Merge branch 'ioam-fixes'

Justin Iurman says:

====================
Correct the IOAM behavior for undefined trace type bits

(@Jakub @David: there will be a conflict for #2 when merging net->net-next, due
to commit [1]. The conflict is only 5-10 lines for #2 (#1 should be fine) inside
the file tools/testing/selftests/net/ioam6.sh, so quite short though possibly
ugly. Sorry for that, I didn't expect to post this one... Had I known, I'd have
made the opposite.)

Modify both the input and output behaviors regarding the trace type when one of
the undefined bits is set. The goal is to keep the interoperability when new
fields (aka new bits inside the range 12-21) will be defined.

The draft [2] says the following:
---------------------------------------------------------------
"Bit 12-21  Undefined.  These values are available for future
       assignment in the IOAM Trace-Type Registry (Section 8.2).
       Every future node data field corresponding to one of
       these bits MUST be 4-octets long.  An IOAM encapsulating
       node MUST set the value of each undefined bit to 0.  If
       an IOAM transit node receives a packet with one or more
       of these bits set to 1, it MUST either:

       1.  Add corresponding node data filled with the reserved
           value 0xFFFFFFFF, after the node data fields for the
           IOAM-Trace-Type bits defined above, such that the
           total node data added by this node in units of
           4-octets is equal to NodeLen, or

       2.  Not add any node data fields to the packet, even for
           the IOAM-Trace-Type bits defined above."
---------------------------------------------------------------

The output behavior has been modified to respect the fact that "an IOAM encap
node MUST set the value of each undefined bit to 0" (i.e., undefined bits can't
be set anymore).

As for the input behavior, current implementation is based on the second choice
(i.e., "not add any data fields to the packet [...]"). With this solution, any
interoperability is lost (i.e., if a new bit is defined, then an "old" kernel
implementation wouldn't fill IOAM data when such new bit is set inside the trace
type).

The input behavior is therefore relaxed and these undefined bits are now allowed
to be set. It is only possible thanks to the sentence "every future node data
field corresponding to one of these bits MUST be 4-octets long". Indeed, the
default empty value (the one for 4-octet fields) is inserted whenever an
undefined bit is set.

  [1] cfbe9b002109621bf9a282a4a24f9415ef14b57b
  [2] https://datatracker.ietf.org/doc/html/draft-ietf-ippm-ioam-data#section-5.4.1
====================

Signed-off-by: David S. Miller <davem@davemloft.net>