--- /dev/null
+What: /sys/bus/usb/devices/.../power/persist
+Date: May 2007
+KernelVersion: 2.6.23
+Contact: Alan Stern <stern@rowland.harvard.edu>
+Description:
+ If CONFIG_USB_PERSIST is set, then each USB device directory
+ will contain a file named power/persist. The file holds a
+ boolean value (0 or 1) indicating whether or not the
+ "USB-Persist" facility is enabled for the device. Since the
+ facility is inherently dangerous, it is disabled by default
+ for all devices except hubs. For more information, see
+ Documentation/usb/persist.txt.
+
+What: /sys/bus/usb/devices/.../power/autosuspend
+Date: March 2007
+KernelVersion: 2.6.21
+Contact: Alan Stern <stern@rowland.harvard.edu>
+Description:
+ Each USB device directory will contain a file named
+ power/autosuspend. This file holds the time (in seconds)
+ the device must be idle before it will be autosuspended.
+ 0 means the device will be autosuspended as soon as
+ possible. Negative values will prevent the device from
+ being autosuspended at all, and writing a negative value
+ will resume the device if it is already suspended.
+
+ The autosuspend delay for newly-created devices is set to
+ the value of the usbcore.autosuspend module parameter.
+
+What: /sys/bus/usb/device/.../power/connected_duration
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+ If CONFIG_PM_RUNTIME is enabled then this file
+ is present. When read, it returns the total time (in msec)
+ that the USB device has been connected to the machine. This
+ file is read-only.
+Users:
+ PowerTOP <power@bughost.org>
+ http://www.lesswatts.org/projects/powertop/
+
+What: /sys/bus/usb/device/.../power/active_duration
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+ If CONFIG_PM_RUNTIME is enabled then this file
+ is present. When read, it returns the total time (in msec)
+ that the USB device has been active, i.e. not in a suspended
+ state. This file is read-only.
+
+ Tools can use this file and the connected_duration file to
+ compute the percentage of time that a device has been active.
+ For example,
+ echo $((100 * `cat active_duration` / `cat connected_duration`))
+ will give an integer percentage. Note that this does not
+ account for counter wrap.
+Users:
+ PowerTOP <power@bughost.org>
+ http://www.lesswatts.org/projects/powertop/
+
+What: /sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
+Date: January 2008
+KernelVersion: 2.6.27
+Contact: Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+ When read, this file returns 1 if the interface driver
+ for this interface supports autosuspend. It also
+ returns 1 if no driver has claimed this interface, as an
+ unclaimed interface will not stop the device from being
+ autosuspended if all other interface drivers are idle.
+ The file returns 0 if autosuspend support has not been
+ added to the driver.
+Users:
+ USB PM tool
+ git://git.moblin.org/users/sarah/usb-pm-tool/
+
+What: /sys/bus/usb/device/.../avoid_reset_quirk
+Date: December 2009
+Contact: Oliver Neukum <oliver@neukum.org>
+Description:
+ Writing 1 to this file tells the kernel that this
+ device will morph into another mode when it is reset.
+ Drivers will not use reset for error handling for
+ such devices.
+Users:
+ usb_modeswitch
+
+What: /sys/bus/usb/devices/.../devnum
+KernelVersion: since at least 2.6.18
+Description:
+ Device address on the USB bus.
+
+What: /sys/bus/usb/devices/.../bConfigurationValue
+KernelVersion: since at least 2.6.18
+Description:
+ bConfigurationValue of the *active* configuration for the
+ device. Writing 0 or -1 to bConfigurationValue will reset the
+ active configuration (unconfigure the device). Writing
+ another value will change the active configuration.
+
+ Note that some devices, in violation of the USB spec, have a
+ configuration with a value equal to 0. Writing 0 to
+ bConfigurationValue for these devices will install that
+ configuration, rather then unconfigure the device.
+
+ Writing -1 will always unconfigure the device.
+
+What: /sys/bus/usb/devices/.../busnum
+KernelVersion: 2.6.22
+Description:
+ Bus-number of the USB-bus the device is connected to.
+
+What: /sys/bus/usb/devices/.../descriptors
+KernelVersion: 2.6.26
+Description:
+ Binary file containing cached descriptors of the device. The
+ binary data consists of the device descriptor followed by the
+ descriptors for each configuration of the device.
+ Note that the wTotalLength of the config descriptors can not
+ be trusted, as the device may have a smaller config descriptor
+ than it advertises. The bLength field of each (sub) descriptor
+ can be trusted, and can be used to seek forward one (sub)
+ descriptor at a time until the next config descriptor is found.
+ All descriptors read from this file are in bus-endian format
-What: /sys/bus/usb/devices/.../power/autosuspend
-Date: March 2007
-KernelVersion: 2.6.21
-Contact: Alan Stern <stern@rowland.harvard.edu>
-Description:
- Each USB device directory will contain a file named
- power/autosuspend. This file holds the time (in seconds)
- the device must be idle before it will be autosuspended.
- 0 means the device will be autosuspended as soon as
- possible. Negative values will prevent the device from
- being autosuspended at all, and writing a negative value
- will resume the device if it is already suspended.
-
- The autosuspend delay for newly-created devices is set to
- the value of the usbcore.autosuspend module parameter.
-
-What: /sys/bus/usb/devices/.../power/persist
-Date: May 2007
-KernelVersion: 2.6.23
-Contact: Alan Stern <stern@rowland.harvard.edu>
-Description:
- If CONFIG_USB_PERSIST is set, then each USB device directory
- will contain a file named power/persist. The file holds a
- boolean value (0 or 1) indicating whether or not the
- "USB-Persist" facility is enabled for the device. Since the
- facility is inherently dangerous, it is disabled by default
- for all devices except hubs. For more information, see
- Documentation/usb/persist.txt.
-
-What: /sys/bus/usb/device/.../power/connected_duration
-Date: January 2008
-KernelVersion: 2.6.25
-Contact: Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
- If CONFIG_PM_RUNTIME is enabled then this file
- is present. When read, it returns the total time (in msec)
- that the USB device has been connected to the machine. This
- file is read-only.
-Users:
- PowerTOP <power@bughost.org>
- http://www.lesswatts.org/projects/powertop/
-
-What: /sys/bus/usb/device/.../power/active_duration
-Date: January 2008
-KernelVersion: 2.6.25
-Contact: Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
- If CONFIG_PM_RUNTIME is enabled then this file
- is present. When read, it returns the total time (in msec)
- that the USB device has been active, i.e. not in a suspended
- state. This file is read-only.
-
- Tools can use this file and the connected_duration file to
- compute the percentage of time that a device has been active.
- For example,
- echo $((100 * `cat active_duration` / `cat connected_duration`))
- will give an integer percentage. Note that this does not
- account for counter wrap.
-Users:
- PowerTOP <power@bughost.org>
- http://www.lesswatts.org/projects/powertop/
-
-What: /sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
-Date: January 2008
-KernelVersion: 2.6.27
-Contact: Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
- When read, this file returns 1 if the interface driver
- for this interface supports autosuspend. It also
- returns 1 if no driver has claimed this interface, as an
- unclaimed interface will not stop the device from being
- autosuspended if all other interface drivers are idle.
- The file returns 0 if autosuspend support has not been
- added to the driver.
-Users:
- USB PM tool
- git://git.moblin.org/users/sarah/usb-pm-tool/
-
What: /sys/bus/usb/device/.../authorized
Date: July 2008
KernelVersion: 2.6.26
device IDs, exactly like reading from the entry
"/sys/bus/usb/drivers/.../new_id"
-What: /sys/bus/usb/device/.../avoid_reset_quirk
-Date: December 2009
-Contact: Oliver Neukum <oliver@neukum.org>
-Description:
- Writing 1 to this file tells the kernel that this
- device will morph into another mode when it is reset.
- Drivers will not use reset for error handling for
- such devices.
-Users:
- usb_modeswitch
-
What: /sys/bus/usb/devices/.../power/usb2_hardware_lpm
Date: September 2011
Contact: Andiry Xu <andiry.xu@amd.com>
Supported values are 0 - 15.
More information on how besl values map to microseconds can be found in
USB 2.0 ECN Errata for Link Power Management, section 4.10)
-
-What: /sys/bus/usb/devices/.../devnum
-KernelVersion: since at least 2.6.18
-Description:
- Device address on the USB bus.
-
-What: /sys/bus/usb/devices/.../bConfigurationValue
-KernelVersion: since at least 2.6.18
-Description:
- bConfigurationValue of the *active* configuration for the
- device. Writing 0 or -1 to bConfigurationValue will reset the
- active configuration (unconfigure the device). Writing
- another value will change the active configuration.
-
- Note that some devices, in violation of the USB spec, have a
- configuration with a value equal to 0. Writing 0 to
- bConfigurationValue for these devices will install that
- configuration, rather then unconfigure the device.
-
- Writing -1 will always unconfigure the device.
-
-What: /sys/bus/usb/devices/.../busnum
-KernelVersion: 2.6.22
-Description:
- Bus-number of the USB-bus the device is connected to.
-
-What: /sys/bus/usb/devices/.../descriptors
-KernelVersion: 2.6.26
-Description:
- Binary file containing cached descriptors of the device. The
- binary data consists of the device descriptor followed by the
- descriptors for each configuration of the device.
- Note that the wTotalLength of the config descriptors can not
- be trusted, as the device may have a smaller config descriptor
- than it advertises. The bLength field of each (sub) descriptor
- can be trusted, and can be used to seek forward one (sub)
- descriptor at a time until the next config descriptor is found.
- All descriptors read from this file are in bus-endian format
projects / kernel.git / commitdiff