config CMD_EBTUPDATE
bool "Enable 'ebtupdate' command"
- depends on TEGRA30
+ depends on TEGRA20 || TEGRA30
select TEGRA_CRYPTO
help
Updating u-boot from within u-boot in rather complex or even
#
# (C) Copyright 2010,2011 Nvidia Corporation.
-ifdef CONFIG_SPL_BUILD
-obj-y += cpu.o
-endif
+obj-$(CONFIG_SPL_BUILD) += cpu.o
+obj-$(CONFIG_$(SPL_)CMD_EBTUPDATE) += bct.o
# The AVP is ARMv4T architecture so we must use special compiler
# flags for any startup files it might use.
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2022, Ramin <raminterex@yahoo.com>
+ * Copyright (c) 2022, Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <log.h>
+#include <asm/arch-tegra/crypto.h>
+#include "bct.h"
+#include "uboot_aes.h"
+
+/*
+ * @param bct boot config table start in RAM
+ * @param ect bootloader start in RAM
+ * @param ebt_size bootloader file size in bytes
+ * Return: 0, or 1 if failed
+ */
+static int bct_patch(u8 *bct, u8 *ebt, u32 ebt_size)
+{
+ struct nvboot_config_table *bct_tbl = NULL;
+ u8 ebt_hash[AES128_KEY_LENGTH] = { 0 };
+ u8 sbk[AES128_KEY_LENGTH] = { 0 };
+ u8 *bct_hash = bct;
+ int ret;
+
+ bct += BCT_HASH;
+
+ memcpy(sbk, (u8 *)(bct + BCT_LENGTH),
+ NVBOOT_CMAC_AES_HASH_LENGTH * 4);
+
+ ret = decrypt_data_block(bct, BCT_LENGTH, sbk);
+ if (ret)
+ return 1;
+
+ ebt_size = roundup(ebt_size, EBT_ALIGNMENT);
+
+ ret = encrypt_data_block(ebt, ebt_size, sbk);
+ if (ret)
+ return 1;
+
+ ret = sign_enc_data_block(ebt, ebt_size, ebt_hash, sbk);
+ if (ret)
+ return 1;
+
+ bct_tbl = (struct nvboot_config_table *)bct;
+
+ memcpy((u8 *)&bct_tbl->bootloader[0].crypto_hash,
+ ebt_hash, NVBOOT_CMAC_AES_HASH_LENGTH * 4);
+ bct_tbl->bootloader[0].entry_point = CONFIG_SPL_TEXT_BASE;
+ bct_tbl->bootloader[0].load_addr = CONFIG_SPL_TEXT_BASE;
+ bct_tbl->bootloader[0].length = ebt_size;
+
+ ret = encrypt_data_block(bct, BCT_LENGTH, sbk);
+ if (ret)
+ return 1;
+
+ ret = sign_enc_data_block(bct, BCT_LENGTH, bct_hash, sbk);
+ if (ret)
+ return 1;
+
+ return 0;
+}
+
+static int do_ebtupdate(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ u32 bct_addr = hextoul(argv[1], NULL);
+ u32 ebt_addr = hextoul(argv[2], NULL);
+ u32 ebt_size = hextoul(argv[3], NULL);
+
+ return bct_patch((u8 *)bct_addr, (u8 *)ebt_addr, ebt_size);
+}
+
+U_BOOT_CMD(ebtupdate, 4, 0, do_ebtupdate,
+ "update bootloader on re-crypted Tegra20 devices",
+ ""
+);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _BCT_H_
+#define _BCT_H_
+
+/*
+ * Defines the BCT parametres for T20
+ */
+#define BCT_LENGTH 0xFE0
+#define BCT_HASH 0x10
+#define EBT_ALIGNMENT 0x10
+
+/*
+ * Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words)
+ */
+#define NVBOOT_CMAC_AES_HASH_LENGTH 4
+
+/*
+ * Defines the maximum number of bootloader descriptions in the BCT.
+ */
+#define NVBOOT_MAX_BOOTLOADERS 4
+
+struct nv_bootloader_info {
+ u32 version;
+ u32 start_blk;
+ u32 start_page;
+ u32 length;
+ u32 load_addr;
+ u32 entry_point;
+ u32 attribute;
+ u32 crypto_hash[NVBOOT_CMAC_AES_HASH_LENGTH];
+};
+
+struct nvboot_config_table {
+ u32 unused0[4];
+ u32 boot_data_version;
+ u32 unused1[668];
+ struct nv_bootloader_info bootloader[NVBOOT_MAX_BOOTLOADERS];
+ u32 unused2[508];
+};
+
+#endif /* _BCT_H_ */
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+:
+
+ebtupdate command
+=============
+
+Synopsis
+--------
+
+::
+
+ ebtupdate [<bct> [<ebt>] [<size>]]
+
+Description
+-----------
+
+The "ebtupdate" command is used to self-update bootloader on Tegra 2 and Tegra 3
+production devices which were processed using re-cryption.
+
+The "ebtupdate" performs encryption of new bootloader and decryption, patching
+and re-encryption of BCT "in situ". After BCT and bootloader can be written in
+their respective places.
+
+bct
+ address of BCT block pre-loaded into RAM.
+
+ebt
+ address of the bootloader pre-loaded into RAM.
+
+size
+ size of the pre-loaded bootloader.
+
+Example
+-------
+
+This is the boot log of a LG Optimus Vu:
+
+::
+
+ => mmc dev 0 1
+ switch to partitions #1, OK
+ mmc0(part 1) is current device
+ => mmc read $kernel_addr_r 0 $boot_block_size
+ MMC read: dev # 0, block # 0, count 4096 ... 4096 blocks read: OK
+ => load mmc 0:1 $ramdisk_addr_r $bootloader_file
+ 684783 bytes read in 44 ms (14.8 MiB/s)
+ => size mmc 0:1 $bootloader_file
+ => ebtupdate $kernel_addr_r $ramdisk_addr_r $filesize
+ => mmc dev 0 1
+ switch to partitions #1, OK
+ mmc0(part 1) is current device
+ => mmc write $kernel_addr_r 0 $boot_block_size
+ MMC write: dev # 0, block # 0, count 4096 ... 4096 blocks written: OK
+ => mmc dev 0 2
+ switch to partitions #2, OK
+ mmc0(part 2) is current device
+ => mmc write $ramdisk_addr_r 0 $boot_block_size
+ MMC write: dev # 0, block # 0, count 4096 ... 4096 blocks written: OK
+
+Configuration
+-------------
+
+The ebtupdate command is only available if CONFIG_CMD_EBTUPDATE=y and
+only on Tegra 2 and Tegra 3 configurations.
+
+Return value
+------------
+
+The return value $? is set to 0 (true) if everything went successfully. If an
+error occurs, the return value $? is set to 1 (false).
projects / uboot.git / commitdiff