#define DPLL_CFGCR0_LINK_RATE_3240 (6 << 25)
+#define DPLL_CFGCR0_LINK_RATE_4050 (7 << 25)
+#define DPLL_CFGCR0_DCO_FRACTION_MASK (0x7fff << 10)
+#define DPLL_CFGCR0_DCO_FRACTION(x) ((x) << 10)
+#define DPLL_CFGCR0_DCO_INTEGER_MASK (0x3ff)
+#define CNL_DPLL_CFGCR0(pll) _MMIO_PLL(pll, _CNL_DPLL0_CFGCR0, _CNL_DPLL1_CFGCR0)
+
+#define _CNL_DPLL0_CFGCR1 0x6C004
+#define _CNL_DPLL1_CFGCR1 0x6C084
+#define DPLL_CFGCR1_QDIV_RATIO_MASK (0xff << 10)
+#define DPLL_CFGCR1_QDIV_RATIO(x) ((x) << 10)
+#define DPLL_CFGCR1_QDIV_MODE(x) ((x) << 9)
+#define DPLL_CFGCR1_KDIV_MASK (7 << 6)
+#define DPLL_CFGCR1_KDIV(x) ((x) << 6)
+#define DPLL_CFGCR1_KDIV_1 (1 << 6)
+#define DPLL_CFGCR1_KDIV_2 (2 << 6)
+#define DPLL_CFGCR1_KDIV_4 (4 << 6)
+#define DPLL_CFGCR1_PDIV_MASK (0xf << 2)
+#define DPLL_CFGCR1_PDIV(x) ((x) << 2)
+#define DPLL_CFGCR1_PDIV_2 (1 << 2)
+#define DPLL_CFGCR1_PDIV_3 (2 << 2)
+#define DPLL_CFGCR1_PDIV_5 (4 << 2)
+#define DPLL_CFGCR1_PDIV_7 (8 << 2)
+#define DPLL_CFGCR1_CENTRAL_FREQ (3 << 0)
+#define CNL_DPLL_CFGCR1(pll) _MMIO_PLL(pll, _CNL_DPLL0_CFGCR1, _CNL_DPLL1_CFGCR1)
+
/* BXT display engine PLL */
#define BXT_DE_PLL_CTL _MMIO(0x6d000)
#define BXT_DE_PLL_RATIO(x) (x) /* {60,65,100} * 19.2MHz */
return true;
}
-
static bool
skl_ddi_dp_set_dpll_hw_state(int clock,
struct intel_dpll_hw_state *dpll_hw_state)
.dump_hw_state = bxt_dump_hw_state,
};
+static void cnl_ddi_pll_enable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ uint32_t val;
+
+ /* 1. Enable DPLL power in DPLL_ENABLE. */
+ val = I915_READ(CNL_DPLL_ENABLE(pll->id));
+ val |= PLL_POWER_ENABLE;
+ I915_WRITE(CNL_DPLL_ENABLE(pll->id), val);
+
+ /* 2. Wait for DPLL power state enabled in DPLL_ENABLE. */
+ if (intel_wait_for_register(dev_priv,
+ CNL_DPLL_ENABLE(pll->id),
+ PLL_POWER_STATE,
+ PLL_POWER_STATE,
+ 5))
+ DRM_ERROR("PLL %d Power not enabled\n", pll->id);
+
+ /*
+ * 3. Configure DPLL_CFGCR0 to set SSC enable/disable,
+ * select DP mode, and set DP link rate.
+ */
+ val = pll->state.hw_state.cfgcr0;
+ I915_WRITE(CNL_DPLL_CFGCR0(pll->id), val);
+
+ /* 4. Reab back to ensure writes completed */
+ POSTING_READ(CNL_DPLL_CFGCR0(pll->id));
+
+ /* 3. Configure DPLL_CFGCR0 */
+ /* Avoid touch CFGCR1 if HDMI mode is not enabled */
+ if (pll->state.hw_state.cfgcr0 & DPLL_CTRL1_HDMI_MODE(pll->id)) {
+ val = pll->state.hw_state.cfgcr1;
+ I915_WRITE(CNL_DPLL_CFGCR1(pll->id), val);
+ /* 4. Reab back to ensure writes completed */
+ POSTING_READ(CNL_DPLL_CFGCR1(pll->id));
+ }
+
+ /*
+ * 5. If the frequency will result in a change to the voltage
+ * requirement, follow the Display Voltage Frequency Switching
+ * Sequence Before Frequency Change
+ *
+ * FIXME: (DVFS) is used to adjust the display voltage to match the
+ * display clock frequencies
+ */
+
+ /* 6. Enable DPLL in DPLL_ENABLE. */
+ val = I915_READ(CNL_DPLL_ENABLE(pll->id));
+ val |= PLL_ENABLE;
+ I915_WRITE(CNL_DPLL_ENABLE(pll->id), val);
+
+ /* 7. Wait for PLL lock status in DPLL_ENABLE. */
+ if (intel_wait_for_register(dev_priv,
+ CNL_DPLL_ENABLE(pll->id),
+ PLL_LOCK,
+ PLL_LOCK,
+ 5))
+ DRM_ERROR("PLL %d not locked\n", pll->id);
+
+ /*
+ * 8. If the frequency will result in a change to the voltage
+ * requirement, follow the Display Voltage Frequency Switching
+ * Sequence After Frequency Change
+ *
+ * FIXME: (DVFS) is used to adjust the display voltage to match the
+ * display clock frequencies
+ */
+
+ /*
+ * 9. turn on the clock for the DDI and map the DPLL to the DDI
+ * Done at intel_ddi_clk_select
+ */
+}
+
+static void cnl_ddi_pll_disable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ uint32_t val;
+
+ /*
+ * 1. Configure DPCLKA_CFGCR0 to turn off the clock for the DDI.
+ * Done at intel_ddi_post_disable
+ */
+
+ /*
+ * 2. If the frequency will result in a change to the voltage
+ * requirement, follow the Display Voltage Frequency Switching
+ * Sequence Before Frequency Change
+ *
+ * FIXME: (DVFS) is used to adjust the display voltage to match the
+ * display clock frequencies
+ */
+
+ /* 3. Disable DPLL through DPLL_ENABLE. */
+ val = I915_READ(CNL_DPLL_ENABLE(pll->id));
+ val &= ~PLL_ENABLE;
+ I915_WRITE(CNL_DPLL_ENABLE(pll->id), val);
+
+ /* 4. Wait for PLL not locked status in DPLL_ENABLE. */
+ if (intel_wait_for_register(dev_priv,
+ CNL_DPLL_ENABLE(pll->id),
+ PLL_LOCK,
+ 0,
+ 5))
+ DRM_ERROR("PLL %d locked\n", pll->id);
+
+ /*
+ * 5. If the frequency will result in a change to the voltage
+ * requirement, follow the Display Voltage Frequency Switching
+ * Sequence After Frequency Change
+ *
+ * FIXME: (DVFS) is used to adjust the display voltage to match the
+ * display clock frequencies
+ */
+
+ /* 6. Disable DPLL power in DPLL_ENABLE. */
+ val = I915_READ(CNL_DPLL_ENABLE(pll->id));
+ val &= ~PLL_POWER_ENABLE;
+ I915_WRITE(CNL_DPLL_ENABLE(pll->id), val);
+
+ /* 7. Wait for DPLL power state disabled in DPLL_ENABLE. */
+ if (intel_wait_for_register(dev_priv,
+ CNL_DPLL_ENABLE(pll->id),
+ PLL_POWER_STATE,
+ 0,
+ 5))
+ DRM_ERROR("PLL %d Power not disabled\n", pll->id);
+}
+
+static bool cnl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll,
+ struct intel_dpll_hw_state *hw_state)
+{
+ uint32_t val;
+ bool ret;
+
+ if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS))
+ return false;
+
+ ret = false;
+
+ val = I915_READ(CNL_DPLL_ENABLE(pll->id));
+ if (!(val & PLL_ENABLE))
+ goto out;
+
+ val = I915_READ(CNL_DPLL_CFGCR0(pll->id));
+ hw_state->cfgcr0 = val;
+
+ /* avoid reading back stale values if HDMI mode is not enabled */
+ if (val & DPLL_CFGCR0_HDMI_MODE) {
+ hw_state->cfgcr1 = I915_READ(CNL_DPLL_CFGCR1(pll->id));
+ }
+ ret = true;
+
+out:
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
+
+ return ret;
+}
+
+static bool cnl_ddi_hdmi_pll_dividers(struct intel_crtc *crtc,
+ struct intel_crtc_state *crtc_state,
+ int clock)
+{
+ uint32_t cfgcr0, cfgcr1;
+ struct skl_wrpll_params wrpll_params = { 0, };
+
+ cfgcr0 = DPLL_CFGCR0_HDMI_MODE;
+
+ /* FIXME: Proper wrpll calculation done in a following patch */
+ return false;
+
+ cfgcr0 |= DPLL_CFGCR0_DCO_FRACTION(wrpll_params.dco_fraction) |
+ wrpll_params.dco_integer;
+
+ cfgcr1 = DPLL_CFGCR1_QDIV_RATIO(wrpll_params.qdiv_ratio) |
+ DPLL_CFGCR1_QDIV_MODE(wrpll_params.qdiv_mode) |
+ DPLL_CFGCR1_KDIV(wrpll_params.kdiv) |
+ DPLL_CFGCR1_PDIV(wrpll_params.pdiv) |
+ wrpll_params.central_freq |
+ DPLL_CFGCR1_CENTRAL_FREQ;
+
+ memset(&crtc_state->dpll_hw_state, 0,
+ sizeof(crtc_state->dpll_hw_state));
+
+ crtc_state->dpll_hw_state.cfgcr0 = cfgcr0;
+ crtc_state->dpll_hw_state.cfgcr1 = cfgcr1;
+ return true;
+}
+
+bool cnl_ddi_dp_set_dpll_hw_state(int clock,
+ struct intel_dpll_hw_state *dpll_hw_state)
+{
+ uint32_t cfgcr0;
+
+ cfgcr0 = DPLL_CFGCR0_SSC_ENABLE;
+
+ switch (clock / 2) {
+ case 81000:
+ cfgcr0 |= DPLL_CFGCR0_LINK_RATE_810;
+ break;
+ case 135000:
+ cfgcr0 |= DPLL_CFGCR0_LINK_RATE_1350;
+ break;
+ case 270000:
+ cfgcr0 |= DPLL_CFGCR0_LINK_RATE_2700;
+ break;
+ /* eDP 1.4 rates */
+ case 162000:
+ cfgcr0 |= DPLL_CFGCR0_LINK_RATE_1620;
+ break;
+ case 108000:
+ cfgcr0 |= DPLL_CFGCR0_LINK_RATE_1080;
+ break;
+ case 216000:
+ cfgcr0 |= DPLL_CFGCR0_LINK_RATE_2160;
+ break;
+ case 324000:
+ /* Some SKUs may require elevated I/O voltage to support this */
+ cfgcr0 |= DPLL_CFGCR0_LINK_RATE_3240;
+ break;
+ case 405000:
+ /* Some SKUs may require elevated I/O voltage to support this */
+ cfgcr0 |= DPLL_CFGCR0_LINK_RATE_4050;
+ break;
+ }
+
+ dpll_hw_state->cfgcr0 = cfgcr0;
+ return true;
+}
+
+static struct intel_shared_dpll *
+cnl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
+ struct intel_encoder *encoder)
+{
+ struct intel_shared_dpll *pll;
+ int clock = crtc_state->port_clock;
+ bool bret;
+ struct intel_dpll_hw_state dpll_hw_state;
+
+ memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
+
+ if (encoder->type == INTEL_OUTPUT_HDMI) {
+ bret = cnl_ddi_hdmi_pll_dividers(crtc, crtc_state, clock);
+ if (!bret) {
+ DRM_DEBUG_KMS("Could not get HDMI pll dividers.\n");
+ return NULL;
+ }
+ } else if (encoder->type == INTEL_OUTPUT_DP ||
+ encoder->type == INTEL_OUTPUT_DP_MST ||
+ encoder->type == INTEL_OUTPUT_EDP) {
+ bret = cnl_ddi_dp_set_dpll_hw_state(clock, &dpll_hw_state);
+ if (!bret) {
+ DRM_DEBUG_KMS("Could not set DP dpll HW state.\n");
+ return NULL;
+ }
+ crtc_state->dpll_hw_state = dpll_hw_state;
+ } else {
+ DRM_DEBUG_KMS("Skip DPLL setup for encoder %d\n",
+ encoder->type);
+ return NULL;
+ }
+
+ pll = intel_find_shared_dpll(crtc, crtc_state,
+ DPLL_ID_SKL_DPLL0,
+ DPLL_ID_SKL_DPLL2);
+ if (!pll) {
+ DRM_DEBUG_KMS("No PLL selected\n");
+ return NULL;
+ }
+
+ intel_reference_shared_dpll(pll, crtc_state);
+
+ return pll;
+}
+
+static const struct intel_shared_dpll_funcs cnl_ddi_pll_funcs = {
+ .enable = cnl_ddi_pll_enable,
+ .disable = cnl_ddi_pll_disable,
+ .get_hw_state = cnl_ddi_pll_get_hw_state,
+};
+
+static const struct dpll_info cnl_plls[] = {
+ { "DPLL 0", DPLL_ID_SKL_DPLL0, &cnl_ddi_pll_funcs, 0 },
+ { "DPLL 1", DPLL_ID_SKL_DPLL1, &cnl_ddi_pll_funcs, 0 },
+ { "DPLL 2", DPLL_ID_SKL_DPLL2, &cnl_ddi_pll_funcs, 0 },
+ { NULL, -1, NULL, },
+};
+
+static const struct intel_dpll_mgr cnl_pll_mgr = {
+ .dpll_info = cnl_plls,
+ .get_dpll = cnl_get_dpll,
+ .dump_hw_state = skl_dump_hw_state,
+};
+
/**
* intel_shared_dpll_init - Initialize shared DPLLs
* @dev: drm device
const struct dpll_info *dpll_info;
int i;
- if (IS_GEN9_BC(dev_priv))
+ if (IS_CANNONLAKE(dev_priv))
+ dpll_mgr = &cnl_pll_mgr;
+ else if (IS_GEN9_BC(dev_priv))
dpll_mgr = &skl_pll_mgr;
else if (IS_GEN9_LP(dev_priv))
dpll_mgr = &bxt_pll_mgr;
projects / kernel.git / commitdiff