dt-bindings: remoteproc: qcom: q6v5: fix example

Use the node in the examples that is present in msm8974.dtsi, which uses
proper flags for the interrupts and add required 'xo' clock among
others.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606132324.1497349-1-luca@z3ntu.xyz

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index b677900b3aaed36739edf0139683ee54eb3fe0ed..f861862b97700ebbca0097184be52070b1192308 100644 (file)
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -257,29 +257,23 @@ related to the Hexagon.  See ../soc/qcom/qcom,smd.yaml and
 The following example describes the resources needed to boot control the
 Hexagon, as it is found on MSM8974 boards.
 
-       modem-rproc@fc880000 {
-               compatible = "qcom,q6v5-pil";
-               reg = <0xfc880000 0x100>,
-                     <0xfc820000 0x020>;
+       remoteproc@fc880000 {
+               compatible = "qcom,msm8974-mss-pil";
+               reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
                reg-names = "qdsp6", "rmb";
 
-               interrupts-extended = <&intc 0 24 1>,
-                                     <&modem_smp2p_in 0 0>,
-                                     <&modem_smp2p_in 1 0>,
-                                     <&modem_smp2p_in 2 0>,
-                                     <&modem_smp2p_in 3 0>;
-               interrupt-names = "wdog",
-                                 "fatal",
-                                 "ready",
-                                 "handover",
-                                 "stop-ack";
+               interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+                                     <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                                     <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                                     <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                                     <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+               interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 
                clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
                         <&gcc GCC_MSS_CFG_AHB_CLK>,
-                        <&gcc GCC_BOOT_ROM_AHB_CLK>;
-               clock-names = "iface", "bus", "mem";
-
-               qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+                        <&gcc GCC_BOOT_ROM_AHB_CLK>,
+                        <&xo_board>;
+               clock-names = "iface", "bus", "mem", "xo";
 
                resets = <&gcc GCC_MSS_RESTART>;
                reset-names = "mss_restart";
@@ -289,6 +283,8 @@ Hexagon, as it is found on MSM8974 boards.
                mx-supply = <&pm8841_s1>;
                pll-supply = <&pm8941_l12>;
 
+               qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
                qcom,smem-states = <&modem_smp2p_out 0>;
                qcom,smem-state-names = "stop";
 
@@ -299,4 +295,13 @@ Hexagon, as it is found on MSM8974 boards.
                mpss {
                        memory-region = <&mpss_region>;
                };
+
+               smd-edge {
+                       interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+                       qcom,ipc = <&apcs 8 12>;
+                       qcom,smd-edge = <0>;
+
+                       label = "modem";
+               };
        };