]> git.baikalelectronics.ru Git - uboot.git/commitdiff
firmware: ti_sci: Add support for processor control services
authorLokesh Vutla <lokeshvutla@ti.com>
Mon, 27 Aug 2018 10:27:37 +0000 (15:57 +0530)
committerTom Rini <trini@konsulko.com>
Tue, 11 Sep 2018 12:32:55 +0000 (08:32 -0400)
TI-SCI message protocol provides support for controlling of various
physical cores available in SoC. In order to control which host is
capable of controlling a physical processor core, there is a processor
access control list that needs to be populated as part of the board
configuration data.

Introduce support for the set of TI-SCI message protocol apis that
provide us with this capability of controlling physical cores.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
drivers/firmware/ti_sci.c
drivers/firmware/ti_sci.h
include/linux/soc/ti/ti_sci_protocol.h

index 1a78b7d0dc4f83458f9e2c0b59ce781a384abcc4..91481260411aa5a0b7f13ad823089f98a1da2236 100644 (file)
@@ -1441,6 +1441,368 @@ static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle)
        return ret;
 }
 
+/**
+ * ti_sci_cmd_proc_request() - Command to request a physical processor control
+ * @handle:    Pointer to TI SCI handle
+ * @proc_id:   Processor ID this request is for
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_request(const struct ti_sci_handle *handle,
+                                  u8 proc_id)
+{
+       struct ti_sci_msg_req_proc_request req;
+       struct ti_sci_msg_hdr *resp;
+       struct ti_sci_info *info;
+       struct ti_sci_xfer *xfer;
+       int ret = 0;
+
+       if (IS_ERR(handle))
+               return PTR_ERR(handle);
+       if (!handle)
+               return -EINVAL;
+
+       info = handle_to_ti_sci_info(handle);
+
+       xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_REQUEST,
+                                    TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+                                    (u32 *)&req, sizeof(req), sizeof(*resp));
+       if (IS_ERR(xfer)) {
+               ret = PTR_ERR(xfer);
+               dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+               return ret;
+       }
+       req.processor_id = proc_id;
+
+       ret = ti_sci_do_xfer(info, xfer);
+       if (ret) {
+               dev_err(info->dev, "Mbox send fail %d\n", ret);
+               return ret;
+       }
+
+       resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+       if (!ti_sci_is_response_ack(resp))
+               ret = -ENODEV;
+
+       return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_release() - Command to release a physical processor control
+ * @handle:    Pointer to TI SCI handle
+ * @proc_id:   Processor ID this request is for
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_release(const struct ti_sci_handle *handle,
+                                  u8 proc_id)
+{
+       struct ti_sci_msg_req_proc_release req;
+       struct ti_sci_msg_hdr *resp;
+       struct ti_sci_info *info;
+       struct ti_sci_xfer *xfer;
+       int ret = 0;
+
+       if (IS_ERR(handle))
+               return PTR_ERR(handle);
+       if (!handle)
+               return -EINVAL;
+
+       info = handle_to_ti_sci_info(handle);
+
+       xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_RELEASE,
+                                    TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+                                    (u32 *)&req, sizeof(req), sizeof(*resp));
+       if (IS_ERR(xfer)) {
+               ret = PTR_ERR(xfer);
+               dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+               return ret;
+       }
+       req.processor_id = proc_id;
+
+       ret = ti_sci_do_xfer(info, xfer);
+       if (ret) {
+               dev_err(info->dev, "Mbox send fail %d\n", ret);
+               return ret;
+       }
+
+       resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+       if (!ti_sci_is_response_ack(resp))
+               ret = -ENODEV;
+
+       return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_handover() - Command to handover a physical processor
+ *                             control to a host in the processor's access
+ *                             control list.
+ * @handle:    Pointer to TI SCI handle
+ * @proc_id:   Processor ID this request is for
+ * @host_id:   Host ID to get the control of the processor
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_handover(const struct ti_sci_handle *handle,
+                                   u8 proc_id, u8 host_id)
+{
+       struct ti_sci_msg_req_proc_handover req;
+       struct ti_sci_msg_hdr *resp;
+       struct ti_sci_info *info;
+       struct ti_sci_xfer *xfer;
+       int ret = 0;
+
+       if (IS_ERR(handle))
+               return PTR_ERR(handle);
+       if (!handle)
+               return -EINVAL;
+
+       info = handle_to_ti_sci_info(handle);
+
+       xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_HANDOVER,
+                                    TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+                                    (u32 *)&req, sizeof(req), sizeof(*resp));
+       if (IS_ERR(xfer)) {
+               ret = PTR_ERR(xfer);
+               dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+               return ret;
+       }
+       req.processor_id = proc_id;
+       req.host_id = host_id;
+
+       ret = ti_sci_do_xfer(info, xfer);
+       if (ret) {
+               dev_err(info->dev, "Mbox send fail %d\n", ret);
+               return ret;
+       }
+
+       resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+       if (!ti_sci_is_response_ack(resp))
+               ret = -ENODEV;
+
+       return ret;
+}
+
+/**
+ * ti_sci_cmd_set_proc_boot_cfg() - Command to set the processor boot
+ *                                 configuration flags
+ * @handle:            Pointer to TI SCI handle
+ * @proc_id:           Processor ID this request is for
+ * @config_flags_set:  Configuration flags to be set
+ * @config_flags_clear:        Configuration flags to be cleared.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_set_proc_boot_cfg(const struct ti_sci_handle *handle,
+                                       u8 proc_id, u64 bootvector,
+                                       u32 config_flags_set,
+                                       u32 config_flags_clear)
+{
+       struct ti_sci_msg_req_set_proc_boot_config req;
+       struct ti_sci_msg_hdr *resp;
+       struct ti_sci_info *info;
+       struct ti_sci_xfer *xfer;
+       int ret = 0;
+
+       if (IS_ERR(handle))
+               return PTR_ERR(handle);
+       if (!handle)
+               return -EINVAL;
+
+       info = handle_to_ti_sci_info(handle);
+
+       xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_SET_PROC_BOOT_CONFIG,
+                                    TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+                                    (u32 *)&req, sizeof(req), sizeof(*resp));
+       if (IS_ERR(xfer)) {
+               ret = PTR_ERR(xfer);
+               dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+               return ret;
+       }
+       req.processor_id = proc_id;
+       req.bootvector_low = bootvector & TISCI_ADDR_LOW_MASK;
+       req.bootvector_high = (bootvector & TISCI_ADDR_HIGH_MASK) >>
+                               TISCI_ADDR_HIGH_SHIFT;
+       req.config_flags_set = config_flags_set;
+       req.config_flags_clear = config_flags_clear;
+
+       ret = ti_sci_do_xfer(info, xfer);
+       if (ret) {
+               dev_err(info->dev, "Mbox send fail %d\n", ret);
+               return ret;
+       }
+
+       resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+       if (!ti_sci_is_response_ack(resp))
+               ret = -ENODEV;
+
+       return ret;
+}
+
+/**
+ * ti_sci_cmd_set_proc_boot_ctrl() - Command to set the processor boot
+ *                                  control flags
+ * @handle:                    Pointer to TI SCI handle
+ * @proc_id:                   Processor ID this request is for
+ * @control_flags_set:         Control flags to be set
+ * @control_flags_clear:       Control flags to be cleared
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_set_proc_boot_ctrl(const struct ti_sci_handle *handle,
+                                        u8 proc_id, u32 control_flags_set,
+                                        u32 control_flags_clear)
+{
+       struct ti_sci_msg_req_set_proc_boot_ctrl req;
+       struct ti_sci_msg_hdr *resp;
+       struct ti_sci_info *info;
+       struct ti_sci_xfer *xfer;
+       int ret = 0;
+
+       if (IS_ERR(handle))
+               return PTR_ERR(handle);
+       if (!handle)
+               return -EINVAL;
+
+       info = handle_to_ti_sci_info(handle);
+
+       xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_SET_PROC_BOOT_CTRL,
+                                    TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+                                    (u32 *)&req, sizeof(req), sizeof(*resp));
+       if (IS_ERR(xfer)) {
+               ret = PTR_ERR(xfer);
+               dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+               return ret;
+       }
+       req.processor_id = proc_id;
+       req.control_flags_set = control_flags_set;
+       req.control_flags_clear = control_flags_clear;
+
+       ret = ti_sci_do_xfer(info, xfer);
+       if (ret) {
+               dev_err(info->dev, "Mbox send fail %d\n", ret);
+               return ret;
+       }
+
+       resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+       if (!ti_sci_is_response_ack(resp))
+               ret = -ENODEV;
+
+       return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_auth_boot_image() - Command to authenticate and load the
+ *                     image and then set the processor configuration flags.
+ * @handle:    Pointer to TI SCI handle
+ * @proc_id:   Processor ID this request is for
+ * @cert_addr: Memory address at which payload image certificate is located.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_auth_boot_image(const struct ti_sci_handle *handle,
+                                          u8 proc_id, u64 cert_addr)
+{
+       struct ti_sci_msg_req_proc_auth_boot_image req;
+       struct ti_sci_msg_hdr *resp;
+       struct ti_sci_info *info;
+       struct ti_sci_xfer *xfer;
+       int ret = 0;
+
+       if (IS_ERR(handle))
+               return PTR_ERR(handle);
+       if (!handle)
+               return -EINVAL;
+
+       info = handle_to_ti_sci_info(handle);
+
+       xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_AUTH_BOOT_IMIAGE,
+                                    TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+                                    (u32 *)&req, sizeof(req), sizeof(*resp));
+       if (IS_ERR(xfer)) {
+               ret = PTR_ERR(xfer);
+               dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+               return ret;
+       }
+       req.processor_id = proc_id;
+       req.cert_addr_low = cert_addr & TISCI_ADDR_LOW_MASK;
+       req.cert_addr_high = (cert_addr & TISCI_ADDR_HIGH_MASK) >>
+                               TISCI_ADDR_HIGH_SHIFT;
+
+       ret = ti_sci_do_xfer(info, xfer);
+       if (ret) {
+               dev_err(info->dev, "Mbox send fail %d\n", ret);
+               return ret;
+       }
+
+       resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+       if (!ti_sci_is_response_ack(resp))
+               ret = -ENODEV;
+
+       return ret;
+}
+
+/**
+ * ti_sci_cmd_get_proc_boot_status() - Command to get the processor boot status
+ * @handle:    Pointer to TI SCI handle
+ * @proc_id:   Processor ID this request is for
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_get_proc_boot_status(const struct ti_sci_handle *handle,
+                                          u8 proc_id, u64 *bv, u32 *cfg_flags,
+                                          u32 *ctrl_flags, u32 *sts_flags)
+{
+       struct ti_sci_msg_resp_get_proc_boot_status *resp;
+       struct ti_sci_msg_req_get_proc_boot_status req;
+       struct ti_sci_info *info;
+       struct ti_sci_xfer *xfer;
+       int ret = 0;
+
+       if (IS_ERR(handle))
+               return PTR_ERR(handle);
+       if (!handle)
+               return -EINVAL;
+
+       info = handle_to_ti_sci_info(handle);
+
+       xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_GET_PROC_BOOT_STATUS,
+                                    TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+                                    (u32 *)&req, sizeof(req), sizeof(*resp));
+       if (IS_ERR(xfer)) {
+               ret = PTR_ERR(xfer);
+               dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+               return ret;
+       }
+       req.processor_id = proc_id;
+
+       ret = ti_sci_do_xfer(info, xfer);
+       if (ret) {
+               dev_err(info->dev, "Mbox send fail %d\n", ret);
+               return ret;
+       }
+
+       resp = (struct ti_sci_msg_resp_get_proc_boot_status *)
+                                                       xfer->tx_message.buf;
+
+       if (!ti_sci_is_response_ack(resp))
+               return -ENODEV;
+       *bv = (resp->bootvector_low & TISCI_ADDR_LOW_MASK) |
+                       (((u64)resp->bootvector_high  <<
+                         TISCI_ADDR_HIGH_SHIFT) & TISCI_ADDR_HIGH_MASK);
+       *cfg_flags = resp->config_flags;
+       *ctrl_flags = resp->control_flags;
+       *sts_flags = resp->status_flags;
+
+       return ret;
+}
+
 /*
  * ti_sci_setup_ops() - Setup the operations structures
  * @info:      pointer to TISCI pointer
@@ -1452,6 +1814,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
        struct ti_sci_dev_ops *dops = &ops->dev_ops;
        struct ti_sci_clk_ops *cops = &ops->clk_ops;
        struct ti_sci_core_ops *core_ops = &ops->core_ops;
+       struct ti_sci_proc_ops *pops = &ops->proc_ops;
 
        bops->board_config = ti_sci_cmd_set_board_config;
        bops->board_config_rm = ti_sci_cmd_set_board_config_rm;
@@ -1486,6 +1849,14 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
        cops->get_freq = ti_sci_cmd_clk_get_freq;
 
        core_ops->reboot_device = ti_sci_cmd_core_reboot;
+
+       pops->proc_request = ti_sci_cmd_proc_request;
+       pops->proc_release = ti_sci_cmd_proc_release;
+       pops->proc_handover = ti_sci_cmd_proc_handover;
+       pops->set_proc_boot_cfg = ti_sci_cmd_set_proc_boot_cfg;
+       pops->set_proc_boot_ctrl = ti_sci_cmd_set_proc_boot_ctrl;
+       pops->proc_auth_boot_image = ti_sci_cmd_proc_auth_boot_image;
+       pops->get_proc_boot_status = ti_sci_cmd_get_proc_boot_status;
 }
 
 /**
index 2fc9063ff52e8993261682040df1c0620504338b..81591fb0c71f784094ce6e31d694e2ba1eeffce9 100644 (file)
 #define TI_SCI_MSG_QUERY_CLOCK_FREQ    0x010d
 #define TI_SCI_MSG_GET_CLOCK_FREQ      0x010e
 
+/* Processor Control Messages */
+#define TISCI_MSG_PROC_REQUEST         0xc000
+#define TISCI_MSG_PROC_RELEASE         0xc001
+#define TISCI_MSG_PROC_HANDOVER                0xc005
+#define TISCI_MSG_SET_PROC_BOOT_CONFIG 0xc100
+#define TISCI_MSG_SET_PROC_BOOT_CTRL   0xc101
+#define TISCI_MSG_PROC_AUTH_BOOT_IMIAGE        0xc120
+#define TISCI_MSG_GET_PROC_BOOT_STATUS 0xc400
+
 /**
  * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
  * @type:      Type of messages: One of TI_SCI_MSG* values
@@ -496,4 +505,176 @@ struct ti_sci_msg_resp_get_clock_freq {
        u64 freq_hz;
 } __packed;
 
+#define TISCI_ADDR_LOW_MASK            GENMASK_ULL(31, 0)
+#define TISCI_ADDR_HIGH_MASK           GENMASK_ULL(63, 32)
+#define TISCI_ADDR_HIGH_SHIFT          32
+
+/**
+ * struct ti_sci_msg_req_proc_request - Request a processor
+ *
+ * @hdr:               Generic Header
+ * @processor_id:      ID of processor
+ *
+ * Request type is TISCI_MSG_PROC_REQUEST, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_request {
+       struct ti_sci_msg_hdr hdr;
+       u8 processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_release - Release a processor
+ *
+ * @hdr:               Generic Header
+ * @processor_id:      ID of processor
+ *
+ * Request type is TISCI_MSG_PROC_RELEASE, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_release {
+       struct ti_sci_msg_hdr hdr;
+       u8 processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_handover - Handover a processor to a host
+ *
+ * @hdr:               Generic Header
+ * @processor_id:      ID of processor
+ * @host_id:           New Host we want to give control to
+ *
+ * Request type is TISCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_handover {
+       struct ti_sci_msg_hdr hdr;
+       u8 processor_id;
+       u8 host_id;
+} __packed;
+
+/* A53 Config Flags */
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_EN         0x00000001
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_NIDEN      0x00000002
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPIDEN     0x00000004
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPNIDEN    0x00000008
+#define PROC_BOOT_CFG_FLAG_ARMV8_AARCH32        0x00000100
+
+/* R5 Config Flags */
+#define PROC_BOOT_CFG_FLAG_R5_DBG_EN            0x00000001
+#define PROC_BOOT_CFG_FLAG_R5_DBG_NIDEN         0x00000002
+#define PROC_BOOT_CFG_FLAG_R5_LOCKSTEP          0x00000100
+#define PROC_BOOT_CFG_FLAG_R5_TEINIT            0x00000200
+#define PROC_BOOT_CFG_FLAG_R5_NMFI_EN           0x00000400
+#define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE       0x00000800
+#define PROC_BOOT_CFG_FLAG_R5_BTCM_EN           0x00001000
+#define PROC_BOOT_CFG_FLAG_R5_ATCM_EN           0x00002000
+
+/**
+ * struct ti_sci_msg_req_set_proc_boot_config - Set Processor boot configuration
+ * @hdr:               Generic Header
+ * @processor_id:      ID of processor
+ * @bootvector_low:    Lower 32bit (Little Endian) of boot vector
+ * @bootvector_high:   Higher 32bit (Little Endian) of boot vector
+ * @config_flags_set:  Optional Processor specific Config Flags to set.
+ *                     Setting a bit here implies required bit sets to 1.
+ * @config_flags_clear:        Optional Processor specific Config Flags to clear.
+ *                     Setting a bit here implies required bit gets cleared.
+ *
+ * Request type is TISCI_MSG_SET_PROC_BOOT_CONFIG, response is a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_proc_boot_config {
+       struct ti_sci_msg_hdr hdr;
+       u8 processor_id;
+       u32 bootvector_low;
+       u32 bootvector_high;
+       u32 config_flags_set;
+       u32 config_flags_clear;
+} __packed;
+
+/* R5 Control Flags */
+#define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT                0x00000001
+
+/**
+ * struct ti_sci_msg_req_set_proc_boot_ctrl - Set Processor boot control flags
+ * @hdr:               Generic Header
+ * @processor_id:      ID of processor
+ * @control_flags_set: Optional Processor specific Control Flags to set.
+ *                     Setting a bit here implies required bit sets to 1.
+ * @control_flags_clear:Optional Processor specific Control Flags to clear.
+ *                     Setting a bit here implies required bit gets cleared.
+ *
+ * Request type is TISCI_MSG_SET_PROC_BOOT_CTRL, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_proc_boot_ctrl {
+       struct ti_sci_msg_hdr hdr;
+       u8 processor_id;
+       u32 control_flags_set;
+       u32 control_flags_clear;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_auth_start_image - Authenticate and start image
+ * @hdr:               Generic Header
+ * @processor_id:      ID of processor
+ * @cert_addr_low:     Lower 32bit (Little Endian) of certificate
+ * @cert_addr_high:    Higher 32bit (Little Endian) of certificate
+ *
+ * Request type is TISCI_MSG_PROC_AUTH_BOOT_IMAGE, response is a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_proc_auth_boot_image {
+       struct ti_sci_msg_hdr hdr;
+       u8 processor_id;
+       u32 cert_addr_low;
+       u32 cert_addr_high;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_proc_boot_status - Get processor boot status
+ * @hdr:               Generic Header
+ * @processor_id:      ID of processor
+ *
+ * Request type is TISCI_MSG_GET_PROC_BOOT_STATUS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_proc_boot_status {
+       struct ti_sci_msg_hdr hdr;
+       u8 processor_id;
+} __packed;
+
+/* ARMv8 Status Flags */
+#define PROC_BOOT_STATUS_FLAG_ARMV8_WFE                        0x00000001
+#define PROC_BOOT_STATUS_FLAG_ARMV8_WFI                        0x00000002
+
+/* R5 Status Flags */
+#define PROC_BOOT_STATUS_FLAG_R5_WFE                   0x00000001
+#define PROC_BOOT_STATUS_FLAG_R5_WFI                   0x00000002
+#define PROC_BOOT_STATUS_FLAG_R5_CLK_GATED             0x00000004
+#define PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED    0x00000100
+
+/**
+ * struct ti_sci_msg_resp_get_proc_boot_status - Processor boot status response
+ * @hdr:               Generic Header
+ * @processor_id:      ID of processor
+ * @bootvector_low:    Lower 32bit (Little Endian) of boot vector
+ * @bootvector_high:   Higher 32bit (Little Endian) of boot vector
+ * @config_flags:      Optional Processor specific Config Flags set.
+ * @control_flags:     Optional Processor specific Control Flags.
+ * @status_flags:      Optional Processor specific Status Flags set.
+ *
+ * Response to TISCI_MSG_GET_PROC_BOOT_STATUS.
+ */
+struct ti_sci_msg_resp_get_proc_boot_status {
+       struct ti_sci_msg_hdr hdr;
+       u8 processor_id;
+       u32 bootvector_low;
+       u32 bootvector_high;
+       u32 config_flags;
+       u32 control_flags;
+       u32 status_flags;
+} __packed;
+
 #endif /* __TI_SCI_H */
index acc02d38e117b6502ef48096b02eb4b3bba9afaa..90d5053636522d7d8340817ae22556e3e77d085d 100644 (file)
@@ -222,18 +222,55 @@ struct ti_sci_core_ops {
        int (*reboot_device)(const struct ti_sci_handle *handle);
 };
 
+/**
+ * struct ti_sci_proc_ops - Processor specific operations.
+ *
+ * @proc_request: Request for controlling a physical processor.
+ *             The requesting host should be in the processor access list.
+ * @proc_release: Relinquish a physical processor control
+ * @proc_handover: Handover a physical processor control to another host
+ *                in the permitted list.
+ * @set_proc_boot_cfg: Base configuration of the processor
+ * @set_proc_boot_ctrl: Setup limited control flags in specific cases.
+ * @proc_auth_boot_image:
+ * @get_proc_boot_status: Get the state of physical processor
+ *
+ * NOTE: for all these functions, the following parameters are generic in
+ * nature:
+ * -handle:    Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * -pid:       Processor ID
+ *
+ */
+struct ti_sci_proc_ops {
+       int (*proc_request)(const struct ti_sci_handle *handle, u8 pid);
+       int (*proc_release)(const struct ti_sci_handle *handle, u8 pid);
+       int (*proc_handover)(const struct ti_sci_handle *handle, u8 pid,
+                            u8 hid);
+       int (*set_proc_boot_cfg)(const struct ti_sci_handle *handle, u8 pid,
+                                u64 bv, u32 cfg_set, u32 cfg_clr);
+       int (*set_proc_boot_ctrl)(const struct ti_sci_handle *handle, u8 pid,
+                                 u32 ctrl_set, u32 ctrl_clr);
+       int (*proc_auth_boot_image)(const struct ti_sci_handle *handle, u8 pid,
+                                   u64 caddr);
+       int (*get_proc_boot_status)(const struct ti_sci_handle *handle, u8 pid,
+                                   u64 *bv, u32 *cfg_flags, u32 *ctrl_flags,
+                                   u32 *sts_flags);
+};
+
 /**
  * struct ti_sci_ops - Function support for TI SCI
  * @board_ops: Miscellaneous operations
  * @dev_ops:   Device specific operations
  * @clk_ops:   Clock specific operations
  * @core_ops:  Core specific operations
+ * @proc_ops:  Processor specific operations
  */
 struct ti_sci_ops {
        struct ti_sci_board_ops board_ops;
        struct ti_sci_dev_ops dev_ops;
        struct ti_sci_clk_ops clk_ops;
        struct ti_sci_core_ops core_ops;
+       struct ti_sci_proc_ops proc_ops;
 };
 
 /**