Analogix_dp driver acquires all its resources in the ->bind() callback,
what is a bit against the component driver based approach, where the
driver initialization is split into a probe(), where all resources are
gathered, and a bind(), where all objects are created and a compound
driver is initialized.
Extract all the resource related operations to analogix_dp_probe() and
analogix_dp_remove(), then call them before/after registration of the
device components from the main Exynos DP and Rockchip DP drivers. Also
move the plat_data initialization to the probe() to make it available for
the analogix_dp_probe() function.
This fixes the multiple calls to the bind() of the DRM compound driver
when the DP PHY driver is not yet loaded/probed:
[drm] Exynos DRM: using
14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound
14400000.fimd (ops fimd_component_ops [exynosdrm])
exynos-drm exynos-drm: bound
14450000.mixer (ops mixer_component_ops [exynosdrm])
exynos-dp
145b0000.dp-controller: no DP phy configured
exynos-drm exynos-drm: failed to bind
145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517
exynos-drm exynos-drm: master bind failed: -517
...
[drm] Exynos DRM: using
14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound
14400000.fimd (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound
14450000.mixer (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound
145b0000.dp-controller (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound
14530000.hdmi (ops hdmi_enable [exynosdrm])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Console: switching to colour frame buffer device 170x48
exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device
[drm] Initialized exynos 1.1.0
20180330 for exynos-drm on minor 1
...
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szyprowski@samsung.com
(cherry picked from commit
83a196773b8bc6702f49df1eddc848180e350340)
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
}
struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
- struct analogix_dp_plat_data *plat_data)
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
{
struct platform_device *pdev = to_platform_device(dev);
struct analogix_dp_device *dp;
irq_flags, "analogix-dp", dp);
if (ret) {
dev_err(&pdev->dev, "failed to request irq\n");
- goto err_disable_pm_runtime;
+ return ERR_PTR(ret);
}
disable_irq(dp->irq);
+ return dp;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_probe);
+
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
+{
+ int ret;
+
dp->drm_dev = drm_dev;
dp->encoder = dp->plat_data->encoder;
dp->aux.name = "DP-AUX";
dp->aux.transfer = analogix_dpaux_transfer;
- dp->aux.dev = &pdev->dev;
+ dp->aux.dev = dp->dev;
ret = drm_dp_aux_register(&dp->aux);
if (ret)
- return ERR_PTR(ret);
+ return ret;
- pm_runtime_enable(dev);
+ pm_runtime_enable(dp->dev);
ret = analogix_dp_create_bridge(drm_dev, dp);
if (ret) {
goto err_disable_pm_runtime;
}
- return dp;
+ return 0;
err_disable_pm_runtime:
+ pm_runtime_disable(dp->dev);
- pm_runtime_disable(dev);
-
- return ERR_PTR(ret);
+ return ret;
}
EXPORT_SYMBOL_GPL(analogix_dp_bind);
drm_dp_aux_unregister(&dp->aux);
pm_runtime_disable(dp->dev);
- clk_disable_unprepare(dp->clock);
}
EXPORT_SYMBOL_GPL(analogix_dp_unbind);
+void analogix_dp_remove(struct analogix_dp_device *dp)
+{
+ clk_disable_unprepare(dp->clock);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_remove);
+
#ifdef CONFIG_PM
int analogix_dp_suspend(struct analogix_dp_device *dp)
{
struct drm_device *drm_dev = data;
int ret;
- dp->dev = dev;
dp->drm_dev = drm_dev;
- dp->plat_data.dev_type = EXYNOS_DP;
- dp->plat_data.power_on_start = exynos_dp_poweron;
- dp->plat_data.power_off = exynos_dp_poweroff;
- dp->plat_data.attach = exynos_dp_bridge_attach;
- dp->plat_data.get_modes = exynos_dp_get_modes;
-
if (!dp->plat_data.panel && !dp->ptn_bridge) {
ret = exynos_dp_dt_parse_panel(dp);
if (ret)
dp->plat_data.encoder = encoder;
- dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
- if (IS_ERR(dp->adp)) {
+ ret = analogix_dp_bind(dp->adp, dp->drm_dev);
+ if (ret)
dp->encoder.funcs->destroy(&dp->encoder);
- return PTR_ERR(dp->adp);
- }
- return 0;
+ return ret;
}
static void exynos_dp_unbind(struct device *dev, struct device *master,
if (!dp)
return -ENOMEM;
+ dp->dev = dev;
/*
* We just use the drvdata until driver run into component
* add function, and then we would set drvdata to null, so
/* The remote port can be either a panel or a bridge */
dp->plat_data.panel = panel;
+ dp->plat_data.dev_type = EXYNOS_DP;
+ dp->plat_data.power_on_start = exynos_dp_poweron;
+ dp->plat_data.power_off = exynos_dp_poweroff;
+ dp->plat_data.attach = exynos_dp_bridge_attach;
+ dp->plat_data.get_modes = exynos_dp_get_modes;
dp->plat_data.skip_connector = !!bridge;
+
dp->ptn_bridge = bridge;
out:
+ dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+ if (IS_ERR(dp->adp))
+ return PTR_ERR(dp->adp);
+
return component_add(&pdev->dev, &exynos_dp_ops);
}
static int exynos_dp_remove(struct platform_device *pdev)
{
+ struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
component_del(&pdev->dev, &exynos_dp_ops);
+ analogix_dp_remove(dp->adp);
return 0;
}
void *data)
{
struct rockchip_dp_device *dp = dev_get_drvdata(dev);
- const struct rockchip_dp_chip_data *dp_data;
struct drm_device *drm_dev = data;
int ret;
- dp_data = of_device_get_match_data(dev);
- if (!dp_data)
- return -ENODEV;
-
- dp->data = dp_data;
dp->drm_dev = drm_dev;
ret = rockchip_dp_drm_create_encoder(dp);
dp->plat_data.encoder = &dp->encoder;
- dp->plat_data.dev_type = dp->data->chip_type;
- dp->plat_data.power_on_start = rockchip_dp_poweron_start;
- dp->plat_data.power_off = rockchip_dp_powerdown;
- dp->plat_data.get_modes = rockchip_dp_get_modes;
-
- dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
- if (IS_ERR(dp->adp)) {
- ret = PTR_ERR(dp->adp);
+ ret = analogix_dp_bind(dp->adp, drm_dev);
+ if (ret)
goto err_cleanup_encoder;
- }
return 0;
err_cleanup_encoder:
analogix_dp_unbind(dp->adp);
dp->encoder.funcs->destroy(&dp->encoder);
-
- dp->adp = ERR_PTR(-ENODEV);
}
static const struct component_ops rockchip_dp_component_ops = {
static int rockchip_dp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ const struct rockchip_dp_chip_data *dp_data;
struct drm_panel *panel = NULL;
struct rockchip_dp_device *dp;
int ret;
+ dp_data = of_device_get_match_data(dev);
+ if (!dp_data)
+ return -ENODEV;
+
ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
if (ret < 0)
return ret;
dp->dev = dev;
dp->adp = ERR_PTR(-ENODEV);
+ dp->data = dp_data;
dp->plat_data.panel = panel;
+ dp->plat_data.dev_type = dp->data->chip_type;
+ dp->plat_data.power_on_start = rockchip_dp_poweron_start;
+ dp->plat_data.power_off = rockchip_dp_powerdown;
+ dp->plat_data.get_modes = rockchip_dp_get_modes;
ret = rockchip_dp_of_probe(dp);
if (ret < 0)
platform_set_drvdata(pdev, dp);
+ dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+ if (IS_ERR(dp->adp))
+ return PTR_ERR(dp->adp);
+
return component_add(dev, &rockchip_dp_component_ops);
}
static int rockchip_dp_remove(struct platform_device *pdev)
{
+ struct rockchip_dp_device *dp = platform_get_drvdata(pdev);
+
component_del(&pdev->dev, &rockchip_dp_component_ops);
+ analogix_dp_remove(dp->adp);
return 0;
}
int analogix_dp_suspend(struct analogix_dp_device *dp);
struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
- struct analogix_dp_plat_data *plat_data);
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data);
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev);
void analogix_dp_unbind(struct analogix_dp_device *dp);
+void analogix_dp_remove(struct analogix_dp_device *dp);
int analogix_dp_start_crc(struct drm_connector *connector);
int analogix_dp_stop_crc(struct drm_connector *connector);