]> git.baikalelectronics.ru Git - kernel.git/commitdiff
drm: bridge: Add TI DLPC3433 DSI to DMD bridge
authorJagan Teki <jagan@amarulasolutions.com>
Fri, 3 Jun 2022 14:03:49 +0000 (19:33 +0530)
committerRobert Foss <robert.foss@linaro.org>
Fri, 3 Jun 2022 14:23:31 +0000 (16:23 +0200)
TI DLPC3433 is a MIPI DSI based display controller bridge
for processing high resolution DMD based projectors.

It has a flexible configuration of MIPI DSI and DPI signal
input that produces a DMD output in RGB565, RGB666, RGB888
formats.

It supports upto 720p resolution with 60 and 120 Hz refresh
rates.

Add bridge driver for it.

Signed-off-by: Christopher Vollo <chris@renewoutreach.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603140349.3563612-2-jagan@amarulasolutions.com
MAINTAINERS
drivers/gpu/drm/bridge/Kconfig
drivers/gpu/drm/bridge/Makefile
drivers/gpu/drm/bridge/ti-dlpc3433.c [new file with mode: 0644]

index aea0fe5156afc3e32c72d97322955b576a27429c..ede21cc48708d182971a34eff4f572fa25a4ee6a 100644 (file)
@@ -6435,6 +6435,7 @@ DRM DRIVER FOR TI DLPC3433 MIPI DSI TO DMD BRIDGE
 M:     Jagan Teki <jagan@amarulasolutions.com>
 S:     Maintained
 F:     Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
+F:     drivers/gpu/drm/bridge/ti-dlpc3433.c
 
 DRM DRIVER FOR TI SN65DSI86 BRIDGE CHIP
 R:     Douglas Anderson <dianders@chromium.org>
index 146ab069838fe97acab970acc60eedef78bc38b2..4b28f939fff6e130869ed847b69fe872223092a2 100644 (file)
@@ -321,6 +321,22 @@ config DRM_TOSHIBA_TC358775
        help
          Toshiba TC358775 DSI/LVDS bridge chip driver.
 
+config DRM_TI_DLPC3433
+       tristate "TI DLPC3433 Display controller"
+       depends on DRM && DRM_PANEL
+       depends on OF
+       select DRM_MIPI_DSI
+       help
+         TI DLPC3433 is a MIPI DSI based display controller bridge
+         for processing high resolution DMD based projectors.
+
+         It has a flexible configuration of MIPI DSI and DPI signal
+         input that produces a DMD output in RGB565, RGB666, RGB888
+         formats.
+
+         It supports upto 720p resolution with 60 and 120 Hz refresh
+         rates.
+
 config DRM_TI_TFP410
        tristate "TI TFP410 DVI/HDMI bridge"
        depends on OF
index f6c0a95de5497caa77852ef774a90967cb13293d..043b499545e3f5ab87a3a43fd663664e118e501b 100644 (file)
@@ -26,6 +26,7 @@ obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
 obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o
 obj-$(CONFIG_DRM_TOSHIBA_TC358775) += tc358775.o
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
+obj-$(CONFIG_DRM_TI_DLPC3433) += ti-dlpc3433.o
 obj-$(CONFIG_DRM_TI_SN65DSI83) += ti-sn65dsi83.o
 obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
 obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
diff --git a/drivers/gpu/drm/bridge/ti-dlpc3433.c b/drivers/gpu/drm/bridge/ti-dlpc3433.c
new file mode 100644 (file)
index 0000000..06e5197
--- /dev/null
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 RenewOutReach
+ * Copyright (C) 2021 Amarula Solutions(India)
+ *
+ * Author:
+ * Jagan Teki <jagan@amarulasolutions.com>
+ * Christopher Vollo <chris@renewoutreach.org>
+ */
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_print.h>
+#include <drm/drm_mipi_dsi.h>
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+enum cmd_registers {
+       WR_INPUT_SOURCE         = 0x05, /* Write Input Source Select */
+       WR_EXT_SOURCE_FMT       = 0x07, /* Write External Video Source Format */
+       WR_IMAGE_CROP           = 0x10, /* Write Image Crop */
+       WR_DISPLAY_SIZE         = 0x12, /* Write Display Size */
+       WR_IMAGE_FREEZE         = 0x1A, /* Write Image Freeze */
+       WR_INPUT_IMAGE_SIZE     = 0x2E, /* Write External Input Image Size */
+       WR_RGB_LED_EN           = 0x52, /* Write RGB LED Enable */
+       WR_RGB_LED_CURRENT      = 0x54, /* Write RGB LED Current */
+       WR_RGB_LED_MAX_CURRENT  = 0x5C, /* Write RGB LED Max Current */
+       WR_DSI_HS_CLK           = 0xBD, /* Write DSI HS Clock */
+       RD_DEVICE_ID            = 0xD4, /* Read Controller Device ID */
+       WR_DSI_PORT_EN          = 0xD7, /* Write DSI Port Enable */
+};
+
+enum input_source {
+       INPUT_EXTERNAL_VIDEO    = 0,
+       INPUT_TEST_PATTERN,
+       INPUT_SPLASH_SCREEN,
+};
+
+#define DEV_ID_MASK            GENMASK(3, 0)
+#define IMAGE_FREESE_EN                BIT(0)
+#define DSI_PORT_EN            0
+#define EXT_SOURCE_FMT_DSI     0
+#define RED_LED_EN             BIT(0)
+#define GREEN_LED_EN           BIT(1)
+#define BLUE_LED_EN            BIT(2)
+#define LED_MASK               GENMASK(2, 0)
+#define MAX_BYTE_SIZE          8
+
+struct dlpc {
+       struct device           *dev;
+       struct drm_bridge       bridge;
+       struct drm_bridge       *next_bridge;
+       struct device_node      *host_node;
+       struct mipi_dsi_device  *dsi;
+       struct drm_display_mode mode;
+
+       struct gpio_desc        *enable_gpio;
+       struct regulator        *vcc_intf;
+       struct regulator        *vcc_flsh;
+       struct regmap           *regmap;
+       unsigned int            dsi_lanes;
+};
+
+static inline struct dlpc *bridge_to_dlpc(struct drm_bridge *bridge)
+{
+       return container_of(bridge, struct dlpc, bridge);
+}
+
+static bool dlpc_writeable_noinc_reg(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case WR_IMAGE_CROP:
+       case WR_DISPLAY_SIZE:
+       case WR_INPUT_IMAGE_SIZE:
+       case WR_DSI_HS_CLK:
+               return true;
+       default:
+               return false;
+       }
+}
+
+static const struct regmap_range dlpc_volatile_ranges[] = {
+       { .range_min = 0x10, .range_max = 0xBF },
+};
+
+static const struct regmap_access_table dlpc_volatile_table = {
+       .yes_ranges = dlpc_volatile_ranges,
+       .n_yes_ranges = ARRAY_SIZE(dlpc_volatile_ranges),
+};
+
+static struct regmap_config dlpc_regmap_config = {
+       .reg_bits               = 8,
+       .val_bits               = 8,
+       .max_register           = WR_DSI_PORT_EN,
+       .writeable_noinc_reg    = dlpc_writeable_noinc_reg,
+       .volatile_table         = &dlpc_volatile_table,
+       .cache_type             = REGCACHE_RBTREE,
+       .name                   = "dlpc3433",
+};
+
+static void dlpc_atomic_enable(struct drm_bridge *bridge,
+                              struct drm_bridge_state *old_bridge_state)
+{
+       struct dlpc *dlpc = bridge_to_dlpc(bridge);
+       struct device *dev = dlpc->dev;
+       struct drm_display_mode *mode = &dlpc->mode;
+       struct regmap *regmap = dlpc->regmap;
+       char buf[MAX_BYTE_SIZE];
+       unsigned int devid;
+
+       regmap_read(regmap, RD_DEVICE_ID, &devid);
+       devid &= DEV_ID_MASK;
+
+       DRM_DEV_DEBUG(dev, "DLPC3433 device id: 0x%02x\n", devid);
+
+       if (devid != 0x01) {
+               DRM_DEV_ERROR(dev, "Unsupported DLPC device id: 0x%02x\n", devid);
+               return;
+       }
+
+       /* disable image freeze */
+       regmap_write(regmap, WR_IMAGE_FREEZE, IMAGE_FREESE_EN);
+
+       /* enable DSI port */
+       regmap_write(regmap, WR_DSI_PORT_EN, DSI_PORT_EN);
+
+       memset(buf, 0, MAX_BYTE_SIZE);
+
+       /* set image crop */
+       buf[4] = mode->hdisplay & 0xff;
+       buf[5] = (mode->hdisplay & 0xff00) >> 8;
+       buf[6] = mode->vdisplay & 0xff;
+       buf[7] = (mode->vdisplay & 0xff00) >> 8;
+       regmap_noinc_write(regmap, WR_IMAGE_CROP, buf, MAX_BYTE_SIZE);
+
+       /* set display size */
+       buf[4] = mode->hdisplay & 0xff;
+       buf[5] = (mode->hdisplay & 0xff00) >> 8;
+       buf[6] = mode->vdisplay & 0xff;
+       buf[7] = (mode->vdisplay & 0xff00) >> 8;
+       regmap_noinc_write(regmap, WR_DISPLAY_SIZE, buf, MAX_BYTE_SIZE);
+
+       /* set input image size */
+       buf[0] = mode->hdisplay & 0xff;
+       buf[1] = (mode->hdisplay & 0xff00) >> 8;
+       buf[2] = mode->vdisplay & 0xff;
+       buf[3] = (mode->vdisplay & 0xff00) >> 8;
+       regmap_noinc_write(regmap, WR_INPUT_IMAGE_SIZE, buf, 4);
+
+       /* set external video port */
+       regmap_write(regmap, WR_INPUT_SOURCE, INPUT_EXTERNAL_VIDEO);
+
+       /* set external video format select as DSI */
+       regmap_write(regmap, WR_EXT_SOURCE_FMT, EXT_SOURCE_FMT_DSI);
+
+       /* disable image freeze */
+       regmap_write(regmap, WR_IMAGE_FREEZE, 0x00);
+
+       /* enable RGB led */
+       regmap_update_bits(regmap, WR_RGB_LED_EN, LED_MASK,
+                          RED_LED_EN | GREEN_LED_EN | BLUE_LED_EN);
+
+       msleep(10);
+}
+
+static void dlpc_atomic_pre_enable(struct drm_bridge *bridge,
+                                  struct drm_bridge_state *old_bridge_state)
+{
+       struct dlpc *dlpc = bridge_to_dlpc(bridge);
+       int ret;
+
+       gpiod_set_value(dlpc->enable_gpio, 1);
+
+       msleep(500);
+
+       ret = regulator_enable(dlpc->vcc_intf);
+       if (ret)
+               DRM_DEV_ERROR(dlpc->dev,
+                             "failed to enable VCC_INTF regulator: %d\n", ret);
+
+       ret = regulator_enable(dlpc->vcc_flsh);
+       if (ret)
+               DRM_DEV_ERROR(dlpc->dev,
+                             "failed to enable VCC_FLSH regulator: %d\n", ret);
+
+       msleep(10);
+}
+
+static void dlpc_atomic_post_disable(struct drm_bridge *bridge,
+                                    struct drm_bridge_state *old_bridge_state)
+{
+       struct dlpc *dlpc = bridge_to_dlpc(bridge);
+
+       regulator_disable(dlpc->vcc_flsh);
+       regulator_disable(dlpc->vcc_intf);
+
+       msleep(10);
+
+       gpiod_set_value(dlpc->enable_gpio, 0);
+
+       msleep(500);
+}
+
+#define MAX_INPUT_SEL_FORMATS  1
+
+static u32 *
+dlpc_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+                              struct drm_bridge_state *bridge_state,
+                              struct drm_crtc_state *crtc_state,
+                              struct drm_connector_state *conn_state,
+                              u32 output_fmt,
+                              unsigned int *num_input_fmts)
+{
+       u32 *input_fmts;
+
+       *num_input_fmts = 0;
+
+       input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
+                            GFP_KERNEL);
+       if (!input_fmts)
+               return NULL;
+
+       /* This is the DSI-end bus format */
+       input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
+       *num_input_fmts = 1;
+
+       return input_fmts;
+}
+
+static void dlpc_mode_set(struct drm_bridge *bridge,
+                         const struct drm_display_mode *mode,
+                         const struct drm_display_mode *adjusted_mode)
+{
+       struct dlpc *dlpc = bridge_to_dlpc(bridge);
+
+       drm_mode_copy(&dlpc->mode, adjusted_mode);
+}
+
+static int dlpc_attach(struct drm_bridge *bridge,
+                      enum drm_bridge_attach_flags flags)
+{
+       struct dlpc *dlpc = bridge_to_dlpc(bridge);
+
+       return drm_bridge_attach(bridge->encoder, dlpc->next_bridge, bridge, flags);
+}
+
+static const struct drm_bridge_funcs dlpc_bridge_funcs = {
+       .atomic_duplicate_state         = drm_atomic_helper_bridge_duplicate_state,
+       .atomic_destroy_state           = drm_atomic_helper_bridge_destroy_state,
+       .atomic_get_input_bus_fmts      = dlpc_atomic_get_input_bus_fmts,
+       .atomic_reset                   = drm_atomic_helper_bridge_reset,
+       .atomic_pre_enable              = dlpc_atomic_pre_enable,
+       .atomic_enable                  = dlpc_atomic_enable,
+       .atomic_post_disable            = dlpc_atomic_post_disable,
+       .mode_set                       = dlpc_mode_set,
+       .attach                         = dlpc_attach,
+};
+
+static int dlpc3433_parse_dt(struct dlpc *dlpc)
+{
+       struct device *dev = dlpc->dev;
+       struct device_node *endpoint;
+       int ret;
+
+       dlpc->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+       if (IS_ERR(dlpc->enable_gpio))
+               return PTR_ERR(dlpc->enable_gpio);
+
+       dlpc->vcc_intf = devm_regulator_get(dlpc->dev, "vcc_intf");
+       if (IS_ERR(dlpc->vcc_intf))
+               return dev_err_probe(dev, PTR_ERR(dlpc->vcc_intf),
+                                    "failed to get VCC_INTF supply\n");
+
+       dlpc->vcc_flsh = devm_regulator_get(dlpc->dev, "vcc_flsh");
+       if (IS_ERR(dlpc->vcc_flsh))
+               return dev_err_probe(dev, PTR_ERR(dlpc->vcc_flsh),
+                                    "failed to get VCC_FLSH supply\n");
+
+       dlpc->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
+       if (IS_ERR(dlpc->next_bridge))
+               return PTR_ERR(dlpc->next_bridge);
+
+       endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);
+       dlpc->dsi_lanes = of_property_count_u32_elems(endpoint, "data-lanes");
+       if (dlpc->dsi_lanes < 0 || dlpc->dsi_lanes > 4) {
+               ret = -EINVAL;
+               goto err_put_endpoint;
+       }
+
+       dlpc->host_node = of_graph_get_remote_port_parent(endpoint);
+       if (!dlpc->host_node) {
+               ret = -ENODEV;
+               goto err_put_host;
+       }
+
+       of_node_put(endpoint);
+
+       return 0;
+
+err_put_host:
+       of_node_put(dlpc->host_node);
+err_put_endpoint:
+       of_node_put(endpoint);
+       return ret;
+}
+
+static int dlpc_host_attach(struct dlpc *dlpc)
+{
+       struct device *dev = dlpc->dev;
+       struct mipi_dsi_host *host;
+       struct mipi_dsi_device_info info = {
+               .type = "dlpc3433",
+               .channel = 0,
+               .node = NULL,
+       };
+
+       host = of_find_mipi_dsi_host_by_node(dlpc->host_node);
+       if (!host) {
+               DRM_DEV_ERROR(dev, "failed to find dsi host\n");
+               return -EPROBE_DEFER;
+       }
+
+       dlpc->dsi = mipi_dsi_device_register_full(host, &info);
+       if (IS_ERR(dlpc->dsi)) {
+               DRM_DEV_ERROR(dev, "failed to create dsi device\n");
+               return PTR_ERR(dlpc->dsi);
+       }
+
+       dlpc->dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST;
+       dlpc->dsi->format = MIPI_DSI_FMT_RGB565;
+       dlpc->dsi->lanes = dlpc->dsi_lanes;
+
+       return devm_mipi_dsi_attach(dev, dlpc->dsi);
+}
+
+static int dlpc3433_probe(struct i2c_client *client)
+{
+       struct device *dev = &client->dev;
+       struct dlpc *dlpc;
+       int ret;
+
+       dlpc = devm_kzalloc(dev, sizeof(*dlpc), GFP_KERNEL);
+       if (!dlpc)
+               return -ENOMEM;
+
+       dlpc->dev = dev;
+
+       dlpc->regmap = devm_regmap_init_i2c(client, &dlpc_regmap_config);
+       if (IS_ERR(dlpc->regmap))
+               return PTR_ERR(dlpc->regmap);
+
+       ret = dlpc3433_parse_dt(dlpc);
+       if (ret)
+               return ret;
+
+       dev_set_drvdata(dev, dlpc);
+       i2c_set_clientdata(client, dlpc);
+
+       dlpc->bridge.funcs = &dlpc_bridge_funcs;
+       dlpc->bridge.of_node = dev->of_node;
+       drm_bridge_add(&dlpc->bridge);
+
+       ret = dlpc_host_attach(dlpc);
+       if (ret) {
+               DRM_DEV_ERROR(dev, "failed to attach dsi host\n");
+               goto err_remove_bridge;
+       }
+
+       return 0;
+
+err_remove_bridge:
+       drm_bridge_remove(&dlpc->bridge);
+       return ret;
+}
+
+static int dlpc3433_remove(struct i2c_client *client)
+{
+       struct dlpc *dlpc = i2c_get_clientdata(client);
+
+       drm_bridge_remove(&dlpc->bridge);
+       of_node_put(dlpc->host_node);
+
+       return 0;
+}
+
+static const struct i2c_device_id dlpc3433_id[] = {
+       { "ti,dlpc3433", 0 },
+       { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, dlpc3433_id);
+
+static const struct of_device_id dlpc3433_match_table[] = {
+       { .compatible = "ti,dlpc3433" },
+       { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dlpc3433_match_table);
+
+static struct i2c_driver dlpc3433_driver = {
+       .probe_new = dlpc3433_probe,
+       .remove = dlpc3433_remove,
+       .id_table = dlpc3433_id,
+       .driver = {
+               .name = "ti-dlpc3433",
+               .of_match_table = dlpc3433_match_table,
+       },
+};
+module_i2c_driver(dlpc3433_driver);
+
+MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
+MODULE_AUTHOR("Christopher Vollo <chris@renewoutreach.org>");
+MODULE_DESCRIPTION("TI DLPC3433 MIPI DSI Display Controller Bridge");
+MODULE_LICENSE("GPL");