or define CFG_ENV_FLAGS_LIST_STATIC.
- Protected RAM:
- CONFIG_PRAM
+ CFG_PRAM
Define this variable to enable the reservation of
"protected RAM", i. e. RAM which is not overwritten
- by U-Boot. Define CONFIG_PRAM to hold the number of
+ by U-Boot. Define CFG_PRAM to hold the number of
kB you want to reserve for pRAM. You can overwrite
this default value by defining an environment
variable "pram" to the number of kB you want to
return arch_setup_dest_addr();
}
-#ifdef CONFIG_PRAM
+#ifdef CFG_PRAM
/* reserve protected RAM */
static int reserve_pram(void)
{
ulong reg;
- reg = env_get_ulong("pram", 10, CONFIG_PRAM);
+ reg = env_get_ulong("pram", 10, CFG_PRAM);
gd->relocaddr -= (reg << 10); /* size is in kB */
debug("Reserving %ldk for protected RAM at %08lx\n", reg,
gd->relocaddr);
return 0;
}
-#endif /* CONFIG_PRAM */
+#endif /* CFG_PRAM */
/* Round memory pointer down to next 4 kB limit */
static int reserve_round_4k(void)
#ifdef CONFIG_OF_BOARD_FIXUP
fix_fdt,
#endif
-#ifdef CONFIG_PRAM
+#ifdef CFG_PRAM
reserve_pram,
#endif
reserve_round_4k,
}
#endif
-#if defined(CONFIG_PRAM)
+#if defined(CFG_PRAM)
/*
* Export available size of memory for Linux, taking into account the
* protected RAM at top of memory
ulong pram = 0;
char memsz[32];
- pram = env_get_ulong("pram", 10, CONFIG_PRAM);
+ pram = env_get_ulong("pram", 10, CFG_PRAM);
sprintf(memsz, "%ldk", (long int)((gd->ram_size / 1024) - pram));
env_set("mem", memsz);
*/
last_stage_init,
#endif
-#if defined(CONFIG_PRAM)
+#if defined(CFG_PRAM)
initr_mem,
#endif
run_main_loop,
"save\0" \
""
-#define CONFIG_PRAM 512 /* 512 KB */
+#define CFG_PRAM 512 /* 512 KB */
#define CFG_SYS_CLK 166666666 /* CPU Core Clock */
#define CFG_SYS_PLL_ODR 0x36
"save\0" \
""
-#define CONFIG_PRAM 512 /* 512 KB */
+#define CFG_PRAM 512 /* 512 KB */
#define CFG_SYS_CLK 75000000
#define CFG_SYS_CPU_CLK CFG_SYS_CLK * 2
#define CFG_SYS_FLASH_BASE (CFG_SYS_CS0_BASE)
#if 0 /* test-only */
-#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
+#define CFG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
#endif
/*
"save\0" \
""
-#define CONFIG_PRAM 512 /* 512 KB */
+#define CFG_PRAM 512 /* 512 KB */
#define CFG_SYS_CLK 80000000
#define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3
"save\0" \
""
-#define CONFIG_PRAM 512 /* 512 KB */
+#define CFG_PRAM 512 /* 512 KB */
#define CFG_SYS_CLK 80000000
#define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3
"save\0" \
""
-#define CONFIG_PRAM 512 /* 512 KB */
+#define CFG_PRAM 512 /* 512 KB */
#define CFG_SYS_CLK 80000000
#define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3
#if defined(CONFIG_TI_SECURE_DEVICE)
/* Avoid relocating onto firewalled area at end of DRAM */
-#define CONFIG_PRAM (64 * 1024)
+#define CFG_PRAM (64 * 1024)
#endif /* CONFIG_TI_SECURE_DEVICE */
#endif /* __CONFIG_AM43XX_EVM_H */
#define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
#define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE
-#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + \
+#define CFG_PRAM ((CONFIG_KM_PNVRAM + \
CONFIG_KM_PHRAM + \
CONFIG_KM_RESERVED_PRAM) >> 10)
/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
* is not valid yet, which is the case for when u-boot copies itself to RAM
*/
-#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10)
+#define CFG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10)
/*
* IFC Definitions
#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
/* Reserve protected RAM for attached kernel */
-#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
+#define CFG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
#endif /* __CONFIG_H */
/* Input, PCI, Flexbus, and VCO */
-#define CONFIG_PRAM 2048 /* 2048 KB */
+#define CFG_PRAM 2048 /* 2048 KB */
#define CFG_SYS_MBAR 0xFC000000
* firewall violation, we tell u-boot that memory is protected RAM (PRAM)
*/
#if (CONFIG_TI_SECURE_EMIF_REGION_START == 0)
-#define CONFIG_PRAM (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE) >> 10
+#define CFG_PRAM (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE) >> 10
#endif
#else
/*