]> git.baikalelectronics.ru Git - kernel.git/commitdiff
drm/i915/dpcd_bl: Remove redundant AUX backlight frequency calculations
authorLyude Paul <lyude@redhat.com>
Fri, 14 May 2021 18:14:55 +0000 (14:14 -0400)
committerLyude Paul <lyude@redhat.com>
Wed, 9 Jun 2021 17:35:18 +0000 (13:35 -0400)
Noticed this while moving all of the VESA backlight code in i915 over to
DRM helpers: it would appear that we calculate the frequency value we want
to write to DP_EDP_BACKLIGHT_FREQ_SET twice even though this value never
actually changes during runtime. So, let's simplify things by just caching
this value in intel_panel.backlight, and re-writing it as-needed.

Changes since v1:
* Wrap panel->backlight.edp.vesa.pwm_freq_pre_divider in
  DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP check - Jani

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-2-lyude@redhat.com
drivers/gpu/drm/i915/display/intel_display_types.h
drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c

index 9c0adfc60c6fbeb3d89adeaaa78daaaa88855dda..7054a37363fb5012affd9e503157433baadb1dae 100644 (file)
@@ -311,6 +311,7 @@ struct intel_panel {
                union {
                        struct {
                                u8 pwmgen_bit_count;
+                               u8 pwm_freq_pre_divider;
                        } vesa;
                        struct {
                                bool sdr_uses_aux;
index 8e9ac9ba1d389a70cc9ca1703b5f9f1be0563e90..68bfe50ada59a0089e2d963214765e4ea041a865 100644 (file)
@@ -373,50 +373,6 @@ intel_dp_aux_vesa_set_backlight(const struct drm_connector_state *conn_state,
        }
 }
 
-/*
- * Set PWM Frequency divider to match desired frequency in vbt.
- * The PWM Frequency is calculated as 27Mhz / (F x P).
- * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of the
- *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
- * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
- *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
- */
-static bool intel_dp_aux_vesa_set_pwm_freq(struct intel_connector *connector)
-{
-       struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
-       struct intel_dp *intel_dp = intel_attached_dp(connector);
-       const u8 pn = connector->panel.backlight.edp.vesa.pwmgen_bit_count;
-       int freq, fxp, f, fxp_actual, fxp_min, fxp_max;
-
-       freq = dev_priv->vbt.backlight.pwm_freq_hz;
-       if (!freq) {
-               drm_dbg_kms(&dev_priv->drm,
-                           "Use panel default backlight frequency\n");
-               return false;
-       }
-
-       fxp = DIV_ROUND_CLOSEST(KHz(DP_EDP_BACKLIGHT_FREQ_BASE_KHZ), freq);
-       f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
-       fxp_actual = f << pn;
-
-       /* Ensure frequency is within 25% of desired value */
-       fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
-       fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
-
-       if (fxp_min > fxp_actual || fxp_actual > fxp_max) {
-               drm_dbg_kms(&dev_priv->drm, "Actual frequency out of range\n");
-               return false;
-       }
-
-       if (drm_dp_dpcd_writeb(&intel_dp->aux,
-                              DP_EDP_BACKLIGHT_FREQ_SET, (u8) f) < 0) {
-               drm_dbg_kms(&dev_priv->drm,
-                           "Failed to write aux backlight freq\n");
-               return false;
-       }
-       return true;
-}
-
 static void
 intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *crtc_state,
                                   const struct drm_connector_state *conn_state, u32 level)
@@ -459,9 +415,13 @@ intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *crtc_state,
                break;
        }
 
-       if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP)
-               if (intel_dp_aux_vesa_set_pwm_freq(connector))
+       if (panel->backlight.edp.vesa.pwm_freq_pre_divider) {
+               if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET,
+                                      panel->backlight.edp.vesa.pwm_freq_pre_divider) == 1)
                        new_dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
+               else
+                       drm_dbg_kms(&i915->drm, "Failed to write aux backlight frequency\n");
+       }
 
        if (new_dpcd_buf != dpcd_buf) {
                if (drm_dp_dpcd_writeb(&intel_dp->aux,
@@ -482,6 +442,14 @@ static void intel_dp_aux_vesa_disable_backlight(const struct drm_connector_state
                                  false);
 }
 
+/*
+ * Compute PWM frequency divider value based off the frequency provided to us by the vbt.
+ * The PWM Frequency is calculated as 27Mhz / (F x P).
+ * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0 of the
+ *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
+ * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of the
+ *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
+ */
 static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connector)
 {
        struct drm_i915_private *i915 = to_i915(connector->base.dev);
@@ -533,8 +501,10 @@ static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto
        pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
        pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
 
+       /* Ensure frequency is within 25% of desired value */
        fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
        fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
+
        if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
                drm_dbg_kms(&i915->drm,
                            "VBT defined backlight frequency out of range\n");
@@ -555,7 +525,10 @@ static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto
                            "Failed to write aux pwmgen bit count\n");
                return max_backlight;
        }
+
        panel->backlight.edp.vesa.pwmgen_bit_count = pn;
+       if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP)
+               panel->backlight.edp.vesa.pwm_freq_pre_divider = f;
 
        max_backlight = (1 << pn) - 1;