i2c: imx-lpi2c: check only for enabled interrupt flags

[ Upstream commit 1c7885004567e8951d65a983be095f254dd20bef ]

When reading from I2C, the Tx watermark is set to 0. Unfortunately the
TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less
than watermark. So it is set in every case, hence the reset default of 1.
This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying
to send Tx data on a read message.
Mask the IRQ status to filter for wanted flags only.

Fixes: 90bbefd42929 ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index a0d045c1bc9e688de99cffc2b6eba45fae3eb649..13c17afe7102e700fe350e6de259bd681b0147fc 100644 (file)
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -508,10 +508,14 @@ disable:
 static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id)
 {
        struct lpi2c_imx_struct *lpi2c_imx = dev_id;
+       unsigned int enabled;
        unsigned int temp;
 
+       enabled = readl(lpi2c_imx->base + LPI2C_MIER);
+
        lpi2c_imx_intctrl(lpi2c_imx, 0);
        temp = readl(lpi2c_imx->base + LPI2C_MSR);
+       temp &= enabled;
 
        if (temp & MSR_RDF)
                lpi2c_imx_read_rxfifo(lpi2c_imx);