]> git.baikalelectronics.ru Git - uboot.git/commitdiff
net: eqos: add function to get phy node and address
authorYe Li <ye.li@nxp.com>
Tue, 26 Jul 2022 08:41:16 +0000 (16:41 +0800)
committerStefano Babic <sbabic@denx.de>
Tue, 26 Jul 2022 09:29:01 +0000 (11:29 +0200)
Since new atheros PHY driver needs to access its PHY node through
phy device, we have to assign the phy node in ethernet controller
driver. Otherwise the PHY driver will fail to get some nodes
and properties.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
drivers/net/dwc_eth_qos.c
drivers/net/dwc_eth_qos.h

index 1f24f5cb0cfe206fc0faf2dcd38267c9cc92870a..a4380d17d9ca9f7773e174e92558ec4c3b4d2cc0 100644 (file)
@@ -719,6 +719,24 @@ static int eqos_read_rom_hwaddr(struct udevice *dev)
        return !is_valid_ethaddr(pdata->enetaddr);
 }
 
+static int eqos_get_phy_addr(struct eqos_priv *priv, struct udevice *dev)
+{
+       struct ofnode_phandle_args phandle_args;
+       int reg;
+
+       if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
+                                      &phandle_args)) {
+               debug("Failed to find phy-handle");
+               return -ENODEV;
+       }
+
+       priv->phy_of_node = phandle_args.node;
+
+       reg = ofnode_read_u32_default(phandle_args.node, "reg", 0);
+
+       return reg;
+}
+
 static int eqos_start(struct udevice *dev)
 {
        struct eqos_priv *eqos = dev_get_priv(dev);
@@ -767,9 +785,7 @@ static int eqos_start(struct udevice *dev)
         */
        if (!eqos->phy) {
                int addr = -1;
-#ifdef CONFIG_DM_ETH_PHY
-               addr = eth_phy_get_addr(dev);
-#endif
+               addr = eqos_get_phy_addr(eqos, dev);
 #ifdef DWC_NET_PHYADDR
                addr = DWC_NET_PHYADDR;
 #endif
@@ -788,6 +804,7 @@ static int eqos_start(struct udevice *dev)
                        }
                }
 
+               eqos->phy->node = eqos->phy_of_node;
                ret = phy_config(eqos->phy);
                if (ret < 0) {
                        pr_err("phy_config() failed: %d", ret);
index ce90e1f1ce1cdbe651ab57fa1044afc017dbd0a5..f470189e8d466cffb1724a1354f3bb0320060d30 100644 (file)
@@ -261,6 +261,7 @@ struct eqos_priv {
        struct clk clk_slave_bus;
        struct mii_dev *mii;
        struct phy_device *phy;
+       ofnode phy_of_node;
        u32 max_speed;
        void *descs;
        int tx_desc_idx, rx_desc_idx;