apalis_imx6: boot env configuration updates

1. Drop legacy emmcboot wrapper from env.
2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP
3. Drop DFU defines

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>

diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 6fc7c3982c6511e770ec16c3974131169dccaf0e..38d0a6e2e90759ab0e0fbe86038f781afc7f6ce6 100644 (file)
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -93,9 +93,9 @@
 
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
-       func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \
        func(MMC, mmc, 2) \
+       func(MMC, mmc, 0) \
        func(USB, usb, 0) \
        func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
@@ -105,14 +105,6 @@
 #define BOOTENV
 #endif /* CONFIG_SPL_BUILD */
 
-#define DFU_ALT_EMMC_INFO \
-       "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
-       "boot part 0 1;" \
-       "rootfs part 0 2;" \
-       "zImage fat 0 1;" \
-       "imx6q-apalis-eval.dtb fat 0 1;" \
-       "imx6q-apalis-cam-eval.dtb fat 0 1"
-
 #define UBOOT_UPDATE \
        "uboot_hwpart=1\0" \
        "uboot_blk=8a\0" \
@@ -124,23 +116,6 @@
        "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
                "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
 
-#define EMMC_BOOTCMD \
-       "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
-               "ro,noatime rootfstype=ext4 rootwait\0" \
-       "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
-               "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
-               "${vidargs}; echo Booting from internal eMMC chip...; " \
-               "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
-               "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
-               "bootz ${kernel_addr_r} ${dtbparam}\0" \
-       "emmcbootpart=1\0" \
-       "emmcdev=0\0" \
-       "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
-               "${fdt_addr_r} ${fdt_file} && " \
-               "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
-       "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
-       "emmcrootpart=2\0"
-
 #define MEM_LAYOUT_ENV_SETTINGS \
        "bootm_size=0x20000000\0" \
        "fdt_addr_r=0x12100000\0" \
@@ -174,8 +149,6 @@
        "boot_file=zImage\0" \
        "console=ttymxc0\0" \
        "defargs=enable_wait_mode=off vmalloc=400M\0" \
-       "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
-       EMMC_BOOTCMD \
        "fdt_file=" FDT_FILE "\0" \
        "fdt_fixup=;\0" \
        MEM_LAYOUT_ENV_SETTINGS \