]> git.baikalelectronics.ru Git - uboot.git/commitdiff
mmc: fsl_esdhc_imx: Implement wait_dat0 mmc ops
authorLoic Poulain <loic.poulain@linaro.org>
Thu, 26 May 2022 14:37:22 +0000 (16:37 +0200)
committerJaehoon Chung <jh80.chung@samsung.com>
Wed, 15 Jun 2022 06:39:59 +0000 (15:39 +0900)
Implement wait_dat0 mmc ops callbac, allowing to reduce SPL boot time.

Before (using grabserial):
[0.000001 0.000001] U-Boot SPL 2021.04-xxxx
[0.028257 0.028257] DDRINFO: start DRAM init
[0.028500 0.000243] DDRINFO: DRAM rate 3000MTS
[0.304627 0.276127] DDRINFO:ddrphy calibration done
[0.305647 0.001020] DDRINFO: ddrmix config done
[0.352584 0.046937] SEC0:  RNG instantiated
[0.374299 0.021715] Normal Boot
[0.374675 0.000376] Trying to boot from MMC2
[1.250580 0.875905] NOTICE:  BL31: v2.4(release):lf-5.10.72-2.2.0-0-g5782363f9
[1.251985 0.001405] NOTICE:  BL31: Built : 08:02:40, Apr 12 2022
[1.522560 0.270575]
[1.522734 0.000174]
[1.522788 0.000054] U-Boot 2021.04-xxxx

After:
[0.000001 0.000001] U-Boot SPL 2021.04-xxxx
[0.001614 0.001614] DDRINFO: start DRAM init
[0.002377 0.000763] DDRINFO: DRAM rate 3000MTS
[0.278494 0.276117] DDRINFO:ddrphy calibration done
[0.279266 0.000772] DDRINFO: ddrmix config done
[0.338432 0.059166] SEC0:  RNG instantiated
[0.339051 0.000619] Normal Boot
[0.339431 0.000380] Trying to boot from MMC2
[0.412587 0.073156] NOTICE:  BL31: v2.4(release):lf-5.15.5-1.0.0-0-g05f788b
[0.414191 0.001604] NOTICE:  BL31: Built : 10:35:26, Apr  6 2022
[0.700685 0.286494]
[0.700793 0.000108]
[0.700845 0.000052] U-Boot 2021.04-xxxx

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
drivers/mmc/fsl_esdhc_imx.c

index 893d7e241f2ee4ca30f7adaad94350e0edd2d1b4..9befb190bdf91873ea2b78e34b2fc7f1f0f98e6a 100644 (file)
@@ -1060,6 +1060,30 @@ static int esdhc_getcd_common(struct fsl_esdhc_priv *priv)
        return timeout > 0;
 }
 
+static int esdhc_wait_dat0_common(struct fsl_esdhc_priv *priv, int state,
+                                 int timeout_us)
+{
+       struct fsl_esdhc *regs = priv->esdhc_regs;
+       int ret, err;
+       u32 tmp;
+
+       /* make sure the card clock keep on */
+       esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
+
+       ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp,
+                               !!(tmp & PRSSTAT_DAT0) == !!state,
+                               timeout_us);
+
+       /* change to default setting, let host control the card clock */
+       esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
+
+       err = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp, tmp & PRSSTAT_SDOFF, 100);
+       if (err)
+               pr_warn("card clock not gate off as expect.\n");
+
+       return ret;
+}
+
 static int esdhc_reset(struct fsl_esdhc *regs)
 {
        ulong start;
@@ -1109,11 +1133,19 @@ static int esdhc_set_ios(struct mmc *mmc)
        return esdhc_set_ios_common(priv, mmc);
 }
 
+static int esdhc_wait_dat0(struct mmc *mmc, int state, int timeout_us)
+{
+       struct fsl_esdhc_priv *priv = mmc->priv;
+
+       return esdhc_wait_dat0_common(priv, state, timeout_us);
+}
+
 static const struct mmc_ops esdhc_ops = {
        .getcd          = esdhc_getcd,
        .init           = esdhc_init,
        .send_cmd       = esdhc_send_cmd,
        .set_ios        = esdhc_set_ios,
+       .wait_dat0      = esdhc_wait_dat0,
 };
 #endif
 
@@ -1576,25 +1608,9 @@ static int __maybe_unused fsl_esdhc_set_enhanced_strobe(struct udevice *dev)
 static int fsl_esdhc_wait_dat0(struct udevice *dev, int state,
                                int timeout_us)
 {
-       int ret, err;
-       u32 tmp;
        struct fsl_esdhc_priv *priv = dev_get_priv(dev);
-       struct fsl_esdhc *regs = priv->esdhc_regs;
 
-       /* make sure the card clock keep on */
-       esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
-
-       ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp,
-                               !!(tmp & PRSSTAT_DAT0) == !!state,
-                               timeout_us);
-
-       /* change to default setting, let host control the card clock */
-       esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
-       err = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp, tmp & PRSSTAT_SDOFF, 100);
-       if (err)
-               dev_warn(dev, "card clock not gate off as expect.\n");
-
-       return ret;
+       return esdhc_wait_dat0_common(priv, state, timeout_us);
 }
 
 static const struct dm_mmc_ops fsl_esdhc_ops = {