#include <linux/memblock.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/cpumask.h>
#include <asm/cpu_entry_area.h>
#include <asm/stacktrace.h>
#include <asm/svm.h>
#include <asm/smp.h>
#include <asm/cpu.h>
+#include <asm/apic.h>
#define DR7_RESET_VALUE 0x400
+/* AP INIT values as documented in the APM2 section "Processor Initialization State" */
+#define AP_INIT_CS_LIMIT 0xffff
+#define AP_INIT_DS_LIMIT 0xffff
+#define AP_INIT_LDTR_LIMIT 0xffff
+#define AP_INIT_GDTR_LIMIT 0xffff
+#define AP_INIT_IDTR_LIMIT 0xffff
+#define AP_INIT_TR_LIMIT 0xffff
+#define AP_INIT_RFLAGS_DEFAULT 0x2
+#define AP_INIT_DR6_DEFAULT 0xffff0ff0
+#define AP_INIT_GPAT_DEFAULT 0x0007040600070406ULL
+#define AP_INIT_XCR0_DEFAULT 0x1
+#define AP_INIT_X87_FTW_DEFAULT 0x5555
+#define AP_INIT_X87_FCW_DEFAULT 0x0040
+#define AP_INIT_CR0_DEFAULT 0x60000010
+#define AP_INIT_MXCSR_DEFAULT 0x1f80
+
/* For early boot hypervisor communication in SEV-ES enabled guests */
static struct ghcb boot_ghcb_page __bss_decrypted __aligned(PAGE_SIZE);
static DEFINE_PER_CPU(struct sev_es_runtime_data*, runtime_data);
DEFINE_STATIC_KEY_FALSE(sev_es_enable_key);
+static DEFINE_PER_CPU(struct sev_es_save_area *, sev_vmsa);
+
static __always_inline bool on_vc_stack(struct pt_regs *regs)
{
unsigned long sp = regs->sp;
pvalidate_pages(vaddr, npages, true);
}
+static int snp_set_vmsa(void *va, bool vmsa)
+{
+ u64 attrs;
+
+ /*
+ * Running at VMPL0 allows the kernel to change the VMSA bit for a page
+ * using the RMPADJUST instruction. However, for the instruction to
+ * succeed it must target the permissions of a lesser privileged
+ * (higher numbered) VMPL level, so use VMPL1 (refer to the RMPADJUST
+ * instruction in the AMD64 APM Volume 3).
+ */
+ attrs = 1;
+ if (vmsa)
+ attrs |= RMPADJUST_VMSA_PAGE_BIT;
+
+ return rmpadjust((unsigned long)va, RMP_PG_SIZE_4K, attrs);
+}
+
+#define __ATTR_BASE (SVM_SELECTOR_P_MASK | SVM_SELECTOR_S_MASK)
+#define INIT_CS_ATTRIBS (__ATTR_BASE | SVM_SELECTOR_READ_MASK | SVM_SELECTOR_CODE_MASK)
+#define INIT_DS_ATTRIBS (__ATTR_BASE | SVM_SELECTOR_WRITE_MASK)
+
+#define INIT_LDTR_ATTRIBS (SVM_SELECTOR_P_MASK | 2)
+#define INIT_TR_ATTRIBS (SVM_SELECTOR_P_MASK | 3)
+
+static void *snp_alloc_vmsa_page(void)
+{
+ struct page *p;
+
+ /*
+ * Allocate VMSA page to work around the SNP erratum where the CPU will
+ * incorrectly signal an RMP violation #PF if a large page (2MB or 1GB)
+ * collides with the RMP entry of VMSA page. The recommended workaround
+ * is to not use a large page.
+ *
+ * Allocate an 8k page which is also 8k-aligned.
+ */
+ p = alloc_pages(GFP_KERNEL_ACCOUNT | __GFP_ZERO, 1);
+ if (!p)
+ return NULL;
+
+ split_page(p, 1);
+
+ /* Free the first 4k. This page may be 2M/1G aligned and cannot be used. */
+ __free_page(p);
+
+ return page_address(p + 1);
+}
+
+static void snp_cleanup_vmsa(struct sev_es_save_area *vmsa)
+{
+ int err;
+
+ err = snp_set_vmsa(vmsa, false);
+ if (err)
+ pr_err("clear VMSA page failed (%u), leaking page\n", err);
+ else
+ free_page((unsigned long)vmsa);
+}
+
+static int wakeup_cpu_via_vmgexit(int apic_id, unsigned long start_ip)
+{
+ struct sev_es_save_area *cur_vmsa, *vmsa;
+ struct ghcb_state state;
+ unsigned long flags;
+ struct ghcb *ghcb;
+ u8 sipi_vector;
+ int cpu, ret;
+ u64 cr4;
+
+ /*
+ * The hypervisor SNP feature support check has happened earlier, just check
+ * the AP_CREATION one here.
+ */
+ if (!(sev_hv_features & GHCB_HV_FT_SNP_AP_CREATION))
+ return -EOPNOTSUPP;
+
+ /*
+ * Verify the desired start IP against the known trampoline start IP
+ * to catch any future new trampolines that may be introduced that
+ * would require a new protected guest entry point.
+ */
+ if (WARN_ONCE(start_ip != real_mode_header->trampoline_start,
+ "Unsupported SNP start_ip: %lx\n", start_ip))
+ return -EINVAL;
+
+ /* Override start_ip with known protected guest start IP */
+ start_ip = real_mode_header->sev_es_trampoline_start;
+
+ /* Find the logical CPU for the APIC ID */
+ for_each_present_cpu(cpu) {
+ if (arch_match_cpu_phys_id(cpu, apic_id))
+ break;
+ }
+ if (cpu >= nr_cpu_ids)
+ return -EINVAL;
+
+ cur_vmsa = per_cpu(sev_vmsa, cpu);
+
+ /*
+ * A new VMSA is created each time because there is no guarantee that
+ * the current VMSA is the kernels or that the vCPU is not running. If
+ * an attempt was done to use the current VMSA with a running vCPU, a
+ * #VMEXIT of that vCPU would wipe out all of the settings being done
+ * here.
+ */
+ vmsa = (struct sev_es_save_area *)snp_alloc_vmsa_page();
+ if (!vmsa)
+ return -ENOMEM;
+
+ /* CR4 should maintain the MCE value */
+ cr4 = native_read_cr4() & X86_CR4_MCE;
+
+ /* Set the CS value based on the start_ip converted to a SIPI vector */
+ sipi_vector = (start_ip >> 12);
+ vmsa->cs.base = sipi_vector << 12;
+ vmsa->cs.limit = AP_INIT_CS_LIMIT;
+ vmsa->cs.attrib = INIT_CS_ATTRIBS;
+ vmsa->cs.selector = sipi_vector << 8;
+
+ /* Set the RIP value based on start_ip */
+ vmsa->rip = start_ip & 0xfff;
+
+ /* Set AP INIT defaults as documented in the APM */
+ vmsa->ds.limit = AP_INIT_DS_LIMIT;
+ vmsa->ds.attrib = INIT_DS_ATTRIBS;
+ vmsa->es = vmsa->ds;
+ vmsa->fs = vmsa->ds;
+ vmsa->gs = vmsa->ds;
+ vmsa->ss = vmsa->ds;
+
+ vmsa->gdtr.limit = AP_INIT_GDTR_LIMIT;
+ vmsa->ldtr.limit = AP_INIT_LDTR_LIMIT;
+ vmsa->ldtr.attrib = INIT_LDTR_ATTRIBS;
+ vmsa->idtr.limit = AP_INIT_IDTR_LIMIT;
+ vmsa->tr.limit = AP_INIT_TR_LIMIT;
+ vmsa->tr.attrib = INIT_TR_ATTRIBS;
+
+ vmsa->cr4 = cr4;
+ vmsa->cr0 = AP_INIT_CR0_DEFAULT;
+ vmsa->dr7 = DR7_RESET_VALUE;
+ vmsa->dr6 = AP_INIT_DR6_DEFAULT;
+ vmsa->rflags = AP_INIT_RFLAGS_DEFAULT;
+ vmsa->g_pat = AP_INIT_GPAT_DEFAULT;
+ vmsa->xcr0 = AP_INIT_XCR0_DEFAULT;
+ vmsa->mxcsr = AP_INIT_MXCSR_DEFAULT;
+ vmsa->x87_ftw = AP_INIT_X87_FTW_DEFAULT;
+ vmsa->x87_fcw = AP_INIT_X87_FCW_DEFAULT;
+
+ /* SVME must be set. */
+ vmsa->efer = EFER_SVME;
+
+ /*
+ * Set the SNP-specific fields for this VMSA:
+ * VMPL level
+ * SEV_FEATURES (matches the SEV STATUS MSR right shifted 2 bits)
+ */
+ vmsa->vmpl = 0;
+ vmsa->sev_features = sev_status >> 2;
+
+ /* Switch the page over to a VMSA page now that it is initialized */
+ ret = snp_set_vmsa(vmsa, true);
+ if (ret) {
+ pr_err("set VMSA page failed (%u)\n", ret);
+ free_page((unsigned long)vmsa);
+
+ return -EINVAL;
+ }
+
+ /* Issue VMGEXIT AP Creation NAE event */
+ local_irq_save(flags);
+
+ ghcb = __sev_get_ghcb(&state);
+
+ vc_ghcb_invalidate(ghcb);
+ ghcb_set_rax(ghcb, vmsa->sev_features);
+ ghcb_set_sw_exit_code(ghcb, SVM_VMGEXIT_AP_CREATION);
+ ghcb_set_sw_exit_info_1(ghcb, ((u64)apic_id << 32) | SVM_VMGEXIT_AP_CREATE);
+ ghcb_set_sw_exit_info_2(ghcb, __pa(vmsa));
+
+ sev_es_wr_ghcb_msr(__pa(ghcb));
+ VMGEXIT();
+
+ if (!ghcb_sw_exit_info_1_is_valid(ghcb) ||
+ lower_32_bits(ghcb->save.sw_exit_info_1)) {
+ pr_err("SNP AP Creation error\n");
+ ret = -EINVAL;
+ }
+
+ __sev_put_ghcb(&state);
+
+ local_irq_restore(flags);
+
+ /* Perform cleanup if there was an error */
+ if (ret) {
+ snp_cleanup_vmsa(vmsa);
+ vmsa = NULL;
+ }
+
+ /* Free up any previous VMSA page */
+ if (cur_vmsa)
+ snp_cleanup_vmsa(cur_vmsa);
+
+ /* Record the current VMSA page */
+ per_cpu(sev_vmsa, cpu) = vmsa;
+
+ return ret;
+}
+
+void snp_set_wakeup_secondary_cpu(void)
+{
+ if (!cc_platform_has(CC_ATTR_GUEST_SEV_SNP))
+ return;
+
+ /*
+ * Always set this override if SNP is enabled. This makes it the
+ * required method to start APs under SNP. If the hypervisor does
+ * not support AP creation, then no APs will be started.
+ */
+ apic->wakeup_secondary_cpu = wakeup_cpu_via_vmgexit;
+}
+
int sev_es_setup_ap_jump_table(struct real_mode_header *rmh)
{
u16 startup_cs, startup_ip;
projects / kernel.git / commitdiff