+++ /dev/null
-/*
- * net-3-driver for the NI5210 card (i82586 Ethernet chip)
- *
- * This is an extension to the Linux operating system, and is covered by the
- * same GNU General Public License that covers that work.
- *
- * Alphacode 0.82 (96/09/29) for Linux 2.0.0 (or later)
- * Copyrights (c) 1994,1995,1996 by M.Hipp (hippm@informatik.uni-tuebingen.de)
- * [feel free to mail ....]
- *
- * when using as module: (no autoprobing!)
- * run with e.g:
- * insmod ni52.o io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
- *
- * CAN YOU PLEASE REPORT ME YOUR PERFORMANCE EXPERIENCES !!.
- *
- * If you find a bug, please report me:
- * The kernel panic output and any kmsg from the ni52 driver
- * the ni5210-driver-version and the linux-kernel version
- * how many shared memory (memsize) on the netcard,
- * bootprom: yes/no, base_addr, mem_start
- * maybe the ni5210-card revision and the i82586 version
- *
- * autoprobe for: base_addr: 0x300,0x280,0x360,0x320,0x340
- * mem_start: 0xd0000,0xd2000,0xc8000,0xca000,0xd4000,0xd6000,
- * 0xd8000,0xcc000,0xce000,0xda000,0xdc000
- *
- * sources:
- * skeleton.c from Donald Becker
- *
- * I have also done a look in the following sources: (mail me if you need them)
- * crynwr-packet-driver by Russ Nelson
- * Garret A. Wollman's (fourth) i82586-driver for BSD
- * (before getting an i82596 (yes 596 not 586) manual, the existing drivers
- * helped me a lot to understand this tricky chip.)
- *
- * Known Problems:
- * The internal sysbus seems to be slow. So we often lose packets because of
- * overruns while receiving from a fast remote host.
- * This can slow down TCP connections. Maybe the newer ni5210 cards are
- * better. My experience is, that if a machine sends with more than about
- * 500-600K/s the fifo/sysbus overflows.
- *
- * IMPORTANT NOTE:
- * On fast networks, it's a (very) good idea to have 16K shared memory. With
- * 8K, we can store only 4 receive frames, so it can (easily) happen that a
- * remote machine 'overruns' our system.
- *
- * Known i82586/card problems (I'm sure, there are many more!):
- * Running the NOP-mode, the i82586 sometimes seems to forget to report
- * every xmit-interrupt until we restart the CU.
- * Another MAJOR bug is, that the RU sometimes seems to ignore the EL-Bit
- * in the RBD-Struct which indicates an end of the RBD queue.
- * Instead, the RU fetches another (randomly selected and
- * usually used) RBD and begins to fill it. (Maybe, this happens only if
- * the last buffer from the previous RFD fits exact into the queue and
- * the next RFD can't fetch an initial RBD. Anyone knows more? )
- *
- * results from ftp performance tests with Linux 1.2.5
- * send and receive about 350-400 KByte/s (peak up to 460 kbytes/s)
- * sending in NOP-mode: peak performance up to 530K/s (but better don't
- * run this mode)
- */
-
-/*
- * 29.Sept.96: virt_to_bus changes for new memory scheme
- * 19.Feb.96: more Mcast changes, module support (MH)
- *
- * 18.Nov.95: Mcast changes (AC).
- *
- * 23.April.95: fixed(?) receiving problems by configuring a RFD more
- * than the number of RBD's. Can maybe cause other problems.
- * 18.April.95: Added MODULE support (MH)
- * 17.April.95: MC related changes in init586() and set_multicast_list().
- * removed use of 'jiffies' in init586() (MH)
- *
- * 19.Sep.94: Added Multicast support (not tested yet) (MH)
- *
- * 18.Sep.94: Workaround for 'EL-Bug'. Removed flexible RBD-handling.
- * Now, every RFD has exact one RBD. (MH)
- *
- * 14.Sep.94: added promiscuous mode, a few cleanups (MH)
- *
- * 19.Aug.94: changed request_irq() parameter (MH)
- *
- * 20.July.94: removed cleanup bugs, removed a 16K-mem-probe-bug (MH)
- *
- * 19.July.94: lotsa cleanups .. (MH)
- *
- * 17.July.94: some patches ... verified to run with 1.1.29 (MH)
- *
- * 4.July.94: patches for Linux 1.1.24 (MH)
- *
- * 26.March.94: patches for Linux 1.0 and iomem-auto-probe (MH)
- *
- * 30.Sep.93: Added nop-chain .. driver now runs with only one Xmit-Buff,
- * too (MH)
- *
- * < 30.Sep.93: first versions
- */
-
-static int debuglevel; /* debug-printk 0: off 1: a few 2: more */
-static int automatic_resume; /* experimental .. better should be zero */
-static int rfdadd; /* rfdadd=1 may be better for 8K MEM cards */
-static int fifo = 0x8; /* don't change */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <asm/io.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include "ni52.h"
-
-#define DRV_NAME "ni52"
-
-#define DEBUG /* debug on */
-#define SYSBUSVAL 1 /* 8 Bit */
-
-#define ni_attn586() { outb(0, dev->base_addr + NI52_ATTENTION); }
-#define ni_reset586() { outb(0, dev->base_addr + NI52_RESET); }
-#define ni_disint() { outb(0, dev->base_addr + NI52_INTDIS); }
-#define ni_enaint() { outb(0, dev->base_addr + NI52_INTENA); }
-
-#define make32(ptr16) ((void __iomem *)(p->memtop + (short) (ptr16)))
-#define make24(ptr32) ((char __iomem *)(ptr32)) - p->base
-#define make16(ptr32) ((unsigned short) ((char __iomem *)(ptr32)\
- - p->memtop))
-
-/******************* how to calculate the buffers *****************************
-
- * IMPORTANT NOTE: if you configure only one NUM_XMIT_BUFFS, the driver works
- * --------------- in a different (more stable?) mode. Only in this mode it's
- * possible to configure the driver with 'NO_NOPCOMMANDS'
-
-sizeof(scp)=12; sizeof(scb)=16; sizeof(iscp)=8;
-sizeof(scp)+sizeof(iscp)+sizeof(scb) = 36 = INIT
-sizeof(rfd) = 24; sizeof(rbd) = 12;
-sizeof(tbd) = 8; sizeof(transmit_cmd) = 16;
-sizeof(nop_cmd) = 8;
-
- * if you don't know the driver, better do not change these values: */
-
-#define RECV_BUFF_SIZE 1524 /* slightly oversized */
-#define XMIT_BUFF_SIZE 1524 /* slightly oversized */
-#define NUM_XMIT_BUFFS 1 /* config for both, 8K and 16K shmem */
-#define NUM_RECV_BUFFS_8 4 /* config for 8K shared mem */
-#define NUM_RECV_BUFFS_16 9 /* config for 16K shared mem */
-#define NO_NOPCOMMANDS /* only possible with NUM_XMIT_BUFFS=1 */
-
-/**************************************************************************/
-
-
-#define NI52_TOTAL_SIZE 16
-#define NI52_ADDR0 0x02
-#define NI52_ADDR1 0x07
-#define NI52_ADDR2 0x01
-
-static int ni52_probe1(struct net_device *dev, int ioaddr);
-static irqreturn_t ni52_interrupt(int irq, void *dev_id);
-static int ni52_open(struct net_device *dev);
-static int ni52_close(struct net_device *dev);
-static netdev_tx_t ni52_send_packet(struct sk_buff *, struct net_device *);
-static struct net_device_stats *ni52_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static void ni52_timeout(struct net_device *dev);
-
-/* helper-functions */
-static int init586(struct net_device *dev);
-static int check586(struct net_device *dev, unsigned size);
-static void alloc586(struct net_device *dev);
-static void startrecv586(struct net_device *dev);
-static void __iomem *alloc_rfa(struct net_device *dev, void __iomem *ptr);
-static void ni52_rcv_int(struct net_device *dev);
-static void ni52_xmt_int(struct net_device *dev);
-static void ni52_rnr_int(struct net_device *dev);
-
-struct priv {
- char __iomem *base;
- char __iomem *mapped;
- char __iomem *memtop;
- spinlock_t spinlock;
- int reset;
- struct rfd_struct __iomem *rfd_last, *rfd_top, *rfd_first;
- struct scp_struct __iomem *scp;
- struct iscp_struct __iomem *iscp;
- struct scb_struct __iomem *scb;
- struct tbd_struct __iomem *xmit_buffs[NUM_XMIT_BUFFS];
-#if (NUM_XMIT_BUFFS == 1)
- struct transmit_cmd_struct __iomem *xmit_cmds[2];
- struct nop_cmd_struct __iomem *nop_cmds[2];
-#else
- struct transmit_cmd_struct __iomem *xmit_cmds[NUM_XMIT_BUFFS];
- struct nop_cmd_struct __iomem *nop_cmds[NUM_XMIT_BUFFS];
-#endif
- int nop_point, num_recv_buffs;
- char __iomem *xmit_cbuffs[NUM_XMIT_BUFFS];
- int xmit_count, xmit_last;
-};
-
-/* wait for command with timeout: */
-static void wait_for_scb_cmd(struct net_device *dev)
-{
- struct priv *p = netdev_priv(dev);
- int i;
- for (i = 0; i < 16384; i++) {
- if (readb(&p->scb->cmd_cuc) == 0)
- break;
- udelay(4);
- if (i == 16383) {
- printk(KERN_ERR "%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n",
- dev->name, readb(&p->scb->cmd_cuc), readb(&p->scb->cus));
- if (!p->reset) {
- p->reset = 1;
- ni_reset586();
- }
- }
- }
-}
-
-static void wait_for_scb_cmd_ruc(struct net_device *dev)
-{
- struct priv *p = netdev_priv(dev);
- int i;
- for (i = 0; i < 16384; i++) {
- if (readb(&p->scb->cmd_ruc) == 0)
- break;
- udelay(4);
- if (i == 16383) {
- printk(KERN_ERR "%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n",
- dev->name, readb(&p->scb->cmd_ruc),
- readb(&p->scb->rus));
- if (!p->reset) {
- p->reset = 1;
- ni_reset586();
- }
- }
- }
-}
-
-static void wait_for_stat_compl(void __iomem *p)
-{
- struct nop_cmd_struct __iomem *addr = p;
- int i;
- for (i = 0; i < 32767; i++) {
- if (readw(&((addr)->cmd_status)) & STAT_COMPL)
- break;
- udelay(32);
- }
-}
-
-/**********************************************
- * close device
- */
-static int ni52_close(struct net_device *dev)
-{
- free_irq(dev->irq, dev);
- ni_reset586(); /* the hard way to stop the receiver */
- netif_stop_queue(dev);
- return 0;
-}
-
-/**********************************************
- * open device
- */
-static int ni52_open(struct net_device *dev)
-{
- int ret;
-
- ni_disint();
- alloc586(dev);
- init586(dev);
- startrecv586(dev);
- ni_enaint();
-
- ret = request_irq(dev->irq, ni52_interrupt, 0, dev->name, dev);
- if (ret) {
- ni_reset586();
- return ret;
- }
- netif_start_queue(dev);
- return 0; /* most done by init */
-}
-
-static int check_iscp(struct net_device *dev, void __iomem *addr)
-{
- struct iscp_struct __iomem *iscp = addr;
- struct priv *p = netdev_priv(dev);
- memset_io(iscp, 0, sizeof(struct iscp_struct));
-
- writel(make24(iscp), &p->scp->iscp);
- writeb(1, &iscp->busy);
-
- ni_reset586();
- ni_attn586();
- mdelay(32); /* wait a while... */
- /* i82586 clears 'busy' after successful init */
- if (readb(&iscp->busy))
- return 0;
- return 1;
-}
-
-/**********************************************
- * Check to see if there's an 82586 out there.
- */
-static int check586(struct net_device *dev, unsigned size)
-{
- struct priv *p = netdev_priv(dev);
- int i;
-
- p->mapped = ioremap(dev->mem_start, size);
- if (!p->mapped)
- return 0;
-
- p->base = p->mapped + size - 0x01000000;
- p->memtop = p->mapped + size;
- p->scp = (struct scp_struct __iomem *)(p->base + SCP_DEFAULT_ADDRESS);
- p->scb = (struct scb_struct __iomem *) p->mapped;
- p->iscp = (struct iscp_struct __iomem *)p->scp - 1;
- memset_io(p->scp, 0, sizeof(struct scp_struct));
- for (i = 0; i < sizeof(struct scp_struct); i++)
- /* memory was writeable? */
- if (readb((char __iomem *)p->scp + i))
- goto Enodev;
- writeb(SYSBUSVAL, &p->scp->sysbus); /* 1 = 8Bit-Bus, 0 = 16 Bit */
- if (readb(&p->scp->sysbus) != SYSBUSVAL)
- goto Enodev;
-
- if (!check_iscp(dev, p->mapped))
- goto Enodev;
- if (!check_iscp(dev, p->iscp))
- goto Enodev;
- return 1;
-Enodev:
- iounmap(p->mapped);
- return 0;
-}
-
-/******************************************************************
- * set iscp at the right place, called by ni52_probe1 and open586.
- */
-static void alloc586(struct net_device *dev)
-{
- struct priv *p = netdev_priv(dev);
-
- ni_reset586();
- mdelay(32);
-
- memset_io(p->iscp, 0, sizeof(struct iscp_struct));
- memset_io(p->scp , 0, sizeof(struct scp_struct));
-
- writel(make24(p->iscp), &p->scp->iscp);
- writeb(SYSBUSVAL, &p->scp->sysbus);
- writew(make16(p->scb), &p->iscp->scb_offset);
-
- writeb(1, &p->iscp->busy);
- ni_reset586();
- ni_attn586();
-
- mdelay(32);
-
- if (readb(&p->iscp->busy))
- printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name);
-
- p->reset = 0;
-
- memset_io(p->scb, 0, sizeof(struct scb_struct));
-}
-
-/* set: io,irq,memstart,memend or set it when calling insmod */
-static int irq = 9;
-static int io = 0x300;
-static long memstart; /* e.g 0xd0000 */
-static long memend; /* e.g 0xd4000 */
-
-/**********************************************
- * probe the ni5210-card
- */
-struct net_device * __init ni52_probe(int unit)
-{
- struct net_device *dev = alloc_etherdev(sizeof(struct priv));
- static const int ports[] = {0x300, 0x280, 0x360, 0x320, 0x340, 0};
- const int *port;
- struct priv *p;
- int err = 0;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- p = netdev_priv(dev);
-
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- io = dev->base_addr;
- irq = dev->irq;
- memstart = dev->mem_start;
- memend = dev->mem_end;
- }
-
- if (io > 0x1ff) { /* Check a single specified location. */
- err = ni52_probe1(dev, io);
- } else if (io > 0) { /* Don't probe at all. */
- err = -ENXIO;
- } else {
- for (port = ports; *port && ni52_probe1(dev, *port) ; port++)
- ;
- if (*port)
- goto got_it;
-#ifdef FULL_IO_PROBE
- for (io = 0x200; io < 0x400 && ni52_probe1(dev, io); io += 8)
- ;
- if (io < 0x400)
- goto got_it;
-#endif
- err = -ENODEV;
- }
- if (err)
- goto out;
-got_it:
- err = register_netdev(dev);
- if (err)
- goto out1;
- return dev;
-out1:
- iounmap(p->mapped);
- release_region(dev->base_addr, NI52_TOTAL_SIZE);
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
-static const struct net_device_ops ni52_netdev_ops = {
- .ndo_open = ni52_open,
- .ndo_stop = ni52_close,
- .ndo_get_stats = ni52_get_stats,
- .ndo_tx_timeout = ni52_timeout,
- .ndo_start_xmit = ni52_send_packet,
- .ndo_set_rx_mode = set_multicast_list,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-static int __init ni52_probe1(struct net_device *dev, int ioaddr)
-{
- int i, size, retval;
- struct priv *priv = netdev_priv(dev);
-
- dev->base_addr = ioaddr;
- dev->irq = irq;
- dev->mem_start = memstart;
- dev->mem_end = memend;
-
- spin_lock_init(&priv->spinlock);
-
- if (!request_region(ioaddr, NI52_TOTAL_SIZE, DRV_NAME))
- return -EBUSY;
-
- if (!(inb(ioaddr+NI52_MAGIC1) == NI52_MAGICVAL1) ||
- !(inb(ioaddr+NI52_MAGIC2) == NI52_MAGICVAL2)) {
- retval = -ENODEV;
- goto out;
- }
-
- for (i = 0; i < ETH_ALEN; i++)
- dev->dev_addr[i] = inb(dev->base_addr+i);
-
- if (dev->dev_addr[0] != NI52_ADDR0 || dev->dev_addr[1] != NI52_ADDR1 ||
- dev->dev_addr[2] != NI52_ADDR2) {
- retval = -ENODEV;
- goto out;
- }
-
- printk(KERN_INFO "%s: NI5210 found at %#3lx, ",
- dev->name, dev->base_addr);
-
- /*
- * check (or search) IO-Memory, 8K and 16K
- */
-#ifdef MODULE
- size = dev->mem_end - dev->mem_start;
- if (size != 0x2000 && size != 0x4000) {
- printk("\n");
- printk(KERN_ERR "%s: Invalid memory size %d. Allowed is 0x2000 or 0x4000 bytes.\n", dev->name, size);
- retval = -ENODEV;
- goto out;
- }
- if (!check586(dev, size)) {
- printk(KERN_ERR "?memcheck, Can't find memory at 0x%lx with size %d!\n", dev->mem_start, size);
- retval = -ENODEV;
- goto out;
- }
-#else
- if (dev->mem_start != 0) {
- /* no auto-mem-probe */
- size = 0x4000; /* check for 16K mem */
- if (!check586(dev, size)) {
- size = 0x2000; /* check for 8K mem */
- if (!check586(dev, size)) {
- printk(KERN_ERR "?memprobe, Can't find memory at 0x%lx!\n", dev->mem_start);
- retval = -ENODEV;
- goto out;
- }
- }
- } else {
- static const unsigned long memaddrs[] = {
- 0xc8000, 0xca000, 0xcc000, 0xce000, 0xd0000, 0xd2000,
- 0xd4000, 0xd6000, 0xd8000, 0xda000, 0xdc000, 0
- };
- for (i = 0;; i++) {
- if (!memaddrs[i]) {
- printk(KERN_ERR "?memprobe, Can't find io-memory!\n");
- retval = -ENODEV;
- goto out;
- }
- dev->mem_start = memaddrs[i];
- size = 0x2000; /* check for 8K mem */
- if (check586(dev, size))
- /* 8K-check */
- break;
- size = 0x4000; /* check for 16K mem */
- if (check586(dev, size))
- /* 16K-check */
- break;
- }
- }
- /* set mem_end showed by 'ifconfig' */
- dev->mem_end = dev->mem_start + size;
-#endif
-
- alloc586(dev);
-
- /* set number of receive-buffs according to memsize */
- if (size == 0x2000)
- priv->num_recv_buffs = NUM_RECV_BUFFS_8;
- else
- priv->num_recv_buffs = NUM_RECV_BUFFS_16;
-
- printk(KERN_DEBUG "Memaddr: 0x%lx, Memsize: %d, ",
- dev->mem_start, size);
-
- if (dev->irq < 2) {
- unsigned long irq_mask;
-
- irq_mask = probe_irq_on();
- ni_reset586();
- ni_attn586();
-
- mdelay(20);
- dev->irq = probe_irq_off(irq_mask);
- if (!dev->irq) {
- printk("?autoirq, Failed to detect IRQ line!\n");
- retval = -EAGAIN;
- iounmap(priv->mapped);
- goto out;
- }
- printk("IRQ %d (autodetected).\n", dev->irq);
- } else {
- if (dev->irq == 2)
- dev->irq = 9;
- printk("IRQ %d (assigned and not checked!).\n", dev->irq);
- }
-
- dev->netdev_ops = &ni52_netdev_ops;
- dev->watchdog_timeo = HZ/20;
-
- return 0;
-out:
- release_region(ioaddr, NI52_TOTAL_SIZE);
- return retval;
-}
-
-/**********************************************
- * init the chip (ni52-interrupt should be disabled?!)
- * needs a correct 'allocated' memory
- */
-
-static int init586(struct net_device *dev)
-{
- void __iomem *ptr;
- int i, result = 0;
- struct priv *p = netdev_priv(dev);
- struct configure_cmd_struct __iomem *cfg_cmd;
- struct iasetup_cmd_struct __iomem *ias_cmd;
- struct tdr_cmd_struct __iomem *tdr_cmd;
- struct mcsetup_cmd_struct __iomem *mc_cmd;
- struct netdev_hw_addr *ha;
- int num_addrs = netdev_mc_count(dev);
-
- ptr = p->scb + 1;
-
- cfg_cmd = ptr; /* configure-command */
- writew(0, &cfg_cmd->cmd_status);
- writew(CMD_CONFIGURE | CMD_LAST, &cfg_cmd->cmd_cmd);
- writew(0xFFFF, &cfg_cmd->cmd_link);
-
- /* number of cfg bytes */
- writeb(0x0a, &cfg_cmd->byte_cnt);
- /* fifo-limit (8=tx:32/rx:64) */
- writeb(fifo, &cfg_cmd->fifo);
- /* hold or discard bad recv frames (bit 7) */
- writeb(0x40, &cfg_cmd->sav_bf);
- /* addr_len |!src_insert |pre-len |loopback */
- writeb(0x2e, &cfg_cmd->adr_len);
- writeb(0x00, &cfg_cmd->priority);
- writeb(0x60, &cfg_cmd->ifs);
- writeb(0x00, &cfg_cmd->time_low);
- writeb(0xf2, &cfg_cmd->time_high);
- writeb(0x00, &cfg_cmd->promisc);
- if (dev->flags & IFF_ALLMULTI) {
- int len = ((char __iomem *)p->iscp - (char __iomem *)ptr - 8) / 6;
- if (num_addrs > len) {
- printk(KERN_ERR "%s: switching to promisc. mode\n",
- dev->name);
- writeb(0x01, &cfg_cmd->promisc);
- }
- }
- if (dev->flags & IFF_PROMISC)
- writeb(0x01, &cfg_cmd->promisc);
- writeb(0x00, &cfg_cmd->carr_coll);
- writew(make16(cfg_cmd), &p->scb->cbl_offset);
- writeb(0, &p->scb->cmd_ruc);
-
- writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */
- ni_attn586();
-
- wait_for_stat_compl(cfg_cmd);
-
- if ((readw(&cfg_cmd->cmd_status) & (STAT_OK|STAT_COMPL)) !=
- (STAT_COMPL|STAT_OK)) {
- printk(KERN_ERR "%s: configure command failed: %x\n",
- dev->name, readw(&cfg_cmd->cmd_status));
- return 1;
- }
-
- /*
- * individual address setup
- */
-
- ias_cmd = ptr;
-
- writew(0, &ias_cmd->cmd_status);
- writew(CMD_IASETUP | CMD_LAST, &ias_cmd->cmd_cmd);
- writew(0xffff, &ias_cmd->cmd_link);
-
- memcpy_toio(&ias_cmd->iaddr, (char *)dev->dev_addr, ETH_ALEN);
-
- writew(make16(ias_cmd), &p->scb->cbl_offset);
-
- writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */
- ni_attn586();
-
- wait_for_stat_compl(ias_cmd);
-
- if ((readw(&ias_cmd->cmd_status) & (STAT_OK|STAT_COMPL)) !=
- (STAT_OK|STAT_COMPL)) {
- printk(KERN_ERR "%s (ni52): individual address setup command failed: %04x\n", dev->name, readw(&ias_cmd->cmd_status));
- return 1;
- }
-
- /*
- * TDR, wire check .. e.g. no resistor e.t.c
- */
-
- tdr_cmd = ptr;
-
- writew(0, &tdr_cmd->cmd_status);
- writew(CMD_TDR | CMD_LAST, &tdr_cmd->cmd_cmd);
- writew(0xffff, &tdr_cmd->cmd_link);
- writew(0, &tdr_cmd->status);
-
- writew(make16(tdr_cmd), &p->scb->cbl_offset);
- writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */
- ni_attn586();
-
- wait_for_stat_compl(tdr_cmd);
-
- if (!(readw(&tdr_cmd->cmd_status) & STAT_COMPL))
- printk(KERN_ERR "%s: Problems while running the TDR.\n",
- dev->name);
- else {
- udelay(16);
- result = readw(&tdr_cmd->status);
- writeb(readb(&p->scb->cus) & STAT_MASK, &p->scb->cmd_cuc);
- ni_attn586(); /* ack the interrupts */
-
- if (result & TDR_LNK_OK)
- ;
- else if (result & TDR_XCVR_PRB)
- printk(KERN_ERR "%s: TDR: Transceiver problem. Check the cable(s)!\n",
- dev->name);
- else if (result & TDR_ET_OPN)
- printk(KERN_ERR "%s: TDR: No correct termination %d clocks away.\n",
- dev->name, result & TDR_TIMEMASK);
- else if (result & TDR_ET_SRT) {
- /* time == 0 -> strange :-) */
- if (result & TDR_TIMEMASK)
- printk(KERN_ERR "%s: TDR: Detected a short circuit %d clocks away.\n",
- dev->name, result & TDR_TIMEMASK);
- } else
- printk(KERN_ERR "%s: TDR: Unknown status %04x\n",
- dev->name, result);
- }
-
- /*
- * Multicast setup
- */
- if (num_addrs && !(dev->flags & IFF_PROMISC)) {
- mc_cmd = ptr;
- writew(0, &mc_cmd->cmd_status);
- writew(CMD_MCSETUP | CMD_LAST, &mc_cmd->cmd_cmd);
- writew(0xffff, &mc_cmd->cmd_link);
- writew(num_addrs * 6, &mc_cmd->mc_cnt);
-
- i = 0;
- netdev_for_each_mc_addr(ha, dev)
- memcpy_toio(mc_cmd->mc_list[i++], ha->addr, 6);
-
- writew(make16(mc_cmd), &p->scb->cbl_offset);
- writeb(CUC_START, &p->scb->cmd_cuc);
- ni_attn586();
-
- wait_for_stat_compl(mc_cmd);
-
- if ((readw(&mc_cmd->cmd_status) & (STAT_COMPL|STAT_OK))
- != (STAT_COMPL|STAT_OK))
- printk(KERN_ERR "%s: Can't apply multicast-address-list.\n", dev->name);
- }
-
- /*
- * alloc nop/xmit-cmds
- */
-#if (NUM_XMIT_BUFFS == 1)
- for (i = 0; i < 2; i++) {
- p->nop_cmds[i] = ptr;
- writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd);
- writew(0, &p->nop_cmds[i]->cmd_status);
- writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link);
- ptr = ptr + sizeof(struct nop_cmd_struct);
- }
-#else
- for (i = 0; i < NUM_XMIT_BUFFS; i++) {
- p->nop_cmds[i] = ptr;
- writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd);
- writew(0, &p->nop_cmds[i]->cmd_status);
- writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link);
- ptr = ptr + sizeof(struct nop_cmd_struct);
- }
-#endif
-
- ptr = alloc_rfa(dev, ptr); /* init receive-frame-area */
-
- /*
- * alloc xmit-buffs / init xmit_cmds
- */
- for (i = 0; i < NUM_XMIT_BUFFS; i++) {
- /* Transmit cmd/buff 0 */
- p->xmit_cmds[i] = ptr;
- ptr = ptr + sizeof(struct transmit_cmd_struct);
- p->xmit_cbuffs[i] = ptr; /* char-buffs */
- ptr = ptr + XMIT_BUFF_SIZE;
- p->xmit_buffs[i] = ptr; /* TBD */
- ptr = ptr + sizeof(struct tbd_struct);
- if ((void __iomem *)ptr > (void __iomem *)p->iscp) {
- printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n",
- dev->name);
- return 1;
- }
- memset_io(p->xmit_cmds[i], 0,
- sizeof(struct transmit_cmd_struct));
- memset_io(p->xmit_buffs[i], 0,
- sizeof(struct tbd_struct));
- writew(make16(p->nop_cmds[(i+1)%NUM_XMIT_BUFFS]),
- &p->xmit_cmds[i]->cmd_link);
- writew(STAT_COMPL, &p->xmit_cmds[i]->cmd_status);
- writew(CMD_XMIT|CMD_INT, &p->xmit_cmds[i]->cmd_cmd);
- writew(make16(p->xmit_buffs[i]), &p->xmit_cmds[i]->tbd_offset);
- writew(0xffff, &p->xmit_buffs[i]->next);
- writel(make24(p->xmit_cbuffs[i]), &p->xmit_buffs[i]->buffer);
- }
-
- p->xmit_count = 0;
- p->xmit_last = 0;
-#ifndef NO_NOPCOMMANDS
- p->nop_point = 0;
-#endif
-
- /*
- * 'start transmitter'
- */
-#ifndef NO_NOPCOMMANDS
- writew(make16(p->nop_cmds[0]), &p->scb->cbl_offset);
- writeb(CUC_START, &p->scb->cmd_cuc);
- ni_attn586();
- wait_for_scb_cmd(dev);
-#else
- writew(make16(p->xmit_cmds[0]), &p->xmit_cmds[0]->cmd_link);
- writew(CMD_XMIT | CMD_SUSPEND | CMD_INT, &p->xmit_cmds[0]->cmd_cmd);
-#endif
-
- /*
- * ack. interrupts
- */
- writeb(readb(&p->scb->cus) & STAT_MASK, &p->scb->cmd_cuc);
- ni_attn586();
- udelay(16);
-
- ni_enaint();
-
- return 0;
-}
-
-/******************************************************
- * This is a helper routine for ni52_rnr_int() and init586().
- * It sets up the Receive Frame Area (RFA).
- */
-
-static void __iomem *alloc_rfa(struct net_device *dev, void __iomem *ptr)
-{
- struct rfd_struct __iomem *rfd = ptr;
- struct rbd_struct __iomem *rbd;
- int i;
- struct priv *p = netdev_priv(dev);
-
- memset_io(rfd, 0,
- sizeof(struct rfd_struct) * (p->num_recv_buffs + rfdadd));
- p->rfd_first = rfd;
-
- for (i = 0; i < (p->num_recv_buffs + rfdadd); i++) {
- writew(make16(rfd + (i+1) % (p->num_recv_buffs+rfdadd)),
- &rfd[i].next);
- writew(0xffff, &rfd[i].rbd_offset);
- }
- /* RU suspend */
- writeb(RFD_SUSP, &rfd[p->num_recv_buffs-1+rfdadd].last);
-
- ptr = rfd + (p->num_recv_buffs + rfdadd);
-
- rbd = ptr;
- ptr = rbd + p->num_recv_buffs;
-
- /* clr descriptors */
- memset_io(rbd, 0, sizeof(struct rbd_struct) * (p->num_recv_buffs));
-
- for (i = 0; i < p->num_recv_buffs; i++) {
- writew(make16(rbd + (i+1) % p->num_recv_buffs), &rbd[i].next);
- writew(RECV_BUFF_SIZE, &rbd[i].size);
- writel(make24(ptr), &rbd[i].buffer);
- ptr = ptr + RECV_BUFF_SIZE;
- }
- p->rfd_top = p->rfd_first;
- p->rfd_last = p->rfd_first + (p->num_recv_buffs - 1 + rfdadd);
-
- writew(make16(p->rfd_first), &p->scb->rfa_offset);
- writew(make16(rbd), &p->rfd_first->rbd_offset);
-
- return ptr;
-}
-
-
-/**************************************************
- * Interrupt Handler ...
- */
-
-static irqreturn_t ni52_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- unsigned int stat;
- int cnt = 0;
- struct priv *p;
-
- p = netdev_priv(dev);
-
- if (debuglevel > 1)
- printk("I");
-
- spin_lock(&p->spinlock);
-
- wait_for_scb_cmd(dev); /* wait for last command */
-
- while ((stat = readb(&p->scb->cus) & STAT_MASK)) {
- writeb(stat, &p->scb->cmd_cuc);
- ni_attn586();
-
- if (stat & STAT_FR) /* received a frame */
- ni52_rcv_int(dev);
-
- if (stat & STAT_RNR) { /* RU went 'not ready' */
- printk("(R)");
- if (readb(&p->scb->rus) & RU_SUSPEND) {
- /* special case: RU_SUSPEND */
- wait_for_scb_cmd(dev);
- writeb(RUC_RESUME, &p->scb->cmd_ruc);
- ni_attn586();
- wait_for_scb_cmd_ruc(dev);
- } else {
- printk(KERN_ERR "%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n",
- dev->name, stat, readb(&p->scb->rus));
- ni52_rnr_int(dev);
- }
- }
-
- /* Command with I-bit set complete */
- if (stat & STAT_CX)
- ni52_xmt_int(dev);
-
-#ifndef NO_NOPCOMMANDS
- if (stat & STAT_CNA) { /* CU went 'not ready' */
- if (netif_running(dev))
- printk(KERN_ERR "%s: oops! CU has left active state. stat: %04x/%02x.\n",
- dev->name, stat, readb(&p->scb->cus));
- }
-#endif
-
- if (debuglevel > 1)
- printk("%d", cnt++);
-
- /* Wait for ack. (ni52_xmt_int can be faster than ack!!) */
- wait_for_scb_cmd(dev);
- if (readb(&p->scb->cmd_cuc)) { /* timed out? */
- printk(KERN_ERR "%s: Acknowledge timed out.\n",
- dev->name);
- ni_disint();
- break;
- }
- }
- spin_unlock(&p->spinlock);
-
- if (debuglevel > 1)
- printk("i");
- return IRQ_HANDLED;
-}
-
-/*******************************************************
- * receive-interrupt
- */
-
-static void ni52_rcv_int(struct net_device *dev)
-{
- int status, cnt = 0;
- unsigned short totlen;
- struct sk_buff *skb;
- struct rbd_struct __iomem *rbd;
- struct priv *p = netdev_priv(dev);
-
- if (debuglevel > 0)
- printk("R");
-
- for (; (status = readb(&p->rfd_top->stat_high)) & RFD_COMPL;) {
- rbd = make32(readw(&p->rfd_top->rbd_offset));
- if (status & RFD_OK) { /* frame received without error? */
- totlen = readw(&rbd->status);
- if (totlen & RBD_LAST) {
- /* the first and the last buffer? */
- totlen &= RBD_MASK; /* length of this frame */
- writew(0x00, &rbd->status);
- skb = netdev_alloc_skb(dev, totlen + 2);
- if (skb != NULL) {
- skb_reserve(skb, 2);
- skb_put(skb, totlen);
- memcpy_fromio(skb->data, p->base + readl(&rbd->buffer), totlen);
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += totlen;
- } else
- dev->stats.rx_dropped++;
- } else {
- int rstat;
- /* free all RBD's until RBD_LAST is set */
- totlen = 0;
- while (!((rstat = readw(&rbd->status)) & RBD_LAST)) {
- totlen += rstat & RBD_MASK;
- if (!rstat) {
- printk(KERN_ERR "%s: Whoops .. no end mark in RBD list\n", dev->name);
- break;
- }
- writew(0, &rbd->status);
- rbd = make32(readw(&rbd->next));
- }
- totlen += rstat & RBD_MASK;
- writew(0, &rbd->status);
- printk(KERN_ERR "%s: received oversized frame! length: %d\n",
- dev->name, totlen);
- dev->stats.rx_dropped++;
- }
- } else {/* frame !(ok), only with 'save-bad-frames' */
- printk(KERN_ERR "%s: oops! rfd-error-status: %04x\n",
- dev->name, status);
- dev->stats.rx_errors++;
- }
- writeb(0, &p->rfd_top->stat_high);
- writeb(RFD_SUSP, &p->rfd_top->last); /* maybe exchange by RFD_LAST */
- writew(0xffff, &p->rfd_top->rbd_offset);
- writeb(0, &p->rfd_last->last); /* delete RFD_SUSP */
- p->rfd_last = p->rfd_top;
- p->rfd_top = make32(readw(&p->rfd_top->next)); /* step to next RFD */
- writew(make16(p->rfd_top), &p->scb->rfa_offset);
-
- if (debuglevel > 0)
- printk("%d", cnt++);
- }
-
- if (automatic_resume) {
- wait_for_scb_cmd(dev);
- writeb(RUC_RESUME, &p->scb->cmd_ruc);
- ni_attn586();
- wait_for_scb_cmd_ruc(dev);
- }
-
-#ifdef WAIT_4_BUSY
- {
- int i;
- for (i = 0; i < 1024; i++) {
- if (p->rfd_top->status)
- break;
- udelay(16);
- if (i == 1023)
- printk(KERN_ERR "%s: RU hasn't fetched next RFD (not busy/complete)\n", dev->name);
- }
- }
-#endif
- if (debuglevel > 0)
- printk("r");
-}
-
-/**********************************************************
- * handle 'Receiver went not ready'.
- */
-
-static void ni52_rnr_int(struct net_device *dev)
-{
- struct priv *p = netdev_priv(dev);
-
- dev->stats.rx_errors++;
-
- wait_for_scb_cmd(dev); /* wait for the last cmd, WAIT_4_FULLSTAT?? */
- writeb(RUC_ABORT, &p->scb->cmd_ruc); /* usually the RU is in the 'no resource'-state .. abort it now. */
- ni_attn586();
- wait_for_scb_cmd_ruc(dev); /* wait for accept cmd. */
-
- alloc_rfa(dev, p->rfd_first);
- /* maybe add a check here, before restarting the RU */
- startrecv586(dev); /* restart RU */
-
- printk(KERN_ERR "%s: Receive-Unit restarted. Status: %04x\n",
- dev->name, readb(&p->scb->rus));
-
-}
-
-/**********************************************************
- * handle xmit - interrupt
- */
-
-static void ni52_xmt_int(struct net_device *dev)
-{
- int status;
- struct priv *p = netdev_priv(dev);
-
- if (debuglevel > 0)
- printk("X");
-
- status = readw(&p->xmit_cmds[p->xmit_last]->cmd_status);
- if (!(status & STAT_COMPL))
- printk(KERN_ERR "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name);
-
- if (status & STAT_OK) {
- dev->stats.tx_packets++;
- dev->stats.collisions += (status & TCMD_MAXCOLLMASK);
- } else {
- dev->stats.tx_errors++;
- if (status & TCMD_LATECOLL) {
- printk(KERN_ERR "%s: late collision detected.\n",
- dev->name);
- dev->stats.collisions++;
- } else if (status & TCMD_NOCARRIER) {
- dev->stats.tx_carrier_errors++;
- printk(KERN_ERR "%s: no carrier detected.\n",
- dev->name);
- } else if (status & TCMD_LOSTCTS)
- printk(KERN_ERR "%s: loss of CTS detected.\n",
- dev->name);
- else if (status & TCMD_UNDERRUN) {
- dev->stats.tx_fifo_errors++;
- printk(KERN_ERR "%s: DMA underrun detected.\n",
- dev->name);
- } else if (status & TCMD_MAXCOLL) {
- printk(KERN_ERR "%s: Max. collisions exceeded.\n",
- dev->name);
- dev->stats.collisions += 16;
- }
- }
-#if (NUM_XMIT_BUFFS > 1)
- if ((++p->xmit_last) == NUM_XMIT_BUFFS)
- p->xmit_last = 0;
-#endif
- netif_wake_queue(dev);
-}
-
-/***********************************************************
- * (re)start the receiver
- */
-
-static void startrecv586(struct net_device *dev)
-{
- struct priv *p = netdev_priv(dev);
-
- wait_for_scb_cmd(dev);
- wait_for_scb_cmd_ruc(dev);
- writew(make16(p->rfd_first), &p->scb->rfa_offset);
- writeb(RUC_START, &p->scb->cmd_ruc);
- ni_attn586(); /* start cmd. */
- wait_for_scb_cmd_ruc(dev);
- /* wait for accept cmd. (no timeout!!) */
-}
-
-static void ni52_timeout(struct net_device *dev)
-{
- struct priv *p = netdev_priv(dev);
-#ifndef NO_NOPCOMMANDS
- if (readb(&p->scb->cus) & CU_ACTIVE) { /* COMMAND-UNIT active? */
- netif_wake_queue(dev);
-#ifdef DEBUG
- printk(KERN_ERR "%s: strange ... timeout with CU active?!?\n",
- dev->name);
- printk(KERN_ERR "%s: X0: %04x N0: %04x N1: %04x %d\n",
- dev->name, (int)p->xmit_cmds[0]->cmd_status,
- readw(&p->nop_cmds[0]->cmd_status),
- readw(&p->nop_cmds[1]->cmd_status),
- p->nop_point);
-#endif
- writeb(CUC_ABORT, &p->scb->cmd_cuc);
- ni_attn586();
- wait_for_scb_cmd(dev);
- writew(make16(p->nop_cmds[p->nop_point]), &p->scb->cbl_offset);
- writeb(CUC_START, &p->scb->cmd_cuc);
- ni_attn586();
- wait_for_scb_cmd(dev);
- dev->trans_start = jiffies; /* prevent tx timeout */
- return 0;
- }
-#endif
- {
-#ifdef DEBUG
- printk(KERN_ERR "%s: xmitter timed out, try to restart! stat: %02x\n",
- dev->name, readb(&p->scb->cus));
- printk(KERN_ERR "%s: command-stats: %04x %04x\n",
- dev->name,
- readw(&p->xmit_cmds[0]->cmd_status),
- readw(&p->xmit_cmds[1]->cmd_status));
- printk(KERN_ERR "%s: check, whether you set the right interrupt number!\n",
- dev->name);
-#endif
- ni52_close(dev);
- ni52_open(dev);
- }
- dev->trans_start = jiffies; /* prevent tx timeout */
-}
-
-/******************************************************
- * send frame
- */
-
-static netdev_tx_t ni52_send_packet(struct sk_buff *skb,
- struct net_device *dev)
-{
- int len, i;
-#ifndef NO_NOPCOMMANDS
- int next_nop;
-#endif
- struct priv *p = netdev_priv(dev);
-
- if (skb->len > XMIT_BUFF_SIZE) {
- printk(KERN_ERR "%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n", dev->name, XMIT_BUFF_SIZE, skb->len);
- return NETDEV_TX_OK;
- }
-
- netif_stop_queue(dev);
-
- memcpy_toio(p->xmit_cbuffs[p->xmit_count], skb->data, skb->len);
- len = skb->len;
- if (len < ETH_ZLEN) {
- len = ETH_ZLEN;
- memset_io(p->xmit_cbuffs[p->xmit_count]+skb->len, 0,
- len - skb->len);
- }
-
-#if (NUM_XMIT_BUFFS == 1)
-# ifdef NO_NOPCOMMANDS
-
-#ifdef DEBUG
- if (readb(&p->scb->cus) & CU_ACTIVE) {
- printk(KERN_ERR "%s: Hmmm .. CU is still running and we wanna send a new packet.\n", dev->name);
- printk(KERN_ERR "%s: stat: %04x %04x\n",
- dev->name, readb(&p->scb->cus),
- readw(&p->xmit_cmds[0]->cmd_status));
- }
-#endif
- writew(TBD_LAST | len, &p->xmit_buffs[0]->size);
- for (i = 0; i < 16; i++) {
- writew(0, &p->xmit_cmds[0]->cmd_status);
- wait_for_scb_cmd(dev);
- if ((readb(&p->scb->cus) & CU_STATUS) == CU_SUSPEND)
- writeb(CUC_RESUME, &p->scb->cmd_cuc);
- else {
- writew(make16(p->xmit_cmds[0]), &p->scb->cbl_offset);
- writeb(CUC_START, &p->scb->cmd_cuc);
- }
- ni_attn586();
- if (!i)
- dev_kfree_skb(skb);
- wait_for_scb_cmd(dev);
- /* test it, because CU sometimes doesn't start immediately */
- if (readb(&p->scb->cus) & CU_ACTIVE)
- break;
- if (readw(&p->xmit_cmds[0]->cmd_status))
- break;
- if (i == 15)
- printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name);
- }
-# else
- next_nop = (p->nop_point + 1) & 0x1;
- writew(TBD_LAST | len, &p->xmit_buffs[0]->size);
- writew(make16(p->nop_cmds[next_nop]), &p->xmit_cmds[0]->cmd_link);
- writew(make16(p->nop_cmds[next_nop]),
- &p->nop_cmds[next_nop]->cmd_link);
- writew(0, &p->xmit_cmds[0]->cmd_status);
- writew(0, &p->nop_cmds[next_nop]->cmd_status);
-
- writew(make16(p->xmit_cmds[0]), &p->nop_cmds[p->nop_point]->cmd_link);
- p->nop_point = next_nop;
- dev_kfree_skb(skb);
-# endif
-#else
- writew(TBD_LAST | len, &p->xmit_buffs[p->xmit_count]->size);
- next_nop = p->xmit_count + 1
- if (next_nop == NUM_XMIT_BUFFS)
- next_nop = 0;
- writew(0, &p->xmit_cmds[p->xmit_count]->cmd_status);
- /* linkpointer of xmit-command already points to next nop cmd */
- writew(make16(p->nop_cmds[next_nop]),
- &p->nop_cmds[next_nop]->cmd_link);
- writew(0, &p->nop_cmds[next_nop]->cmd_status);
- writew(make16(p->xmit_cmds[p->xmit_count]),
- &p->nop_cmds[p->xmit_count]->cmd_link);
- p->xmit_count = next_nop;
- {
- unsigned long flags;
- spin_lock_irqsave(&p->spinlock);
- if (p->xmit_count != p->xmit_last)
- netif_wake_queue(dev);
- spin_unlock_irqrestore(&p->spinlock);
- }
- dev_kfree_skb(skb);
-#endif
- return NETDEV_TX_OK;
-}
-
-/*******************************************
- * Someone wanna have the statistics
- */
-
-static struct net_device_stats *ni52_get_stats(struct net_device *dev)
-{
- struct priv *p = netdev_priv(dev);
- unsigned short crc, aln, rsc, ovrn;
-
- /* Get error-statistics from the ni82586 */
- crc = readw(&p->scb->crc_errs);
- writew(0, &p->scb->crc_errs);
- aln = readw(&p->scb->aln_errs);
- writew(0, &p->scb->aln_errs);
- rsc = readw(&p->scb->rsc_errs);
- writew(0, &p->scb->rsc_errs);
- ovrn = readw(&p->scb->ovrn_errs);
- writew(0, &p->scb->ovrn_errs);
-
- dev->stats.rx_crc_errors += crc;
- dev->stats.rx_fifo_errors += ovrn;
- dev->stats.rx_frame_errors += aln;
- dev->stats.rx_dropped += rsc;
-
- return &dev->stats;
-}
-
-/********************************************************
- * Set MC list ..
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
- netif_stop_queue(dev);
- ni_disint();
- alloc586(dev);
- init586(dev);
- startrecv586(dev);
- ni_enaint();
- netif_wake_queue(dev);
-}
-
-#ifdef MODULE
-static struct net_device *dev_ni52;
-
-module_param(io, int, 0);
-module_param(irq, int, 0);
-module_param(memstart, long, 0);
-module_param(memend, long, 0);
-MODULE_PARM_DESC(io, "NI5210 I/O base address,required");
-MODULE_PARM_DESC(irq, "NI5210 IRQ number,required");
-MODULE_PARM_DESC(memstart, "NI5210 memory base address,required");
-MODULE_PARM_DESC(memend, "NI5210 memory end address,required");
-
-int __init init_module(void)
-{
- if (io <= 0x0 || !memend || !memstart || irq < 2) {
- printk(KERN_ERR "ni52: Autoprobing not allowed for modules.\n");
- printk(KERN_ERR "ni52: Set symbols 'io' 'irq' 'memstart' and 'memend'\n");
- return -ENODEV;
- }
- dev_ni52 = ni52_probe(-1);
- if (IS_ERR(dev_ni52))
- return PTR_ERR(dev_ni52);
- return 0;
-}
-
-void __exit cleanup_module(void)
-{
- struct priv *p = netdev_priv(dev_ni52);
- unregister_netdev(dev_ni52);
- iounmap(p->mapped);
- release_region(dev_ni52->base_addr, NI52_TOTAL_SIZE);
- free_netdev(dev_ni52);
-}
-#endif /* MODULE */
-
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Intel i82586 Ethernet definitions
- *
- * This is an extension to the Linux operating system, and is covered by the
- * same GNU General Public License that covers that work.
- *
- * copyrights (c) 1994 by Michael Hipp (hippm@informatik.uni-tuebingen.de)
- *
- * I have done a look in the following sources:
- * crynwr-packet-driver by Russ Nelson
- * Garret A. Wollman's i82586-driver for BSD
- */
-
-
-#define NI52_RESET 0 /* writing to this address, resets the i82586 */
-#define NI52_ATTENTION 1 /* channel attention, kick the 586 */
-#define NI52_TENA 3 /* 2-5 possibly wrong, Xmit enable */
-#define NI52_TDIS 2 /* Xmit disable */
-#define NI52_INTENA 5 /* Interrupt enable */
-#define NI52_INTDIS 4 /* Interrupt disable */
-#define NI52_MAGIC1 6 /* dunno exact function */
-#define NI52_MAGIC2 7 /* dunno exact function */
-
-#define NI52_MAGICVAL1 0x00 /* magic-values for ni5210 card */
-#define NI52_MAGICVAL2 0x55
-
-/*
- * where to find the System Configuration Pointer (SCP)
- */
-#define SCP_DEFAULT_ADDRESS 0xfffff4
-
-
-/*
- * System Configuration Pointer Struct
- */
-
-struct scp_struct
-{
- u16 zero_dum0; /* has to be zero */
- u8 sysbus; /* 0=16Bit,1=8Bit */
- u8 zero_dum1; /* has to be zero for 586 */
- u16 zero_dum2;
- u16 zero_dum3;
- u32 iscp; /* pointer to the iscp-block */
-};
-
-
-/*
- * Intermediate System Configuration Pointer (ISCP)
- */
-struct iscp_struct
-{
- u8 busy; /* 586 clears after successful init */
- u8 zero_dummy; /* has to be zero */
- u16 scb_offset; /* pointeroffset to the scb_base */
- u32 scb_base; /* base-address of all 16-bit offsets */
-};
-
-/*
- * System Control Block (SCB)
- */
-struct scb_struct
-{
- u8 rus;
- u8 cus;
- u8 cmd_ruc; /* command word: RU part */
- u8 cmd_cuc; /* command word: CU part & ACK */
- u16 cbl_offset; /* pointeroffset, command block list */
- u16 rfa_offset; /* pointeroffset, receive frame area */
- u16 crc_errs; /* CRC-Error counter */
- u16 aln_errs; /* alignmenterror counter */
- u16 rsc_errs; /* Resourceerror counter */
- u16 ovrn_errs; /* OVerrunerror counter */
-};
-
-/*
- * possible command values for the command word
- */
-#define RUC_MASK 0x0070 /* mask for RU commands */
-#define RUC_NOP 0x0000 /* NOP-command */
-#define RUC_START 0x0010 /* start RU */
-#define RUC_RESUME 0x0020 /* resume RU after suspend */
-#define RUC_SUSPEND 0x0030 /* suspend RU */
-#define RUC_ABORT 0x0040 /* abort receiver operation immediately */
-
-#define CUC_MASK 0x07 /* mask for CU command */
-#define CUC_NOP 0x00 /* NOP-command */
-#define CUC_START 0x01 /* start execution of 1. cmd on the CBL */
-#define CUC_RESUME 0x02 /* resume after suspend */
-#define CUC_SUSPEND 0x03 /* Suspend CU */
-#define CUC_ABORT 0x04 /* abort command operation immediately */
-
-#define ACK_MASK 0xf0 /* mask for ACK command */
-#define ACK_CX 0x80 /* acknowledges STAT_CX */
-#define ACK_FR 0x40 /* ack. STAT_FR */
-#define ACK_CNA 0x20 /* ack. STAT_CNA */
-#define ACK_RNR 0x10 /* ack. STAT_RNR */
-
-/*
- * possible status values for the status word
- */
-#define STAT_MASK 0xf0 /* mask for cause of interrupt */
-#define STAT_CX 0x80 /* CU finished cmd with its I bit set */
-#define STAT_FR 0x40 /* RU finished receiving a frame */
-#define STAT_CNA 0x20 /* CU left active state */
-#define STAT_RNR 0x10 /* RU left ready state */
-
-#define CU_STATUS 0x7 /* CU status, 0=idle */
-#define CU_SUSPEND 0x1 /* CU is suspended */
-#define CU_ACTIVE 0x2 /* CU is active */
-
-#define RU_STATUS 0x70 /* RU status, 0=idle */
-#define RU_SUSPEND 0x10 /* RU suspended */
-#define RU_NOSPACE 0x20 /* RU no resources */
-#define RU_READY 0x40 /* RU is ready */
-
-/*
- * Receive Frame Descriptor (RFD)
- */
-struct rfd_struct
-{
- u8 stat_low; /* status word */
- u8 stat_high; /* status word */
- u8 rfd_sf; /* 82596 mode only */
- u8 last; /* Bit15,Last Frame on List / Bit14,suspend */
- u16 next; /* linkoffset to next RFD */
- u16 rbd_offset; /* pointeroffset to RBD-buffer */
- u8 dest[6]; /* ethernet-address, destination */
- u8 source[6]; /* ethernet-address, source */
- u16 length; /* 802.3 frame-length */
- u16 zero_dummy; /* dummy */
-};
-
-#define RFD_LAST 0x80 /* last: last rfd in the list */
-#define RFD_SUSP 0x40 /* last: suspend RU after */
-#define RFD_COMPL 0x80
-#define RFD_OK 0x20
-#define RFD_BUSY 0x40
-#define RFD_ERR_LEN 0x10 /* Length error (if enabled length-checking */
-#define RFD_ERR_CRC 0x08 /* CRC error */
-#define RFD_ERR_ALGN 0x04 /* Alignment error */
-#define RFD_ERR_RNR 0x02 /* status: receiver out of resources */
-#define RFD_ERR_OVR 0x01 /* DMA Overrun! */
-
-#define RFD_ERR_FTS 0x0080 /* Frame to short */
-#define RFD_ERR_NEOP 0x0040 /* No EOP flag (for bitstuffing only) */
-#define RFD_ERR_TRUN 0x0020 /* (82596 only/SF mode) indicates truncated frame */
-#define RFD_MATCHADD 0x0002 /* status: Destinationaddress !matches IA (only 82596) */
-#define RFD_COLLDET 0x0001 /* Detected collision during reception */
-
-/*
- * Receive Buffer Descriptor (RBD)
- */
-struct rbd_struct
-{
- u16 status; /* status word,number of used bytes in buff */
- u16 next; /* pointeroffset to next RBD */
- u32 buffer; /* receive buffer address pointer */
- u16 size; /* size of this buffer */
- u16 zero_dummy; /* dummy */
-};
-
-#define RBD_LAST 0x8000 /* last buffer */
-#define RBD_USED 0x4000 /* this buffer has data */
-#define RBD_MASK 0x3fff /* size-mask for length */
-
-/*
- * Statusvalues for Commands/RFD
- */
-#define STAT_COMPL 0x8000 /* status: frame/command is complete */
-#define STAT_BUSY 0x4000 /* status: frame/command is busy */
-#define STAT_OK 0x2000 /* status: frame/command is ok */
-
-/*
- * Action-Commands
- */
-#define CMD_NOP 0x0000 /* NOP */
-#define CMD_IASETUP 0x0001 /* initial address setup command */
-#define CMD_CONFIGURE 0x0002 /* configure command */
-#define CMD_MCSETUP 0x0003 /* MC setup command */
-#define CMD_XMIT 0x0004 /* transmit command */
-#define CMD_TDR 0x0005 /* time domain reflectometer (TDR) command */
-#define CMD_DUMP 0x0006 /* dump command */
-#define CMD_DIAGNOSE 0x0007 /* diagnose command */
-
-/*
- * Action command bits
- */
-#define CMD_LAST 0x8000 /* indicates last command in the CBL */
-#define CMD_SUSPEND 0x4000 /* suspend CU after this CB */
-#define CMD_INT 0x2000 /* generate interrupt after execution */
-
-/*
- * NOP - command
- */
-struct nop_cmd_struct
-{
- u16 cmd_status; /* status of this command */
- u16 cmd_cmd; /* the command itself (+bits) */
- u16 cmd_link; /* offsetpointer to next command */
-};
-
-/*
- * IA Setup command
- */
-struct iasetup_cmd_struct
-{
- u16 cmd_status;
- u16 cmd_cmd;
- u16 cmd_link;
- u8 iaddr[6];
-};
-
-/*
- * Configure command
- */
-struct configure_cmd_struct
-{
- u16 cmd_status;
- u16 cmd_cmd;
- u16 cmd_link;
- u8 byte_cnt; /* size of the config-cmd */
- u8 fifo; /* fifo/recv monitor */
- u8 sav_bf; /* save bad frames (bit7=1)*/
- u8 adr_len; /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/
- u8 priority; /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */
- u8 ifs; /* inter frame spacing */
- u8 time_low; /* slot time low */
- u8 time_high; /* slot time high(0-2) and max. retries(4-7) */
- u8 promisc; /* promisc-mode(0) , et al (1-7) */
- u8 carr_coll; /* carrier(0-3)/collision(4-7) stuff */
- u8 fram_len; /* minimal frame len */
- u8 dummy; /* dummy */
-};
-
-/*
- * Multicast Setup command
- */
-struct mcsetup_cmd_struct
-{
- u16 cmd_status;
- u16 cmd_cmd;
- u16 cmd_link;
- u16 mc_cnt; /* number of bytes in the MC-List */
- u8 mc_list[0][6]; /* pointer to 6 bytes entries */
-};
-
-/*
- * DUMP command
- */
-struct dump_cmd_struct
-{
- u16 cmd_status;
- u16 cmd_cmd;
- u16 cmd_link;
- u16 dump_offset; /* pointeroffset to DUMP space */
-};
-
-/*
- * transmit command
- */
-struct transmit_cmd_struct
-{
- u16 cmd_status;
- u16 cmd_cmd;
- u16 cmd_link;
- u16 tbd_offset; /* pointeroffset to TBD */
- u8 dest[6]; /* destination address of the frame */
- u16 length; /* user defined: 802.3 length / Ether type */
-};
-
-#define TCMD_ERRMASK 0x0fa0
-#define TCMD_MAXCOLLMASK 0x000f
-#define TCMD_MAXCOLL 0x0020
-#define TCMD_HEARTBEAT 0x0040
-#define TCMD_DEFERRED 0x0080
-#define TCMD_UNDERRUN 0x0100
-#define TCMD_LOSTCTS 0x0200
-#define TCMD_NOCARRIER 0x0400
-#define TCMD_LATECOLL 0x0800
-
-struct tdr_cmd_struct
-{
- u16 cmd_status;
- u16 cmd_cmd;
- u16 cmd_link;
- u16 status;
-};
-
-#define TDR_LNK_OK 0x8000 /* No link problem identified */
-#define TDR_XCVR_PRB 0x4000 /* indicates a transceiver problem */
-#define TDR_ET_OPN 0x2000 /* open, no correct termination */
-#define TDR_ET_SRT 0x1000 /* TDR detected a short circuit */
-#define TDR_TIMEMASK 0x07ff /* mask for the time field */
-
-/*
- * Transmit Buffer Descriptor (TBD)
- */
-struct tbd_struct
-{
- u16 size; /* size + EOF-Flag(15) */
- u16 next; /* pointeroffset to next TBD */
- u32 buffer; /* pointer to buffer */
-};
-
-#define TBD_LAST 0x8000 /* EOF-Flag, indicates last buffer in list */
-
-
-
-
projects / kernel.git / commitdiff