]> git.baikalelectronics.ru Git - kernel.git/commitdiff
Revert "i2c: imx: Fix reset of I2SR_IAL flag"
authorWolfram Sang <wsa@kernel.org>
Sat, 10 Oct 2020 11:03:54 +0000 (13:03 +0200)
committerWolfram Sang <wsa@kernel.org>
Sat, 10 Oct 2020 11:03:54 +0000 (13:03 +0200)
This reverts commit bc33a04fe92eb35c59fab4d00cf8b151d6b050d9. An updated
version was sent. So, revert this version and give the new version more
time for testing.

Signed-off-by: Wolfram Sang <wsa@kernel.org>
drivers/i2c/busses/i2c-imx.c

index cbdcab73a05563e0a5f9c05974d8ca16bff86dda..0ab5381aa012787069a39e9631df2e2ffd666f72 100644 (file)
@@ -412,19 +412,6 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
        dma->chan_using = NULL;
 }
 
-static void i2c_imx_clear_irq(struct imx_i2c_struct *i2c_imx, unsigned int bits)
-{
-       unsigned int temp;
-
-       /*
-        * i2sr_clr_opcode is the value to clear all interrupts. Here we want to
-        * clear only <bits>, so we write ~i2sr_clr_opcode with just <bits>
-        * toggled. This is required because i.MX needs W1C and Vybrid uses W0C.
-        */
-       temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ bits;
-       imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
-}
-
 static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool atomic)
 {
        unsigned long orig_jiffies = jiffies;
@@ -437,7 +424,8 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool a
 
                /* check for arbitration lost */
                if (temp & I2SR_IAL) {
-                       i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
+                       temp &= ~I2SR_IAL;
+                       imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
                        return -EAGAIN;
                }
 
@@ -635,7 +623,9 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
        if (temp & I2SR_IIF) {
                /* save status register */
                i2c_imx->i2csr = temp;
-               i2c_imx_clear_irq(i2c_imx, I2SR_IIF);
+               temp &= ~I2SR_IIF;
+               temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
+               imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
                wake_up(&i2c_imx->queue);
                return IRQ_HANDLED;
        }