F: Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
F: drivers/gpu/drm/panel/panel-novatek-nt35510.c
+DRM DRIVER FOR NOVATEK NT35560 PANELS
+M: Linus Walleij <linus.walleij@linaro.org>
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
+F: drivers/gpu/drm/panel/panel-novatek-nt35560.c
+
DRM DRIVER FOR NOVATEK NT36672A PANELS
M: Sumit Semwal <sumit.semwal@linaro.org>
S: Maintained
F: Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
F: drivers/gpu/drm/tiny/st7735r.c
-DRM DRIVER FOR SONY ACX424AKP PANELS
-M: Linus Walleij <linus.walleij@linaro.org>
-S: Maintained
-T: git git://anongit.freedesktop.org/drm/drm-misc
-F: drivers/gpu/drm/panel/panel-sony-acx424akp.c
-
DRM DRIVER FOR ST-ERICSSON MCDE
M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
around the Novatek NT35510 display controller, such as some
Hydis panels.
+config DRM_PANEL_NOVATEK_NT35560
+ tristate "Novatek NT35560 DSI command mode panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+ help
+ Say Y here if you want to enable the Novatek NT35560 display
+ controller. This panel supports DSI in both command and video
+ mode. This supports several panels such as Sony ACX424AKM and
+ ACX424AKP.
+
config DRM_PANEL_NOVATEK_NT35950
tristate "Novatek NT35950 DSI panel"
depends on OF
Say Y here if you want to enable support for the Sitronix
ST7789V controller for 240x320 LCD panels
-config DRM_PANEL_SONY_ACX424AKP
- tristate "Sony ACX424AKP DSI command mode panel"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- select VIDEOMODE_HELPERS
- help
- Say Y here if you want to enable the Sony ACX424 display
- panel. This panel supports DSI in both command and video
- mode.
-
config DRM_PANEL_SONY_ACX565AKM
tristate "Sony ACX565AKM panel"
depends on GPIOLIB && OF && SPI
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
+obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35560) += panel-novatek-nt35560.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35950) += panel-novatek-nt35950.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672A) += panel-novatek-nt36672a.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
-obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MIPI-DSI Novatek NT35560-based panel controller.
+ *
+ * Supported panels include:
+ * Sony ACX424AKM - a 480x854 AMOLED DSI panel
+ * Sony ACX424AKP - a 480x864 AMOLED DSI panel
+ *
+ * Copyright (C) Linaro Ltd. 2019-2021
+ * Author: Linus Walleij
+ * Based on code and know-how from Marcus Lorentzon
+ * Copyright (C) ST-Ericsson SA 2010
+ */
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#define NT35560_DCS_READ_ID1 0xDA
+#define NT35560_DCS_READ_ID2 0xDB
+#define NT35560_DCS_READ_ID3 0xDC
+#define NT35560_DCS_SET_MDDI 0xAE
+
+/*
+ * Sony seems to use vendor ID 0x81
+ */
+#define DISPLAY_SONY_ACX424AKP_ID1 0x811b
+#define DISPLAY_SONY_ACX424AKP_ID2 0x811a
+/*
+ * The third ID looks like a bug, vendor IDs begin at 0x80
+ * and panel 00 ... seems like default values.
+ */
+#define DISPLAY_SONY_ACX424AKP_ID3 0x8000
+
+struct nt35560 {
+ struct drm_panel panel;
+ struct device *dev;
+ struct regulator *supply;
+ struct gpio_desc *reset_gpio;
+ bool video_mode;
+};
+
+static const struct drm_display_mode sony_acx424akp_vid_mode = {
+ .clock = 27234,
+ .hdisplay = 480,
+ .hsync_start = 480 + 15,
+ .hsync_end = 480 + 15 + 0,
+ .htotal = 480 + 15 + 0 + 15,
+ .vdisplay = 864,
+ .vsync_start = 864 + 14,
+ .vsync_end = 864 + 14 + 1,
+ .vtotal = 864 + 14 + 1 + 11,
+ .width_mm = 48,
+ .height_mm = 84,
+ .flags = DRM_MODE_FLAG_PVSYNC,
+};
+
+/*
+ * The timings are not very helpful as the display is used in
+ * command mode using the maximum HS frequency.
+ */
+static const struct drm_display_mode sony_acx424akp_cmd_mode = {
+ .clock = 35478,
+ .hdisplay = 480,
+ .hsync_start = 480 + 154,
+ .hsync_end = 480 + 154 + 16,
+ .htotal = 480 + 154 + 16 + 32,
+ .vdisplay = 864,
+ .vsync_start = 864 + 1,
+ .vsync_end = 864 + 1 + 1,
+ .vtotal = 864 + 1 + 1 + 1,
+ /*
+ * Some desired refresh rate, experiments at the maximum "pixel"
+ * clock speed (HS clock 420 MHz) yields around 117Hz.
+ */
+ .width_mm = 48,
+ .height_mm = 84,
+};
+
+static inline struct nt35560 *panel_to_nt35560(struct drm_panel *panel)
+{
+ return container_of(panel, struct nt35560, panel);
+}
+
+#define FOSC 20 /* 20Mhz */
+#define SCALE_FACTOR_NS_DIV_MHZ 1000
+
+static int nt35560_set_brightness(struct backlight_device *bl)
+{
+ struct nt35560 *nt = bl_get_data(bl);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
+ int period_ns = 1023;
+ int duty_ns = bl->props.brightness;
+ u8 pwm_ratio;
+ u8 pwm_div;
+ u8 par;
+ int ret;
+
+ if (backlight_is_blank(bl)) {
+ /* Disable backlight */
+ par = 0x00;
+ ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+ &par, 1);
+ if (ret) {
+ dev_err(nt->dev, "failed to disable display backlight (%d)\n", ret);
+ return ret;
+ }
+ return 0;
+ }
+
+ /* Calculate the PWM duty cycle in n/256's */
+ pwm_ratio = max(((duty_ns * 256) / period_ns) - 1, 1);
+ pwm_div = max(1,
+ ((FOSC * period_ns) / 256) /
+ SCALE_FACTOR_NS_DIV_MHZ);
+
+ /* Set up PWM dutycycle ONE byte (differs from the standard) */
+ dev_dbg(nt->dev, "calculated duty cycle %02x\n", pwm_ratio);
+ ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
+ &pwm_ratio, 1);
+ if (ret < 0) {
+ dev_err(nt->dev, "failed to set display PWM ratio (%d)\n", ret);
+ return ret;
+ }
+
+ /*
+ * Sequence to write PWMDIV:
+ * address data
+ * 0xF3 0xAA CMD2 Unlock
+ * 0x00 0x01 Enter CMD2 page 0
+ * 0X7D 0x01 No reload MTP of CMD2 P1
+ * 0x22 PWMDIV
+ * 0x7F 0xAA CMD2 page 1 lock
+ */
+ par = 0xaa;
+ ret = mipi_dsi_dcs_write(dsi, 0xf3, &par, 1);
+ if (ret < 0) {
+ dev_err(nt->dev, "failed to unlock CMD 2 (%d)\n", ret);
+ return ret;
+ }
+ par = 0x01;
+ ret = mipi_dsi_dcs_write(dsi, 0x00, &par, 1);
+ if (ret < 0) {
+ dev_err(nt->dev, "failed to enter page 1 (%d)\n", ret);
+ return ret;
+ }
+ par = 0x01;
+ ret = mipi_dsi_dcs_write(dsi, 0x7d, &par, 1);
+ if (ret < 0) {
+ dev_err(nt->dev, "failed to disable MTP reload (%d)\n", ret);
+ return ret;
+ }
+ ret = mipi_dsi_dcs_write(dsi, 0x22, &pwm_div, 1);
+ if (ret < 0) {
+ dev_err(nt->dev, "failed to set PWM divisor (%d)\n", ret);
+ return ret;
+ }
+ par = 0xaa;
+ ret = mipi_dsi_dcs_write(dsi, 0x7f, &par, 1);
+ if (ret < 0) {
+ dev_err(nt->dev, "failed to lock CMD 2 (%d)\n", ret);
+ return ret;
+ }
+
+ /* Enable backlight */
+ par = 0x24;
+ ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+ &par, 1);
+ if (ret < 0) {
+ dev_err(nt->dev, "failed to enable display backlight (%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct backlight_ops nt35560_bl_ops = {
+ .update_status = nt35560_set_brightness,
+};
+
+static const struct backlight_properties nt35560_bl_props = {
+ .type = BACKLIGHT_RAW,
+ .brightness = 512,
+ .max_brightness = 1023,
+};
+
+static int nt35560_read_id(struct nt35560 *nt)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
+ u8 vendor, version, panel;
+ u16 val;
+ int ret;
+
+ ret = mipi_dsi_dcs_read(dsi, NT35560_DCS_READ_ID1, &vendor, 1);
+ if (ret < 0) {
+ dev_err(nt->dev, "could not vendor ID byte\n");
+ return ret;
+ }
+ ret = mipi_dsi_dcs_read(dsi, NT35560_DCS_READ_ID2, &version, 1);
+ if (ret < 0) {
+ dev_err(nt->dev, "could not read device version byte\n");
+ return ret;
+ }
+ ret = mipi_dsi_dcs_read(dsi, NT35560_DCS_READ_ID3, &panel, 1);
+ if (ret < 0) {
+ dev_err(nt->dev, "could not read panel ID byte\n");
+ return ret;
+ }
+
+ if (vendor == 0x00) {
+ dev_err(nt->dev, "device vendor ID is zero\n");
+ return -ENODEV;
+ }
+
+ val = (vendor << 8) | panel;
+ switch (val) {
+ case DISPLAY_SONY_ACX424AKP_ID1:
+ case DISPLAY_SONY_ACX424AKP_ID2:
+ case DISPLAY_SONY_ACX424AKP_ID3:
+ dev_info(nt->dev, "MTP vendor: %02x, version: %02x, panel: %02x\n",
+ vendor, version, panel);
+ break;
+ default:
+ dev_info(nt->dev, "unknown vendor: %02x, version: %02x, panel: %02x\n",
+ vendor, version, panel);
+ break;
+ }
+
+ return 0;
+}
+
+static int nt35560_power_on(struct nt35560 *nt)
+{
+ int ret;
+
+ ret = regulator_enable(nt->supply);
+ if (ret) {
+ dev_err(nt->dev, "failed to enable supply (%d)\n", ret);
+ return ret;
+ }
+
+ /* Assert RESET */
+ gpiod_set_value_cansleep(nt->reset_gpio, 1);
+ udelay(20);
+ /* De-assert RESET */
+ gpiod_set_value_cansleep(nt->reset_gpio, 0);
+ usleep_range(11000, 20000);
+
+ return 0;
+}
+
+static void nt35560_power_off(struct nt35560 *nt)
+{
+ /* Assert RESET */
+ gpiod_set_value_cansleep(nt->reset_gpio, 1);
+ usleep_range(11000, 20000);
+
+ regulator_disable(nt->supply);
+}
+
+static int nt35560_prepare(struct drm_panel *panel)
+{
+ struct nt35560 *nt = panel_to_nt35560(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
+ const u8 mddi = 3;
+ int ret;
+
+ ret = nt35560_power_on(nt);
+ if (ret)
+ return ret;
+
+ ret = nt35560_read_id(nt);
+ if (ret) {
+ dev_err(nt->dev, "failed to read panel ID (%d)\n", ret);
+ goto err_power_off;
+ }
+
+ /* Enabe tearing mode: send TE (tearing effect) at VBLANK */
+ ret = mipi_dsi_dcs_set_tear_on(dsi,
+ MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+ if (ret) {
+ dev_err(nt->dev, "failed to enable vblank TE (%d)\n", ret);
+ goto err_power_off;
+ }
+
+ /*
+ * Set MDDI
+ *
+ * This presumably deactivates the Qualcomm MDDI interface and
+ * selects DSI, similar code is found in other drivers such as the
+ * Sharp LS043T1LE01 which makes us suspect that this panel may be
+ * using a Novatek NT35565 or similar display driver chip that shares
+ * this command. Due to the lack of documentation we cannot know for
+ * sure.
+ */
+ ret = mipi_dsi_dcs_write(dsi, NT35560_DCS_SET_MDDI,
+ &mddi, sizeof(mddi));
+ if (ret < 0) {
+ dev_err(nt->dev, "failed to set MDDI (%d)\n", ret);
+ goto err_power_off;
+ }
+
+ /* Exit sleep mode */
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret) {
+ dev_err(nt->dev, "failed to exit sleep mode (%d)\n", ret);
+ goto err_power_off;
+ }
+ msleep(140);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret) {
+ dev_err(nt->dev, "failed to turn display on (%d)\n", ret);
+ goto err_power_off;
+ }
+ if (nt->video_mode) {
+ /* In video mode turn peripheral on */
+ ret = mipi_dsi_turn_on_peripheral(dsi);
+ if (ret) {
+ dev_err(nt->dev, "failed to turn on peripheral\n");
+ goto err_power_off;
+ }
+ }
+
+ return 0;
+
+err_power_off:
+ nt35560_power_off(nt);
+ return ret;
+}
+
+static int nt35560_unprepare(struct drm_panel *panel)
+{
+ struct nt35560 *nt = panel_to_nt35560(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
+ int ret;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret) {
+ dev_err(nt->dev, "failed to turn display off (%d)\n", ret);
+ return ret;
+ }
+
+ /* Enter sleep mode */
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret) {
+ dev_err(nt->dev, "failed to enter sleep mode (%d)\n", ret);
+ return ret;
+ }
+ msleep(85);
+
+ nt35560_power_off(nt);
+
+ return 0;
+}
+
+
+static int nt35560_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct nt35560 *nt = panel_to_nt35560(panel);
+ struct drm_display_mode *mode;
+
+ if (nt->video_mode)
+ mode = drm_mode_duplicate(connector->dev,
+ &sony_acx424akp_vid_mode);
+ else
+ mode = drm_mode_duplicate(connector->dev,
+ &sony_acx424akp_cmd_mode);
+ if (!mode) {
+ dev_err(panel->dev, "bad mode or failed to add mode\n");
+ return -EINVAL;
+ }
+ drm_mode_set_name(mode);
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
+
+ drm_mode_probed_add(connector, mode);
+
+ return 1; /* Number of modes */
+}
+
+static const struct drm_panel_funcs nt35560_drm_funcs = {
+ .unprepare = nt35560_unprepare,
+ .prepare = nt35560_prepare,
+ .get_modes = nt35560_get_modes,
+};
+
+static int nt35560_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct nt35560 *nt;
+ int ret;
+
+ nt = devm_kzalloc(dev, sizeof(struct nt35560), GFP_KERNEL);
+ if (!nt)
+ return -ENOMEM;
+ nt->video_mode = of_property_read_bool(dev->of_node,
+ "enforce-video-mode");
+
+ mipi_dsi_set_drvdata(dsi, nt);
+ nt->dev = dev;
+
+ dsi->lanes = 2;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ /*
+ * FIXME: these come from the ST-Ericsson vendor driver for the
+ * HREF520 and seems to reflect limitations in the PLLs on that
+ * platform, if you have the datasheet, please cross-check the
+ * actual max rates.
+ */
+ dsi->lp_rate = 19200000;
+ dsi->hs_rate = 420160000;
+
+ if (nt->video_mode)
+ /* Burst mode using event for sync */
+ dsi->mode_flags =
+ MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_BURST;
+ else
+ dsi->mode_flags =
+ MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+ nt->supply = devm_regulator_get(dev, "vddi");
+ if (IS_ERR(nt->supply))
+ return PTR_ERR(nt->supply);
+
+ /* This asserts RESET by default */
+ nt->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(nt->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(nt->reset_gpio),
+ "failed to request GPIO\n");
+
+ drm_panel_init(&nt->panel, dev, &nt35560_drm_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ nt->panel.backlight = devm_backlight_device_register(dev, "nt35560", dev, nt,
+ &nt35560_bl_ops, &nt35560_bl_props);
+ if (IS_ERR(nt->panel.backlight))
+ return dev_err_probe(dev, PTR_ERR(nt->panel.backlight),
+ "failed to register backlight device\n");
+
+ drm_panel_add(&nt->panel);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ drm_panel_remove(&nt->panel);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int nt35560_remove(struct mipi_dsi_device *dsi)
+{
+ struct nt35560 *nt = mipi_dsi_get_drvdata(dsi);
+
+ mipi_dsi_detach(dsi);
+ drm_panel_remove(&nt->panel);
+
+ return 0;
+}
+
+static const struct of_device_id nt35560_of_match[] = {
+ { .compatible = "sony,acx424akp" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, nt35560_of_match);
+
+static struct mipi_dsi_driver nt35560_driver = {
+ .probe = nt35560_probe,
+ .remove = nt35560_remove,
+ .driver = {
+ .name = "panel-novatek-nt35560",
+ .of_match_table = nt35560_of_match,
+ },
+};
+module_mipi_dsi_driver(nt35560_driver);
+
+MODULE_AUTHOR("Linus Wallei <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("MIPI-DSI Novatek NT35560 Panel Driver");
+MODULE_LICENSE("GPL v2");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * MIPI-DSI Sony ACX424AKP panel driver. This is a 480x864
- * AMOLED panel with a command-only DSI interface.
- *
- * Copyright (C) Linaro Ltd. 2019
- * Author: Linus Walleij
- * Based on code and know-how from Marcus Lorentzon
- * Copyright (C) ST-Ericsson SA 2010
- */
-#include <linux/backlight.h>
-#include <linux/delay.h>
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/regulator/consumer.h>
-
-#include <video/mipi_display.h>
-
-#include <drm/drm_mipi_dsi.h>
-#include <drm/drm_modes.h>
-#include <drm/drm_panel.h>
-
-#define ACX424_DCS_READ_ID1 0xDA
-#define ACX424_DCS_READ_ID2 0xDB
-#define ACX424_DCS_READ_ID3 0xDC
-#define ACX424_DCS_SET_MDDI 0xAE
-
-/*
- * Sony seems to use vendor ID 0x81
- */
-#define DISPLAY_SONY_ACX424AKP_ID1 0x811b
-#define DISPLAY_SONY_ACX424AKP_ID2 0x811a
-/*
- * The third ID looks like a bug, vendor IDs begin at 0x80
- * and panel 00 ... seems like default values.
- */
-#define DISPLAY_SONY_ACX424AKP_ID3 0x8000
-
-struct acx424akp {
- struct drm_panel panel;
- struct device *dev;
- struct regulator *supply;
- struct gpio_desc *reset_gpio;
- bool video_mode;
-};
-
-static const struct drm_display_mode sony_acx424akp_vid_mode = {
- .clock = 27234,
- .hdisplay = 480,
- .hsync_start = 480 + 15,
- .hsync_end = 480 + 15 + 0,
- .htotal = 480 + 15 + 0 + 15,
- .vdisplay = 864,
- .vsync_start = 864 + 14,
- .vsync_end = 864 + 14 + 1,
- .vtotal = 864 + 14 + 1 + 11,
- .width_mm = 48,
- .height_mm = 84,
- .flags = DRM_MODE_FLAG_PVSYNC,
-};
-
-/*
- * The timings are not very helpful as the display is used in
- * command mode using the maximum HS frequency.
- */
-static const struct drm_display_mode sony_acx424akp_cmd_mode = {
- .clock = 35478,
- .hdisplay = 480,
- .hsync_start = 480 + 154,
- .hsync_end = 480 + 154 + 16,
- .htotal = 480 + 154 + 16 + 32,
- .vdisplay = 864,
- .vsync_start = 864 + 1,
- .vsync_end = 864 + 1 + 1,
- .vtotal = 864 + 1 + 1 + 1,
- /*
- * Some desired refresh rate, experiments at the maximum "pixel"
- * clock speed (HS clock 420 MHz) yields around 117Hz.
- */
- .width_mm = 48,
- .height_mm = 84,
-};
-
-static inline struct acx424akp *panel_to_acx424akp(struct drm_panel *panel)
-{
- return container_of(panel, struct acx424akp, panel);
-}
-
-#define FOSC 20 /* 20Mhz */
-#define SCALE_FACTOR_NS_DIV_MHZ 1000
-
-static int acx424akp_set_brightness(struct backlight_device *bl)
-{
- struct acx424akp *acx = bl_get_data(bl);
- struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
- int period_ns = 1023;
- int duty_ns = bl->props.brightness;
- u8 pwm_ratio;
- u8 pwm_div;
- u8 par;
- int ret;
-
- if (backlight_is_blank(bl)) {
- /* Disable backlight */
- par = 0x00;
- ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
- &par, 1);
- if (ret) {
- dev_err(acx->dev, "failed to disable display backlight (%d)\n", ret);
- return ret;
- }
- return 0;
- }
-
- /* Calculate the PWM duty cycle in n/256's */
- pwm_ratio = max(((duty_ns * 256) / period_ns) - 1, 1);
- pwm_div = max(1,
- ((FOSC * period_ns) / 256) /
- SCALE_FACTOR_NS_DIV_MHZ);
-
- /* Set up PWM dutycycle ONE byte (differs from the standard) */
- dev_dbg(acx->dev, "calculated duty cycle %02x\n", pwm_ratio);
- ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
- &pwm_ratio, 1);
- if (ret < 0) {
- dev_err(acx->dev, "failed to set display PWM ratio (%d)\n", ret);
- return ret;
- }
-
- /*
- * Sequence to write PWMDIV:
- * address data
- * 0xF3 0xAA CMD2 Unlock
- * 0x00 0x01 Enter CMD2 page 0
- * 0X7D 0x01 No reload MTP of CMD2 P1
- * 0x22 PWMDIV
- * 0x7F 0xAA CMD2 page 1 lock
- */
- par = 0xaa;
- ret = mipi_dsi_dcs_write(dsi, 0xf3, &par, 1);
- if (ret < 0) {
- dev_err(acx->dev, "failed to unlock CMD 2 (%d)\n", ret);
- return ret;
- }
- par = 0x01;
- ret = mipi_dsi_dcs_write(dsi, 0x00, &par, 1);
- if (ret < 0) {
- dev_err(acx->dev, "failed to enter page 1 (%d)\n", ret);
- return ret;
- }
- par = 0x01;
- ret = mipi_dsi_dcs_write(dsi, 0x7d, &par, 1);
- if (ret < 0) {
- dev_err(acx->dev, "failed to disable MTP reload (%d)\n", ret);
- return ret;
- }
- ret = mipi_dsi_dcs_write(dsi, 0x22, &pwm_div, 1);
- if (ret < 0) {
- dev_err(acx->dev, "failed to set PWM divisor (%d)\n", ret);
- return ret;
- }
- par = 0xaa;
- ret = mipi_dsi_dcs_write(dsi, 0x7f, &par, 1);
- if (ret < 0) {
- dev_err(acx->dev, "failed to lock CMD 2 (%d)\n", ret);
- return ret;
- }
-
- /* Enable backlight */
- par = 0x24;
- ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
- &par, 1);
- if (ret < 0) {
- dev_err(acx->dev, "failed to enable display backlight (%d)\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-static const struct backlight_ops acx424akp_bl_ops = {
- .update_status = acx424akp_set_brightness,
-};
-
-static const struct backlight_properties acx424akp_bl_props = {
- .type = BACKLIGHT_RAW,
- .brightness = 512,
- .max_brightness = 1023,
-};
-
-static int acx424akp_read_id(struct acx424akp *acx)
-{
- struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
- u8 vendor, version, panel;
- u16 val;
- int ret;
-
- ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID1, &vendor, 1);
- if (ret < 0) {
- dev_err(acx->dev, "could not vendor ID byte\n");
- return ret;
- }
- ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID2, &version, 1);
- if (ret < 0) {
- dev_err(acx->dev, "could not read device version byte\n");
- return ret;
- }
- ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID3, &panel, 1);
- if (ret < 0) {
- dev_err(acx->dev, "could not read panel ID byte\n");
- return ret;
- }
-
- if (vendor == 0x00) {
- dev_err(acx->dev, "device vendor ID is zero\n");
- return -ENODEV;
- }
-
- val = (vendor << 8) | panel;
- switch (val) {
- case DISPLAY_SONY_ACX424AKP_ID1:
- case DISPLAY_SONY_ACX424AKP_ID2:
- case DISPLAY_SONY_ACX424AKP_ID3:
- dev_info(acx->dev, "MTP vendor: %02x, version: %02x, panel: %02x\n",
- vendor, version, panel);
- break;
- default:
- dev_info(acx->dev, "unknown vendor: %02x, version: %02x, panel: %02x\n",
- vendor, version, panel);
- break;
- }
-
- return 0;
-}
-
-static int acx424akp_power_on(struct acx424akp *acx)
-{
- int ret;
-
- ret = regulator_enable(acx->supply);
- if (ret) {
- dev_err(acx->dev, "failed to enable supply (%d)\n", ret);
- return ret;
- }
-
- /* Assert RESET */
- gpiod_set_value_cansleep(acx->reset_gpio, 1);
- udelay(20);
- /* De-assert RESET */
- gpiod_set_value_cansleep(acx->reset_gpio, 0);
- usleep_range(11000, 20000);
-
- return 0;
-}
-
-static void acx424akp_power_off(struct acx424akp *acx)
-{
- /* Assert RESET */
- gpiod_set_value_cansleep(acx->reset_gpio, 1);
- usleep_range(11000, 20000);
-
- regulator_disable(acx->supply);
-}
-
-static int acx424akp_prepare(struct drm_panel *panel)
-{
- struct acx424akp *acx = panel_to_acx424akp(panel);
- struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
- const u8 mddi = 3;
- int ret;
-
- ret = acx424akp_power_on(acx);
- if (ret)
- return ret;
-
- ret = acx424akp_read_id(acx);
- if (ret) {
- dev_err(acx->dev, "failed to read panel ID (%d)\n", ret);
- goto err_power_off;
- }
-
- /* Enabe tearing mode: send TE (tearing effect) at VBLANK */
- ret = mipi_dsi_dcs_set_tear_on(dsi,
- MIPI_DSI_DCS_TEAR_MODE_VBLANK);
- if (ret) {
- dev_err(acx->dev, "failed to enable vblank TE (%d)\n", ret);
- goto err_power_off;
- }
-
- /*
- * Set MDDI
- *
- * This presumably deactivates the Qualcomm MDDI interface and
- * selects DSI, similar code is found in other drivers such as the
- * Sharp LS043T1LE01 which makes us suspect that this panel may be
- * using a Novatek NT35565 or similar display driver chip that shares
- * this command. Due to the lack of documentation we cannot know for
- * sure.
- */
- ret = mipi_dsi_dcs_write(dsi, ACX424_DCS_SET_MDDI,
- &mddi, sizeof(mddi));
- if (ret < 0) {
- dev_err(acx->dev, "failed to set MDDI (%d)\n", ret);
- goto err_power_off;
- }
-
- /* Exit sleep mode */
- ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
- if (ret) {
- dev_err(acx->dev, "failed to exit sleep mode (%d)\n", ret);
- goto err_power_off;
- }
- msleep(140);
-
- ret = mipi_dsi_dcs_set_display_on(dsi);
- if (ret) {
- dev_err(acx->dev, "failed to turn display on (%d)\n", ret);
- goto err_power_off;
- }
- if (acx->video_mode) {
- /* In video mode turn peripheral on */
- ret = mipi_dsi_turn_on_peripheral(dsi);
- if (ret) {
- dev_err(acx->dev, "failed to turn on peripheral\n");
- goto err_power_off;
- }
- }
-
- return 0;
-
-err_power_off:
- acx424akp_power_off(acx);
- return ret;
-}
-
-static int acx424akp_unprepare(struct drm_panel *panel)
-{
- struct acx424akp *acx = panel_to_acx424akp(panel);
- struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
- int ret;
-
- ret = mipi_dsi_dcs_set_display_off(dsi);
- if (ret) {
- dev_err(acx->dev, "failed to turn display off (%d)\n", ret);
- return ret;
- }
-
- /* Enter sleep mode */
- ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
- if (ret) {
- dev_err(acx->dev, "failed to enter sleep mode (%d)\n", ret);
- return ret;
- }
- msleep(85);
-
- acx424akp_power_off(acx);
-
- return 0;
-}
-
-
-static int acx424akp_get_modes(struct drm_panel *panel,
- struct drm_connector *connector)
-{
- struct acx424akp *acx = panel_to_acx424akp(panel);
- struct drm_display_mode *mode;
-
- if (acx->video_mode)
- mode = drm_mode_duplicate(connector->dev,
- &sony_acx424akp_vid_mode);
- else
- mode = drm_mode_duplicate(connector->dev,
- &sony_acx424akp_cmd_mode);
- if (!mode) {
- dev_err(panel->dev, "bad mode or failed to add mode\n");
- return -EINVAL;
- }
- drm_mode_set_name(mode);
- mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
-
- connector->display_info.width_mm = mode->width_mm;
- connector->display_info.height_mm = mode->height_mm;
-
- drm_mode_probed_add(connector, mode);
-
- return 1; /* Number of modes */
-}
-
-static const struct drm_panel_funcs acx424akp_drm_funcs = {
- .unprepare = acx424akp_unprepare,
- .prepare = acx424akp_prepare,
- .get_modes = acx424akp_get_modes,
-};
-
-static int acx424akp_probe(struct mipi_dsi_device *dsi)
-{
- struct device *dev = &dsi->dev;
- struct acx424akp *acx;
- int ret;
-
- acx = devm_kzalloc(dev, sizeof(struct acx424akp), GFP_KERNEL);
- if (!acx)
- return -ENOMEM;
- acx->video_mode = of_property_read_bool(dev->of_node,
- "enforce-video-mode");
-
- mipi_dsi_set_drvdata(dsi, acx);
- acx->dev = dev;
-
- dsi->lanes = 2;
- dsi->format = MIPI_DSI_FMT_RGB888;
- /*
- * FIXME: these come from the ST-Ericsson vendor driver for the
- * HREF520 and seems to reflect limitations in the PLLs on that
- * platform, if you have the datasheet, please cross-check the
- * actual max rates.
- */
- dsi->lp_rate = 19200000;
- dsi->hs_rate = 420160000;
-
- if (acx->video_mode)
- /* Burst mode using event for sync */
- dsi->mode_flags =
- MIPI_DSI_MODE_VIDEO |
- MIPI_DSI_MODE_VIDEO_BURST;
- else
- dsi->mode_flags =
- MIPI_DSI_CLOCK_NON_CONTINUOUS;
-
- acx->supply = devm_regulator_get(dev, "vddi");
- if (IS_ERR(acx->supply))
- return PTR_ERR(acx->supply);
-
- /* This asserts RESET by default */
- acx->reset_gpio = devm_gpiod_get_optional(dev, "reset",
- GPIOD_OUT_HIGH);
- if (IS_ERR(acx->reset_gpio))
- return dev_err_probe(dev, PTR_ERR(acx->reset_gpio),
- "failed to request GPIO\n");
-
- drm_panel_init(&acx->panel, dev, &acx424akp_drm_funcs,
- DRM_MODE_CONNECTOR_DSI);
-
- acx->panel.backlight = devm_backlight_device_register(dev, "acx424akp", dev, acx,
- &acx424akp_bl_ops, &acx424akp_bl_props);
- if (IS_ERR(acx->panel.backlight))
- return dev_err_probe(dev, PTR_ERR(acx->panel.backlight),
- "failed to register backlight device\n");
-
- drm_panel_add(&acx->panel);
-
- ret = mipi_dsi_attach(dsi);
- if (ret < 0) {
- drm_panel_remove(&acx->panel);
- return ret;
- }
-
- return 0;
-}
-
-static int acx424akp_remove(struct mipi_dsi_device *dsi)
-{
- struct acx424akp *acx = mipi_dsi_get_drvdata(dsi);
-
- mipi_dsi_detach(dsi);
- drm_panel_remove(&acx->panel);
-
- return 0;
-}
-
-static const struct of_device_id acx424akp_of_match[] = {
- { .compatible = "sony,acx424akp" },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, acx424akp_of_match);
-
-static struct mipi_dsi_driver acx424akp_driver = {
- .probe = acx424akp_probe,
- .remove = acx424akp_remove,
- .driver = {
- .name = "panel-sony-acx424akp",
- .of_match_table = acx424akp_of_match,
- },
-};
-module_mipi_dsi_driver(acx424akp_driver);
-
-MODULE_AUTHOR("Linus Wallei <linus.walleij@linaro.org>");
-MODULE_DESCRIPTION("MIPI-DSI Sony acx424akp Panel Driver");
-MODULE_LICENSE("GPL v2");
projects / kernel.git / commitdiff