]> git.baikalelectronics.ru Git - kernel.git/commitdiff
tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started
authorDmitry Osipenko <digetx@gmail.com>
Sun, 9 Feb 2020 16:44:15 +0000 (19:44 +0300)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 18 Jan 2023 10:42:06 +0000 (11:42 +0100)
commit 55e17a0a60ab90f1bf4d0254c678bcc6a8d53363 upstream.

It is possible to get an instant RX timeout or end-of-transfer interrupt
before RX DMA was started, if transaction is less than 16 bytes. Transfer
should be handled in PIO mode in this case because DMA can't handle it.
This patch brings back the original behaviour of the driver that was
changed by accident by a previous commit, it fixes occasional Bluetooth HW
initialization failures which I started to notice recently.

Fixes: 5593a37379f0 ("tty: serial: tegra: Activate RX DMA transfer by request")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200209164415.9632-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/serial-tegra.c

index aa67ca08fb268a3a2ff77df3be8c7145c84fbe50..7930f2a81b4c17e34b7e4fed5416bbcaddc81887 100644 (file)
@@ -694,11 +694,22 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
                                TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
 }
 
+static void do_handle_rx_pio(struct tegra_uart_port *tup)
+{
+       struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
+       struct tty_port *port = &tup->uport.state->port;
+
+       tegra_uart_handle_rx_pio(tup, port);
+       if (tty) {
+               tty_flip_buffer_push(port);
+               tty_kref_put(tty);
+       }
+}
+
 static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
                                      unsigned int residue)
 {
        struct tty_port *port = &tup->uport.state->port;
-       struct tty_struct *tty = tty_port_tty_get(port);
        unsigned int count;
 
        async_tx_ack(tup->rx_dma_desc);
@@ -707,11 +718,7 @@ static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
        /* If we are here, DMA is stopped */
        tegra_uart_copy_rx_to_tty(tup, port, count);
 
-       tegra_uart_handle_rx_pio(tup, port);
-       if (tty) {
-               tty_flip_buffer_push(port);
-               tty_kref_put(tty);
-       }
+       do_handle_rx_pio(tup);
 }
 
 static void tegra_uart_rx_dma_complete(void *args)
@@ -751,8 +758,10 @@ static void tegra_uart_terminate_rx_dma(struct tegra_uart_port *tup)
 {
        struct dma_tx_state state;
 
-       if (!tup->rx_dma_active)
+       if (!tup->rx_dma_active) {
+               do_handle_rx_pio(tup);
                return;
+       }
 
        dmaengine_pause(tup->rx_dma_chan);
        dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
@@ -821,18 +830,6 @@ static void tegra_uart_handle_modem_signal_change(struct uart_port *u)
                uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS);
 }
 
-static void do_handle_rx_pio(struct tegra_uart_port *tup)
-{
-       struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
-       struct tty_port *port = &tup->uport.state->port;
-
-       tegra_uart_handle_rx_pio(tup, port);
-       if (tty) {
-               tty_flip_buffer_push(port);
-               tty_kref_put(tty);
-       }
-}
-
 static irqreturn_t tegra_uart_isr(int irq, void *data)
 {
        struct tegra_uart_port *tup = data;