We report a topology change to the guest for any CPU hotplug.
The reporting to the guest is done using the Multiprocessor
Topology-Change-Report (MTCR) bit of the utility entry in the guest's
SCA which will be cleared during the interpretation of PTF.
On every vCPU creation we set the MCTR bit to let the guest know the
next time it uses the PTF with command 2 instruction that the
topology changed and that it should use the STSI(15.1.x) instruction
to get the topology details.
STSI(15.1.x) gives information on the CPU configuration topology.
Let's accept the interception of STSI with the function code 15 and
let the userland part of the hypervisor handle it when userland
supports the CPU Topology facility.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220714101824.101601-2-pmorel@linux.ibm.com
Message-Id: <
20220714101824.101601-2-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
};
};
+union sca_utility {
+ __u16 val;
+ struct {
+ __u16 mtcr : 1;
+ __u16 reserved : 15;
+ };
+};
+
struct bsca_block {
union ipte_control ipte_control;
__u64 reserved[5];
__u64 mcn;
- __u64 reserved2;
+ union sca_utility utility;
+ __u8 reserved2[6];
struct bsca_entry cpu[KVM_S390_BSCA_CPU_SLOTS];
};
struct esca_block {
union ipte_control ipte_control;
- __u64 reserved1[7];
+ __u64 reserved1[6];
+ union sca_utility utility;
+ __u8 reserved2[6];
__u64 mcn[4];
- __u64 reserved2[20];
+ __u64 reserved3[20];
struct esca_entry cpu[KVM_S390_ESCA_CPU_SLOTS];
};
#define ECB_SPECI 0x08
#define ECB_SRSI 0x04
#define ECB_HOSTPROTINT 0x02
+#define ECB_PTF 0x01
__u8 ecb; /* 0x0061 */
#define ECB2_CMMA 0x80
#define ECB2_IEP 0x20
return ret;
}
+/**
+ * kvm_s390_update_topology_change_report - update CPU topology change report
+ * @kvm: guest KVM description
+ * @val: set or clear the MTCR bit
+ *
+ * Updates the Multiprocessor Topology-Change-Report bit to signal
+ * the guest with a topology change.
+ * This is only relevant if the topology facility is present.
+ *
+ * The SCA version, bsca or esca, doesn't matter as offset is the same.
+ */
+static void kvm_s390_update_topology_change_report(struct kvm *kvm, bool val)
+{
+ union sca_utility new, old;
+ struct bsca_block *sca;
+
+ read_lock(&kvm->arch.sca_lock);
+ sca = kvm->arch.sca;
+ do {
+ old = READ_ONCE(sca->utility);
+ new = old;
+ new.mtcr = val;
+ } while (cmpxchg(&sca->utility.val, old.val, new.val) != old.val);
+ read_unlock(&kvm->arch.sca_lock);
+}
+
static int kvm_s390_vm_set_attr(struct kvm *kvm, struct kvm_device_attr *attr)
{
int ret;
kvm_clear_async_pf_completion_queue(vcpu);
if (!kvm_is_ucontrol(vcpu->kvm))
sca_del_vcpu(vcpu);
+ kvm_s390_update_topology_change_report(vcpu->kvm, 1);
if (kvm_is_ucontrol(vcpu->kvm))
gmap_remove(vcpu->arch.gmap);
vcpu->arch.sie_block->ecb |= ECB_HOSTPROTINT;
if (test_kvm_facility(vcpu->kvm, 9))
vcpu->arch.sie_block->ecb |= ECB_SRSI;
+ if (test_kvm_facility(vcpu->kvm, 11))
+ vcpu->arch.sie_block->ecb |= ECB_PTF;
if (test_kvm_facility(vcpu->kvm, 73))
vcpu->arch.sie_block->ecb |= ECB_TE;
if (!kvm_is_ucontrol(vcpu->kvm))
rc = kvm_s390_vcpu_setup(vcpu);
if (rc)
goto out_ucontrol_uninit;
+
+ kvm_s390_update_topology_change_report(vcpu->kvm, 1);
return 0;
out_ucontrol_uninit:
if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
- if (fc > 3) {
- kvm_s390_set_psw_cc(vcpu, 3);
- return 0;
- }
+ /* Bailout forbidden function codes */
+ if (fc > 3 && fc != 15)
+ goto out_no_data;
+
+ /*
+ * fc 15 is provided only with
+ * - PTF/CPU topology support through facility 15
+ * - KVM_CAP_S390_USER_STSI
+ */
+ if (fc == 15 && (!test_kvm_facility(vcpu->kvm, 11) ||
+ !vcpu->kvm->arch.user_stsi))
+ goto out_no_data;
if (vcpu->run->s.regs.gprs[0] & 0x0fffff00
|| vcpu->run->s.regs.gprs[1] & 0xffff0000)
goto out_no_data;
handle_stsi_3_2_2(vcpu, (void *) mem);
break;
+ case 15: /* fc 15 is fully handled in userspace */
+ insert_stsi_usr_data(vcpu, operand2, ar, fc, sel1, sel2);
+ trace_kvm_s390_handle_stsi(vcpu, fc, sel1, sel2, operand2);
+ return -EREMOTE;
}
if (kvm_s390_pv_cpu_is_protected(vcpu)) {
memcpy((void *)sida_origin(vcpu->arch.sie_block), (void *)mem,
/* Host-protection-interruption introduced with ESOP */
if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_ESOP))
scb_s->ecb |= scb_o->ecb & ECB_HOSTPROTINT;
+ /*
+ * CPU Topology
+ * This facility only uses the utility field of the SCA and none of
+ * the cpu entries that are problematic with the other interpretation
+ * facilities so we can pass it through
+ */
+ if (test_kvm_facility(vcpu->kvm, 11))
+ scb_s->ecb |= scb_o->ecb & ECB_PTF;
/* transactional execution */
if (test_kvm_facility(vcpu->kvm, 73) && wants_tx) {
/* remap the prefix is tx is toggled on */