]> git.baikalelectronics.ru Git - kernel.git/commitdiff
cxgb4: Add PTP Hardware Clock (PHC) support
authorAtul Gupta <atul.gupta@chelsio.com>
Tue, 4 Jul 2017 11:16:21 +0000 (16:46 +0530)
committerDavid S. Miller <davem@davemloft.net>
Wed, 5 Jul 2017 08:21:54 +0000 (09:21 +0100)
Add PTP IEEE-1588 support and make it accessible via PHC subsystem.
The functionality is enabled for T5/T6 adapters. Driver interfaces with
Firmware to program and adjust the clock offset.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c

index 584aa606d1f7b25203c42615be00a6ea37edeb6a..86f92e31e8aa6bc042e97aa131da01bb17765a44 100644 (file)
@@ -5202,6 +5202,9 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                mutex_unlock(&uld_mutex);
        }
 
+       if (!is_t4(adapter->params.chip))
+               cxgb4_ptp_init(adapter);
+
        print_adapter_info(adapter);
        setup_fw_sge_queues(adapter);
        return 0;
@@ -5311,6 +5314,9 @@ static void remove_one(struct pci_dev *pdev)
 
                debugfs_remove_recursive(adapter->debugfs_root);
 
+               if (!is_t4(adapter->params.chip))
+                       cxgb4_ptp_stop(adapter);
+
                /* If we allocated filters, free up state associated with any
                 * valid filters ...
                 */
index 0efcbad2d2d68a500b431d5b3cea483341a0ca40..50517cfd9671574c630b676ecec2892eb304b4d9 100644 (file)
@@ -192,3 +192,284 @@ int cxgb4_ptp_redirect_rx_packet(struct adapter *adapter, struct port_info *pi)
                        "PTP: %s error %d\n", __func__, -err);
        return err;
 }
+
+/**
+ * @ptp: ptp clock structure
+ * @ppb: Desired frequency change in parts per billion
+ *
+ * Adjust the frequency of the PHC cycle counter by the indicated ppb from
+ * the base frequency.
+ */
+static int cxgb4_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
+{
+       struct adapter *adapter = (struct adapter *)container_of(ptp,
+                                  struct adapter, ptp_clock_info);
+       struct fw_ptp_cmd c;
+       int err;
+
+       memset(&c, 0, sizeof(c));
+       c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
+                                    FW_CMD_REQUEST_F |
+                                    FW_CMD_WRITE_F |
+                                    FW_PTP_CMD_PORTID_V(0));
+       c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
+       c.u.ts.sc = FW_PTP_SC_ADJ_FREQ;
+       c.u.ts.sign = (ppb < 0) ? 1 : 0;
+       if (ppb < 0)
+               ppb = -ppb;
+       c.u.ts.ppb = cpu_to_be32(ppb);
+
+       err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
+       if (err < 0)
+               dev_err(adapter->pdev_dev,
+                       "PTP: %s error %d\n", __func__, -err);
+
+       return err;
+}
+
+/**
+ * cxgb4_ptp_fineadjtime - Shift the time of the hardware clock
+ * @ptp: ptp clock structure
+ * @delta: Desired change in nanoseconds
+ *
+ * Adjust the timer by resetting the timecounter structure.
+ */
+static int  cxgb4_ptp_fineadjtime(struct adapter *adapter, s64 delta)
+{
+       struct fw_ptp_cmd c;
+       int err;
+
+       memset(&c, 0, sizeof(c));
+       c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
+                            FW_CMD_REQUEST_F |
+                            FW_CMD_WRITE_F |
+                            FW_PTP_CMD_PORTID_V(0));
+       c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
+       c.u.ts.sc = FW_PTP_SC_ADJ_FTIME;
+       c.u.ts.tm = cpu_to_be64(delta);
+
+       err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
+       if (err < 0)
+               dev_err(adapter->pdev_dev,
+                       "PTP: %s error %d\n", __func__, -err);
+       return err;
+}
+
+/**
+ * cxgb4_ptp_adjtime - Shift the time of the hardware clock
+ * @ptp: ptp clock structure
+ * @delta: Desired change in nanoseconds
+ *
+ * Adjust the timer by resetting the timecounter structure.
+ */
+static int cxgb4_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+       struct adapter *adapter =
+               (struct adapter *)container_of(ptp, struct adapter,
+                                              ptp_clock_info);
+       struct fw_ptp_cmd c;
+       s64 sign = 1;
+       int err;
+
+       if (delta < 0)
+               sign = -1;
+
+       if (delta * sign > PTP_CLOCK_MAX_ADJTIME) {
+               memset(&c, 0, sizeof(c));
+               c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
+                                            FW_CMD_REQUEST_F |
+                                            FW_CMD_WRITE_F |
+                                            FW_PTP_CMD_PORTID_V(0));
+               c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
+               c.u.ts.sc = FW_PTP_SC_ADJ_TIME;
+               c.u.ts.sign = (delta < 0) ? 1 : 0;
+               if (delta < 0)
+                       delta = -delta;
+               c.u.ts.tm = cpu_to_be64(delta);
+
+               err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
+               if (err < 0)
+                       dev_err(adapter->pdev_dev,
+                               "PTP: %s error %d\n", __func__, -err);
+       } else {
+               err = cxgb4_ptp_fineadjtime(adapter, delta);
+       }
+
+       return err;
+}
+
+/**
+ * cxgb4_ptp_gettime - Reads the current time from the hardware clock
+ * @ptp: ptp clock structure
+ * @ts: timespec structure to hold the current time value
+ *
+ * Read the timecounter and return the correct value in ns after converting
+ * it into a struct timespec.
+ */
+static int cxgb4_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
+{
+       struct adapter *adapter = (struct adapter *)container_of(ptp,
+                                  struct adapter, ptp_clock_info);
+       struct fw_ptp_cmd c;
+       u64 ns;
+       int err;
+
+       memset(&c, 0, sizeof(c));
+       c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
+                                    FW_CMD_REQUEST_F |
+                                    FW_CMD_READ_F |
+                                    FW_PTP_CMD_PORTID_V(0));
+       c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
+       c.u.ts.sc = FW_PTP_SC_GET_TIME;
+
+       err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), &c);
+       if (err < 0) {
+               dev_err(adapter->pdev_dev,
+                       "PTP: %s error %d\n", __func__, -err);
+               return err;
+       }
+
+       /* convert to timespec*/
+       ns = be64_to_cpu(c.u.ts.tm);
+       *ts = ns_to_timespec64(ns);
+
+       return err;
+}
+
+/**
+ *  cxgb4_ptp_settime - Set the current time on the hardware clock
+ *  @ptp: ptp clock structure
+ *  @ts: timespec containing the new time for the cycle counter
+ *
+ *  Reset value to new base value instead of the kernel
+ *  wall timer value.
+ */
+static int cxgb4_ptp_settime(struct ptp_clock_info *ptp,
+                            const struct timespec64 *ts)
+{
+       struct adapter *adapter = (struct adapter *)container_of(ptp,
+                                  struct adapter, ptp_clock_info);
+       struct fw_ptp_cmd c;
+       u64 ns;
+       int err;
+
+       memset(&c, 0, sizeof(c));
+       c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
+                                    FW_CMD_REQUEST_F |
+                                    FW_CMD_WRITE_F |
+                                    FW_PTP_CMD_PORTID_V(0));
+       c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
+       c.u.ts.sc = FW_PTP_SC_SET_TIME;
+
+       ns = timespec64_to_ns(ts);
+       c.u.ts.tm = cpu_to_be64(ns);
+
+       err =  t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
+       if (err < 0)
+               dev_err(adapter->pdev_dev,
+                       "PTP: %s error %d\n", __func__, -err);
+
+       return err;
+}
+
+static void cxgb4_init_ptp_timer(struct adapter *adapter)
+{
+       struct fw_ptp_cmd c;
+       int err;
+
+       memset(&c, 0, sizeof(c));
+               c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
+                                            FW_CMD_REQUEST_F |
+                                            FW_CMD_WRITE_F |
+                                            FW_PTP_CMD_PORTID_V(0));
+       c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
+       c.u.scmd.sc = FW_PTP_SC_INIT_TIMER;
+
+       err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
+       if (err < 0)
+               dev_err(adapter->pdev_dev,
+                       "PTP: %s error %d\n", __func__, -err);
+}
+
+/**
+ * cxgb4_ptp_enable - enable or disable an ancillary feature
+ * @ptp: ptp clock structure
+ * @request: Desired resource to enable or disable
+ * @on: Caller passes one to enable or zero to disable
+ *
+ * Enable (or disable) ancillary features of the PHC subsystem.
+ * Currently, no ancillary features are supported.
+ */
+static int cxgb4_ptp_enable(struct ptp_clock_info __always_unused *ptp,
+                           struct ptp_clock_request __always_unused *request,
+                           int __always_unused on)
+{
+       return -ENOTSUPP;
+}
+
+static const struct ptp_clock_info cxgb4_ptp_clock_info = {
+       .owner          = THIS_MODULE,
+       .name           = "cxgb4_clock",
+       .max_adj        = MAX_PTP_FREQ_ADJ,
+       .n_alarm        = 0,
+       .n_ext_ts       = 0,
+       .n_per_out      = 0,
+       .pps            = 0,
+       .adjfreq        = cxgb4_ptp_adjfreq,
+       .adjtime        = cxgb4_ptp_adjtime,
+       .gettime64      = cxgb4_ptp_gettime,
+       .settime64      = cxgb4_ptp_settime,
+       .enable         = cxgb4_ptp_enable,
+};
+
+/**
+ * cxgb4_ptp_init - initialize PTP for devices which support it
+ * @adapter: board private structure
+ *
+ * This function performs the required steps for enabling PTP support.
+ */
+void cxgb4_ptp_init(struct adapter *adapter)
+{
+       struct timespec64 now;
+        /* no need to create a clock device if we already have one */
+       if (!IS_ERR_OR_NULL(adapter->ptp_clock))
+               return;
+
+       adapter->ptp_tx_skb = NULL;
+       adapter->ptp_clock_info = cxgb4_ptp_clock_info;
+       spin_lock_init(&adapter->ptp_lock);
+
+       adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info,
+                                               &adapter->pdev->dev);
+       if (!adapter->ptp_clock) {
+               dev_err(adapter->pdev_dev,
+                       "PTP %s Clock registration has failed\n", __func__);
+               return;
+       }
+
+       now = ktime_to_timespec64(ktime_get_real());
+       cxgb4_init_ptp_timer(adapter);
+       if (cxgb4_ptp_settime(&adapter->ptp_clock_info, &now) < 0) {
+               ptp_clock_unregister(adapter->ptp_clock);
+               adapter->ptp_clock = NULL;
+       }
+}
+
+/**
+ * cxgb4_ptp_remove - disable PTP device and stop the overflow check
+ * @adapter: board private structure
+ *
+ * Stop the PTP support.
+ */
+void cxgb4_ptp_stop(struct adapter *adapter)
+{
+       if (adapter->ptp_tx_skb) {
+               dev_kfree_skb_any(adapter->ptp_tx_skb);
+               adapter->ptp_tx_skb = NULL;
+       }
+
+       if (adapter->ptp_clock) {
+               ptp_clock_unregister(adapter->ptp_clock);
+               adapter->ptp_clock = NULL;
+       }
+}