MIPS: dts: Fix a typo in the node unit name

The unit name was 8c00000 but since the reg property is declared as:

  reg = <0x0 0x4c00000 0x1 0xfb400000>;

the unit name should have been instead 4c00000.

Tested on MIPS Creator CI20 (v1):

$ cat /sys/firmware/devicetree/.../partitions/partition@4c00000/label;echo
system

Reported-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18529/
Signed-off-by: James Hogan <jhogan@kernel.org>

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 7d5e49e40b0d58c0b4c74c6c434919d0e8900c71..38078594cf97ed5d7d6c99b8a2a09290aec2aba3 100644 (file)
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -125,7 +125,7 @@
                                        reg = <0x0 0xc00000 0x0 0x4000000>;
                                };
 
-                               partition@8c00000 {
+                               partition@4c00000 {
                                        label = "system";
                                        reg = <0x0 0x4c00000 0x1 0xfb400000>;
                                };