usb: ohci-at91: use descriptor-based gpio APIs correctly

The gpiod_get* function family does not want the -gpio suffix.
Use devm_gpiod_get_index_optional instead of devm_gpiod_get_optional.
The descriptor based APIs handle active high/low automatically.
The vbus-gpios are output, request enable while getting the gpio.
Don't try to get any vbus-gpios for ports outside num-ports.

WTF? Big sigh.

Fixes: 054d4b7b577d ("usb: ohci-at91: Use descriptor-based gpio APIs")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index be9e6383688111fe8d2c53d3e679758f36fd9873..414e3c376dbbd59587dc3398f4a90872a5aae19c 100644 (file)
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -43,7 +43,6 @@ struct at91_usbh_data {
        struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
        u8 ports;                               /* number of ports on root hub */
        u8 overcurrent_supported;
-       u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
        u8 overcurrent_status[AT91_MAX_USBH_PORTS];
        u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
 };
@@ -266,8 +265,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
        if (!valid_port(port))
                return;
 
-       gpiod_set_value(pdata->vbus_pin[port],
-                       pdata->vbus_pin_active_low[port] ^ enable);
+       gpiod_set_value(pdata->vbus_pin[port], enable);
 }
 
 static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
@@ -275,8 +273,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
        if (!valid_port(port))
                return -EINVAL;
 
-       return gpiod_get_value(pdata->vbus_pin[port]) ^
-              pdata->vbus_pin_active_low[port];
+       return gpiod_get_value(pdata->vbus_pin[port]);
 }
 
 /*
@@ -533,18 +530,17 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
                pdata->ports = ports;
 
        at91_for_each_port(i) {
-               pdata->vbus_pin[i] = devm_gpiod_get_optional(&pdev->dev,
-                                                            "atmel,vbus-gpio",
-                                                            GPIOD_IN);
+               if (i >= pdata->ports)
+                       break;
+
+               pdata->vbus_pin[i] =
+                       devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
+                                                     i, GPIOD_OUT_HIGH);
                if (IS_ERR(pdata->vbus_pin[i])) {
                        err = PTR_ERR(pdata->vbus_pin[i]);
                        dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
                        continue;
                }
-
-               pdata->vbus_pin_active_low[i] = gpiod_get_value(pdata->vbus_pin[i]);
-
-               ohci_at91_usb_set_power(pdata, i, 1);
        }
 
        at91_for_each_port(i) {
@@ -552,8 +548,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
                        break;
 
                pdata->overcurrent_pin[i] =
-                       devm_gpiod_get_optional(&pdev->dev,
-                                               "atmel,oc-gpio", GPIOD_IN);
+                       devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
+                                                     i, GPIOD_IN);
                if (IS_ERR(pdata->overcurrent_pin[i])) {
                        err = PTR_ERR(pdata->overcurrent_pin[i]);
                        dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);