ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1

Copy the devicetree source for the A83T SoC and all existing boards
from the Linux v5.18-rc1 tag.

To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2.

As with the other SoCs, updates of note include adding detection GPIO
properties in the USB PHY nodes.

Signed-off-by: Samuel Holland <samuel@sholland.org>

diff --git a/arch/arm/dts/axp81x.dtsi b/arch/arm/dts/axp81x.dtsi
index 043c717dcef1a2cb3be16c02037fc9702d6741ad..b93387b0c1c35bbbc34e4d574b70fc6e3fc4a402 100644 (file)
--- a/arch/arm/dts/axp81x.dtsi
+++ b/arch/arm/dts/axp81x.dtsi
@@ -48,6 +48,11 @@
        interrupt-controller;
        #interrupt-cells = <1>;
 
+       ac_power_supply: ac-power {
+               compatible = "x-powers,axp813-ac-power-supply";
+               status = "disabled";
+       };
+
        axp_adc: adc {
                compatible = "x-powers,axp813-adc";
                #io-channel-cells = <1>;
@@ -58,18 +63,18 @@
                gpio-controller;
                #gpio-cells = <2>;
 
-               gpio0_ldo: gpio0-ldo {
+               gpio0_ldo: gpio0-ldo-pin {
                        pins = "GPIO0";
                        function = "ldo";
                };
 
-               gpio1_ldo: gpio1-ldo {
+               gpio1_ldo: gpio1-ldo-pin {
                        pins = "GPIO1";
                        function = "ldo";
                };
        };
 
-       battery_power_supply: battery-power-supply {
+       battery_power_supply: battery-power {
                compatible = "x-powers,axp813-battery-power-supply";
                status = "disabled";
        };
@@ -166,4 +171,8 @@
                        status = "disabled";
                };
        };
+
+       usb_power_supply: usb-power {
+               compatible = "x-powers,axp813-usb-power-supply";
+       };
 };

diff --git a/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
index 36ecebaff3c0427610526ebf8441b933cd470b4e..9c006fc188217e608a2356885ed6a0293e7f1b99 100644 (file)
--- a/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -79,6 +79,14 @@
        };
 };
 
+&cpu0 {
+       cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+       cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -146,6 +154,10 @@
 
 #include "axp81x.dtsi"
 
+&ac_power_supply {
+       status = "okay";
+};
+
 &reg_aldo1 {
        regulator-always-on;
        regulator-min-microvolt = <1800000>;

diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
index 2beafe3a31d273fcd3bbbf070d7b25739e43c6db..b60016a4429c54ea9c69ac02be7c5b853a442c0b 100644 (file)
--- a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
@@ -74,12 +74,12 @@
        leds {
                compatible = "gpio-leds";
 
-               blue {
+               led-0 {
                        label = "bananapi-m3:blue:usr";
                        gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
                };
 
-               green {
+               led-1 {
                        label = "bananapi-m3:green:usr";
                        gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
                };
@@ -107,6 +107,14 @@
        };
 };
 
+&cpu0 {
+       cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+       cpu-supply = <&reg_dcdc3>;
+};
+
 &de {
        status = "okay";
 };
@@ -183,6 +191,11 @@
        status = "okay";
 };
 
+&r_cir {
+       clock-frequency = <3000000>;
+       status = "okay";
+};
+
 &r_rsb {
        status = "okay";
 
@@ -224,6 +237,14 @@
 
 #include "axp81x.dtsi"
 
+&ac_power_supply {
+       status = "okay";
+};
+
+&battery_power_supply {
+       status = "okay";
+};
+
 &reg_aldo1 {
        regulator-always-on;
        regulator-min-microvolt = <1800000>;
@@ -301,8 +322,8 @@
 
 &reg_dldo3 {
        regulator-always-on;
-       regulator-min-microvolt = <2500000>;
-       regulator-max-microvolt = <2500000>;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
        regulator-name = "vcc-pd";
 };
 
@@ -350,11 +371,37 @@
        status = "okay";
 };
 
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm43438-bt";
+               clocks = <&ac100_rtc 1>;
+               clock-names = "lpo";
+               vbat-supply = <&reg_dldo1>;
+               vddio-supply = <&reg_dldo1>;
+               device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+               host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+               shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+       };
+};
+
 &usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usb_power_supply {
        status = "okay";
 };
 
 &usbphy {
+       usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+       usb0_vbus_power-supply = <&usb_power_supply>;
+       usb0_vbus-supply = <&reg_drivevbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        status = "okay";
 };

diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
index ecd9ff38a8b96ab9488c556d8e00a80f0a8cc5cf..e26af7cf10e0ce20c94990bb73767ceff09428f2 100644 (file)
--- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
@@ -60,25 +60,36 @@
                stdout-path = "serial0:115200n8";
        };
 
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
 
-               blue {
+               led-0 {
                        label = "cubietruck-plus:blue:usr";
                        gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
                };
 
-               orange {
+               led-1 {
                        label = "cubietruck-plus:orange:usr";
                        gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
                };
 
-               white {
+               led-2 {
                        label = "cubietruck-plus:white:usr";
                        gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
                };
 
-               green {
+               led-3 {
                        label = "cubietruck-plus:green:usr";
                        gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
                };
@@ -90,7 +101,7 @@
                initial-mode = <1>; /* initialize in HUB mode */
                disabled-ports = <1>;
                intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-               reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+               reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
                connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
                refclk-frequency = <19200000>;
        };
@@ -145,6 +156,18 @@
        };
 };
 
+&cpu0 {
+       cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+       cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+       status = "okay";
+};
+
 &ehci0 {
        /* GL830 USB-to-SATA bridge here */
        status = "okay";
@@ -164,6 +187,16 @@
        status = "okay";
 };
 
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &mdio {
        rgmii_phy: ethernet-phy@1 {
                compatible = "ethernet-phy-ieee802.3-c22";
@@ -239,6 +272,14 @@
 
 #include "axp81x.dtsi"
 
+&ac_power_supply {
+       status = "okay";
+};
+
+&battery_power_supply {
+       status = "okay";
+};
+
 &reg_aldo1 {
        regulator-always-on;
        regulator-min-microvolt = <1800000>;
@@ -386,11 +427,37 @@
        status = "okay";
 };
 
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm4330-bt";
+               clocks = <&ac100_rtc 1>;
+               clock-names = "lpo";
+               vbat-supply = <&reg_dcdc1>;
+               vddio-supply = <&reg_sw>;
+               device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+               host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+               shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+       };
+};
+
 &usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usb_power_supply {
        status = "okay";
 };
 
 &usbphy {
+       usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+       usb0_vbus_power-supply = <&usb_power_supply>;
+       usb0_vbus-supply = <&reg_drivevbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";

diff --git a/arch/arm/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/dts/sun8i-a83t-tbs-a711.dts
index 1537ce148cc1918a92db88c5352840ade011b9c2..13ae10f60d53df8a2a5a7bbbd4a4ffb58a57ad43 100644 (file)
--- a/arch/arm/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/dts/sun8i-a83t-tbs-a711.dts
@@ -46,6 +46,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
 
 / {
        model = "TBS A711 Tablet";
@@ -64,7 +65,7 @@
                compatible = "pwm-backlight";
                pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
                enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
-
+               power-supply = <&reg_sw>;
                brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
                default-brightness-level = <9>;
        };
@@ -98,6 +99,13 @@
                };
        };
 
+       reg_gps: reg-gps {
+               compatible = "regulator-fixed";
+               regulator-name = "gps";
+               regulator-min-microvolt = <3000000>;
+               regulator-max-microvolt = <3000000>;
+       };
+
        reg_vbat: reg-vbat {
                compatible = "regulator-fixed";
                regulator-name = "vbat";
@@ -156,10 +164,39 @@
        status = "okay";
 };
 
+&i2c0 {
+       clock-frequency = <400000>;
+       status = "okay";
+
+       touchscreen@38 {
+               compatible = "edt,edt-ft5206";
+               reg = <0x38>;
+               interrupt-parent = <&r_pio>;
+               interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
+               reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */
+               vcc-supply = <&reg_ldo_io0>;
+               touchscreen-size-x = <1024>;
+               touchscreen-size-y = <600>;
+       };
+};
+
+&i2c1 {
+       clock-frequency = <400000>;
+       status = "okay";
+
+       accelerometer@18 {
+               compatible = "bosch,bma250";
+               reg = <0x18>;
+               interrupt-parent = <&pio>;
+               interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
+       };
+};
+
 &mmc0 {
        vmmc-supply = <&reg_dcdc1>;
        pinctrl-names = "default";
        pinctrl-0 = <&mmc0_pins>;
+       bus-width = <4>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
@@ -171,6 +208,7 @@
        vqmmc-supply = <&reg_dldo1>;
        non-removable;
        wakeup-source;
+       keep-power-in-suspend;
        status = "okay";
 
        brcmf: wifi@1 {
@@ -199,6 +237,25 @@
        status = "okay";
 };
 
+&r_lradc {
+       vref-supply = <&reg_aldo2>;
+       status = "okay";
+
+       button-210 {
+               label = "Volume Up";
+               linux,code = <KEY_VOLUMEUP>;
+               channel = <0>;
+               voltage = <210000>;
+       };
+
+       button-410 {
+               label = "Volume Down";
+               linux,code = <KEY_VOLUMEDOWN>;
+               channel = <0>;
+               voltage = <410000>;
+       };
+};
+
 &r_rsb {
        status = "okay";
 
@@ -317,8 +374,8 @@
 };
 
 &reg_dldo3 {
-       regulator-min-microvolt = <2800000>;
-       regulator-max-microvolt = <2800000>;
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
        regulator-name = "vdd-csi";
 };
 
@@ -390,8 +447,7 @@
 };
 
 &tcon0_out {
-       tcon0_out_lcd: endpoint@0 {
-               reg = <0>;
+       tcon0_out_lcd: endpoint {
                remote-endpoint = <&panel_input>;
        };
 };
@@ -406,18 +462,45 @@
 &uart1 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+       uart-has-rtscts;
        status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm20702a1";
+               clocks = <&ac100_rtc 1>;
+               clock-names = "lpo";
+               vbat-supply = <&reg_vbat>;
+               vddio-supply = <&reg_dldo1>;
+               device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+               host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+               shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+               max-speed = <1500000>;
+       };
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pb_pins>;
+       status = "okay";
+
+       gnss {
+               compatible = "u-blox,neo-6m";
+
+               v-bckp-supply = <&reg_rtc_ldo>;
+               vcc-supply = <&reg_gps>;
+               current-speed = <9600>;
+       };
 };
 
 &usb_otg {
-       dr_mode = "otg";
        status = "okay";
 };
 
 &usbphy {
-       usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+       usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
+       usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_drivevbus>;
-       usb1_vbus_supply = <&reg_vmain>;
-       usb2_vbus_supply = <&reg_vmain>;
+       usb1_vbus-supply = <&reg_vmain>;
+       usb2_vbus-supply = <&reg_vmain>;
        status = "okay";
 };

diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi
index 2be23d600957ce4ed8a99fbf82c84667502a6e2b..9c07660080d2cbde6fd6f9996db9777cf5e281ef 100644 (file)
--- a/arch/arm/dts/sun8i-a83t.dtsi
+++ b/arch/arm/dts/sun8i-a83t.dtsi
@@ -50,6 +50,7 @@
 #include <dt-bindings/reset/sun8i-a83t-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 #include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
        interrupt-parent = <&gic>;
@@ -61,79 +62,91 @@
                #size-cells = <0>;
 
                cpu0: cpu@0 {
-                       clocks = <&ccu CLK_C0CPUX>;
-                       clock-names = "cpu";
                        compatible = "arm,cortex-a7";
                        device_type = "cpu";
+                       clocks = <&ccu CLK_C0CPUX>;
                        operating-points-v2 = <&cpu0_opp_table>;
                        cci-control-port = <&cci_control0>;
                        enable-method = "allwinner,sun8i-a83t-smp";
                        reg = <0>;
+                       #cooling-cells = <2>;
                };
 
-               cpu@1 {
+               cpu1: cpu@1 {
                        compatible = "arm,cortex-a7";
                        device_type = "cpu";
+                       clocks = <&ccu CLK_C0CPUX>;
                        operating-points-v2 = <&cpu0_opp_table>;
                        cci-control-port = <&cci_control0>;
                        enable-method = "allwinner,sun8i-a83t-smp";
                        reg = <1>;
+                       #cooling-cells = <2>;
                };
 
-               cpu@2 {
+               cpu2: cpu@2 {
                        compatible = "arm,cortex-a7";
                        device_type = "cpu";
+                       clocks = <&ccu CLK_C0CPUX>;
                        operating-points-v2 = <&cpu0_opp_table>;
                        cci-control-port = <&cci_control0>;
                        enable-method = "allwinner,sun8i-a83t-smp";
                        reg = <2>;
+                       #cooling-cells = <2>;
                };
 
-               cpu@3 {
+               cpu3: cpu@3 {
                        compatible = "arm,cortex-a7";
                        device_type = "cpu";
+                       clocks = <&ccu CLK_C0CPUX>;
                        operating-points-v2 = <&cpu0_opp_table>;
                        cci-control-port = <&cci_control0>;
                        enable-method = "allwinner,sun8i-a83t-smp";
                        reg = <3>;
+                       #cooling-cells = <2>;
                };
 
                cpu100: cpu@100 {
-                       clocks = <&ccu CLK_C1CPUX>;
-                       clock-names = "cpu";
                        compatible = "arm,cortex-a7";
                        device_type = "cpu";
+                       clocks = <&ccu CLK_C1CPUX>;
                        operating-points-v2 = <&cpu1_opp_table>;
                        cci-control-port = <&cci_control1>;
                        enable-method = "allwinner,sun8i-a83t-smp";
                        reg = <0x100>;
+                       #cooling-cells = <2>;
                };
 
-               cpu@101 {
+               cpu101: cpu@101 {
                        compatible = "arm,cortex-a7";
                        device_type = "cpu";
+                       clocks = <&ccu CLK_C1CPUX>;
                        operating-points-v2 = <&cpu1_opp_table>;
                        cci-control-port = <&cci_control1>;
                        enable-method = "allwinner,sun8i-a83t-smp";
                        reg = <0x101>;
+                       #cooling-cells = <2>;
                };
 
-               cpu@102 {
+               cpu102: cpu@102 {
                        compatible = "arm,cortex-a7";
                        device_type = "cpu";
+                       clocks = <&ccu CLK_C1CPUX>;
                        operating-points-v2 = <&cpu1_opp_table>;
                        cci-control-port = <&cci_control1>;
                        enable-method = "allwinner,sun8i-a83t-smp";
                        reg = <0x102>;
+                       #cooling-cells = <2>;
                };
 
-               cpu@103 {
+               cpu103: cpu@103 {
                        compatible = "arm,cortex-a7";
                        device_type = "cpu";
+                       clocks = <&ccu CLK_C1CPUX>;
                        operating-points-v2 = <&cpu1_opp_table>;
                        cci-control-port = <&cci_control1>;
                        enable-method = "allwinner,sun8i-a83t-smp";
                        reg = <0x103>;
+                       #cooling-cells = <2>;
                };
        };
 
@@ -187,12 +200,7 @@
                status = "disabled";
        };
 
-       memory {
-               reg = <0x40000000 0x80000000>;
-               device_type = "memory";
-       };
-
-       cpu0_opp_table: opp_table0 {
+       cpu0_opp_table: opp-table-cluster0 {
                compatible = "operating-points-v2";
                opp-shared;
 
@@ -245,7 +253,7 @@
                };
        };
 
-       cpu1_opp_table: opp_table1 {
+       cpu1_opp_table: opp-table-cluster1 {
                compatible = "operating-points-v2";
                opp-shared;
 
@@ -306,16 +314,27 @@
 
                display_clocks: clock@1000000 {
                        compatible = "allwinner,sun8i-a83t-de2-clk";
-                       reg = <0x01000000 0x100000>;
-                       clocks = <&ccu CLK_PLL_DE>,
-                                <&ccu CLK_BUS_DE>;
-                       clock-names = "mod",
-                                     "bus";
+                       reg = <0x01000000 0x10000>;
+                       clocks = <&ccu CLK_BUS_DE>,
+                                <&ccu CLK_PLL_DE>;
+                       clock-names = "bus",
+                                     "mod";
                        resets = <&ccu RST_BUS_DE>;
                        #clock-cells = <1>;
                        #reset-cells = <1>;
                };
 
+               rotate: rotate@1020000 {
+                       compatible = "allwinner,sun8i-a83t-de2-rotate";
+                       reg = <0x1020000 0x10000>;
+                       interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&display_clocks CLK_BUS_ROT>,
+                                <&display_clocks CLK_ROT>;
+                       clock-names = "bus",
+                                     "mod";
+                       resets = <&display_clocks RST_ROT>;
+               };
+
                mixer0: mixer@1100000 {
                        compatible = "allwinner,sun8i-a83t-de2-mixer-0";
                        reg = <0x01100000 0x100000>;
@@ -338,6 +357,11 @@
                                                reg = <0>;
                                                remote-endpoint = <&tcon0_in_mixer0>;
                                        };
+
+                                       mixer0_out_tcon1: endpoint@1 {
+                                               reg = <1>;
+                                               remote-endpoint = <&tcon1_in_mixer0>;
+                                       };
                                };
                        };
                };
@@ -356,9 +380,17 @@
                                #size-cells = <0>;
 
                                mixer1_out: port@1 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
                                        reg = <1>;
 
-                                       mixer1_out_tcon1: endpoint {
+                                       mixer1_out_tcon0: endpoint@0 {
+                                               reg = <0>;
+                                               remote-endpoint = <&tcon0_in_mixer1>;
+                                       };
+
+                                       mixer1_out_tcon1: endpoint@1 {
+                                               reg = <1>;
                                                remote-endpoint = <&tcon1_in_mixer1>;
                                        };
                                };
@@ -425,6 +457,7 @@
                        clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
                        clock-names = "ahb", "tcon-ch0";
                        clock-output-names = "tcon-pixel-clock";
+                       #clock-cells = <0>;
                        resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
                        reset-names = "lcd", "lvds";
 
@@ -441,11 +474,14 @@
                                                reg = <0>;
                                                remote-endpoint = <&mixer0_out_tcon0>;
                                        };
+
+                                       tcon0_in_mixer1: endpoint@1 {
+                                               reg = <1>;
+                                               remote-endpoint = <&mixer1_out_tcon0>;
+                                       };
                                };
 
                                tcon0_out: port@1 {
-                                       #address-cells = <1>;
-                                       #size-cells = <0>;
                                        reg = <1>;
                                };
                        };
@@ -465,9 +501,17 @@
                                #size-cells = <0>;
 
                                tcon1_in: port@0 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
                                        reg = <0>;
 
-                                       tcon1_in_mixer1: endpoint {
+                                       tcon1_in_mixer0: endpoint@0 {
+                                               reg = <0>;
+                                               remote-endpoint = <&mixer0_out_tcon1>;
+                                       };
+
+                                       tcon1_in_mixer1: endpoint@1 {
+                                               reg = <1>;
                                                remote-endpoint = <&mixer1_out_tcon1>;
                                        };
                                };
@@ -549,6 +593,31 @@
                sid: eeprom@1c14000 {
                        compatible = "allwinner,sun8i-a83t-sid";
                        reg = <0x1c14000 0x400>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       ths_calibration: thermal-sensor-calibration@34 {
+                               reg = <0x34 8>;
+                       };
+               };
+
+               crypto: crypto@1c15000 {
+                       compatible = "allwinner,sun8i-a83t-crypto";
+                       reg = <0x01c15000 0x1000>;
+                       interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&ccu RST_BUS_SS>;
+                       clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+                       clock-names = "bus", "mod";
+               };
+
+               msgbox: mailbox@1c17000 {
+                       compatible = "allwinner,sun8i-a83t-msgbox",
+                                    "allwinner,sun6i-a31-msgbox";
+                       reg = <0x01c17000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MSGBOX>;
+                       resets = <&ccu RST_BUS_MSGBOX>;
+                       interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+                       #mbox-cells = <1>;
                };
 
                usb_otg: usb@1c19000 {
@@ -562,6 +631,7 @@
                        phys = <&usbphy 0>;
                        phy-names = "usb";
                        extcon = <&usbphy 0>;
+                       dr_mode = "otg";
                        status = "disabled";
                };
 
@@ -649,6 +719,20 @@
                        #interrupt-cells = <3>;
                        #gpio-cells = <3>;
 
+                       /omit-if-no-ref/
+                       csi_8bit_parallel_pins: csi-8bit-parallel-pins {
+                               pins = "PE0", "PE2", "PE3", "PE6", "PE7",
+                                      "PE8", "PE9", "PE10", "PE11",
+                                      "PE12", "PE13";
+                               function = "csi";
+                       };
+
+                       /omit-if-no-ref/
+                       csi_mclk_pin: csi-mclk-pin {
+                               pins = "PE1";
+                               function = "csi";
+                       };
+
                        emac_rgmii_pins: emac-rgmii-pins {
                                pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
                                       "PD11", "PD12", "PD13", "PD14", "PD18",
@@ -676,6 +760,12 @@
                                function = "i2c1";
                        };
 
+                       /omit-if-no-ref/
+                       i2c2_pe_pins: i2c2-pe-pins {
+                               pins = "PE14", "PE15";
+                               function = "i2c2";
+                       };
+
                        i2c2_ph_pins: i2c2-ph-pins {
                                pins = "PH4", "PH5";
                                function = "i2c2";
@@ -747,10 +837,16 @@
                                pins = "PG8", "PG9";
                                function = "uart1";
                        };
+
+                       /omit-if-no-ref/
+                       uart2_pb_pins: uart2-pb-pins {
+                               pins = "PB0", "PB1";
+                               function = "uart2";
+                       };
                };
 
                timer@1c20c00 {
-                       compatible = "allwinner,sun4i-a10-timer";
+                       compatible = "allwinner,sun8i-a23-timer";
                        reg = <0x01c20c00 0xa0>;
                        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -852,6 +948,39 @@
                        status = "disabled";
                };
 
+               uart2: serial@1c28800 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28800 0x400>;
+                       interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART2>;
+                       resets = <&ccu RST_BUS_UART2>;
+                       status = "disabled";
+               };
+
+               uart3: serial@1c28c00 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28c00 0x400>;
+                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART3>;
+                       resets = <&ccu RST_BUS_UART3>;
+                       status = "disabled";
+               };
+
+               uart4: serial@1c29000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c29000 0x400>;
+                       interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART4>;
+                       resets = <&ccu RST_BUS_UART4>;
+                       status = "disabled";
+               };
+
                i2c0: i2c@1c2ac00 {
                        compatible = "allwinner,sun8i-a83t-i2c",
                                     "allwinner,sun6i-a31-i2c";
@@ -898,12 +1027,10 @@
                        reg = <0x01c30000 0x104>;
                        interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "macirq";
-                       resets = <&ccu 13>;
-                       reset-names = "stmmaceth";
-                       clocks = <&ccu 27>;
+                       clocks = <&ccu CLK_BUS_EMAC>;
                        clock-names = "stmmaceth";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+                       resets = <&ccu RST_BUS_EMAC>;
+                       reset-names = "stmmaceth";
                        status = "disabled";
 
                        mdio: mdio {
@@ -914,7 +1041,7 @@
                };
 
                gic: interrupt-controller@1c81000 {
-                       compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+                       compatible = "arm,gic-400";
                        reg = <0x01c81000 0x1000>,
                              <0x01c82000 0x2000>,
                              <0x01c84000 0x2000>,
@@ -924,6 +1051,18 @@
                        interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
                };
 
+               csi: camera@1cb0000 {
+                       compatible = "allwinner,sun8i-a83t-csi";
+                       reg = <0x01cb0000 0x1000>;
+                       interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_CSI>,
+                                <&ccu CLK_CSI_SCLK>,
+                                <&ccu CLK_DRAM_CSI>;
+                       clock-names = "bus", "mod", "ram";
+                       resets = <&ccu RST_BUS_CSI>;
+                       status = "disabled";
+               };
+
                hdmi: hdmi@1ee0000 {
                        compatible = "allwinner,sun8i-a83t-dw-hdmi";
                        reg = <0x01ee0000 0x10000>;
@@ -935,7 +1074,7 @@
                        resets = <&ccu RST_BUS_HDMI1>;
                        reset-names = "ctrl";
                        phys = <&hdmi_phy>;
-                       phy-names = "hdmi-phy";
+                       phy-names = "phy";
                        pinctrl-names = "default";
                        pinctrl-0 = <&hdmi_pins>;
                        status = "disabled";
@@ -981,7 +1120,7 @@
                        compatible = "allwinner,sun8i-a83t-r-ccu";
                        reg = <0x01f01400 0x400>;
                        clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
-                                <&ccu 6>;
+                                <&ccu CLK_PLL_PERIPH>;
                        clock-names = "hosc", "losc", "iosc", "pll-periph";
                        #clock-cells = <1>;
                        #reset-cells = <1>;
@@ -992,6 +1131,26 @@
                        reg = <0x1f01c00 0x400>;
                };
 
+               r_cir: ir@1f02000 {
+                       compatible = "allwinner,sun8i-a83t-ir",
+                               "allwinner,sun6i-a31-ir";
+                       clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+                       clock-names = "apb", "ir";
+                       resets = <&r_ccu RST_APB0_IR>;
+                       interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                       reg = <0x01f02000 0x400>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&r_cir_pin>;
+                       status = "disabled";
+               };
+
+               r_lradc: lradc@1f03c00 {
+                       compatible = "allwinner,sun8i-a83t-r-lradc";
+                       reg = <0x01f03c00 0x100>;
+                       interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+               };
+
                r_pio: pinctrl@1f02c00 {
                        compatible = "allwinner,sun8i-a83t-r-pinctrl";
                        reg = <0x01f02c00 0x400>;
@@ -1004,6 +1163,11 @@
                        interrupt-controller;
                        #interrupt-cells = <3>;
 
+                       r_cir_pin: r-cir-pin {
+                               pins = "PL12";
+                               function = "s_cir_rx";
+                       };
+
                        r_rsb_pins: r-rsb-pins {
                                pins = "PL0", "PL1";
                                function = "s_rsb";
@@ -1026,5 +1190,82 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                };
+
+               ths: thermal-sensor@1f04000 {
+                       compatible = "allwinner,sun8i-a83t-ths";
+                       reg = <0x01f04000 0x100>;
+                       interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+                       nvmem-cells = <&ths_calibration>;
+                       nvmem-cell-names = "calibration";
+                       #thermal-sensor-cells = <1>;
+               };
+       };
+
+       thermal-zones {
+               cpu0_thermal: cpu0-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+                       thermal-sensors = <&ths 0>;
+
+                       trips {
+                               cpu0_hot: cpu-hot {
+                                       temperature = <80000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               cpu0_very_hot: cpu-very-hot {
+                                       temperature = <100000>;
+                                       hysteresis = <0>;
+                                       type = "critical";
+                               };
+                       };
+
+                       cooling-maps {
+                               cpu-hot-limit {
+                                       trip = <&cpu0_hot>;
+                                       cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                                        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                                        <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                                        <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                               };
+                       };
+               };
+
+               cpu1_thermal: cpu1-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+                       thermal-sensors = <&ths 1>;
+
+                       trips {
+                               cpu1_hot: cpu-hot {
+                                       temperature = <80000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               cpu1_very_hot: cpu-very-hot {
+                                       temperature = <100000>;
+                                       hysteresis = <0>;
+                                       type = "critical";
+                               };
+                       };
+
+                       cooling-maps {
+                               cpu-hot-limit {
+                                       trip = <&cpu1_hot>;
+                                       cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                                        <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                                        <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                                        <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                               };
+                       };
+               };
+
+               gpu_thermal: gpu-thermal {
+                       polling-delay-passive = <0>;
+                       polling-delay = <0>;
+                       thermal-sensors = <&ths 2>;
+               };
        };
 };