]> git.baikalelectronics.ru Git - kernel.git/commitdiff
drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
authorLucas De Marchi <lucas.demarchi@intel.com>
Mon, 4 Dec 2017 23:22:10 +0000 (15:22 -0800)
committerRodrigo Vivi <rodrigo.vivi@intel.com>
Fri, 22 Dec 2017 21:50:18 +0000 (13:50 -0800)
Display WA #1183 was recently added to workaround
"Failures when enabling DPLL0 with eDP link rate 2.16
or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz
(CDCLK_CTL CD Frequency Select 10b or 11b) used in this
 enabling or in previous enabling."

This workaround was designed to minimize the impact only
to save the bad case with that link rates. But HW engineers
indicated that it should be safe to apply broadly, although
they were expecting the DPLL0 link rate to be unchanged on
runtime.

We need to cover 2 cases: when we are in fact enabling DPLL0
and when we are just changing the frequency with small
differences.

This is based on previous patch by Rodrigo Vivi with suggestions
from Ville Syrjälä.

Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204232210.4958-1-lucas.demarchi@intel.com
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_cdclk.c
drivers/gpu/drm/i915/intel_runtime_pm.c

index 41285bec8fc03720ec2799bc6770f0dc46f7c211..966e4df9700ec6cf6a9f7ce64439d8cc6c3ff4d6 100644 (file)
@@ -7029,6 +7029,7 @@ enum {
 #define  RESET_PCH_HANDSHAKE_ENABLE    (1<<4)
 
 #define GEN8_CHICKEN_DCPR_1            _MMIO(0x46430)
+#define   SKL_SELECT_ALTERNATE_DC_EXIT (1<<30)
 #define   MASK_WAKEMEM                 (1<<13)
 
 #define SKL_DFSM                       _MMIO(0x51000)
@@ -8585,6 +8586,7 @@ enum skl_power_gate {
 #define  BXT_CDCLK_CD2X_DIV_SEL_2      (2<<22)
 #define  BXT_CDCLK_CD2X_DIV_SEL_4      (3<<22)
 #define  BXT_CDCLK_CD2X_PIPE(pipe)     ((pipe)<<20)
+#define  CDCLK_DIVMUX_CD_OVERRIDE      (1<<19)
 #define  BXT_CDCLK_CD2X_PIPE_NONE      BXT_CDCLK_CD2X_PIPE(3)
 #define  BXT_CDCLK_SSA_PRECHARGE_ENABLE        (1<<16)
 #define  CDCLK_FREQ_DECIMAL_MASK       (0x7ff)
index 9c5ceb98d48f459d802de4b066bb4bcacbc677ba..d77e2bec1e29ded804c05ef1df9f262839438454 100644 (file)
@@ -931,16 +931,10 @@ static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv,
 
 static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
 {
-       int min_cdclk = skl_calc_cdclk(0, vco);
        u32 val;
 
        WARN_ON(vco != 8100000 && vco != 8640000);
 
-       /* select the minimum CDCLK before enabling DPLL 0 */
-       val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_cdclk);
-       I915_WRITE(CDCLK_CTL, val);
-       POSTING_READ(CDCLK_CTL);
-
        /*
         * We always enable DPLL0 with the lowest link rate possible, but still
         * taking into account the VCO required to operate the eDP panel at the
@@ -994,7 +988,7 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
 {
        int cdclk = cdclk_state->cdclk;
        int vco = cdclk_state->vco;
-       u32 freq_select;
+       u32 freq_select, cdclk_ctl;
        int ret;
 
        mutex_lock(&dev_priv->pcu_lock);
@@ -1009,7 +1003,7 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
                return;
        }
 
-       /* set CDCLK_CTL */
+       /* Choose frequency for this cdclk */
        switch (cdclk) {
        default:
                WARN_ON(cdclk != dev_priv->cdclk.hw.ref);
@@ -1036,10 +1030,33 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
            dev_priv->cdclk.hw.vco != vco)
                skl_dpll0_disable(dev_priv);
 
+       cdclk_ctl = I915_READ(CDCLK_CTL);
+
+       if (dev_priv->cdclk.hw.vco != vco) {
+               /* Wa Display #1183: skl,kbl,cfl */
+               cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
+               cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
+               I915_WRITE(CDCLK_CTL, cdclk_ctl);
+       }
+
+       /* Wa Display #1183: skl,kbl,cfl */
+       cdclk_ctl |= CDCLK_DIVMUX_CD_OVERRIDE;
+       I915_WRITE(CDCLK_CTL, cdclk_ctl);
+       POSTING_READ(CDCLK_CTL);
+
        if (dev_priv->cdclk.hw.vco != vco)
                skl_dpll0_enable(dev_priv, vco);
 
-       I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(cdclk));
+       /* Wa Display #1183: skl,kbl,cfl */
+       cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
+       I915_WRITE(CDCLK_CTL, cdclk_ctl);
+
+       cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
+       I915_WRITE(CDCLK_CTL, cdclk_ctl);
+
+       /* Wa Display #1183: skl,kbl,cfl */
+       cdclk_ctl &= ~CDCLK_DIVMUX_CD_OVERRIDE;
+       I915_WRITE(CDCLK_CTL, cdclk_ctl);
        POSTING_READ(CDCLK_CTL);
 
        /* inform PCU of the change */
index db9d57f3953419e5b204ac8792d5ba62cf7eb31a..d758da6156a822573e419ef3eb185a71db099f46 100644 (file)
@@ -600,6 +600,11 @@ void gen9_enable_dc5(struct drm_i915_private *dev_priv)
 
        DRM_DEBUG_KMS("Enabling DC5\n");
 
+       /* Wa Display #1183: skl,kbl,cfl */
+       if (IS_GEN9_BC(dev_priv))
+               I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
+                          SKL_SELECT_ALTERNATE_DC_EXIT);
+
        gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5);
 }
 
@@ -627,6 +632,11 @@ void skl_disable_dc6(struct drm_i915_private *dev_priv)
 {
        DRM_DEBUG_KMS("Disabling DC6\n");
 
+       /* Wa Display #1183: skl,kbl,cfl */
+       if (IS_GEN9_BC(dev_priv))
+               I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
+                          SKL_SELECT_ALTERNATE_DC_EXIT);
+
        gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
 }