scsi: scsi_debug: Divide power on reset UNIT ATTENTION

To distinguish between resets sent by the SCSI mid-level error
handling and newly introduced devices (LUs), this Unit Attention:

   power on, reset, or bus reset occurred [0x29,0x0]

has been subdivided into that UA for the reset case and this new UA:

   power on occurred [0x29,0x1]

for the new device (LU) case. This makes debug a little easier to follow
when it is turned on (e.g. 'echo 0x1 > opts').

Bump driver version number.

Link: https://lore.kernel.org/r/20220109012853.301953-6-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index c6798d991fbe8bc7351106110d22f57495dcdbdf..85dd110c2b65598132e908eb0bfbb9ec1cc0995e 100644 (file)
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -7,7 +7,7 @@
  *  anything out of the ordinary is seen.
  * ^^^^^^^^^^^^^^^^^^^^^^^ Original ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  *
- * Copyright (C) 2001 - 2020 Douglas Gilbert
+ * Copyright (C) 2001 - 2021 Douglas Gilbert
  *
  *  For documentation see http://sg.danny.cz/sg/scsi_debug.html
  */
@@ -61,8 +61,8 @@
 #include "scsi_logging.h"
 
 /* make sure inq_product_rev string corresponds to this version */
-#define SDEBUG_VERSION "0190"  /* format to fit INQUIRY revision field */
-static const char *sdebug_version_date = "20200710";
+#define SDEBUG_VERSION "0191"  /* format to fit INQUIRY revision field */
+static const char *sdebug_version_date = "20210520";
 
 #define MY_NAME "scsi_debug"
 
@@ -84,6 +84,7 @@ static const char *sdebug_version_date = "20200710";
 #define INSUFF_RES_ASC 0x55
 #define INSUFF_RES_ASCQ 0x3
 #define POWER_ON_RESET_ASCQ 0x0
+#define POWER_ON_OCCURRED_ASCQ 0x1
 #define BUS_RESET_ASCQ 0x2     /* scsi bus reset occurred */
 #define MODE_CHANGED_ASCQ 0x1  /* mode parameters changed */
 #define CAPACITY_CHANGED_ASCQ 0x9
@@ -197,13 +198,14 @@ static const char *sdebug_version_date = "20200710";
  * priority. The UA numbers should be a sequence starting from 0 with
  * SDEBUG_NUM_UAS being 1 higher than the highest numbered UA. */
 #define SDEBUG_UA_POR 0                /* Power on, reset, or bus device reset */
-#define SDEBUG_UA_BUS_RESET 1
-#define SDEBUG_UA_MODE_CHANGED 2
-#define SDEBUG_UA_CAPACITY_CHANGED 3
-#define SDEBUG_UA_LUNS_CHANGED 4
-#define SDEBUG_UA_MICROCODE_CHANGED 5  /* simulate firmware change */
-#define SDEBUG_UA_MICROCODE_CHANGED_WO_RESET 6
-#define SDEBUG_NUM_UAS 7
+#define SDEBUG_UA_POOCCUR 1    /* Power on occurred */
+#define SDEBUG_UA_BUS_RESET 2
+#define SDEBUG_UA_MODE_CHANGED 3
+#define SDEBUG_UA_CAPACITY_CHANGED 4
+#define SDEBUG_UA_LUNS_CHANGED 5
+#define SDEBUG_UA_MICROCODE_CHANGED 6  /* simulate firmware change */
+#define SDEBUG_UA_MICROCODE_CHANGED_WO_RESET 7
+#define SDEBUG_NUM_UAS 8
 
 /* when 1==SDEBUG_OPT_MEDIUM_ERR, a medium error is simulated at this
  * sector on read commands: */
@@ -1086,6 +1088,12 @@ static int make_ua(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
                        if (sdebug_verbose)
                                cp = "power on reset";
                        break;
+               case SDEBUG_UA_POOCCUR:
+                       mk_sense_buffer(scp, UNIT_ATTENTION, UA_RESET_ASC,
+                                       POWER_ON_OCCURRED_ASCQ);
+                       if (sdebug_verbose)
+                               cp = "power on occurred";
+                       break;
                case SDEBUG_UA_BUS_RESET:
                        mk_sense_buffer(scp, UNIT_ATTENTION, UA_RESET_ASC,
                                        BUS_RESET_ASCQ);
@@ -5007,7 +5015,7 @@ static struct sdebug_dev_info *find_build_dev_info(struct scsi_device *sdev)
        open_devip->lun = sdev->lun;
        open_devip->sdbg_host = sdbg_host;
        atomic_set(&open_devip->num_in_q, 0);
-       set_bit(SDEBUG_UA_POR, open_devip->uas_bm);
+       set_bit(SDEBUG_UA_POOCCUR, open_devip->uas_bm);
        open_devip->used = true;
        return open_devip;
 }