/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
- compatible = "ntc,ncp15wb473";
+ compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
Requires node properties:
- "compatible" value : one of
- "ntc,ncp15wb473"
- "ntc,ncp18wb473"
- "ntc,ncp21wb473"
- "ntc,ncp03wb473"
- "ntc,ncp15wl333"
+ "murata,ncp15wb473"
+ "murata,ncp18wb473"
+ "murata,ncp21wb473"
+ "murata,ncp03wb473"
+ "murata,ncp15wl333"
+
+/* Usage of vendor name "ntc" is deprecated */
+<DEPRECATED> "ntc,ncp15wb473"
+<DEPRECATED> "ntc,ncp18wb473"
+<DEPRECATED> "ntc,ncp21wb473"
+<DEPRECATED> "ntc,ncp03wb473"
+<DEPRECATED> "ntc,ncp15wl333"
+
- "pullup-uv" Pull up voltage in micro volts
- "pullup-ohm" Pull up resistor value in ohms
- "pulldown-ohm" Pull down resistor value in ohms
Example:
ncp15wb473@0 {
- compatible = "ntc,ncp15wb473";
+ compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
Kernel driver ntc_thermistor
=================
-Supported thermistors:
+Supported thermistors from Murata:
* Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333
Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333'
Datasheet: Publicly available at Murata
Description
-----------
-The NTC thermistor is a simple thermistor that requires users to provide the
-resistance and lookup the corresponding compensation table to get the
-temperature input.
+The NTC (Negative Temperature Coefficient) thermistor is a simple thermistor
+that requires users to provide the resistance and lookup the corresponding
+compensation table to get the temperature input.
The NTC driver provides lookup tables with a linear approximation function
and four circuit models with an option not to use any of the four models.
will be called pc87427.
config SENSORS_NTC_THERMISTOR
- tristate "NTC thermistor support"
+ tristate "NTC thermistor support from Murata"
depends on !OF || IIO=n || IIO
help
This driver supports NTC thermistors sensor reading and its
send notifications about the temperature.
Currently, this driver supports
- NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
+ NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333
+ from Murata.
This driver can also be built as a module. If so, the module
will be called ntc-thermistor.
}
static const struct of_device_id ntc_match[] = {
+ { .compatible = "murata,ncp15wb473",
+ .data = &ntc_thermistor_id[0] },
+ { .compatible = "murata,ncp18wb473",
+ .data = &ntc_thermistor_id[1] },
+ { .compatible = "murata,ncp21wb473",
+ .data = &ntc_thermistor_id[2] },
+ { .compatible = "murata,ncp03wb473",
+ .data = &ntc_thermistor_id[3] },
+ { .compatible = "murata,ncp15wl333",
+ .data = &ntc_thermistor_id[4] },
+
+ /* Usage of vendor name "ntc" is deprecated */
{ .compatible = "ntc,ncp15wb473",
.data = &ntc_thermistor_id[0] },
{ .compatible = "ntc,ncp18wb473",
module_platform_driver(ntc_thermistor_driver);
-MODULE_DESCRIPTION("NTC Thermistor Driver");
+MODULE_DESCRIPTION("NTC Thermistor Driver from Murata");
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ntc-thermistor");