reg = <0x5A003000 0x550
0x5A004000 0x234>;
- clocks = <&rcc_clk AXIDCG>,
- <&rcc_clk DDRC1>,
- <&rcc_clk DDRC2>,
- <&rcc_clk DDRPHYC>,
- <&rcc_clk DDRCAPB>,
- <&rcc_clk DDRPHYCAPB>;
+ clocks = <&rcc AXIDCG>,
+ <&rcc DDRC1>,
+ <&rcc DDRC2>,
+ <&rcc DDRPHYC>,
+ <&rcc DDRCAPB>,
+ <&rcc DDRPHYCAPB>;
clock-names = "axidcg",
"ddrc1",
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+/ {
+ soc {
+ pinctrl: pin-controller@50002000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-pinctrl";
+ ranges = <0 0x50002000 0xa400>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+ pins-are-numbered;
+
+ gpioa: gpio@50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc GPIOA>;
+ st,bank-name = "GPIOA";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc GPIOB>;
+ st,bank-name = "GPIOB";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc GPIOC>;
+ st,bank-name = "GPIOC";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&rcc GPIOD>;
+ st,bank-name = "GPIOD";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&rcc GPIOE>;
+ st,bank-name = "GPIOE";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&rcc GPIOF>;
+ st,bank-name = "GPIOF";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&rcc GPIOG>;
+ st,bank-name = "GPIOG";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&rcc GPIOH>;
+ st,bank-name = "GPIOH";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&rcc GPIOI>;
+ st,bank-name = "GPIOI";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@5000b000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x400>;
+ clocks = <&rcc GPIOJ>;
+ st,bank-name = "GPIOJ";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@5000c000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa000 0x400>;
+ clocks = <&rcc GPIOK>;
+ st,bank-name = "GPIOK";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+
+ cec_pins_a: cec-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, AF4)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c1_pins_a: i2c1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_a: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c5_pins_a: i2c5-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+ <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm2_pins_a: pwm2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_pins_a: pwm8-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm12_pins_a: pwm12-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ qspi_clk_pins_a: qspi-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_bk1_pins_a: qspi-bk1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_bk2_pins_a: qspi-bk2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+ sdmmc1_b4_pins_a: sdmmc1-b4@0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir@0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>, /* SDMMC1_CDIR */
+ <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+ sdmmc2_b4_pins_a: sdmmc2-b4@0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_d47_pins_a: sdmmc2-d47@0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ uart4_pins_a: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+ };
+
+ pinctrl_z: pin-controller-z@54004000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-z-pinctrl";
+ ranges = <0 0x54004000 0x400>;
+ pins-are-numbered;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+
+ gpioz: gpio@54004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&rcc GPIOZ>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+
+ i2c4_pins_a: i2c4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+ };
+ };
+};
soc {
u-boot,dm-pre-reloc;
- };
- stgen: stgen@5C008000 {
- compatible = "st,stm32-stgen";
- reg = <0x5C008000 0x1000>;
- status = "okay";
- u-boot,dm-pre-reloc;
+ stgen: stgen@5C008000 {
+ compatible = "st,stm32-stgen";
+ reg = <0x5C008000 0x1000>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+ };
};
};
u-boot,dm-pre-reloc;
};
-&rcc_clk {
- u-boot,dm-pre-reloc;
-};
-
-&rcc_rst {
- u-boot,dm-pre-reloc;
-};
-
&rcc_reboot {
u-boot,dm-pre-reloc;
};
+++ /dev/null
-/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-/*
- * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/stm32mp1-clks.h>
-#include <dt-bindings/reset-controller/stm32mp1-resets.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <0>;
- };
-
- cpu1: cpu@1 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <1>;
- };
- };
-
- aliases {
- serial3 = &uart4;
- };
-
- intc: interrupt-controller@a0021000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0xa0021000 0x1000>,
- <0xa0022000 0x2000>;
- };
-
- clocks {
- clk_hse: clk-hse {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- };
-
- clk_hsi: clk-hsi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <64000000>;
- };
-
- clk_lse: clk-lse {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- };
-
- clk_lsi: clk-lsi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32000>;
- };
-
- clk_csi: clk-csi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <4000000>;
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
- ranges;
-
- uart4: serial@40010000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40010000 0x400>;
- clocks = <&rcc_clk UART4_K>;
- status = "disabled";
- };
-
- sdmmc3: sdmmc@48004000 {
- compatible = "st,stm32-sdmmc2";
- reg = <0x48004000 0x400>, <0x48005000 0x400>;
- reg-names = "sdmmc", "delay";
- interrupts = <GIC_SPI 137 IRQ_TYPE_NONE>;
- clocks = <&rcc_clk SDMMC3_K>;
- resets = <&rcc_rst SDMMC3_R>;
- st,idma = <1>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <120000000>;
- status = "disabled";
- };
-
- rcc: rcc@50000000 {
- compatible = "syscon", "simple-mfd";
-
- reg = <0x50000000 0x1000>;
-
- rcc_clk: rcc-clk@50000000 {
- #clock-cells = <1>;
- compatible = "st,stm32mp1-rcc-clk";
- };
-
- rcc_rst: rcc-reset@50000000 {
- #reset-cells = <1>;
- compatible = "st,stm32mp1-rcc-rst";
- };
-
- rcc_reboot: rcc-reboot@50000000 {
- compatible = "syscon-reboot";
- regmap = <&rcc>;
- offset = <0x404>;
- mask = <0x1>;
- };
- };
-
- pwr: pwr@50001000 {
- compatible = "st,stm32mp1-pwr", "st,stm32-pwr", "syscon", "simple-mfd";
- reg = <0x50001000 0x400>;
- system-power-controller;
- interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
- st,sysrcc = <&rcc>;
- clocks = <&rcc_clk PLL2_R>;
- clock-names = "phyclk";
-
- pwr-regulators@c {
- compatible = "st,stm32mp1,pwr-reg";
- st,tzcr = <&rcc 0x0 0x1>;
-
- reg11: reg11 {
- regulator-name = "reg11";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
-
- reg18: reg18 {
- regulator-name = "reg18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- usb33: usb33 {
- regulator-name = "usb33";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
- };
- };
-
- vrefbuf: vrefbuf@50025000 {
- compatible = "st,stm32-vrefbuf";
- reg = <0x50025000 0x8>;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2500000>;
- clocks = <&rcc_clk VREF>;
- status = "disabled";
- };
-
- pinctrl: pin-controller {
- compatible = "st,stm32mp157-pinctrl";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x50002000 0xa400>;
- pins-are-numbered;
-
- gpioa: gpio@50002000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x0 0x400>;
- clocks = <&rcc_clk GPIOA>;
- st,bank-name = "GPIOA";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- status = "disabled";
- };
-
- gpiob: gpio@50003000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x400>;
- clocks = <&rcc_clk GPIOB>;
- st,bank-name = "GPIOB";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- status = "disabled";
- };
-
- gpioc: gpio@50004000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x400>;
- clocks = <&rcc_clk GPIOC>;
- st,bank-name = "GPIOC";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- status = "disabled";
- };
-
- gpiod: gpio@50005000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x3000 0x400>;
- clocks = <&rcc_clk GPIOD>;
- st,bank-name = "GPIOD";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- status = "disabled";
- };
-
- gpioe: gpio@50006000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x4000 0x400>;
- clocks = <&rcc_clk GPIOE>;
- st,bank-name = "GPIOE";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- status = "disabled";
- };
-
- gpiof: gpio@50007000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x5000 0x400>;
- clocks = <&rcc_clk GPIOF>;
- st,bank-name = "GPIOF";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 80 16>;
- status = "disabled";
- };
-
- gpiog: gpio@50008000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x6000 0x400>;
- clocks = <&rcc_clk GPIOG>;
- st,bank-name = "GPIOG";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 96 16>;
- status = "disabled";
- };
-
- gpioh: gpio@50009000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x7000 0x400>;
- clocks = <&rcc_clk GPIOH>;
- st,bank-name = "GPIOH";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 112 16>;
- status = "disabled";
- };
-
- gpioi: gpio@5000a000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x8000 0x400>;
- clocks = <&rcc_clk GPIOI>;
- st,bank-name = "GPIOI";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 128 16>;
- status = "disabled";
- };
-
- gpioj: gpio@5000b000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x9000 0x400>;
- clocks = <&rcc_clk GPIOJ>;
- st,bank-name = "GPIOJ";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 144 16>;
- status = "disabled";
- };
-
- gpiok: gpio@5000c000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0xa000 0x400>;
- clocks = <&rcc_clk GPIOK>;
- st,bank-name = "GPIOK";
- ngpios = <8>;
- gpio-ranges = <&pinctrl 0 160 8>;
- status = "disabled";
- };
- };
-
- pinctrl_z: pin-controller-z {
- compatible = "st,stm32mp157-z-pinctrl";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x54004000 0x400>;
- pins-are-numbered;
-
- gpioz: gpio@54004000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0 0x400>;
- clocks = <&rcc_clk GPIOZ>;
- st,bank-name = "GPIOZ";
- st,bank-ioport = <11>;
- ngpios = <8>;
- gpio-ranges = <&pinctrl_z 0 400 8>;
- status = "disabled";
- };
- };
-
- sdmmc1: sdmmc@58005000 {
- compatible = "st,stm32-sdmmc2";
- reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
- reg-names = "sdmmc", "delay";
- clocks = <&rcc_clk SDMMC1_K>;
- resets = <&rcc_rst SDMMC1_R>;
- st,idma = <1>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <120000000>;
- status = "disabled";
- };
-
- sdmmc2: sdmmc@58007000 {
- compatible = "st,stm32-sdmmc2";
- reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
- reg-names = "sdmmc", "delay";
- interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
- clocks = <&rcc_clk SDMMC2_K>;
- resets = <&rcc_rst SDMMC2_R>;
- st,idma = <1>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <120000000>;
- status = "disabled";
- };
-
- i2c4: i2c@5c002000 {
- compatible = "st,stm32f7-i2c";
- reg = <0x5c002000 0x400>;
- interrupt-names = "event", "error", "wakeup";
- clocks = <&rcc_clk I2C4_K>;
- resets = <&rcc_rst I2C4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- wakeup-source;
- status = "disabled";
- };
- };
-};
};
/* CLOCK init */
-&rcc_clk {
+&rcc {
st,clksrc = <
CLK_MPU_PLL1P
CLK_AXI_PLL2P
-/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
-
/dts-v1/;
-#include "stm32mp157.dtsi"
+#include "stm32mp157c.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
#include <dt-bindings/mfd/st,stpmu1.h>
/ {
- model = "STMicroelectronics STM32MP157C pmic eval daughter";
+ model = "STMicroelectronics STM32MP157C eval daughter";
compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
chosen {
- bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
stdout-path = "serial3:115200n8";
};
- memory {
+ memory@c0000000 {
reg = <0xC0000000 0x40000000>;
};
};
};
-&gpioa {
- status = "okay";
-};
-
-&gpiob {
- status = "okay";
-};
-
-&gpioc {
- status = "okay";
-};
-
-&gpiod {
- status = "okay";
-};
-
-&gpioe {
- status = "okay";
-};
-
-&gpiof {
- status = "okay";
-};
-
-&gpiog {
+&rng1 {
status = "okay";
};
-&gpioh {
+&timers6 {
status = "okay";
-};
-
-&gpioi {
- status = "okay";
-};
-
-&gpioj {
- status = "okay";
-};
-
-&gpiok {
- status = "okay";
-};
-
-&gpioz {
- status = "okay";
-};
-
-&pinctrl {
- uart4_pins_a: uart4@0 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-disable;
- };
- };
-
- sdmmc1_b4_pins_a: sdmmc1-b4@0 {
- pins {
- pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
- <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <3>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- sdmmc1_dir_pins_a: sdmmc1-dir@0 {
- pins {
- pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
- <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
- <STM32_PINMUX('B', 9, AF11)>, /* SDMMC1_CDIR */
- <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
- slew-rate = <3>;
- drive-push-pull;
- bias-pull-up;
- };
- };
- sdmmc2_b4_pins_a: sdmmc2-b4@0 {
- pins {
- pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
- <STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */
- <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
- slew-rate = <3>;
- drive-push-pull;
- bias-pull-up;
- };
- };
-
- sdmmc2_d47_pins_a: sdmmc2-d47@0 {
- pins {
- pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
- <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
- <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
- slew-rate = <3>;
- drive-push-pull;
- bias-pull-up;
- };
- };
-};
-
-&pinctrl_z {
- i2c4_pins_a: i2c4@0 {
- pins {
- pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
- <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
+ timer@5 {
+ status = "okay";
};
};
};
};
+&pwr {
+ pwr-supply = <&vdd>;
+};
+
&sdmmc1 {
- pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
broken-cd;
st,dirpol;
};
&sdmmc2 {
- pinctrl-names = "default";
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
non-removable;
no-sd;
st,dirpol;
st,negedge;
bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&vdd>;
status = "okay";
};
pinctrl-0 = <&uart4_pins_a>;
status = "okay";
};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <®11>;
+ vdda1v8-supply = <®18>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <®11>;
+ vdda1v8-supply = <®18>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
+ };
+
+ aliases {
+ gpio0 = &gpioa;
+ gpio1 = &gpiob;
+ gpio2 = &gpioc;
+ gpio3 = &gpiod;
+ gpio4 = &gpioe;
+ gpio5 = &gpiof;
+ gpio6 = &gpiog;
+ gpio7 = &gpioh;
+ gpio8 = &gpioi;
+ gpio9 = &gpioj;
+ gpio10 = &gpiok;
+ serial0 = &usart1;
+ serial1 = &usart2;
+ serial2 = &usart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &usart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ };
+
+ intc: interrupt-controller@a0021000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xa0021000 0x1000>,
+ <0xa0022000 0x2000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&intc>;
+ };
+
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lse: clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk_lsi: clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_csi: clk-csi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timers2: timer@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc TIM2_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
+ timers3: timer@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc TIM3_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ timers4: timer@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc TIM4_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+ };
+
+ timers5: timer@40003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40003000 0x400>;
+ clocks = <&rcc TIM5_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+
+ timers6: timer@40004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40004000 0x400>;
+ clocks = <&rcc TIM6_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ timers7: timer@40005000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40005000 0x400>;
+ clocks = <&rcc TIM7_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timer@40006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40006000 0x400>;
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@40007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40007000 0x400>;
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@40008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40008000 0x400>;
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
+ lptimer1: timer@40009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x40009000 0x400>;
+ clocks = <&rcc LPTIM1_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@0 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ usart2: serial@4000e000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000e000 0x400>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ status = "disabled";
+ };
+
+ usart3: serial@4000f000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000f000 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
+ status = "disabled";
+ };
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART4_K>;
+ status = "disabled";
+ };
+
+ uart5: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@40012000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40012000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C1_K>;
+ resets = <&rcc I2C1_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40013000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40013000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@40014000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40014000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@40015000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40015000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ cec: cec@40016000 {
+ compatible = "st,stm32-cec";
+ reg = <0x40016000 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CEC_K>, <&clk_lse>;
+ clock-names = "cec", "hdmi-cec";
+ status = "disabled";
+ };
+
+ dac: dac@40017000 {
+ compatible = "st,stm32h7-dac-core";
+ reg = <0x40017000 0x400>;
+ clocks = <&rcc DAC12>;
+ clock-names = "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ dac1: dac@1 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <1>;
+ status = "disabled";
+ };
+
+ dac2: dac@2 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ uart7: serial@40018000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
+ status = "disabled";
+ };
+
+ uart8: serial@40019000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
+ status = "disabled";
+ };
+
+ timers1: timer@44000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44000000 0x400>;
+ clocks = <&rcc TIM1_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timer@44001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44001000 0x400>;
+ clocks = <&rcc TIM8_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+
+ usart6: serial@44003000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x44003000 0x400>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ status = "disabled";
+ };
+
+ timers15: timer@44006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44006000 0x400>;
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@44007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44007000 0x400>;
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@44008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44008000 0x400>;
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
+ dma1: dma@48000000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48000000 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc DMA1>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ };
+
+ dma2: dma@48001000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48001000 0x400>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc DMA2>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ };
+
+ dmamux1: dma-router@48002000 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x48002000 0x1c>;
+ #dma-cells = <3>;
+ dma-requests = <128>;
+ dma-masters = <&dma1 &dma2>;
+ dma-channels = <16>;
+ clocks = <&rcc DMAMUX>;
+ };
+
+ sdmmc3: sdmmc@48004000 {
+ compatible = "st,stm32-sdmmc2";
+ reg = <0x48004000 0x400>, <0x48005000 0x400>;
+ reg-names = "sdmmc", "delay";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_NONE>;
+ clocks = <&rcc SDMMC3_K>;
+ resets = <&rcc SDMMC3_R>;
+ st,idma = <1>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ rcc: rcc@50000000 {
+ compatible = "st,stm32mp1-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ rcc_reboot: rcc-reboot@50000000 {
+ compatible = "syscon-reboot";
+ regmap = <&rcc>;
+ offset = <0x404>;
+ mask = <0x1>;
+ };
+
+ pwr: pwr@50001000 {
+ compatible = "st,stm32mp1-pwr", "st,stm32-pwr", "syscon", "simple-mfd";
+ reg = <0x50001000 0x400>;
+ system-power-controller;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ st,sysrcc = <&rcc>;
+ clocks = <&rcc PLL2_R>;
+ clock-names = "phyclk";
+
+ pwr-regulators@c {
+ compatible = "st,stm32mp1,pwr-reg";
+ st,tzcr = <&rcc 0x0 0x1>;
+
+ reg11: reg11 {
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ reg18: reg18 {
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ usb33: usb33 {
+ regulator-name = "usb33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ exti: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+ };
+
+ syscfg: system-config@50020000 {
+ compatible = "st,stm32-syscfg", "syscon";
+ reg = <0x50020000 0x400>;
+ };
+
+ lptimer2: timer@50021000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50021000 0x400>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@50022000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50022000 0x400>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ lptimer4: timer@50023000 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x50023000 0x400>;
+ clocks = <&rcc LPTIM4_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ lptimer5: timer@50024000 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x50024000 0x400>;
+ clocks = <&rcc LPTIM5_K>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ vrefbuf: vrefbuf@50025000 {
+ compatible = "st,stm32-vrefbuf";
+ reg = <0x50025000 0x8>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2500000>;
+ clocks = <&rcc VREF>;
+ status = "disabled";
+ };
+
+ cryp1: cryp@54001000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54001000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
+ };
+
+ rng1: rng@54003000 {
+ compatible = "st,stm32-rng";
+ reg = <0x54003000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ status = "disabled";
+ };
+
+ mdma1: dma@58000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x58000000 0x1000>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc MDMA>;
+ #dma-cells = <5>;
+ dma-channels = <32>;
+ dma-requests = <48>;
+ };
+
+ qspi: qspi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
+ sdmmc1: sdmmc@58005000 {
+ compatible = "st,stm32-sdmmc2";
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ reg-names = "sdmmc", "delay";
+ clocks = <&rcc SDMMC1_K>;
+ resets = <&rcc SDMMC1_R>;
+ st,idma = <1>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: sdmmc@58007000 {
+ compatible = "st,stm32-sdmmc2";
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ reg-names = "sdmmc", "delay";
+ interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+ clocks = <&rcc SDMMC2_K>;
+ resets = <&rcc SDMMC2_R>;
+ st,idma = <1>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ crc1: crc@58009000 {
+ compatible = "st,stm32f7-crc";
+ reg = <0x58009000 0x400>;
+ clocks = <&rcc CRC1>;
+ status = "disabled";
+ };
+
+ usbh_ohci: usbh-ohci@5800c000 {
+ compatible = "generic-ohci";
+ reg = <0x5800c000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ usbh_ehci: usbh-ehci@5800d000 {
+ compatible = "generic-ehci";
+ reg = <0x5800d000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ companion = <&usbh_ohci>;
+ status = "disabled";
+ };
+
+ dsi: dsi@5a000000 {
+ compatible = "st,stm32-dsi";
+ reg = <0x5a000000 0x800>;
+ clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+ clock-names = "pclk", "ref", "px_clk";
+ resets = <&rcc DSI_R>;
+ reset-names = "apb";
+ status = "disabled";
+ };
+
+ ltdc: display-controller@5a001000 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x5a001000 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LTDC_PX>;
+ clock-names = "lcd";
+ resets = <&rcc LTDC_R>;
+ status = "disabled";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+
+ usart1: serial@5c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x5c000000 0x400>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@5c002000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x5c002000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@5c009000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x5c009000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C6_K>;
+ resets = <&rcc I2C6_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+};
/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */
/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
* Author: Gabriel Fernandez <gabriel.fernandez@st.com> for STMicroelectronics.
*/
+
+#ifndef _DT_BINDINGS_STM32MP1_CLKS_H_
+#define _DT_BINDINGS_STM32MP1_CLKS_H_
+
/* OSCILLATOR clocks */
-#define CK_HSE 0
-#define CK_CSI 1
-#define CK_LSI 2
-#define CK_LSE 3
-#define CK_HSI 4
-#define CK_HSE_DIV2 5
+#define CK_HSE 0
+#define CK_CSI 1
+#define CK_LSI 2
+#define CK_LSE 3
+#define CK_HSI 4
+#define CK_HSE_DIV2 5
/* Bus clocks */
-#define TIM2 6
-#define TIM3 7
-#define TIM4 8
-#define TIM5 9
-#define TIM6 10
-#define TIM7 11
-#define TIM12 12
-#define TIM13 13
-#define TIM14 14
-#define LPTIM1 15
-#define SPI2 16
-#define SPI3 17
-#define USART2 18
-#define USART3 19
-#define UART4 20
-#define UART5 21
-#define UART7 22
-#define UART8 23
-#define I2C1 24
-#define I2C2 25
-#define I2C3 26
-#define I2C5 27
-#define SPDIF 28
-#define CEC 29
-#define DAC12 30
-#define MDIO 31
-#define TIM1 32
-#define TIM8 33
-#define TIM15 34
-#define TIM16 35
-#define TIM17 36
-#define SPI1 37
-#define SPI4 38
-#define SPI5 39
-#define USART6 40
-#define SAI1 41
-#define SAI2 42
-#define SAI3 43
-#define DFSDM 44
-#define FDCAN 45
-#define LPTIM2 46
-#define LPTIM3 47
-#define LPTIM4 48
-#define LPTIM5 49
-#define SAI4 50
-#define SYSCFG 51
-#define VREF 52
-#define TMPSENS 53
-#define PMBCTRL 54
-#define HDP 55
-#define LTDC 56
-#define DSI 57
-#define IWDG2 58
-#define USBPHY 59
-#define STGENRO 60
-#define SPI6 61
-#define I2C4 62
-#define I2C6 63
-#define USART1 64
-#define RTCAPB 65
-#define TZC 66
-#define TZPC 67
-#define IWDG1 68
-#define BSEC 69
-#define STGEN 70
-#define DMA1 71
-#define DMA2 72
-#define DMAMUX 73
-#define ADC12 74
-#define USBO 75
-#define SDMMC3 76
-#define DCMI 77
-#define CRYP2 78
-#define HASH2 79
-#define RNG2 80
-#define CRC2 81
-#define HSEM 82
-#define IPCC 83
-#define GPIOA 84
-#define GPIOB 85
-#define GPIOC 86
-#define GPIOD 87
-#define GPIOE 88
-#define GPIOF 89
-#define GPIOG 90
-#define GPIOH 91
-#define GPIOI 92
-#define GPIOJ 93
-#define GPIOK 94
-#define GPIOZ 95
-#define CRYP1 96
-#define HASH1 97
-#define RNG1 98
-#define BKPSRAM 99
-#define MDMA 100
-#define DMA2D 101
-#define GPU 102
-#define ETHCK 103
-#define ETHTX 104
-#define ETHRX 105
-#define ETHMAC 106
-#define FMC 107
-#define QSPI 108
-#define SDMMC1 109
-#define SDMMC2 110
-#define CRC1 111
-#define USBH 112
-#define ETHSTP 113
+#define TIM2 6
+#define TIM3 7
+#define TIM4 8
+#define TIM5 9
+#define TIM6 10
+#define TIM7 11
+#define TIM12 12
+#define TIM13 13
+#define TIM14 14
+#define LPTIM1 15
+#define SPI2 16
+#define SPI3 17
+#define USART2 18
+#define USART3 19
+#define UART4 20
+#define UART5 21
+#define UART7 22
+#define UART8 23
+#define I2C1 24
+#define I2C2 25
+#define I2C3 26
+#define I2C5 27
+#define SPDIF 28
+#define CEC 29
+#define DAC12 30
+#define MDIO 31
+#define TIM1 32
+#define TIM8 33
+#define TIM15 34
+#define TIM16 35
+#define TIM17 36
+#define SPI1 37
+#define SPI4 38
+#define SPI5 39
+#define USART6 40
+#define SAI1 41
+#define SAI2 42
+#define SAI3 43
+#define DFSDM 44
+#define FDCAN 45
+#define LPTIM2 46
+#define LPTIM3 47
+#define LPTIM4 48
+#define LPTIM5 49
+#define SAI4 50
+#define SYSCFG 51
+#define VREF 52
+#define TMPSENS 53
+#define PMBCTRL 54
+#define HDP 55
+#define LTDC 56
+#define DSI 57
+#define IWDG2 58
+#define USBPHY 59
+#define STGENRO 60
+#define SPI6 61
+#define I2C4 62
+#define I2C6 63
+#define USART1 64
+#define RTCAPB 65
+#define TZC1 66
+#define TZPC 67
+#define IWDG1 68
+#define BSEC 69
+#define STGEN 70
+#define DMA1 71
+#define DMA2 72
+#define DMAMUX 73
+#define ADC12 74
+#define USBO 75
+#define SDMMC3 76
+#define DCMI 77
+#define CRYP2 78
+#define HASH2 79
+#define RNG2 80
+#define CRC2 81
+#define HSEM 82
+#define IPCC 83
+#define GPIOA 84
+#define GPIOB 85
+#define GPIOC 86
+#define GPIOD 87
+#define GPIOE 88
+#define GPIOF 89
+#define GPIOG 90
+#define GPIOH 91
+#define GPIOI 92
+#define GPIOJ 93
+#define GPIOK 94
+#define GPIOZ 95
+#define CRYP1 96
+#define HASH1 97
+#define RNG1 98
+#define BKPSRAM 99
+#define MDMA 100
+#define GPU 101
+#define ETHCK 102
+#define ETHTX 103
+#define ETHRX 104
+#define ETHMAC 105
+#define FMC 106
+#define QSPI 107
+#define SDMMC1 108
+#define SDMMC2 109
+#define CRC1 110
+#define USBH 111
+#define ETHSTP 112
+#define TZC2 113
/* Kernel clocks */
-#define SDMMC1_K 114
-#define SDMMC2_K 115
-#define SDMMC3_K 116
-#define FMC_K 117
-#define QSPI_K 118
-#define ETHMAC_K 119
-#define RNG1_K 120
-#define RNG2_K 121
-#define GPU_K 122
-#define USBPHY_K 123
-#define STGEN_K 124
-#define SPDIF_K 125
-#define SPI1_K 126
-#define SPI2_K 127
-#define SPI3_K 128
-#define SPI4_K 129
-#define SPI5_K 130
-#define SPI6_K 131
-#define CEC_K 132
-#define I2C1_K 133
-#define I2C2_K 134
-#define I2C3_K 135
-#define I2C4_K 136
-#define I2C5_K 137
-#define I2C6_K 138
-#define LPTIM1_K 139
-#define LPTIM2_K 140
-#define LPTIM3_K 141
-#define LPTIM4_K 142
-#define LPTIM5_K 143
-#define USART1_K 144
-#define USART2_K 145
-#define USART3_K 146
-#define UART4_K 147
-#define UART5_K 148
-#define USART6_K 149
-#define UART7_K 150
-#define UART8_K 151
-#define DFSDM_K 152
-#define FDCAN_K 153
-#define SAI1_K 154
-#define SAI2_K 155
-#define SAI3_K 156
-#define SAI4_K 157
-#define ADC12_K 158
-#define DSI_K 159
-#define ADFSDM_K 160
-#define USBO_K 161
-#define LTDC_K 162
+#define SDMMC1_K 118
+#define SDMMC2_K 119
+#define SDMMC3_K 120
+#define FMC_K 121
+#define QSPI_K 122
+#define ETHCK_K 123
+#define RNG1_K 124
+#define RNG2_K 125
+#define GPU_K 126
+#define USBPHY_K 127
+#define STGEN_K 128
+#define SPDIF_K 129
+#define SPI1_K 130
+#define SPI2_K 131
+#define SPI3_K 132
+#define SPI4_K 133
+#define SPI5_K 134
+#define SPI6_K 135
+#define CEC_K 136
+#define I2C1_K 137
+#define I2C2_K 138
+#define I2C3_K 139
+#define I2C4_K 140
+#define I2C5_K 141
+#define I2C6_K 142
+#define LPTIM1_K 143
+#define LPTIM2_K 144
+#define LPTIM3_K 145
+#define LPTIM4_K 146
+#define LPTIM5_K 147
+#define USART1_K 148
+#define USART2_K 149
+#define USART3_K 150
+#define UART4_K 151
+#define UART5_K 152
+#define USART6_K 153
+#define UART7_K 154
+#define UART8_K 155
+#define DFSDM_K 156
+#define FDCAN_K 157
+#define SAI1_K 158
+#define SAI2_K 159
+#define SAI3_K 160
+#define SAI4_K 161
+#define ADC12_K 162
+#define DSI_K 163
+#define DSI_PX 164
+#define ADFSDM_K 165
+#define USBO_K 166
+#define LTDC_PX 167
+#define DAC12_K 168
+#define ETHPTP_K 169
/* PLL */
-#define PLL1 163
-#define PLL2 164
-#define PLL3 165
-#define PLL4 166
+#define PLL1 176
+#define PLL2 177
+#define PLL3 178
+#define PLL4 179
/* ODF */
-#define PLL1_P 167
-#define PLL1_Q 168
-#define PLL1_R 169
-#define PLL2_P 170
-#define PLL2_Q 171
-#define PLL2_R 172
-#define PLL3_P 173
-#define PLL3_Q 174
-#define PLL3_R 175
-#define PLL4_P 176
-#define PLL4_Q 177
-#define PLL4_R 178
+#define PLL1_P 180
+#define PLL1_Q 181
+#define PLL1_R 182
+#define PLL2_P 183
+#define PLL2_Q 184
+#define PLL2_R 185
+#define PLL3_P 186
+#define PLL3_Q 187
+#define PLL3_R 188
+#define PLL4_P 189
+#define PLL4_Q 190
+#define PLL4_R 191
/* AUX */
-#define RTC 179
+#define RTC 192
/* MCLK */
-#define CK_PER 180
-#define CK_MPU 181
-#define CK_AXI 182
-#define CK_MCU 183
+#define CK_PER 193
+#define CK_MPU 194
+#define CK_AXI 195
+#define CK_MCU 196
/* Time base */
-#define TIM2_K 184
-#define TIM3_K 185
-#define TIM4_K 186
-#define TIM5_K 187
-#define TIM6_K 188
-#define TIM7_K 189
-#define TIM12_K 190
-#define TIM13_K 191
-#define TIM14_K 192
-#define TIM1_K 193
-#define TIM8_K 194
-#define TIM15_K 195
-#define TIM16_K 196
-#define TIM17_K 197
+#define TIM2_K 197
+#define TIM3_K 198
+#define TIM4_K 199
+#define TIM5_K 200
+#define TIM6_K 201
+#define TIM7_K 202
+#define TIM12_K 203
+#define TIM13_K 204
+#define TIM14_K 205
+#define TIM1_K 206
+#define TIM8_K 207
+#define TIM15_K 208
+#define TIM16_K 209
+#define TIM17_K 210
/* MCO clocks */
-#define CK_MCO1 198
-#define CK_MCO2 199
+#define CK_MCO1 211
+#define CK_MCO2 212
/* TRACE & DEBUG clocks */
-#define DBG 200
-#define CK_DBG 201
-#define CK_TRACE 202
+#define CK_DBG 214
+#define CK_TRACE 215
/* DDR */
-#define DDRC1 203
-#define DDRC1LP 204
-#define DDRC2 205
-#define DDRC2LP 206
-#define DDRPHYC 207
-#define DDRPHYCLP 208
-#define DDRCAPB 209
-#define DDRCAPBLP 210
-#define AXIDCG 211
-#define DDRPHYCAPB 212
-#define DDRPHYCAPBLP 213
-#define DDRPERFM 214
+#define DDRC1 220
+#define DDRC1LP 221
+#define DDRC2 222
+#define DDRC2LP 223
+#define DDRPHYC 224
+#define DDRPHYCLP 225
+#define DDRCAPB 226
+#define DDRCAPBLP 227
+#define AXIDCG 228
+#define DDRPHYCAPB 229
+#define DDRPHYCAPBLP 230
+#define DDRPERFM 231
+
+#define STM32MP1_LAST_CLK 232
+
+#define LTDC_K LTDC_PX
+#define ETHMAC_K ETHCK_K
-#define STM32MP1_LAST_CLK 215
+#endif /* _DT_BINDINGS_STM32MP1_CLKS_H_ */
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Torgue Alexandre <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
#ifndef _DT_BINDINGS_STM32_PINFUNC_H
#define _DT_BINDINGS_STM32_PINFUNC_H
+++ /dev/null
-#define LTDC_R 3072
-#define DSI_R 3076
-#define DDRPERFM_R 3080
-#define USBPHY_R 3088
-#define SPI6_R 3136
-#define I2C4_R 3138
-#define I2C6_R 3139
-#define USART1_R 3140
-#define STGEN_R 3156
-#define GPIOZ_R 3200
-#define CRYP1_R 3204
-#define HASH1_R 3205
-#define RNG1_R 3206
-#define AXIM_R 3216
-#define GPU_R 3269
-#define ETHMAC_R 3274
-#define FMC_R 3276
-#define QSPI_R 3278
-#define SDMMC1_R 3280
-#define SDMMC2_R 3281
-#define CRC1_R 3284
-#define USBH_R 3288
-#define MDMA_R 3328
-#define MCU_R 8225
-#define TIM2_R 19456
-#define TIM3_R 19457
-#define TIM4_R 19458
-#define TIM5_R 19459
-#define TIM6_R 19460
-#define TIM7_R 19461
-#define TIM12_R 16462
-#define TIM13_R 16463
-#define TIM14_R 16464
-#define LPTIM1_R 19465
-#define SPI2_R 19467
-#define SPI3_R 19468
-#define USART2_R 19470
-#define USART3_R 19471
-#define UART4_R 19472
-#define UART5_R 19473
-#define UART7_R 19474
-#define UART8_R 19475
-#define I2C1_R 19477
-#define I2C2_R 19478
-#define I2C3_R 19479
-#define I2C5_R 19480
-#define SPDIF_R 19482
-#define CEC_R 19483
-#define DAC12_R 19485
-#define MDIO_R 19847
-#define TIM1_R 19520
-#define TIM8_R 19521
-#define TIM15_R 19522
-#define TIM16_R 19523
-#define TIM17_R 19524
-#define SPI1_R 19528
-#define SPI4_R 19529
-#define SPI5_R 19530
-#define USART6_R 19533
-#define SAI1_R 19536
-#define SAI2_R 19537
-#define SAI3_R 19538
-#define DFSDM_R 19540
-#define FDCAN_R 19544
-#define LPTIM2_R 19584
-#define LPTIM3_R 19585
-#define LPTIM4_R 19586
-#define LPTIM5_R 19587
-#define SAI4_R 19592
-#define SYSCFG_R 19595
-#define VREF_R 19597
-#define TMPSENS_R 19600
-#define PMBCTRL_R 19601
-#define DMA1_R 19648
-#define DMA2_R 19649
-#define DMAMUX_R 19650
-#define ADC12_R 19653
-#define USBO_R 19656
-#define SDMMC3_R 19664
-#define CAMITF_R 19712
-#define CRYP2_R 19716
-#define HASH2_R 19717
-#define RNG2_R 19718
-#define CRC2_R 19719
-#define HSEM_R 19723
-#define MBOX_R 19724
-#define GPIOA_R 19776
-#define GPIOB_R 19777
-#define GPIOC_R 19778
-#define GPIOD_R 19779
-#define GPIOE_R 19780
-#define GPIOF_R 19781
-#define GPIOG_R 19782
-#define GPIOH_R 19783
-#define GPIOI_R 19784
-#define GPIOJ_R 19785
-#define GPIOK_R 19786
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for STMicroelectronics.
+ */
+
+#ifndef _DT_BINDINGS_STM32MP1_RESET_H_
+#define _DT_BINDINGS_STM32MP1_RESET_H_
+
+#define LTDC_R 3072
+#define DSI_R 3076
+#define DDRPERFM_R 3080
+#define USBPHY_R 3088
+#define SPI6_R 3136
+#define I2C4_R 3138
+#define I2C6_R 3139
+#define USART1_R 3140
+#define STGEN_R 3156
+#define GPIOZ_R 3200
+#define CRYP1_R 3204
+#define HASH1_R 3205
+#define RNG1_R 3206
+#define AXIM_R 3216
+#define GPU_R 3269
+#define ETHMAC_R 3274
+#define FMC_R 3276
+#define QSPI_R 3278
+#define SDMMC1_R 3280
+#define SDMMC2_R 3281
+#define CRC1_R 3284
+#define USBH_R 3288
+#define MDMA_R 3328
+#define MCU_R 8225
+#define TIM2_R 19456
+#define TIM3_R 19457
+#define TIM4_R 19458
+#define TIM5_R 19459
+#define TIM6_R 19460
+#define TIM7_R 19461
+#define TIM12_R 16462
+#define TIM13_R 16463
+#define TIM14_R 16464
+#define LPTIM1_R 19465
+#define SPI2_R 19467
+#define SPI3_R 19468
+#define USART2_R 19470
+#define USART3_R 19471
+#define UART4_R 19472
+#define UART5_R 19473
+#define UART7_R 19474
+#define UART8_R 19475
+#define I2C1_R 19477
+#define I2C2_R 19478
+#define I2C3_R 19479
+#define I2C5_R 19480
+#define SPDIF_R 19482
+#define CEC_R 19483
+#define DAC12_R 19485
+#define MDIO_R 19847
+#define TIM1_R 19520
+#define TIM8_R 19521
+#define TIM15_R 19522
+#define TIM16_R 19523
+#define TIM17_R 19524
+#define SPI1_R 19528
+#define SPI4_R 19529
+#define SPI5_R 19530
+#define USART6_R 19533
+#define SAI1_R 19536
+#define SAI2_R 19537
+#define SAI3_R 19538
+#define DFSDM_R 19540
+#define FDCAN_R 19544
+#define LPTIM2_R 19584
+#define LPTIM3_R 19585
+#define LPTIM4_R 19586
+#define LPTIM5_R 19587
+#define SAI4_R 19592
+#define SYSCFG_R 19595
+#define VREF_R 19597
+#define TMPSENS_R 19600
+#define PMBCTRL_R 19601
+#define DMA1_R 19648
+#define DMA2_R 19649
+#define DMAMUX_R 19650
+#define ADC12_R 19653
+#define USBO_R 19656
+#define SDMMC3_R 19664
+#define CAMITF_R 19712
+#define CRYP2_R 19716
+#define HASH2_R 19717
+#define RNG2_R 19718
+#define CRC2_R 19719
+#define HSEM_R 19723
+#define MBOX_R 19724
+#define GPIOA_R 19776
+#define GPIOB_R 19777
+#define GPIOC_R 19778
+#define GPIOD_R 19779
+#define GPIOE_R 19780
+#define GPIOF_R 19781
+#define GPIOG_R 19782
+#define GPIOH_R 19783
+#define GPIOI_R 19784
+#define GPIOJ_R 19785
+#define GPIOK_R 19786
+
+#endif /* _DT_BINDINGS_STM32MP1_RESET_H_ */
projects / uboot.git / commitdiff