imx: imx8mm-beacon: Enable USB booting via SDP

In order to boot over USB, the device tree needs to enable
a few extra nodes in SPL.  Since the USB driver has the
ability to detect host/device, the dr_mode can be removed
from the device tree since it needs to act as a device when
booting and OTG is the default mode.  Add USB boot support
to spl_board_boot_device and enable the corresponding config
options.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>

diff --git a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
index c94b4ffa4c30f0f629204f0a990b7392099efc1d..00ac413f36e0606c32752ad950565879d554eca3 100644 (file)
--- a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
@@ -13,6 +13,10 @@
        };
 };
 
+&aips4 {
+       u-boot,dm-spl;
+};
+
 &reg_usdhc2_vmmc {
        u-boot,off-on-delay-us = <20000>;
 };
@@ -77,12 +81,24 @@
        u-boot,dm-spl;
 };
 
+&reg_usbotg1 {
+
+};
+
 &uart2 {
        u-boot,dm-spl;
 };
 
+&usbmisc1 {
+       u-boot,dm-spl;
+};
+
 &usbotg1 {
-       dr_mode="host";
+       u-boot,dm-spl;
+};
+
+&usbphynop1 {
+       u-boot,dm-spl;
 };
 
 &usdhc2 {

diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c
index b0e9d918da917742663b2b27432ecf25cbcdef7f..a5f337aa17c8af50495992146d5140bca2b77af1 100644 (file)
--- a/board/beacon/imx8mm/spl.c
+++ b/board/beacon/imx8mm/spl.c
@@ -34,6 +34,8 @@ int spl_board_boot_device(enum boot_device boot_dev_spl)
        case SD3_BOOT:
        case MMC3_BOOT:
                return BOOT_DEVICE_MMC2;
+       case USB_BOOT:
+               return BOOT_DEVICE_BOARD;
        default:
                return BOOT_DEVICE_NONE;
        }

diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig
index 5bbaa293ac9c7876977e5c6010a606d7e486d59b..cfb0eea99e14ddab018f397c32f352aa866d2f24 100644 (file)
--- a/configs/imx8mm_beacon_defconfig
+++ b/configs/imx8mm_beacon_defconfig
@@ -39,6 +39,9 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
+CONFIG_SPL_USB_HOST=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_MAXARGS=64
@@ -56,6 +59,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
@@ -103,6 +107,8 @@ CONFIG_PHY_ATHEROS=y
 CONFIG_PHY_GIGE=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
+CONFIG_SPL_PHY=y
+CONFIG_SPL_NOP_PHY=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
@@ -127,12 +133,13 @@ CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
 CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
+CONFIG_SDP_LOADADDR=0x40400000
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_IMX_WATCHDOG=y