]> git.baikalelectronics.ru Git - kernel.git/commitdiff
xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
authorMathias Nyman <mathias.nyman@linux.intel.com>
Fri, 8 Apr 2016 13:25:10 +0000 (16:25 +0300)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 13 Apr 2016 18:55:56 +0000 (11:55 -0700)
PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will
remove the xhci controller from the PCI bus when the last USB device is
disconnected.

Add a flag to indicate that the host is being removed to avoid queueing
configure_endpoint commands for the dropped endpoints.
For PCI hotplugged controllers this will prevent 5 second command timeouts
For static xhci controllers the configure_endpoint command is not needed
in the removal case as everything will be returned, freed, and the
controller is reset.

For now the flag is only set for PCI connected host controllers.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/xhci-pci.c
drivers/usb/host/xhci-ring.c
drivers/usb/host/xhci.c
drivers/usb/host/xhci.h

index 071b34ae9c4e79893f0036cee3b95868d65f2e5e..48672fac7ff3eb22389acfb4889a513e8ac79948 100644 (file)
@@ -304,6 +304,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
        struct xhci_hcd *xhci;
 
        xhci = hcd_to_xhci(pci_get_drvdata(dev));
+       xhci->xhc_state |= XHCI_STATE_REMOVING;
        if (xhci->shared_hcd) {
                usb_remove_hcd(xhci->shared_hcd);
                usb_put_hcd(xhci->shared_hcd);
index 7cf66212ceae0cfbe1c161877044755057373781..99b4ff42f7a0148afa63c0da65371c4bee522664 100644 (file)
@@ -4004,7 +4004,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
        int reserved_trbs = xhci->cmd_ring_reserved_trbs;
        int ret;
 
-       if (xhci->xhc_state) {
+       if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+               (xhci->xhc_state & XHCI_STATE_HALTED)) {
                xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
                return -ESHUTDOWN;
        }
index 9283d3331b599bc423c91e5e3535520f476e9d52..9e71c96ad74a8de43f78f611f1b8db5490007995 100644 (file)
@@ -147,7 +147,8 @@ static int xhci_start(struct xhci_hcd *xhci)
                                "waited %u microseconds.\n",
                                XHCI_MAX_HALT_USEC);
        if (!ret)
-               xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+               /* clear state flags. Including dying, halted or removing */
+               xhci->xhc_state = 0;
 
        return ret;
 }
@@ -2773,7 +2774,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
        if (ret <= 0)
                return ret;
        xhci = hcd_to_xhci(hcd);
-       if (xhci->xhc_state & XHCI_STATE_DYING)
+       if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+               (xhci->xhc_state & XHCI_STATE_REMOVING))
                return -ENODEV;
 
        xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
@@ -3820,7 +3822,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
        mutex_lock(&xhci->mutex);
 
-       if (xhci->xhc_state)    /* dying or halted */
+       if (xhci->xhc_state)    /* dying, removing or halted */
                goto out;
 
        if (!udev->slot_id) {
index 70f215c20b2b5b074d2f947ea98382102efc88d8..6c629c97f8ad09e6e292fc4513206cb9a5860ec1 100644 (file)
@@ -1605,6 +1605,7 @@ struct xhci_hcd {
  */
 #define XHCI_STATE_DYING       (1 << 0)
 #define XHCI_STATE_HALTED      (1 << 1)
+#define XHCI_STATE_REMOVING    (1 << 2)
        /* Statistics */
        int                     error_bitmask;
        unsigned int            quirks;