]> git.baikalelectronics.ru Git - uboot.git/commitdiff
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM on PDK3
authorMarek Vasut <marex@denx.de>
Thu, 2 Mar 2023 22:40:44 +0000 (23:40 +0100)
committerStefano Babic <sbabic@denx.de>
Thu, 30 Mar 2023 06:40:27 +0000 (08:40 +0200)
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK3 carrier board.
Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD,
SPI NOR and USB 3.0 host.

Signed-off-by: Marek Vasut <marex@denx.de>
arch/arm/dts/Makefile
arch/arm/dts/imx8mp-dhcom-pdk3-u-boot.dtsi [new file with mode: 0644]
arch/arm/dts/imx8mp-dhcom-pdk3.dts [new file with mode: 0644]
configs/imx8mp_dhcom_pdk3_defconfig [new file with mode: 0644]

index c160e884bf6317aaa88b0156d8dd019d3ff47272..a8b55fe7377ec8bd638d322b585ce3c97372ca15 100644 (file)
@@ -996,6 +996,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
        imx8mq-mnt-reform2.dtb \
        imx8mq-phanbell.dtb \
        imx8mp-dhcom-pdk2.dtb \
+       imx8mp-dhcom-pdk3.dtb \
        imx8mp-evk.dtb \
        imx8mp-icore-mx8mp-edimm2.2.dtb \
        imx8mp-msc-sm2s.dtb \
diff --git a/arch/arm/dts/imx8mp-dhcom-pdk3-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-pdk3-u-boot.dtsi
new file mode 100644 (file)
index 0000000..040f333
--- /dev/null
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx8mp-dhcom-u-boot.dtsi"
diff --git a/arch/arm/dts/imx8mp-dhcom-pdk3.dts b/arch/arm/dts/imx8mp-dhcom-pdk3.dts
new file mode 100644 (file)
index 0000000..c5f0607
--- /dev/null
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * PDK3 PCB number: 669-100 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+       model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)";
+       compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som",
+                    "fsl,imx8mp";
+
+       chosen {
+               stdout-path = &uart1;
+       };
+
+       clk_ext_audio_codec: clock-codec {
+               #clock-cells = <0>;
+               clock-frequency = <24000000>;
+               compatible = "fixed-clock";
+       };
+
+       clk_xtal25: clk-xtal25 {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <25000000>;
+       };
+
+       connector {
+               compatible = "usb-c-connector";
+               label = "USB-C";
+               data-role = "dual";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               usb_c_0_hs_ep: endpoint {
+                                       remote-endpoint = <&dwc3_0_hs_ep>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               usb_c_0_ss_ep: endpoint {
+                                       remote-endpoint = <&ptn5150_in_ep>;
+                               };
+                       };
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               button-0 {
+                       gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
+                       label = "TA1-GPIO-A";
+                       linux,code = <KEY_A>;
+                       pinctrl-0 = <&pinctrl_dhcom_a>;
+                       pinctrl-names = "default";
+                       wakeup-source;
+               };
+
+               button-1 {
+                       gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
+                       label = "TA2-GPIO-B";
+                       linux,code = <KEY_B>;
+                       pinctrl-0 = <&pinctrl_dhcom_b>;
+                       pinctrl-names = "default";
+                       wakeup-source;
+               };
+
+               button-2 {
+                       gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+                       label = "TA3-GPIO-C";
+                       linux,code = <KEY_C>;
+                       pinctrl-0 = <&pinctrl_dhcom_c>;
+                       pinctrl-names = "default";
+                       wakeup-source;
+               };
+
+               button-3 {
+                       gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */
+                       label = "TA4-GPIO-E";
+                       linux,code = <KEY_E>;
+                       pinctrl-0 = <&pinctrl_dhcom_e>;
+                       pinctrl-names = "default";
+                       wakeup-source;
+               };
+       };
+
+       led {
+               compatible = "gpio-leds";
+
+               led-0 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       default-state = "off";
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <0>;
+                       gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */
+                       pinctrl-0 = <&pinctrl_dhcom_d>;
+                       pinctrl-names = "default";
+               };
+
+               led-1 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       default-state = "off";
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <1>;
+                       gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
+                       pinctrl-0 = <&pinctrl_dhcom_f>;
+                       pinctrl-names = "default";
+               };
+
+               led-2 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       default-state = "off";
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <2>;
+                       gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */
+                       pinctrl-0 = <&pinctrl_dhcom_g>;
+                       pinctrl-names = "default";
+               };
+
+               led-3 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       default-state = "off";
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <3>;
+                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+                       pinctrl-0 = <&pinctrl_dhcom_i>;
+                       pinctrl-names = "default";
+               };
+       };
+
+       reg_avdd: regulator-avdd {      /* AUDIO_VDD */
+               compatible = "regulator-fixed";
+               regulator-always-on;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-name = "AUDIO_VDD";
+       };
+};
+
+&i2c5 {
+       i2cmux@70 {
+               compatible = "nxp,pca9540";
+               reg = <0x70>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               i2cmuxed0: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+
+                       typec@3d {
+                               compatible = "nxp,ptn5150";
+                               reg = <0x3d>;
+                               interrupt-parent = <&gpio4>;
+                               interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_ptn5150>;
+                               status = "okay";
+
+                               ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       port@0 {
+                                               reg = <0>;
+
+                                               ptn5150_in_ep: endpoint {
+                                                       remote-endpoint = <&usb_c_0_ss_ep>;
+                                               };
+                                       };
+
+                                       port@1 {
+                                               reg = <1>;
+
+                                               ptn5150_out_ep: endpoint {
+                                                       remote-endpoint = <&dwc3_0_ss_ep>;
+                                               };
+                                       };
+                               };
+                       };
+
+                       power-sensor@40 {
+                           compatible = "ti,ina238";
+                           reg = <0x40>;
+                           shunt-resistor = <20000>;   /* 0.02 R */
+                           ti,shunt-gain = <1>;        /* Drop cca. 40mV */
+                       };
+
+                       eeprom_board: eeprom@54 {
+                               compatible = "atmel,24c04";
+                               pagesize = <16>;
+                               reg = <0x54>;
+                       };
+
+                       pcieclk: clk@6b {
+                               compatible = "skyworks,si52144";
+                               reg = <0x6b>;
+                               clocks = <&clk_xtal25>;
+                               #clock-cells = <1>;
+                       };
+               };
+
+               i2cmuxed1: i2c@1 {      /* HDMI DDC I2C */
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+               };
+       };
+};
+
+&ethphy0g {
+       reg = <7>;
+};
+
+&fec { /* Second ethernet */
+       pinctrl-0 = <&pinctrl_fec_rgmii>;
+       phy-handle = <&ethphypdk>;
+       phy-mode = "rgmii-id";
+
+       mdio {
+               ethphypdk: ethernet-phy@7 { /* Micrel KSZ9131RNXI */
+                       compatible = "ethernet-phy-id0022.1642",
+                                    "ethernet-phy-ieee802.3-c22";
+                       interrupt-parent = <&gpio4>;
+                       interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+                       pinctrl-0 = <&pinctrl_ethphy1>;
+                       pinctrl-names = "default";
+                       reg = <7>;
+                       reset-assert-us = <1000>;
+                       /* RESET_N signal rise time ~100ms */
+                       reset-deassert-us = <120000>;
+                       reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+                       status = "okay";
+               };
+       };
+};
+
+&flexcan1 {
+       status = "okay";
+};
+
+&pcie_phy {
+       clocks = <&pcieclk 1>;
+       clock-names = "ref";
+       fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+       status = "okay";
+};
+
+&pcie {
+       fsl,max-link-speed = <3>;
+       reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
+
+&usb_dwc3_0 {
+       usb-role-switch;
+
+       port {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               dwc3_0_hs_ep: endpoint@0 {
+                       reg = <0>;
+                       remote-endpoint = <&usb_c_0_hs_ep>;
+               };
+
+               dwc3_0_ss_ep: endpoint@1 {
+                       reg = <1>;
+                       remote-endpoint = <&ptn5150_out_ep>;
+               };
+       };
+};
+
+&usb3_1 {
+       fsl,disable-port-power-control;
+       fsl,permanently-attached;
+};
+
+&usb_dwc3_1 {
+       /* This port has USB5734 Hub connected to it, PWR/OC pins are unused */
+       /delete-property/ pinctrl-names;
+       /delete-property/ pinctrl-0;
+};
+
+&iomuxc {
+       /*
+        * GPIO_A,B,C,E are connected to buttons.
+        * GPIO_D,F,G,I are connected to LEDs.
+        * GPIO_H is connected to USB Hub RESET_N.
+        * GPIO_M is connected to CLKOUT2.
+        */
+       pinctrl-0 = <&pinctrl_hog_base
+                    &pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k
+                    &pinctrl_dhcom_l
+                    &pinctrl_dhcom_int>;
+
+       pinctrl_ptn5150: ptn5150grp {
+               fsl,pins = <
+                       MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25               0x40000000
+               >;
+       };
+};
diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig
new file mode 100644 (file)
index 0000000..9966c50
--- /dev/null
@@ -0,0 +1,266 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8M=y
+CONFIG_TEXT_BASE=0x40200000
+CONFIG_SYS_MALLOC_LEN=0x1000000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0xFE0000
+CONFIG_ENV_SECT_SIZE=0x1000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8mp-dhcom-pdk3"
+CONFIG_SPL_TEXT_BASE=0x920000
+CONFIG_TARGET_IMX8MP_DH_DHCOM_PDK2=y
+CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_DM_RESET=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
+CONFIG_SPL_STACK=0x96fc00
+CONFIG_SPL=y
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_DEBUG_UART_BASE=0x30860000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_ENV_OFFSET_REDUND=0xFF0000
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
+CONFIG_SYS_LOAD_ADDR=0x50000000
+CONFIG_DEBUG_UART=y
+CONFIG_LTO=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_MONITOR_LEN=1048576
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run dh_update_env distro_bootcmd ; reset"
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="gpio clear GPIO1_11 ; sleep 0.1 ; gpio set GPIO1_11 ; sleep 0.1 ; i2c dev 4 && i2c mw 0x70 0 4 && i2c probe 0x2d && i2c mw 0x2d 0xaa55.2 0"
+CONFIG_DEFAULT_FDT_FILE="imx8mp-dhcom-pdk3.dtb"
+CONFIG_CONSOLE_MUX=y
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_ARCH_MISC_INIT=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x25000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x96fc00
+CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x4c000000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2081
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_EXPORTENV is not set
+CONFIG_CMD_ERASEENV=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_SIZE=16384
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_SHA1SUM_VERIFY=y
+CONFIG_CMD_BIND=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_LSBLK=y
+CONFIG_CMD_MBR=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_BOOTCOUNT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GETTIME=y
+CONFIG_CMD_SYSBOOT=y
+CONFIG_CMD_UUID=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_SMC=y
+CONFIG_HASH_VERIFY=y
+CONFIG_CMD_BTRFS=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
+CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
+CONFIG_MMC_SPEED_MODE_SET=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SECT_SIZE_AUTO=y
+CONFIG_ENV_SPI_MAX_HZ=80000000
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_IP_DEFRAG=y
+CONFIG_TFTP_TSIZE=y
+CONFIG_SPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_IMX8MP=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
+CONFIG_DFU_TFTP=y
+CONFIG_DFU_TIMEOUT=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_MTD=y
+CONFIG_DFU_RAM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x42800000
+CONFIG_FASTBOOT_BUF_SIZE=0x20000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_GPIO_HOG=y
+CONFIG_SPL_GPIO_HOG=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+# CONFIG_INPUT is not set
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+# CONFIG_SPI_FLASH_UNLOCK_ALL is not set
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_PHY_SMSC=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_IMX=y
+CONFIG_FEC_MXC=y
+CONFIG_RGMII=y
+CONFIG_MII=y
+CONFIG_PHY_IMX8MQ_USB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8M=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8M_POWER_DOMAIN=y
+CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PCA9450=y
+CONFIG_SPL_DM_PMIC_PCA9450=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PCA9450=y
+CONFIG_SPL_DM_REGULATOR_PCA9450=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_M41T62=y
+CONFIG_CONS_INDEX=2
+CONFIG_DM_SERIAL=y
+# CONFIG_SPL_DM_SERIAL is not set
+CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
+CONFIG_MXC_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
+CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="DH electronics"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_SDP_LOADADDR=0x0
+CONFIG_USB_FUNCTION_ACM=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_IMX_WATCHDOG=y
+CONFIG_OF_LIBFDT_OVERLAY=y