+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2006,2010 Freescale Semiconductor
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#define pixis_base (u8 *)PIXIS_BASE
-
-/*
- * Simple board reset.
- */
-void pixis_reset(void)
-{
- out_8(pixis_base + PIXIS_RST, 0);
-
- while (1);
-}
-
-/*
- * Per table 27, page 58 of MPC8641HPCN spec.
- */
-static int set_px_sysclk(unsigned long sysclk)
-{
- u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux;
-
- switch (sysclk) {
- case 33:
- sysclk_s = 0x04;
- sysclk_r = 0x04;
- sysclk_v = 0x07;
- sysclk_aux = 0x00;
- break;
- case 40:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x20;
- sysclk_aux = 0x01;
- break;
- case 50:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x2A;
- sysclk_aux = 0x02;
- break;
- case 66:
- sysclk_s = 0x01;
- sysclk_r = 0x04;
- sysclk_v = 0x04;
- sysclk_aux = 0x03;
- break;
- case 83:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x4B;
- sysclk_aux = 0x04;
- break;
- case 100:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x5C;
- sysclk_aux = 0x05;
- break;
- case 134:
- sysclk_s = 0x06;
- sysclk_r = 0x1F;
- sysclk_v = 0x3B;
- sysclk_aux = 0x06;
- break;
- case 166:
- sysclk_s = 0x06;
- sysclk_r = 0x1F;
- sysclk_v = 0x4B;
- sysclk_aux = 0x07;
- break;
- default:
- printf("Unsupported SYSCLK frequency.\n");
- return 0;
- }
-
- vclkh = (sysclk_s << 5) | sysclk_r;
- vclkl = sysclk_v;
-
- out_8(pixis_base + PIXIS_VCLKH, vclkh);
- out_8(pixis_base + PIXIS_VCLKL, vclkl);
-
- out_8(pixis_base + PIXIS_AUX, sysclk_aux);
-
- return 1;
-}
-
-/* Set the CFG_SYSPLL bits
- *
- * This only has effect if PX_VCFGEN0[SYSPLL]=1, which is true if
- * read_from_px_regs() is called.
- */
-static int set_px_mpxpll(unsigned long mpxpll)
-{
- switch (mpxpll) {
- case 2:
- case 4:
- case 6:
- case 8:
- case 10:
- case 12:
- case 14:
- case 16:
- clrsetbits_8(pixis_base + PIXIS_VSPEED1, 0x1F, mpxpll);
- return 1;
- }
-
- printf("Unsupported MPXPLL ratio.\n");
- return 0;
-}
-
-static int set_px_corepll(unsigned long corepll)
-{
- u8 val;
-
- switch (corepll) {
- case 20:
- val = 0x08;
- break;
- case 25:
- val = 0x0C;
- break;
- case 30:
- val = 0x10;
- break;
- case 35:
- val = 0x1C;
- break;
- case 40:
- val = 0x14;
- break;
- case 45:
- val = 0x0E;
- break;
- default:
- printf("Unsupported COREPLL ratio.\n");
- return 0;
- }
-
- clrsetbits_8(pixis_base + PIXIS_VSPEED0, 0x1F, val);
- return 1;
-}
-
-#ifndef CFG_SYS_PIXIS_VCFGEN0_ENABLE
-#define CFG_SYS_PIXIS_VCFGEN0_ENABLE 0x1C
-#endif
-
-/* Tell the PIXIS where to find the COREPLL, MPXPLL, SYSCLK values
- *
- * The PIXIS can be programmed to look at either the on-board dip switches
- * or various other PIXIS registers to determine the values for COREPLL,
- * MPXPLL, and SYSCLK.
- *
- * CFG_SYS_PIXIS_VCFGEN0_ENABLE is the value to write to the PIXIS_VCFGEN0
- * register that tells the pixis to use the various PIXIS register.
- */
-static void read_from_px_regs(int set)
-{
- u8 tmp = in_8(pixis_base + PIXIS_VCFGEN0);
-
- if (set)
- tmp = tmp | CFG_SYS_PIXIS_VCFGEN0_ENABLE;
- else
- tmp = tmp & ~CFG_SYS_PIXIS_VCFGEN0_ENABLE;
-
- out_8(pixis_base + PIXIS_VCFGEN0, tmp);
-}
-
-/* CFG_SYS_PIXIS_VBOOT_ENABLE is the value to write to the PX_VCFGEN1
- * register that tells the pixis to use the PX_VBOOT[LBMAP] register.
- */
-#ifndef CFG_SYS_PIXIS_VBOOT_ENABLE
-#define CFG_SYS_PIXIS_VBOOT_ENABLE 0x04
-#endif
-
-/* Configure the source of the boot location
- *
- * The PIXIS can be programmed to look at either the on-board dip switches
- * or the PX_VBOOT[LBMAP] register to determine where we should boot.
- *
- * If we want to boot from the alternate boot bank, we need to tell the PIXIS
- * to ignore the on-board dip switches and use the PX_VBOOT[LBMAP] instead.
- */
-static void read_from_px_regs_altbank(int set)
-{
- u8 tmp = in_8(pixis_base + PIXIS_VCFGEN1);
-
- if (set)
- tmp = tmp | CFG_SYS_PIXIS_VBOOT_ENABLE;
- else
- tmp = tmp & ~CFG_SYS_PIXIS_VBOOT_ENABLE;
-
- out_8(pixis_base + PIXIS_VCFGEN1, tmp);
-}
-
-/* CFG_SYS_PIXIS_VBOOT_MASK contains the bits to set in VBOOT register that
- * tells the PIXIS what the alternate flash bank is.
- *
- * Note that it's not really a mask. It contains the actual LBMAP bits that
- * must be set to select the alternate bank. This code assumes that the
- * primary bank has these bits set to 0, and the alternate bank has these
- * bits set to 1.
- */
-#ifndef CFG_SYS_PIXIS_VBOOT_MASK
-#define CFG_SYS_PIXIS_VBOOT_MASK (0x40)
-#endif
-
-/* Tell the PIXIS to boot from the default flash bank
- *
- * Program the default flash bank into the VBOOT register. This register is
- * used only if PX_VCFGEN1[FLASH]=1.
- */
-static void clear_altbank(void)
-{
- clrbits_8(pixis_base + PIXIS_VBOOT, CFG_SYS_PIXIS_VBOOT_MASK);
-}
-
-/* Tell the PIXIS to boot from the alternate flash bank
- *
- * Program the alternate flash bank into the VBOOT register. This register is
- * used only if PX_VCFGEN1[FLASH]=1.
- */
-static void set_altbank(void)
-{
- setbits_8(pixis_base + PIXIS_VBOOT, CFG_SYS_PIXIS_VBOOT_MASK);
-}
-
-/* Reset the board with watchdog disabled.
- *
- * This respects the altbank setting.
- */
-static void set_px_go(void)
-{
- /* Disable the VELA sequencer and watchdog */
- clrbits_8(pixis_base + PIXIS_VCTL, 9);
-
- /* Reboot by starting the VELA sequencer */
- setbits_8(pixis_base + PIXIS_VCTL, 0x1);
-
- while (1);
-}
-
-/* Reset the board with watchdog enabled.
- *
- * This respects the altbank setting.
- */
-static void set_px_go_with_watchdog(void)
-{
- /* Disable the VELA sequencer */
- clrbits_8(pixis_base + PIXIS_VCTL, 1);
-
- /* Enable the watchdog and reboot by starting the VELA sequencer */
- setbits_8(pixis_base + PIXIS_VCTL, 0x9);
-
- while (1);
-}
-
-/* Disable the watchdog
- *
- */
-static int pixis_disable_watchdog_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
- char *const argv[])
-{
- /* Disable the VELA sequencer and the watchdog */
- clrbits_8(pixis_base + PIXIS_VCTL, 9);
-
- return 0;
-}
-
-U_BOOT_CMD(
- diswd, 1, 0, pixis_disable_watchdog_cmd,
- "Disable watchdog timer",
- ""
-);
-
-/*
- * This function takes the non-integral cpu:mpx pll ratio
- * and converts it to an integer that can be used to assign
- * FPGA register values.
- * input: strptr i.e. argv[2]
- */
-static unsigned long strfractoint(char *strptr)
-{
- int i, j;
- int mulconst;
- int no_dec = 0;
- unsigned long intval = 0, decval = 0;
- char intarr[3], decarr[3];
-
- /* Assign the integer part to intarr[]
- * If there is no decimal point i.e.
- * if the ratio is an integral value
- * simply create the intarr.
- */
- i = 0;
- while (strptr[i] != '.') {
- if (strptr[i] == 0) {
- no_dec = 1;
- break;
- }
- intarr[i] = strptr[i];
- i++;
- }
-
- intarr[i] = '\0';
-
- if (no_dec) {
- /* Currently needed only for single digit corepll ratios */
- mulconst = 10;
- decval = 0;
- } else {
- j = 0;
- i++; /* Skipping the decimal point */
- while ((strptr[i] >= '0') && (strptr[i] <= '9')) {
- decarr[j] = strptr[i];
- i++;
- j++;
- }
-
- decarr[j] = '\0';
-
- mulconst = 1;
- for (i = 0; i < j; i++)
- mulconst *= 10;
- decval = dectoul(decarr, NULL);
- }
-
- intval = dectoul(intarr, NULL);
- intval = intval * mulconst;
-
- return intval + decval;
-}
-
-static int pixis_reset_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
- char *const argv[])
-{
- unsigned int i;
- char *p_cf = NULL;
- char *p_cf_sysclk = NULL;
- char *p_cf_corepll = NULL;
- char *p_cf_mpxpll = NULL;
- char *p_altbank = NULL;
- char *p_wd = NULL;
- int unknown_param = 0;
-
- /*
- * No args is a simple reset request.
- */
- if (argc <= 1) {
- pixis_reset();
- /* not reached */
- }
-
- for (i = 1; i < argc; i++) {
- if (strcmp(argv[i], "cf") == 0) {
- p_cf = argv[i];
- if (i + 3 >= argc) {
- break;
- }
- p_cf_sysclk = argv[i+1];
- p_cf_corepll = argv[i+2];
- p_cf_mpxpll = argv[i+3];
- i += 3;
- continue;
- }
-
- if (strcmp(argv[i], "altbank") == 0) {
- p_altbank = argv[i];
- continue;
- }
-
- if (strcmp(argv[i], "wd") == 0) {
- p_wd = argv[i];
- continue;
- }
-
- unknown_param = 1;
- }
-
- /*
- * Check that cf has all required parms
- */
- if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll))
- || unknown_param) {
-#ifdef CONFIG_SYS_LONGHELP
- puts(cmdtp->help);
- putc('\n');
-#endif
- return 1;
- }
-
- /*
- * PIXIS seems to be sensitive to the ordering of
- * the registers that are touched.
- */
- read_from_px_regs(0);
-
- if (p_altbank)
- read_from_px_regs_altbank(0);
-
- clear_altbank();
-
- /*
- * Clock configuration specified.
- */
- if (p_cf) {
- unsigned long sysclk;
- unsigned long corepll;
- unsigned long mpxpll;
-
- sysclk = dectoul(p_cf_sysclk, NULL);
- corepll = strfractoint(p_cf_corepll);
- mpxpll = dectoul(p_cf_mpxpll, NULL);
-
- if (!(set_px_sysclk(sysclk)
- && set_px_corepll(corepll)
- && set_px_mpxpll(mpxpll))) {
-#ifdef CONFIG_SYS_LONGHELP
- puts(cmdtp->help);
- putc('\n');
-#endif
- return 1;
- }
- read_from_px_regs(1);
- }
-
- /*
- * Altbank specified
- *
- * NOTE CHANGE IN BEHAVIOR: previous code would default
- * to enabling watchdog if altbank is specified.
- * Now the watchdog must be enabled explicitly using 'wd'.
- */
- if (p_altbank) {
- set_altbank();
- read_from_px_regs_altbank(1);
- }
-
- /*
- * Reset with watchdog specified.
- */
- if (p_wd)
- set_px_go_with_watchdog();
- else
- set_px_go();
-
- /*
- * Shouldn't be reached.
- */
- return 0;
-}
-
-
-U_BOOT_CMD(
- pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
- "Reset the board using the FPGA sequencer",
- " pixis_reset\n"
- " pixis_reset [altbank]\n"
- " pixis_reset altbank wd\n"
- " pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
- " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>"
-);