HID: alps: Separate U1 device code

Create 'static int u1_init()' and factor out U1 device initialization code from
main initialization and introduce per-device 'has_sp' flag.

[jkosina@suse.cz: rewrite changelog]
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c
index 519bfcf9eaf0e5dc4f28933a592bb14768333302..c4ea5c6c9be97f598e37dc8fed257de684d454b8 100644 (file)
--- a/drivers/hid/hid-alps.c
+++ b/drivers/hid/hid-alps.c
@@ -75,6 +75,7 @@
  * @y_max: maximum y coordinate value
  * @btn_cnt: number of buttons
  * @sp_btn_cnt: number of stick buttons
+ * @has_sp: boolean of sp existense
  */
 struct u1_dev {
        struct input_dev *input;
@@ -96,6 +97,7 @@ struct u1_dev {
        u32     y_max;
        u32     btn_cnt;
        u32     sp_btn_cnt;
+       u8      has_sp;
 };
 
 static int u1_read_write_register(struct hid_device *hdev, u32 address,
@@ -255,99 +257,130 @@ static int alps_post_resume(struct hid_device *hdev)
 }
 #endif /* CONFIG_PM */
 
-static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
+static int u1_init(struct hid_device *hdev, struct u1_dev *pri_data)
 {
-       struct u1_dev *data = hid_get_drvdata(hdev);
-       struct input_dev *input = hi->input, *input2;
        int ret;
-       int res_x, res_y, i;
-
-       data->input = input;
-
-       hid_dbg(hdev, "Opening low level driver\n");
-       ret = hid_hw_open(hdev);
-       if (ret)
-               return ret;
-
-       /* Allow incoming hid reports */
-       hid_device_io_start(hdev);
 
        /* Device initialization */
        ret = u1_read_write_register(hdev, ADDRESS_U1_DEV_CTRL_1,
-                       &data->dev_ctrl, 0, true);
+                       &pri_data->dev_ctrl, 0, true);
        if (ret < 0) {
                dev_err(&hdev->dev, "failed U1_DEV_CTRL_1 (%d)\n", ret);
                goto exit;
        }
 
-       data->dev_ctrl &= ~U1_DISABLE_DEV;
-       data->dev_ctrl |= U1_TP_ABS_MODE;
+       pri_data->dev_ctrl &= ~U1_DISABLE_DEV;
+       pri_data->dev_ctrl |= U1_TP_ABS_MODE;
        ret = u1_read_write_register(hdev, ADDRESS_U1_DEV_CTRL_1,
-                       NULL, data->dev_ctrl, false);
+                       NULL, pri_data->dev_ctrl, false);
        if (ret < 0) {
                dev_err(&hdev->dev, "failed to change TP mode (%d)\n", ret);
                goto exit;
        }
 
        ret = u1_read_write_register(hdev, ADDRESS_U1_NUM_SENS_X,
-                       &data->sen_line_num_x, 0, true);
+                       &pri_data->sen_line_num_x, 0, true);
        if (ret < 0) {
                dev_err(&hdev->dev, "failed U1_NUM_SENS_X (%d)\n", ret);
                goto exit;
        }
 
        ret = u1_read_write_register(hdev, ADDRESS_U1_NUM_SENS_Y,
-                       &data->sen_line_num_y, 0, true);
+                       &pri_data->sen_line_num_y, 0, true);
                if (ret < 0) {
                dev_err(&hdev->dev, "failed U1_NUM_SENS_Y (%d)\n", ret);
                goto exit;
        }
 
        ret = u1_read_write_register(hdev, ADDRESS_U1_PITCH_SENS_X,
-                       &data->pitch_x, 0, true);
+                       &pri_data->pitch_x, 0, true);
        if (ret < 0) {
                dev_err(&hdev->dev, "failed U1_PITCH_SENS_X (%d)\n", ret);
                goto exit;
        }
 
        ret = u1_read_write_register(hdev, ADDRESS_U1_PITCH_SENS_Y,
-                       &data->pitch_y, 0, true);
+                       &pri_data->pitch_y, 0, true);
        if (ret < 0) {
                dev_err(&hdev->dev, "failed U1_PITCH_SENS_Y (%d)\n", ret);
                goto exit;
        }
 
        ret = u1_read_write_register(hdev, ADDRESS_U1_RESO_DWN_ABS,
-               &data->resolution, 0, true);
+               &pri_data->resolution, 0, true);
        if (ret < 0) {
                dev_err(&hdev->dev, "failed U1_RESO_DWN_ABS (%d)\n", ret);
                goto exit;
        }
+       pri_data->x_active_len_mm =
+               (pri_data->pitch_x * (pri_data->sen_line_num_x - 1)) / 10;
+       pri_data->y_active_len_mm =
+               (pri_data->pitch_y * (pri_data->sen_line_num_y - 1)) / 10;
+
+       pri_data->x_max =
+               (pri_data->resolution << 2) * (pri_data->sen_line_num_x - 1);
+       pri_data->y_max =
+               (pri_data->resolution << 2) * (pri_data->sen_line_num_y - 1);
 
        ret = u1_read_write_register(hdev, ADDRESS_U1_PAD_BTN,
-                       &data->btn_info, 0, true);
+                       &pri_data->btn_info, 0, true);
        if (ret < 0) {
                dev_err(&hdev->dev, "failed U1_PAD_BTN (%d)\n", ret);
                goto exit;
        }
 
+       pri_data->has_sp = 0;
        /* Check StickPointer device */
        ret = u1_read_write_register(hdev, ADDRESS_U1_DEVICE_TYP,
-                       &data->dev_type, 0, true);
+                       &pri_data->dev_type, 0, true);
        if (ret < 0) {
                dev_err(&hdev->dev, "failed U1_DEVICE_TYP (%d)\n", ret);
                goto exit;
        }
 
-       data->x_active_len_mm =
-               (data->pitch_x * (data->sen_line_num_x - 1)) / 10;
-       data->y_active_len_mm =
-               (data->pitch_y * (data->sen_line_num_y - 1)) / 10;
+       if (pri_data->dev_type & U1_DEVTYPE_SP_SUPPORT) {
+               pri_data->dev_ctrl |= U1_SP_ABS_MODE;
+               ret = u1_read_write_register(hdev, ADDRESS_U1_DEV_CTRL_1,
+                       NULL, pri_data->dev_ctrl, false);
+               if (ret < 0) {
+                       dev_err(&hdev->dev, "failed SP mode (%d)\n", ret);
+                       goto exit;
+               }
+
+               ret = u1_read_write_register(hdev, ADDRESS_U1_SP_BTN,
+                       &pri_data->sp_btn_info, 0, true);
+               if (ret < 0) {
+                       dev_err(&hdev->dev, "failed U1_SP_BTN (%d)\n", ret);
+                       goto exit;
+               }
+               pri_data->has_sp = 1;
+       }
 
-       data->x_max =
-               (data->resolution << 2) * (data->sen_line_num_x - 1);
-       data->y_max =
-               (data->resolution << 2) * (data->sen_line_num_y - 1);
+exit:
+       return ret;
+}
+
+static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
+{
+       struct u1_dev *data = hid_get_drvdata(hdev);
+       struct input_dev *input = hi->input, *input2;
+       int ret;
+       int res_x, res_y, i;
+
+       data->input = input;
+
+       hid_dbg(hdev, "Opening low level driver\n");
+       ret = hid_hw_open(hdev);
+       if (ret)
+               return ret;
+
+       /* Allow incoming hid reports */
+       hid_device_io_start(hdev);
+
+       ret = u1_init(hdev, data);
+
+       if (ret)
+               goto exit;
 
        __set_bit(EV_ABS, input->evbit);
        input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->x_max, 0, 0);
@@ -379,8 +412,7 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
 
 
        /* Stick device initialization */
-       if (data->dev_type & U1_DEVTYPE_SP_SUPPORT) {
-
+       if (data->has_sp) {
                input2 = input_allocate_device();
                if (!input2) {
                        ret = -ENOMEM;
@@ -388,24 +420,6 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
                }
 
                data->input2 = input2;
-
-               data->dev_ctrl |= U1_SP_ABS_MODE;
-               ret = u1_read_write_register(hdev, ADDRESS_U1_DEV_CTRL_1,
-                       NULL, data->dev_ctrl, false);
-               if (ret < 0) {
-                       dev_err(&hdev->dev, "failed SP mode (%d)\n", ret);
-                       input_free_device(input2);
-                       goto exit;
-               }
-
-               ret = u1_read_write_register(hdev, ADDRESS_U1_SP_BTN,
-                       &data->sp_btn_info, 0, true);
-               if (ret < 0) {
-                       dev_err(&hdev->dev, "failed U1_SP_BTN (%d)\n", ret);
-                       input_free_device(input2);
-                       goto exit;
-               }
-
                input2->phys = input->phys;
                input2->name = "DualPoint Stick";
                input2->id.bustype = BUS_I2C;