phy: aquantia: Fix AN when higher speeds than 1G are not advertised

Even when the eth port is resticted to work with speeds not higher than 1G,
and so the eth driver is requesting the phy (via phylink) to advertise up
to 1000BASET support, the aquantia phy device is still advertising for 2.5G
and 5G speeds.
Clear these advertising defaults when requested.

Cc: Ondrej Spacek <ondrej.spacek@nxp.com>
Fixes: a9894f007b7e1 ("net: phy: aquantia: add support for auto-negotiation configuration")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index a8db1a19011bde69fe9435c63ddc39c83258d413..c7047f5d7a9b0fb95e0467a5ac74b01363ce354b 100644 (file)
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -34,6 +34,8 @@
 #define MDIO_AN_VEND_PROV                      0xc400
 #define MDIO_AN_VEND_PROV_1000BASET_FULL       BIT(15)
 #define MDIO_AN_VEND_PROV_1000BASET_HALF       BIT(14)
+#define MDIO_AN_VEND_PROV_5000BASET_FULL       BIT(11)
+#define MDIO_AN_VEND_PROV_2500BASET_FULL       BIT(10)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_EN         BIT(4)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK       GENMASK(3, 0)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT       4
@@ -231,9 +233,20 @@ static int aqr_config_aneg(struct phy_device *phydev)
                              phydev->advertising))
                reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
 
+       /* Handle the case when the 2.5G and 5G speeds are not advertised */
+       if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+                             phydev->advertising))
+               reg |= MDIO_AN_VEND_PROV_2500BASET_FULL;
+
+       if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+                             phydev->advertising))
+               reg |= MDIO_AN_VEND_PROV_5000BASET_FULL;
+
        ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
                                     MDIO_AN_VEND_PROV_1000BASET_HALF |
-                                    MDIO_AN_VEND_PROV_1000BASET_FULL, reg);
+                                    MDIO_AN_VEND_PROV_1000BASET_FULL |
+                                    MDIO_AN_VEND_PROV_2500BASET_FULL |
+                                    MDIO_AN_VEND_PROV_5000BASET_FULL, reg);
        if (ret < 0)
                return ret;
        if (ret > 0)