The SPARC architecture is currently unmaintained, remove.
Cc: Francois Retief <fgretief@spaceteq.co.za>
Signed-off-by: Tom Rini <trini@konsulko.com>
new boards should not use this option.
config SYS_TEXT_BASE
- depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
+ depends on ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
(M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE || MIPS || \
ARCH_ZYNQ
depends on !EFI_APP
T: git git://git.denx.de/u-boot-sh.git
F: arch/sh/
-SPARC
-#M: Francois Retief <fgretief@spaceteq.co.za>
-S: Orphaned (Since 2016-02)
-T: git git://git.denx.de/u-boot-sparc.git
-F: arch/sparc/
-
SPI
M: Jagan Teki <jagan@openedev.com>
S: Maintained
/powerpc Files generic to PowerPC architecture
/sandbox Files generic to HW-independent "sandbox"
/sh Files generic to SH architecture
- /sparc Files generic to SPARC architecture
/x86 Files generic to x86 architecture
/api Machine/arch independent API for external apps
/board Board dependent files
bool "SuperH architecture"
select HAVE_PRIVATE_LIBGCC
-config SPARC
- bool "SPARC architecture"
- select CREATE_ARCH_SYMLINK
-
config X86
bool "x86 architecture"
select CREATE_ARCH_SYMLINK
source "arch/powerpc/Kconfig"
source "arch/sandbox/Kconfig"
source "arch/sh/Kconfig"
-source "arch/sparc/Kconfig"
source "arch/x86/Kconfig"
source "arch/xtensa/Kconfig"
+++ /dev/null
-menu "SPARC architecture"
- depends on SPARC
-
-config LEON
- bool
-
-config LEON2
- bool
- select LEON
-
-config LEON3
- bool
- select LEON
-
-config SYS_SPARC_NWINDOWS
- int "Number of SPARC register windows"
- range 2 32
- default "8"
- help
- Specify the number of SPARC register windows implemented by this
- processor. A SPARC implementation can have from 2 to 32 windows.
- If unsure, choose 8.
-
-choice
- prompt "Board select"
- optional
-
-config TARGET_GRSIM_LEON2
- bool "GRSIM simulating a LEON2 board"
- select LEON2
-
-config TARGET_GR_CPCI_AX2000
- bool "Gaisler GR-CPCI-AX2000 board"
- select LEON3
-
-config TARGET_GR_EP2S60
- bool "Gaisler Template design for Altera NIOS board with Stratix EP2S60"
- select LEON3
- help
- Gaisler Research AB's Template design (GPL Open Source SPARC/LEON3
- 96MHz) for Altera NIOS Development board Stratix II edition,
- with the FPGA device EP2S60.
-
-config TARGET_GR_XC3S_1500
- bool "Gaisler GR-XC3S-1500 spartan board"
- select LEON3
-
-config TARGET_GRSIM
- bool "GRSIM simulating a LEON3 GR-XC3S-1500 board"
- select LEON3
-
-endchoice
-
-config SYS_ARCH
- default "sparc"
-
-config SYS_CPU
- default "leon2" if LEON2
- default "leon3" if LEON3
-
-config SYS_VENDOR
- default "gaisler"
-
-source "board/gaisler/gr_cpci_ax2000/Kconfig"
-source "board/gaisler/gr_ep2s60/Kconfig"
-source "board/gaisler/gr_xc3s_1500/Kconfig"
-source "board/gaisler/grsim/Kconfig"
-source "board/gaisler/grsim_leon2/Kconfig"
-
-endmenu
+++ /dev/null
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-head-y := arch/sparc/cpu/$(CPU)/start.o
-
-libs-y += arch/sparc/cpu/$(CPU)/
-libs-y += arch/sparc/lib/
+++ /dev/null
-#
-# (C) Copyright 2015
-# Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := sparc-linux-
-endif
-
-# This GCC compiler is known to work:
-# https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/
-
-gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
-
-CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) \
- -T $(srctree)/examples/standalone/sparc.lds
-
-cpuflags-$(CONFIG_LEON2) := -mcpu=leon
-cpuflags-$(CONFIG_LEON3) := -mcpu=leon3
-
-PLATFORM_CPPFLAGS += $(cpuflags-y)
-
-PLATFORM_RELFLAGS += -fPIC
+++ /dev/null
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-extra-y = start.o
-obj-y = cpu_init.o serial.o cpu.o interrupts.o prom.o
+++ /dev/null
-/* CPU specific code for the LEON2 CPU
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void _reset_reloc(void);
-
-int checkcpu(void)
-{
- /* check LEON version here */
- printf("CPU: LEON2\n");
- return 0;
-}
-
-#ifdef CONFIG_DISPLAY_CPUINFO
-
-int print_cpuinfo(void)
-{
- printf("CPU: LEON2\n");
- return 0;
-}
-
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-void cpu_reset(void)
-{
- /* Interrupts off */
- disable_interrupts();
-
- /* jump to restart in flash */
- _reset_reloc();
-}
-
-int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- cpu_reset();
-
- return 1;
-}
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_GRETH
-int cpu_eth_init(bd_t *bis)
-{
- return greth_initialize(bis);
-}
-#endif
+++ /dev/null
-/* Initializes CPU and basic hardware such as memory
- * controllers, IRQ controller and system timer 0.
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/asi.h>
-#include <asm/leon.h>
-#include <asm/io.h>
-
-#include <config.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers.
- *
- * Run from FLASH/PROM:
- * - until memory controller is set up, only registers available
- * - no global variables available for writing
- * - constants available
- */
-
-void cpu_init_f(void)
-{
- LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-
- /* initialize the IRQMP */
- leon2->Interrupt_Force = 0;
- leon2->Interrupt_Pending = 0;
- leon2->Interrupt_Clear = 0xfffe; /* clear all old pending interrupts */
- leon2->Interrupt_Mask = 0xfffe0000; /* mask all IRQs */
-
- /* cache */
-
- /* I/O port setup */
-#ifdef LEON2_IO_PORT_DIR
- leon2->PIO_Direction = LEON2_IO_PORT_DIR;
-#endif
-#ifdef LEON2_IO_PORT_DATA
- leon2->PIO_Data = LEON2_IO_PORT_DATA;
-#endif
-#ifdef LEON2_IO_PORT_INT
- leon2->PIO_Interrupt = LEON2_IO_PORT_INT;
-#else
- leon2->PIO_Interrupt = 0;
-#endif
-
- /* disable timers */
- leon2->Timer_Control_1 = leon2->Timer_Control_2 = 0;
-}
-
-int arch_cpu_init(void)
-{
- gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
- gd->bus_clk = CONFIG_SYS_CLK_FREQ;
- gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-
- return 0;
-}
-
-/*
- * initialize higher level parts of CPU
- */
-int cpu_init_r(void)
-{
- return 0;
-}
-
-/* initiate and setup timer0 to configured HZ. Base clock is 1MHz.
- */
-int timer_init(void)
-{
- LEON2_regs *leon2 = (LEON2_regs *)LEON2_PREGS;
-
- /* initialize prescaler common to all timers to 1MHz */
- leon2->Scaler_Counter = leon2->Scaler_Reload =
- (((CONFIG_SYS_CLK_FREQ / 1000) + 500) / 1000) - 1;
-
- /* SYS_HZ ticks per second */
- leon2->Timer_Counter_1 = 0;
- leon2->Timer_Reload_1 = (CONFIG_SYS_TIMER_RATE / CONFIG_SYS_HZ) - 1;
- leon2->Timer_Control_1 = LEON2_TIMER_CTRL_EN | LEON2_TIMER_CTRL_RS |
- LEON2_TIMER_CTRL_LD;
-
- CONFIG_SYS_TIMER_COUNTER = (void *)&leon2->Timer_Counter_1;
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
- *
- * (C) Copyright 2006
- * Detlev Zundel, DENX Software Engineering, dzu@denx.de
- *
- * (C) Copyright -2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/stack.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <command.h>
-#include <asm/irq.h>
-
-#include <asm/leon.h>
-
-/* 15 normal irqs and a non maskable interrupt */
-#define NR_IRQS 15
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- unsigned int count;
-};
-
-static struct irq_action irq_handlers[NR_IRQS] = { {0}, };
-static int spurious_irq_cnt = 0;
-static int spurious_irq = 0;
-
-static inline unsigned int leon2_get_irqmask(unsigned int irq)
-{
- if ((irq < 0) || (irq >= NR_IRQS)) {
- return 0;
- } else {
- return (1 << irq);
- }
-}
-
-static void leon2_ic_disable(unsigned int irq)
-{
- unsigned int mask, pil;
- LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-
- pil = intLock();
-
- /* get mask of interrupt */
- mask = leon2_get_irqmask(irq);
-
- /* set int level */
- leon2->Interrupt_Mask =
- SPARC_NOCACHE_READ(&leon2->Interrupt_Mask) & (~mask);
-
- intUnlock(pil);
-}
-
-static void leon2_ic_enable(unsigned int irq)
-{
- unsigned int mask, pil;
- LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-
- pil = intLock();
-
- /* get mask of interrupt */
- mask = leon2_get_irqmask(irq);
-
- /* set int level */
- leon2->Interrupt_Mask =
- SPARC_NOCACHE_READ(&leon2->Interrupt_Mask) | mask;
-
- intUnlock(pil);
-}
-
-void handler_irq(int irq, struct pt_regs *regs)
-{
- if (irq_handlers[irq].handler) {
- if (((unsigned int)irq_handlers[irq].handler > CONFIG_SYS_RAM_END) ||
- ((unsigned int)irq_handlers[irq].handler < CONFIG_SYS_RAM_BASE)
- ) {
- printf("handler_irq: bad handler: %x, irq number %d\n",
- (unsigned int)irq_handlers[irq].handler, irq);
- return;
- }
- irq_handlers[irq].handler(irq_handlers[irq].arg);
- irq_handlers[irq].count++;
- } else {
- spurious_irq_cnt++;
- spurious_irq = irq;
- }
-}
-
-void leon2_force_int(int irq)
-{
- LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-
- if ((irq >= NR_IRQS) || (irq < 0))
- return;
- printf("Forcing interrupt %d\n", irq);
-
- leon2->Interrupt_Force =
- SPARC_NOCACHE_READ(&leon2->Interrupt_Force) | (1 << irq);
-}
-
-/****************************************************************************/
-
-int interrupt_init_cpu(void)
-{
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf("irq_install_handler: bad irq number %d\n", irq);
- return;
- }
-
- if (irq_handlers[irq].handler != NULL)
- printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
- (ulong) handler, (ulong) irq_handlers[irq].handler);
-
- if (((unsigned int)handler > CONFIG_SYS_RAM_END) ||
- ((unsigned int)handler < CONFIG_SYS_RAM_BASE)
- ) {
- printf("irq_install_handler: bad handler: %x, irq number %d\n",
- (unsigned int)handler, irq);
- return;
- }
- irq_handlers[irq].handler = handler;
- irq_handlers[irq].arg = arg;
-
- /* enable irq on LEON2 hardware */
- leon2_ic_enable(irq);
-
-}
-
-void irq_free_handler(int irq)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf("irq_free_handler: bad irq number %d\n", irq);
- return;
- }
-
- /* disable irq on LEON2 hardware */
- leon2_ic_disable(irq);
-
- irq_handlers[irq].handler = NULL;
- irq_handlers[irq].arg = NULL;
-}
-
-/****************************************************************************/
-
-#if defined(CONFIG_CMD_IRQ)
-void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char * const argv[])
-{
- int irq;
- unsigned int pil = get_pil();
- printf("PIL level: %u\n\r", pil);
- printf("Spurious IRQ: %u, last unknown IRQ: %d\n",
- spurious_irq_cnt, spurious_irq);
-
- puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n");
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- if (irq_handlers[irq].handler != NULL) {
- printf("%02d %p %p %d\n", irq,
- irq_handlers[irq].handler,
- irq_handlers[irq].arg,
- irq_handlers[irq].count);
- }
- }
-}
-#endif
+++ /dev/null
-/* prom.c - emulates a sparc v0 PROM for the linux kernel.
- *
- * Copyright (C) 2003 Konrad Eisele <eiselekd@web.de>
- * Copyright (C) 2004 Stefan Holst <mail@s-holst.de>
- * Copyright (C) 2007 Daniel Hellstrom <daniel@gaisler.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/prom.h>
-#include <asm/machines.h>
-#include <asm/srmmu.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/leon.h>
-
-#include <config.h>
-/*
-#define PRINT_ROM_VEC
-*/
-extern struct linux_romvec *kernel_arg_promvec;
-
-#define PROM_PGT __attribute__ ((__section__ (".prom.pgt")))
-#define PROM_TEXT __attribute__ ((__section__ (".prom.text")))
-#define PROM_DATA __attribute__ ((__section__ (".prom.data")))
-
-void *__prom_start_reloc; /* relocated prom_start address */
-
-/* for __va */
-extern int __prom_start;
-#define PAGE_OFFSET 0xf0000000
-#define phys_base CONFIG_SYS_SDRAM_BASE
-#define PROM_OFFS 8192
-#define PROM_SIZE_MASK (PROM_OFFS-1)
-#define __va(x) ( \
- (void *)( ((unsigned long)(x))-PROM_OFFS+ \
- (CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-CONFIG_SYS_TEXT_BASE ) \
- )
-#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-CONFIG_SYS_TEXT_BASE))
-
-struct property {
- char *name;
- char *value;
- int length;
-};
-
-struct node {
- int level;
- struct property *properties;
-};
-
-static void leon_reboot(char *bcommand);
-static void leon_halt(void);
-static int leon_nbputchar(int c);
-static int leon_nbgetchar(void);
-
-static int no_nextnode(int node);
-static int no_child(int node);
-static int no_proplen(int node, char *name);
-static int no_getprop(int node, char *name, char *value);
-static int no_setprop(int node, char *name, char *value, int len);
-static char *no_nextprop(int node, char *name);
-
-static struct property PROM_TEXT *find_property(int node, char *name);
-static int PROM_TEXT leon_strcmp(const char *s1, const char *s2);
-static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n);
-static void PROM_TEXT leon_reboot_physical(char *bcommand);
-
-void __inline__ leon_flush_cache_all(void)
-{
- __asm__ __volatile__(" flush ");
- __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_DFLUSH):"memory");
-}
-
-void __inline__ leon_flush_tlb_all(void)
-{
- leon_flush_cache_all();
- __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x400),
- "i"(ASI_MMUFLUSH):"memory");
-}
-
-typedef struct {
- unsigned int ctx_table[256];
- unsigned int pgd_table[256];
-} sparc_srmmu_setup;
-
-sparc_srmmu_setup srmmu_tables PROM_PGT = {
- {0},
- {0x1e,
- 0x10001e,
- 0x20001e,
- 0x30001e,
- 0x40001e,
- 0x50001e,
- 0x60001e,
- 0x70001e,
- 0x80001e,
- 0x90001e,
- 0xa0001e,
- 0xb0001e,
- 0xc0001e,
- 0xd0001e,
- 0xe0001e,
- 0xf0001e,
- 0x100001e,
- 0x110001e,
- 0x120001e,
- 0x130001e,
- 0x140001e,
- 0x150001e,
- 0x160001e,
- 0x170001e,
- 0x180001e,
- 0x190001e,
- 0x1a0001e,
- 0x1b0001e,
- 0x1c0001e,
- 0x1d0001e,
- 0x1e0001e,
- 0x1f0001e,
- 0x200001e,
- 0x210001e,
- 0x220001e,
- 0x230001e,
- 0x240001e,
- 0x250001e,
- 0x260001e,
- 0x270001e,
- 0x280001e,
- 0x290001e,
- 0x2a0001e,
- 0x2b0001e,
- 0x2c0001e,
- 0x2d0001e,
- 0x2e0001e,
- 0x2f0001e,
- 0x300001e,
- 0x310001e,
- 0x320001e,
- 0x330001e,
- 0x340001e,
- 0x350001e,
- 0x360001e,
- 0x370001e,
- 0x380001e,
- 0x390001e,
- 0x3a0001e,
- 0x3b0001e,
- 0x3c0001e,
- 0x3d0001e,
- 0x3e0001e,
- 0x3f0001e,
- 0x400001e,
- 0x410001e,
- 0x420001e,
- 0x430001e,
- 0x440001e,
- 0x450001e,
- 0x460001e,
- 0x470001e,
- 0x480001e,
- 0x490001e,
- 0x4a0001e,
- 0x4b0001e,
- 0x4c0001e,
- 0x4d0001e,
- 0x4e0001e,
- 0x4f0001e,
- 0x500001e,
- 0x510001e,
- 0x520001e,
- 0x530001e,
- 0x540001e,
- 0x550001e,
- 0x560001e,
- 0x570001e,
- 0x580001e,
- 0x590001e,
- 0x5a0001e,
- 0x5b0001e,
- 0x5c0001e,
- 0x5d0001e,
- 0x5e0001e,
- 0x5f0001e,
- 0x600001e,
- 0x610001e,
- 0x620001e,
- 0x630001e,
- 0x640001e,
- 0x650001e,
- 0x660001e,
- 0x670001e,
- 0x680001e,
- 0x690001e,
- 0x6a0001e,
- 0x6b0001e,
- 0x6c0001e,
- 0x6d0001e,
- 0x6e0001e,
- 0x6f0001e,
- 0x700001e,
- 0x710001e,
- 0x720001e,
- 0x730001e,
- 0x740001e,
- 0x750001e,
- 0x760001e,
- 0x770001e,
- 0x780001e,
- 0x790001e,
- 0x7a0001e,
- 0x7b0001e,
- 0x7c0001e,
- 0x7d0001e,
- 0x7e0001e,
- 0x7f0001e,
- 0x800001e,
- 0x810001e,
- 0x820001e,
- 0x830001e,
- 0x840001e,
- 0x850001e,
- 0x860001e,
- 0x870001e,
- 0x880001e,
- 0x890001e,
- 0x8a0001e,
- 0x8b0001e,
- 0x8c0001e,
- 0x8d0001e,
- 0x8e0001e,
- 0x8f0001e,
- 0x900001e,
- 0x910001e,
- 0x920001e,
- 0x930001e,
- 0x940001e,
- 0x950001e,
- 0x960001e,
- 0x970001e,
- 0x980001e,
- 0x990001e,
- 0x9a0001e,
- 0x9b0001e,
- 0x9c0001e,
- 0x9d0001e,
- 0x9e0001e,
- 0x9f0001e,
- 0xa00001e,
- 0xa10001e,
- 0xa20001e,
- 0xa30001e,
- 0xa40001e,
- 0xa50001e,
- 0xa60001e,
- 0xa70001e,
- 0xa80001e,
- 0xa90001e,
- 0xaa0001e,
- 0xab0001e,
- 0xac0001e,
- 0xad0001e,
- 0xae0001e,
- 0xaf0001e,
- 0xb00001e,
- 0xb10001e,
- 0xb20001e,
- 0xb30001e,
- 0xb40001e,
- 0xb50001e,
- 0xb60001e,
- 0xb70001e,
- 0xb80001e,
- 0xb90001e,
- 0xba0001e,
- 0xbb0001e,
- 0xbc0001e,
- 0xbd0001e,
- 0xbe0001e,
- 0xbf0001e,
- 0xc00001e,
- 0xc10001e,
- 0xc20001e,
- 0xc30001e,
- 0xc40001e,
- 0xc50001e,
- 0xc60001e,
- 0xc70001e,
- 0xc80001e,
- 0xc90001e,
- 0xca0001e,
- 0xcb0001e,
- 0xcc0001e,
- 0xcd0001e,
- 0xce0001e,
- 0xcf0001e,
- 0xd00001e,
- 0xd10001e,
- 0xd20001e,
- 0xd30001e,
- 0xd40001e,
- 0xd50001e,
- 0xd60001e,
- 0xd70001e,
- 0xd80001e,
- 0xd90001e,
- 0xda0001e,
- 0xdb0001e,
- 0xdc0001e,
- 0xdd0001e,
- 0xde0001e,
- 0xdf0001e,
- 0xe00001e,
- 0xe10001e,
- 0xe20001e,
- 0xe30001e,
- 0xe40001e,
- 0xe50001e,
- 0xe60001e,
- 0xe70001e,
- 0xe80001e,
- 0xe90001e,
- 0xea0001e,
- 0xeb0001e,
- 0xec0001e,
- 0xed0001e,
- 0xee0001e,
- 0xef0001e,
- 0x400001e /* default */
- }
-};
-
-/* a self contained prom info structure */
-struct leon_reloc_func {
- struct property *(*find_property) (int node, char *name);
- int (*strcmp) (char *s1, char *s2);
- void *(*memcpy) (void *dest, const void *src, size_t n);
- void (*reboot_physical) (char *cmd);
-};
-
-struct leon_prom_info {
- int freq_khz;
- int leon_nctx;
- int mids[32];
- int baudrates[2];
- struct leon_reloc_func reloc_funcs;
- struct property root_properties[4];
- struct property cpu_properties[7];
-#undef CPUENTRY
-#define CPUENTRY(idx) struct property cpu_properties##idx[4]
- CPUENTRY(1);
- CPUENTRY(2);
- CPUENTRY(3);
- CPUENTRY(4);
- CPUENTRY(5);
- CPUENTRY(6);
- CPUENTRY(7);
- CPUENTRY(8);
- CPUENTRY(9);
- CPUENTRY(10);
- CPUENTRY(11);
- CPUENTRY(12);
- CPUENTRY(13);
- CPUENTRY(14);
- CPUENTRY(15);
- CPUENTRY(16);
- CPUENTRY(17);
- CPUENTRY(18);
- CPUENTRY(19);
- CPUENTRY(20);
- CPUENTRY(21);
- CPUENTRY(22);
- CPUENTRY(23);
- CPUENTRY(24);
- CPUENTRY(25);
- CPUENTRY(26);
- CPUENTRY(27);
- CPUENTRY(28);
- CPUENTRY(29);
- CPUENTRY(30);
- CPUENTRY(31);
- struct idprom idprom;
- struct linux_nodeops nodeops;
- struct linux_mlist_v0 *totphys_p;
- struct linux_mlist_v0 totphys;
- struct linux_mlist_v0 *avail_p;
- struct linux_mlist_v0 avail;
- struct linux_mlist_v0 *prommap_p;
- void (*synchook) (void);
- struct linux_arguments_v0 *bootargs_p;
- struct linux_arguments_v0 bootargs;
- struct linux_romvec romvec;
- struct node nodes[35];
- char s_device_type[12];
- char s_cpu[4];
- char s_mid[4];
- char s_idprom[7];
- char s_compatability[14];
- char s_leon2[6];
- char s_mmu_nctx[9];
- char s_frequency[16];
- char s_uart1_baud[11];
- char s_uart2_baud[11];
- char arg[256];
-};
-
-/* static prom info */
-static struct leon_prom_info PROM_DATA spi = {
- CONFIG_SYS_CLK_FREQ / 1000,
- 256,
- {
-#undef CPUENTRY
-#define CPUENTRY(idx) idx
- CPUENTRY(0),
- CPUENTRY(1),
- CPUENTRY(2),
- CPUENTRY(3),
- CPUENTRY(4),
- CPUENTRY(5),
- CPUENTRY(6),
- CPUENTRY(7),
- CPUENTRY(8),
- CPUENTRY(9),
- CPUENTRY(10),
- CPUENTRY(11),
- CPUENTRY(12),
- CPUENTRY(13),
- CPUENTRY(14),
- CPUENTRY(15),
- CPUENTRY(16),
- CPUENTRY(17),
- CPUENTRY(18),
- CPUENTRY(19),
- CPUENTRY(20),
- CPUENTRY(21),
- CPUENTRY(22),
- CPUENTRY(23),
- CPUENTRY(24),
- CPUENTRY(25),
- CPUENTRY(26),
- CPUENTRY(27),
- CPUENTRY(28),
- CPUENTRY(29),
- CPUENTRY(30),
- 31},
- {38400, 38400},
- {
- __va(find_property),
- __va(leon_strcmp),
- __va(leon_memcpy),
- __phy(leon_reboot_physical),
- },
- {
- {__va(spi.s_device_type), __va(spi.s_idprom), 4},
- {__va(spi.s_idprom), (char *)__va(&spi.idprom), sizeof(struct idprom)},
- {__va(spi.s_compatability), __va(spi.s_leon2), 5},
- {NULL, NULL, -1}
- },
- {
- {__va(spi.s_device_type), __va(spi.s_cpu), 4},
- {__va(spi.s_mid), __va(&spi.mids[0]), 4},
- {__va(spi.s_mmu_nctx), (char *)__va(&spi.leon_nctx), 4},
- {__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4},
- {__va(spi.s_uart1_baud), (char *)__va(&spi.baudrates[0]), 4},
- {__va(spi.s_uart2_baud), (char *)__va(&spi.baudrates[1]), 4},
- {NULL, NULL, -1}
- },
-#undef CPUENTRY
-#define CPUENTRY(idx) \
- { /* cpu_properties */ \
- {__va(spi.s_device_type), __va(spi.s_cpu), 4}, \
- {__va(spi.s_mid), __va(&spi.mids[idx]), 4}, \
- {__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4}, \
- {NULL, NULL, -1} \
- }
- CPUENTRY(1),
- CPUENTRY(2),
- CPUENTRY(3),
- CPUENTRY(4),
- CPUENTRY(5),
- CPUENTRY(6),
- CPUENTRY(7),
- CPUENTRY(8),
- CPUENTRY(9),
- CPUENTRY(10),
- CPUENTRY(11),
- CPUENTRY(12),
- CPUENTRY(13),
- CPUENTRY(14),
- CPUENTRY(15),
- CPUENTRY(16),
- CPUENTRY(17),
- CPUENTRY(18),
- CPUENTRY(19),
- CPUENTRY(20),
- CPUENTRY(21),
- CPUENTRY(22),
- CPUENTRY(23),
- CPUENTRY(24),
- CPUENTRY(25),
- CPUENTRY(26),
- CPUENTRY(27),
- CPUENTRY(28),
- CPUENTRY(29),
- CPUENTRY(30),
- CPUENTRY(31),
- {
- 0x01, /* format */
- M_LEON2 | M_LEON2_SOC, /* machine type */
- {0, 0, 0, 0, 0, 0}, /* eth */
- 0, /* date */
- 0, /* sernum */
- 0, /* checksum */
- {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* reserved */
- },
- {
- __va(no_nextnode),
- __va(no_child),
- __va(no_proplen),
- __va(no_getprop),
- __va(no_setprop),
- __va(no_nextprop)
- },
- __va(&spi.totphys),
- {
- NULL,
- (char *)CONFIG_SYS_SDRAM_BASE,
- 0,
- },
- __va(&spi.avail),
- {
- NULL,
- (char *)CONFIG_SYS_SDRAM_BASE,
- 0,
- },
- NULL, /* prommap_p */
- NULL,
- __va(&spi.bootargs),
- {
- {NULL, __va(spi.arg), NULL /*... */ },
- /*... */
- },
- {
- 0,
- 0, /* sun4c v0 prom */
- 0, 0,
- {__va(&spi.totphys_p), __va(&spi.prommap_p), __va(&spi.avail_p)},
- __va(&spi.nodeops),
- NULL, {NULL /* ... */ },
- NULL, NULL,
- NULL, NULL, /* pv_getchar, pv_putchar */
- __va(leon_nbgetchar), __va(leon_nbputchar),
- NULL,
- __va(leon_reboot),
- NULL,
- NULL,
- NULL,
- __va(leon_halt),
- __va(&spi.synchook),
- {NULL},
- __va(&spi.bootargs_p)
- /*... */
- },
- {
- {0, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ },
- {0, __va(spi.root_properties)},
- /* cpu 0, must be spi.nodes[2] see leon_prom_init() */
- {1, __va(spi.cpu_properties)},
-
-#undef CPUENTRY
-#define CPUENTRY(idx) \
- {1, __va(spi.cpu_properties##idx) } /* cpu <idx> */
- CPUENTRY(1),
- CPUENTRY(2),
- CPUENTRY(3),
- CPUENTRY(4),
- CPUENTRY(5),
- CPUENTRY(6),
- CPUENTRY(7),
- CPUENTRY(8),
- CPUENTRY(9),
- CPUENTRY(10),
- CPUENTRY(11),
- CPUENTRY(12),
- CPUENTRY(13),
- CPUENTRY(14),
- CPUENTRY(15),
- CPUENTRY(16),
- CPUENTRY(17),
- CPUENTRY(18),
- CPUENTRY(19),
- CPUENTRY(20),
- CPUENTRY(21),
- CPUENTRY(22),
- CPUENTRY(23),
- CPUENTRY(24),
- CPUENTRY(25),
- CPUENTRY(26),
- CPUENTRY(27),
- CPUENTRY(28),
- CPUENTRY(29),
- CPUENTRY(30),
- CPUENTRY(31),
- {-1, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ }
- },
- "device_type",
- "cpu",
- "mid",
- "idprom",
- "compatability",
- "leon2",
- "mmu-nctx",
- "clock-frequency",
- "uart1_baud",
- "uart2_baud",
- CONFIG_DEFAULT_KERNEL_COMMAND_LINE
-};
-
-/* from arch/sparc/kernel/setup.c */
-#define RAMDISK_LOAD_FLAG 0x4000
-extern unsigned short root_flags;
-extern unsigned short root_dev;
-extern unsigned short ram_flags;
-extern unsigned int sparc_ramdisk_image;
-extern unsigned int sparc_ramdisk_size;
-extern int root_mountflags;
-
-extern char initrd_end, initrd_start;
-
-/* Reboot the CPU = jump to beginning of flash again.
- *
- * Make sure that all function are inlined here.
- */
-static void PROM_TEXT leon_reboot(char *bcommand)
-{
- register char *arg = bcommand;
- void __attribute__ ((noreturn)) (*reboot_physical) (char *cmd);
-
- /* get physical address */
- struct leon_prom_info *pspi =
- (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- unsigned int *srmmu_ctx_table;
-
- /* Turn of Interrupts */
- set_pil(0xf);
-
- /* Set kernel's context, context zero */
- srmmu_set_context(0);
-
- /* Get physical address of the MMU shutdown routine */
- reboot_physical = (void *)
- SPARC_BYPASS_READ(&pspi->reloc_funcs.reboot_physical);
-
- /* Now that we know the physical address of the function
- * we can make the MMU allow jumping to it.
- */
- srmmu_ctx_table = (unsigned int *)srmmu_get_ctable_ptr();
-
- srmmu_ctx_table = (unsigned int *)SPARC_BYPASS_READ(srmmu_ctx_table);
-
- /* get physical address of kernel's context table (assume ptd) */
- srmmu_ctx_table = (unsigned int *)
- (((unsigned int)srmmu_ctx_table & 0xfffffffc) << 4);
-
- /* enable access to physical address of MMU shutdown function */
- SPARC_BYPASS_WRITE(&srmmu_ctx_table
- [((unsigned int)reboot_physical) >> 24],
- (((unsigned int)reboot_physical & 0xff000000) >> 4) |
- 0x1e);
-
- /* flush TLB cache */
- leon_flush_tlb_all();
-
- /* flash instruction & data cache */
- sparc_icache_flush_all();
- sparc_dcache_flush_all();
-
- /* jump to physical address function
- * so that when the MMU is disabled
- * we can continue to execute
- */
- reboot_physical(arg);
-}
-
-static void PROM_TEXT leon_reboot_physical(char *bcommand)
-{
- void __attribute__ ((noreturn)) (*reset) (void);
-
- /* Turn off MMU */
- srmmu_set_mmureg(0);
-
- /* Hardcoded start address */
- reset = CONFIG_SYS_MONITOR_BASE;
-
- /* flush data cache */
- sparc_dcache_flush_all();
-
- /* flush instruction cache */
- sparc_icache_flush_all();
-
- /* Jump to start in Flash */
- reset();
-}
-
-static void PROM_TEXT leon_halt(void)
-{
- while (1) ;
-}
-
-/* get single char, don't care for blocking*/
-static int PROM_TEXT leon_nbgetchar(void)
-{
- return -1;
-}
-
-/* put single char, don't care for blocking*/
-static int PROM_TEXT leon_nbputchar(int c)
-{
- LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-
- /***** put char in buffer... ***********
- * Make sure all functions are inline! *
- ***************************************/
-
- /* Wait for last character to go. */
- while (!(SPARC_BYPASS_READ(&leon2->UART_Status_1)
- & LEON2_UART_STAT_THE)) ;
-
- /* Send data */
- SPARC_BYPASS_WRITE(&leon2->UART_Channel_1, c);
-
- /* Wait for data to be sent */
- while (!(SPARC_BYPASS_READ(&leon2->UART_Status_1)
- & LEON2_UART_STAT_TSE)) ;
-
- return 0;
-}
-
-/* node ops */
-
-/*#define nodes ((struct node *)__va(&pspi->nodes))*/
-#define nodes ((struct node *)(pspi->nodes))
-
-static int PROM_TEXT no_nextnode(int node)
-{
- /* get physical address */
- struct leon_prom_info *pspi =
- (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- if (nodes[node].level == nodes[node + 1].level)
- return node + 1;
- return -1;
-}
-
-static int PROM_TEXT no_child(int node)
-{
- /* get physical address */
- struct leon_prom_info *pspi = (struct leon_prom_info *)
- (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- if (nodes[node].level == nodes[node + 1].level - 1)
- return node + 1;
- return -1;
-}
-
-static struct property PROM_TEXT *find_property(int node, char *name)
-{
- /* get physical address */
- struct leon_prom_info *pspi = (struct leon_prom_info *)
- (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- struct property *prop = &nodes[node].properties[0];
- while (prop && prop->name) {
- if (pspi->reloc_funcs.strcmp(prop->name, name) == 0)
- return prop;
- prop++;
- }
- return NULL;
-}
-
-static int PROM_TEXT no_proplen(int node, char *name)
-{
- /* get physical address */
- struct leon_prom_info *pspi = (struct leon_prom_info *)
- (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- struct property *prop = pspi->reloc_funcs.find_property(node, name);
- if (prop)
- return prop->length;
- return -1;
-}
-
-static int PROM_TEXT no_getprop(int node, char *name, char *value)
-{
- /* get physical address */
- struct leon_prom_info *pspi = (struct leon_prom_info *)
- (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- struct property *prop = pspi->reloc_funcs.find_property(node, name);
- if (prop) {
- pspi->reloc_funcs.memcpy(value, prop->value, prop->length);
- return 1;
- }
- return -1;
-}
-
-static int PROM_TEXT no_setprop(int node, char *name, char *value, int len)
-{
- return -1;
-}
-
-static char PROM_TEXT *no_nextprop(int node, char *name)
-{
- /* get physical address */
- struct leon_prom_info *pspi = (struct leon_prom_info *)
- (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
- struct property *prop;
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- if (!name || !name[0])
- return nodes[node].properties[0].name;
-
- prop = pspi->reloc_funcs.find_property(node, name);
- if (prop)
- return prop[1].name;
- return NULL;
-}
-
-static int PROM_TEXT leon_strcmp(const char *s1, const char *s2)
-{
- register char result;
-
- while (1) {
- result = *s1 - *s2;
- if (result || !*s1)
- break;
- s2++;
- s1++;
- }
-
- return result;
-}
-
-static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n)
-{
- char *dst = (char *)dest, *source = (char *)src;
-
- while (n--) {
- *dst = *source;
- dst++;
- source++;
- }
- return dest;
-}
-
-#define GETREGSP(sp) __asm__ __volatile__("mov %%sp, %0" : "=r" (sp))
-
-void leon_prom_init(struct leon_prom_info *pspi)
-{
- unsigned long i;
- unsigned char cksum, *ptr;
- char *addr_str, *end;
- unsigned long sp;
- GETREGSP(sp);
-
- pspi->freq_khz = CONFIG_SYS_CLK_FREQ / 1000;
-
- /* Set Available main memory size */
- pspi->totphys.num_bytes = CONFIG_SYS_PROM_OFFSET - CONFIG_SYS_SDRAM_BASE;
- pspi->avail.num_bytes = pspi->totphys.num_bytes;
-
-#undef nodes
- pspi->nodes[3].level = -1;
- pspi->nodes[3].properties = __va(spi.root_properties + 3);
-
- /* Set Ethernet MAC address from environment */
- if ((addr_str = getenv("ethaddr")) != NULL) {
- for (i = 0; i < 6; i++) {
- pspi->idprom.id_ethaddr[i] = addr_str ?
- simple_strtoul(addr_str, &end, 16) : 0;
- if (addr_str) {
- addr_str = (*end) ? end + 1 : end;
- }
- }
- } else {
- /* HW Address not found in environment,
- * Set default HW address
- */
- pspi->idprom.id_ethaddr[0] = 0;
- pspi->idprom.id_ethaddr[1] = 0;
- pspi->idprom.id_ethaddr[2] = 0;
- pspi->idprom.id_ethaddr[3] = 0;
- pspi->idprom.id_ethaddr[4] = 0;
- pspi->idprom.id_ethaddr[5] = 0;
- }
-
- ptr = (unsigned char *)&pspi->idprom;
- for (i = cksum = 0; i <= 0x0E; i++)
- cksum ^= *ptr++;
- pspi->idprom.id_cksum = cksum;
-}
-
-static inline void set_cache(unsigned long regval)
-{
- asm volatile ("sta %0, [%%g0] %1\n\t":: "r" (regval), "i"(2):"memory");
-}
-
-extern unsigned short bss_start, bss_end;
-
-/* mark as section .img.main.text, to be referenced in linker script */
-int prom_init(void)
-{
- struct leon_prom_info *pspi = (void *)
- ((((unsigned int)&spi) & PROM_SIZE_MASK) + CONFIG_SYS_PROM_OFFSET);
-
- /* disable mmu */
- srmmu_set_mmureg(0x00000000);
- __asm__ __volatile__("flush\n\t");
-
- /* init prom info struct */
- leon_prom_init(pspi);
-
- kernel_arg_promvec = &pspi->romvec;
-#ifdef PRINT_ROM_VEC
- printf("Kernel rom vec: 0x%lx\n", (unsigned int)(&pspi->romvec));
-#endif
- return 0;
-}
-
-/* Copy current kernel boot argument to ROMvec */
-void prepare_bootargs(char *bootargs)
-{
- struct leon_prom_info *pspi;
- char *src, *dst;
- int left;
-
- /* if no bootargs set, skip copying ==> default bootline */
- if (bootargs && (*bootargs != '\0')) {
- pspi = (void *)((((unsigned int)&spi) & PROM_SIZE_MASK) +
- CONFIG_SYS_PROM_OFFSET);
- src = bootargs;
- dst = &pspi->arg[0];
- left = 255; /* max len */
- while (*src && left > 0) {
- *dst++ = *src++;
- left--;
- }
- /* terminate kernel command line string */
- *dst = 0;
- }
-}
-
-void srmmu_init_cpu(unsigned int entry)
-{
- sparc_srmmu_setup *psrmmu_tables = (void *)
- ((((unsigned int)&srmmu_tables) & PROM_SIZE_MASK) +
- CONFIG_SYS_PROM_OFFSET);
-
- /* Make context 0 (kernel's context) point
- * to our prepared memory mapping
- */
-#define PTD 1
- psrmmu_tables->ctx_table[0] =
- ((unsigned int)&psrmmu_tables->pgd_table[0x00]) >> 4 | PTD;
-
- /* Set virtual kernel address 0xf0000000
- * to SRAM/SDRAM address.
- * Make it READ/WRITE/EXEC to SuperUser
- */
-#define PTE 2
-#define ACC_SU_ALL 0x1c
- psrmmu_tables->pgd_table[0xf0] =
- (CONFIG_SYS_SDRAM_BASE >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf1] =
- ((CONFIG_SYS_SDRAM_BASE + 0x1000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf2] =
- ((CONFIG_SYS_SDRAM_BASE + 0x2000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf3] =
- ((CONFIG_SYS_SDRAM_BASE + 0x3000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf4] =
- ((CONFIG_SYS_SDRAM_BASE + 0x4000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf5] =
- ((CONFIG_SYS_SDRAM_BASE + 0x5000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf6] =
- ((CONFIG_SYS_SDRAM_BASE + 0x6000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf7] =
- ((CONFIG_SYS_SDRAM_BASE + 0x7000000) >> 4) | ACC_SU_ALL | PTE;
-
- /* convert rom vec pointer to virtual address */
- kernel_arg_promvec = (struct linux_romvec *)
- (((unsigned int)kernel_arg_promvec & 0x0fffffff) | 0xf0000000);
-
- /* Set Context pointer to point to context table
- * 256 contexts supported.
- */
- srmmu_set_ctable_ptr((unsigned int)&psrmmu_tables->ctx_table[0]);
-
- /* Set kernel's context, context zero */
- srmmu_set_context(0);
-
- /* Invalidate all Cache */
- __asm__ __volatile__("flush\n\t");
-
- srmmu_set_mmureg(0x00000001);
- leon_flush_tlb_all();
- leon_flush_cache_all();
-}
+++ /dev/null
-/* GRLIB APBUART Serial controller driver
- *
- * (C) Copyright 2008, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <serial.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static unsigned leon2_serial_calc_scaler(unsigned freq, unsigned baud)
-{
- return (((freq*10) / (baud*8)) - 5) / 10;
-}
-
-static int leon2_serial_init(void)
-{
- LEON2_regs *leon2 = (LEON2_regs *)LEON2_PREGS;
- LEON2_Uart_regs *regs;
- unsigned int tmp;
-
-#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
- regs = (LEON2_Uart_regs *)&leon2->UART_Channel_1;
-#else
- regs = (LEON2_Uart_regs *)&leon2->UART_Channel_2;
-#endif
-
- /* Set scaler / baud rate */
- tmp = leon2_serial_calc_scaler(CONFIG_SYS_CLK_FREQ, CONFIG_BAUDRATE);
- writel(tmp, ®s->UART_Scaler);
-
- /* Let bit 11 be unchanged (debug bit for GRMON) */
- tmp = readl(®s->UART_Control) & LEON2_UART_CTRL_DBG;
- tmp |= (LEON2_UART1_LOOPBACK_ENABLE << 7);
- tmp |= (LEON2_UART1_FLOWCTRL_ENABLE << 6);
- tmp |= (LEON2_UART1_PARITY_ENABLE << 5);
- tmp |= (LEON2_UART1_ODDPAR_ENABLE << 4);
- /* Receiver & transmitter enable */
- tmp |= (LEON2_UART_CTRL_RE | LEON2_UART_CTRL_TE);
- writel(tmp, ®s->UART_Control);
-
- gd->arch.uart = regs;
- return 0;
-}
-
-static inline LEON2_Uart_regs *leon2_get_uart_regs(void)
-{
- LEON2_Uart_regs *uart = gd->arch.uart;
-
- return uart;
-}
-
-static void leon2_serial_putc_raw(const char c)
-{
- LEON2_Uart_regs *uart = leon2_get_uart_regs();
-
- if (!uart)
- return;
-
- /* Wait for last character to go. */
- while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_THE))
- WATCHDOG_RESET();
-
- /* Send data */
- writel(c, &uart->UART_Channel);
-
-#ifdef LEON_DEBUG
- /* Wait for data to be sent */
- while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_TSE))
- WATCHDOG_RESET();
-#endif
-}
-
-static void leon2_serial_putc(const char c)
-{
- if (c == '\n')
- leon2_serial_putc_raw('\r');
-
- leon2_serial_putc_raw(c);
-}
-
-static int leon2_serial_getc(void)
-{
- LEON2_Uart_regs *uart = leon2_get_uart_regs();
-
- if (!uart)
- return 0;
-
- /* Wait for a character to arrive. */
- while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_DR))
- WATCHDOG_RESET();
-
- /* Read character data */
- return readl(&uart->UART_Channel);
-}
-
-static int leon2_serial_tstc(void)
-{
- LEON2_Uart_regs *uart = leon2_get_uart_regs();
-
- if (!uart)
- return 0;
-
- return readl(&uart->UART_Status) & LEON2_UART_STAT_DR;
-}
-
-static void leon2_serial_setbrg(void)
-{
- LEON2_Uart_regs *uart = leon2_get_uart_regs();
- unsigned int scaler;
-
- if (!uart)
- return;
-
- if (!gd->baudrate)
- gd->baudrate = CONFIG_BAUDRATE;
-
- scaler = leon2_serial_calc_scaler(CONFIG_SYS_CLK_FREQ, gd->baudrate);
-
- writel(scaler, &uart->UART_Scaler);
-}
-
-static struct serial_device leon2_serial_drv = {
- .name = "leon2_serial",
- .start = leon2_serial_init,
- .stop = NULL,
- .setbrg = leon2_serial_setbrg,
- .putc = leon2_serial_putc,
- .puts = default_serial_puts,
- .getc = leon2_serial_getc,
- .tstc = leon2_serial_tstc,
-};
-
-void leon2_serial_initialize(void)
-{
- serial_register(&leon2_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &leon2_serial_drv;
-}
+++ /dev/null
-/* This is where the SPARC/LEON3 starts
- *
- * Copyright (C) 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/asmmacro.h>
-#include <asm/winmacro.h>
-#include <asm/psr.h>
-#include <asm/stack.h>
-#include <asm/leon.h>
-
-/* Entry for traps which jump to a programmer-specified trap handler. */
-#define TRAPR(H) \
- wr %g0, 0xfe0, %psr; \
- mov %g0, %tbr; \
- ba (H); \
- mov %g0, %wim;
-
-#define TRAP(H) \
- mov %psr, %l0; \
- ba (H); \
- nop; nop;
-
-#define TRAPI(ilevel) \
- mov ilevel, %l7; \
- mov %psr, %l0; \
- b _irq_entry; \
- mov %wim, %l3
-
-/* Unexcpected trap will halt the processor by forcing it to error state */
-#undef BAD_TRAP
-#define BAD_TRAP ta 0; nop; nop; nop;
-
-/* Software trap. Treat as BAD_TRAP for the time being... */
-#define SOFT_TRAP TRAP(_hwerr)
-
-#define PSR_INIT 0x1FC0 /* Disable traps, set s and ps */
-#define WIM_INIT 2
-
-/* All traps low-level code here must end with this macro. */
-#define RESTORE_ALL b ret_trap_entry; clr %l6;
-
-#define WRITE_PAUSE nop;nop;nop
-
-WINDOWSIZE = (16 * 4)
-ARGPUSHSIZE = (6 * 4)
-ARGPUSH = (WINDOWSIZE + 4)
-MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
-
-/* Number of register windows */
-#ifndef CONFIG_SYS_SPARC_NWINDOWS
-#error Must define number of SPARC register windows, default is 8
-#endif
-
-/* Macros to load address into a register. Uses GOT table for PIC */
-#ifdef __PIC__
-
-#define SPARC_PIC_THUNK_CALL(reg) \
- sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \
- call __sparc_get_pc_thunk.reg; \
- add %##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg;
-
-#define SPARC_LOAD_ADDRESS(sym, got, reg) \
- sethi %gdop_hix22(sym), %##reg; \
- xor %##reg, %gdop_lox10(sym), %##reg; \
- ld [%##got + %##reg], %##reg, %gdop(sym);
-
-#else
-
-#define SPARC_PIC_THUNK_CALL(reg)
-#define SPARC_LOAD_ADDRESS(sym, got, tmp) \
- set sym, %##reg;
-
-#endif
-
-#define STACK_ALIGN 8
-#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
-
- .section ".start", "ax"
- .globl _start, start, _trap_table
- .globl _irq_entry, nmi_trap
- .globl _reset_reloc
-
-/* at address 0
- * Hardware traps
- */
-start:
-_start:
-_trap_table:
- TRAPR(_hardreset); ! 00 reset trap
- BAD_TRAP; ! 01 instruction_access_exception
- BAD_TRAP; ! 02 illegal_instruction
- BAD_TRAP; ! 03 priveleged_instruction
- BAD_TRAP; ! 04 fp_disabled
- TRAP(_window_overflow); ! 05 window_overflow
- TRAP(_window_underflow); ! 06 window_underflow
- BAD_TRAP; ! 07 Memory Address Not Aligned
- BAD_TRAP; ! 08 Floating Point Exception
- BAD_TRAP; ! 09 Data Miss Exception
- BAD_TRAP; ! 0a Tagged Instruction Ovrflw
- BAD_TRAP; ! 0b Watchpoint Detected
- BAD_TRAP; ! 0c
- BAD_TRAP; ! 0d
- BAD_TRAP; ! 0e
- BAD_TRAP; ! 0f
- BAD_TRAP; ! 10
- TRAPI(1); ! 11 IRQ level 1
- TRAPI(2); ! 12 IRQ level 2
- TRAPI(3); ! 13 IRQ level 3
- TRAPI(4); ! 14 IRQ level 4
- TRAPI(5); ! 15 IRQ level 5
- TRAPI(6); ! 16 IRQ level 6
- TRAPI(7); ! 17 IRQ level 7
- TRAPI(8); ! 18 IRQ level 8
- TRAPI(9); ! 19 IRQ level 9
- TRAPI(10); ! 1a IRQ level 10
- TRAPI(11); ! 1b IRQ level 11
- TRAPI(12); ! 1c IRQ level 12
- TRAPI(13); ! 1d IRQ level 13
- TRAPI(14); ! 1e IRQ level 14
- TRAP(_nmi_trap); ! 1f IRQ level 15 /
- ! NMI (non maskable interrupt)
- BAD_TRAP; ! 20 r_register_access_error
- BAD_TRAP; ! 21 instruction access error
- BAD_TRAP; ! 22
- BAD_TRAP; ! 23
- BAD_TRAP; ! 24 co-processor disabled
- BAD_TRAP; ! 25 uniplemented FLUSH
- BAD_TRAP; ! 26
- BAD_TRAP; ! 27
- BAD_TRAP; ! 28 co-processor exception
- BAD_TRAP; ! 29 data access error
- BAD_TRAP; ! 2a division by zero
- BAD_TRAP; ! 2b data store error
- BAD_TRAP; ! 2c data access MMU miss
- BAD_TRAP; ! 2d
- BAD_TRAP; ! 2e
- BAD_TRAP; ! 2f
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 30-33
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 34-37
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 38-3b
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 3c-3f
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 40-43
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 44-47
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 48-4b
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 4c-4f
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 50-53
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 54-57
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 58-5b
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 5c-5f
-
- /* implementaion dependent */
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 60-63
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 64-67
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 68-6b
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 6c-6f
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 70-73
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 74-77
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 78-7b
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 7c-7f
-
- /* Software traps, not handled */
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 80-83
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 84-87
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 88-8b
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 8c-8f
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 90-93
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 94-97
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 98-9b
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 9c-9f
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a0-a3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a4-a7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a8-ab
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ac-af
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b0-b3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b4-b7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b8-bb
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! bc-bf
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c0-c3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c4-c7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c8-cb
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! cc-cf
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d0-d3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d4-d7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d8-db
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! dc-df
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e0-e3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e4-e7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e8-eb
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ec-ef
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f0-f3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f4-f7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f8-fb
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! fc-ff
-
- .section ".text"
- .align 4
-
-_hardreset:
-1000:
- flush
- nop
- nop
- nop
-
- /* Init Cache */
- set (LEON2_PREGS+LEON_REG_CACHECTRL_OFFSET), %g1
- set 0x0081000f, %g2
- st %g2, [%g1]
-
- mov %g0, %y
- clr %g1
- clr %g2
- clr %g3
- clr %g4
- clr %g5
- clr %g6
- clr %g7
-
- mov %asr17, %g3
- and %g3, 0x1f, %g3
-clear_window:
- mov %g0, %l0
- mov %g0, %l1
- mov %g0, %l2
- mov %g0, %l3
- mov %g0, %l4
- mov %g0, %l5
- mov %g0, %l6
- mov %g0, %l7
- mov %g0, %o0
- mov %g0, %o1
- mov %g0, %o2
- mov %g0, %o3
- mov %g0, %o4
- mov %g0, %o5
- mov %g0, %o6
- mov %g0, %o7
- subcc %g3, 1, %g3
- bge clear_window
- save
-
-leon2_init:
- /* LEON2 Register Base in g1 */
- set LEON2_PREGS, %g1
-
-leon2_init_cache:
- /* Set Cache control register */
- set 0x1000f, %g2
- st %g2, [%g1 + 0x14]
-
-leon2_init_clear:
-
- /* Clear LEON2 registers */
- st %g0, [%g1 + LEON2_ECTRL]
- st %g0, [%g1 + LEON2_IMASK]
- st %g0, [%g1 + LEON2_IPEND]
- st %g0, [%g1 + LEON2_IFORCE]
- st %g0, [%g1 + LEON2_ICLEAR]
- st %g0, [%g1 + LEON2_IOREG]
- st %g0, [%g1 + LEON2_IODIR]
- st %g0, [%g1 + LEON2_IOICONF]
- st %g0, [%g1 + LEON2_UCTRL0]
- st %g0, [%g1 + LEON2_UCTRL1]
-
-leon2_init_ioport:
- /* I/O port initialization */
- set 0xaa00, %g2
- st %g2, [%g1 + LEON2_IOREG]
-
-leon2_init_mctrl:
-
- /* memory config register 1 */
- set CONFIG_SYS_GRLIB_MEMCFG1, %g2
- ld [%g1], %g3 !
- and %g3, 0x300, %g3
- or %g2, %g3, %g2
- st %g2, [%g1 + LEON2_MCFG1]
- set CONFIG_SYS_GRLIB_MEMCFG2, %g2 ! Load memory config register 2
-#if !( defined(TSIM) || !defined(BZIMAGE))
- st %g2, [%g1 + LEON2_MCFG2] ! only for prom version, else done by "dumon -i"
-#endif
- set CONFIG_SYS_GRLIB_MEMCFG3, %g2 ! Init FT register
- st %g2, [%g1 + LEON2_ECTRL]
- ld [%g1 + LEON2_ECTRL], %g2
- srl %g2, 30, %g2
- andcc %g2, 3, %g6
- bne,a leon2_init_wim
- mov %g0, %asr16 ! clear err_reg
-
-leon2_init_wim:
- set WIM_INIT, %g3
- mov %g3, %wim
-
-leon2_init_psr:
- set 0x1000, %g3
- mov %psr, %g2
- wr %g2, %g3, %psr
- nop
- nop
- nop
-
-leon2_init_stackp:
- set CONFIG_SYS_INIT_SP_OFFSET, %fp
- andn %fp, 0x0f, %fp
- sub %fp, 64, %sp
-
-leon2_init_tbr:
- set CONFIG_SYS_TEXT_BASE, %g2
- wr %g0, %g2, %tbr
- nop
- nop
- nop
-
-cpu_init_unreloc:
- call cpu_init_f
- nop
-
-board_init_unreloc:
- call board_init_f
- clr %o0 ! boot_flags
-
-dead_unreloc:
- ba dead_unreloc ! infinte loop
- nop
-
-!-------------------------------------------------------------------------------
-
-/* void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM after
- * relocating the monitor code.
- *
- * %o0 = Relocated stack pointer
- * %o1 = Relocated global data pointer
- * %o2 = Relocated text pointer
- */
- .globl relocate_code
- .type relocate_code, #function
- .align 4
-relocate_code:
- SPARC_PIC_THUNK_CALL(l7)
-
-/* un relocated start address of monitor */
-#define TEXT_START _text
-
-/* un relocated end address of monitor */
-#define DATA_END __init_end
-
-reloc:
- SPARC_LOAD_ADDRESS(TEXT_START, l7, g2)
- SPARC_LOAD_ADDRESS(DATA_END, l7, g3)
- mov %o2, %g4 ! relocation address
- sub %g4, %g2, %g6 ! relocation offset
- /* copy .text & .data to relocated address */
-10: ldd [%g2], %l0
- ldd [%g2+8], %l2
- std %l0, [%g4]
- std %l2, [%g4+8]
- inc 16, %g2 ! src += 16
- cmp %g2, %g3
- bcs 10b ! while (src < end)
- inc 16, %g4 ! dst += 16
-
- clr %l0
- clr %l1
- clr %l2
- clr %l3
- clr %g2
-
-/* register g4 contain address to start
- * This means that BSS must be directly after data and code segments
- *
- * g3 is length of bss = (__bss_end-__bss_start)
- *
- */
-
- /* clear bss area (the relocated) */
-clr_bss:
- SPARC_LOAD_ADDRESS(__bss_start, l7, g2)
- SPARC_LOAD_ADDRESS(__bss_end, l7, g3)
- sub %g3,%g2,%g3 ! length of .bss area
- add %g3,%g4,%g3
- /* clearing 16byte a time ==> linker script need to align to 16 byte offset */
- clr %g1 /* std %g0 uses g0 and g1 */
-20:
- std %g0, [%g4]
- std %g0, [%g4+8]
- inc 16, %g4 ! ptr += 16
- cmp %g4, %g3
- bcs 20b ! while (ptr < end)
- nop
-
- /* add offsets to GOT table */
-fixup_got:
- SPARC_LOAD_ADDRESS(__got_start, l7, g4)
- add %g4, %g6, %g4
- SPARC_LOAD_ADDRESS(__got_end, l7, g3)
- add %g3, %g6, %g3
-30: ld [%g4], %l0 ! load old GOT-PTR
-#ifdef CONFIG_RELOC_GOT_SKIP_NULL
- cmp %l0, 0
- be 32f
-#endif
- add %l0, %g6, %l0 ! relocate GOT pointer
- st %l0, [%g4]
-32: inc 4, %g4 ! ptr += 4
- cmp %g4, %g3
- bcs 30b ! while (ptr < end)
- nop
-
-prom_relocate:
- SPARC_LOAD_ADDRESS(__prom_start, l7, g2)
- SPARC_LOAD_ADDRESS(__prom_end, l7, g3)
- /*
- * Calculated addres is stored in this variable by
- * reserve_prom() function in common/board_f.c
- */
- SPARC_LOAD_ADDRESS(__prom_start_reloc, l7, g4)
- ld [%g4], %g4
-
-40: ldd [%g2], %l0
- ldd [%g2+8], %l2
- std %l0, [%g4]
- std %l2, [%g4+8]
- inc 16, %g2
- cmp %g2, %g3
- bcs 40b
- inc 16, %g4
-
-! %o0 = stack pointer (relocated)
-! %o1 = global data pointer (relocated)
-! %o2 = text pointer (relocated)
-
-! %g6 = relocation offset
-! %l7 = _GLOBAL_OFFSET_TABLE_
-
-/* Trap table has been moved, lets tell CPU about
- * the new trap table address
- */
-update_trap_table_address:
- wr %g0, %o2, %tbr
- nop
- nop
- nop
-
-update_stack_pointers:
- mov %o0, %fp
- andn %fp, 0x0f, %fp ! align to 16 bytes
- add %fp, -64, %fp ! make space for a window push
- mov %fp, %sp ! setup stack pointer
-
-jump_board_init_r:
- mov %o1, %o0 ! relocated global data pointer
- mov %o2, %o1 ! relocated text pointer
- SPARC_LOAD_ADDRESS(board_init_r, l7, o3)
- add %o3, %g6, %o3 ! add relocation offset
- call %o3
- nop
-
-dead: ta 0 ! if call returns...
- nop
-
-!------------------------------------------------------------------------------
-
-/* Interrupt handler caller,
- * reg L7: interrupt number
- * reg L0: psr after interrupt
- * reg L1: PC
- * reg L2: next PC
- * reg L3: wim
- */
-_irq_entry:
- SAVE_ALL
-
- or %l0, PSR_PIL, %g2
- wr %g2, 0x0, %psr
- WRITE_PAUSE
- wr %g2, PSR_ET, %psr
- WRITE_PAUSE
- mov %l7, %o0 ! irq level
- set handler_irq, %o1
- set (CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o2
- add %o1, %o2, %o1
- call %o1
- add %sp, SF_REGS_SZ, %o1 ! pt_regs ptr
- or %l0, PSR_PIL, %g2 ! restore PIL after handler_irq
- wr %g2, PSR_ET, %psr ! keep ET up
- WRITE_PAUSE
-
- RESTORE_ALL
-
-!------------------------------------------------------------------------------
-
-/*
- * Window overflow trap handler.
- */
- .global _window_overflow
-
-_window_overflow:
-
- mov %wim, %l3 ! Calculate next WIM
- mov %g1, %l7
- srl %l3, 1, %g1
- sll %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l4
- or %l4, %g1, %g1
-
- save ! Get into window to be saved.
- mov %g1, %wim
- nop; nop; nop
- st %l0, [%sp + 0];
- st %l1, [%sp + 4];
- st %l2, [%sp + 8];
- st %l3, [%sp + 12];
- st %l4, [%sp + 16];
- st %l5, [%sp + 20];
- st %l6, [%sp + 24];
- st %l7, [%sp + 28];
- st %i0, [%sp + 32];
- st %i1, [%sp + 36];
- st %i2, [%sp + 40];
- st %i3, [%sp + 44];
- st %i4, [%sp + 48];
- st %i5, [%sp + 52];
- st %i6, [%sp + 56];
- st %i7, [%sp + 60];
- restore ! Go back to trap window.
- mov %l7, %g1
- jmp %l1 ! Re-execute save.
- rett %l2
-
-/*
- * Window underflow trap handler.
- */
- .global _window_underflow
-
-_window_underflow:
-
- mov %wim, %l3 ! Calculate next WIM
- sll %l3, 1, %l4
- srl %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l5
- or %l5, %l4, %l5
- mov %l5, %wim
- nop; nop; nop
- restore ! Two restores to get into the
- restore ! window to restore
- ld [%sp + 0], %l0; ! Restore window from the stack
- ld [%sp + 4], %l1;
- ld [%sp + 8], %l2;
- ld [%sp + 12], %l3;
- ld [%sp + 16], %l4;
- ld [%sp + 20], %l5;
- ld [%sp + 24], %l6;
- ld [%sp + 28], %l7;
- ld [%sp + 32], %i0;
- ld [%sp + 36], %i1;
- ld [%sp + 40], %i2;
- ld [%sp + 44], %i3;
- ld [%sp + 48], %i4;
- ld [%sp + 52], %i5;
- ld [%sp + 56], %i6;
- ld [%sp + 60], %i7;
- save ! Get back to the trap window.
- save
- jmp %l1 ! Re-execute restore.
- rett %l2
-
-!------------------------------------------------------------------------------
-
-_nmi_trap:
- nop
- jmp %l1
- rett %l2
-
-_hwerr:
- ta 0
- nop
- nop
- b _hwerr ! loop infinite
- nop
-
-/* Registers to not touch at all. */
-#define t_psr l0 /* Set by caller */
-#define t_pc l1 /* Set by caller */
-#define t_npc l2 /* Set by caller */
-#define t_wim l3 /* Set by caller */
-#define t_twinmask l4 /* Set at beginning of this entry routine. */
-#define t_kstack l5 /* Set right before pt_regs frame is built */
-#define t_retpc l6 /* If you change this, change winmacro.h header file */
-#define t_systable l7 /* Never touch this, could be the syscall table ptr. */
-#define curptr g6 /* Set after pt_regs frame is built */
-
-trap_setup:
-/* build a pt_regs trap frame. */
- sub %fp, (SF_REGS_SZ + PT_REGS_SZ), %t_kstack
- PT_STORE_ALL(t_kstack, t_psr, t_pc, t_npc, g2)
-
- /* See if we are in the trap window. */
- mov 1, %t_twinmask
- sll %t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr)
- andcc %t_twinmask, %t_wim, %g0
- beq 1f ! in trap window, clean up
- nop
-
- /*-------------------------------------------------
- * Spill , adjust %wim and go.
- */
- srl %t_wim, 0x1, %g2 ! begin computation of new %wim
-
- set (CONFIG_SYS_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1
-
- sll %t_wim, %g3, %t_wim ! NWINDOWS-1
- or %t_wim, %g2, %g2
- and %g2, 0xff, %g2
-
- save %g0, %g0, %g0 ! get in window to be saved
-
- /* Set new %wim value */
- wr %g2, 0x0, %wim
-
- /* Save the kernel window onto the corresponding stack. */
- RW_STORE(sp)
-
- restore %g0, %g0, %g0
- /*-------------------------------------------------*/
-
-1:
- /* Trap from kernel with a window available.
- * Just do it...
- */
- jmpl %t_retpc + 0x8, %g0 ! return to caller
- mov %t_kstack, %sp ! jump onto new stack
-
-#define twin_tmp1 l4
-#define glob_tmp g4
-#define curptr g6
-ret_trap_entry:
- wr %t_psr, 0x0, %psr ! enable nesting again, clear ET
-
- /* Will the rett land us in the invalid window? */
- mov 2, %g1
- sll %g1, %t_psr, %g1
-
- set CONFIG_SYS_SPARC_NWINDOWS, %g2 !NWINDOWS
-
- srl %g1, %g2, %g2
- or %g1, %g2, %g1
- rd %wim, %g2
- andcc %g2, %g1, %g0
- be 1f ! Nope, just return from the trap
- sll %g2, 0x1, %g1
-
- /* We have to grab a window before returning. */
- set (CONFIG_SYS_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1
-
- srl %g2, %g3, %g2
- or %g1, %g2, %g1
- and %g1, 0xff, %g1
-
- wr %g1, 0x0, %wim
-
- /* Grrr, make sure we load from the right %sp... */
- PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
-
- restore %g0, %g0, %g0
- RW_LOAD(sp)
- b 2f
- save %g0, %g0, %g0
-
- /* Reload the entire frame in case this is from a
- * kernel system call or whatever...
- */
-1:
- PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
-2:
- wr %t_psr, 0x0, %psr
- nop;
- nop;
- nop
-
- jmp %t_pc
- rett %t_npc
-
-/* This is called from relocated C-code.
- * It resets the system by jumping to _start
- */
-_reset_reloc:
- set start, %l0
- call %l0
- nop
+++ /dev/null
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-extra-y = start.o
-obj-y = cpu_init.o serial.o cpu.o ambapp.o ambapp_low.o ambapp_low_c.o \
- interrupts.o prom.o usb_uhci.o memcfg.o memcfg_low.o
+++ /dev/null
-/* GRLIB AMBA Plug&Play information scanning, relies on assembler
- * routines.
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <malloc.h>
-#include <ambapp.h>
-#include <config.h>
-
-/************ C INTERFACE OF ASSEMBLER SCAN ROUTINES ************/
-struct ambapp_find_apb_info {
- /* Address of APB device Plug&Play information */
- struct ambapp_pnp_apb *pnp;
- /* AHB Bus index of where the APB-Master Bridge device was found */
- int ahb_bus_index;
- int dec_index;
-};
-
-struct ambapp_find_ahb_info {
- /* Address of AHB device Plug&Play information */
- struct ambapp_pnp_ahb *pnp;
- /* AHB Bus index of where the AHB device was found */
- int ahb_bus_index;
- int dec_index;
-};
-
-extern void ambapp_find_buses(unsigned int ioarea, struct ambapp_bus *abus);
-
-extern int ambapp_find_apb(struct ambapp_bus *abus, unsigned int dev_vend,
- int index, struct ambapp_find_apb_info *result);
-
-extern int ambapp_find_ahb(struct ambapp_bus *abus, unsigned int dev_vend,
- int index, int type, struct ambapp_find_ahb_info *result);
-
-/************ C ROUTINES USED BY U-BOOT AMBA CORE DRIVERS ************/
-struct ambapp_bus ambapp_plb __section(.data);
-
-void ambapp_bus_init(
- unsigned int ioarea,
- unsigned int freq,
- struct ambapp_bus *abus)
-{
- int i;
-
- ambapp_find_buses(ioarea, abus);
- for (i = 0; i < 6; i++)
- if (abus->ioareas[i] == 0)
- break;
- abus->buses = i;
- abus->freq = freq;
-}
-
-/* Parse APB PnP Information */
-void ambapp_apb_parse(struct ambapp_find_apb_info *info, ambapp_apbdev *dev)
-{
- struct ambapp_pnp_apb *apb = info->pnp;
- unsigned int apbbase = (unsigned int)apb & 0xfff00000;
-
- dev->vendor = amba_vendor(apb->id);
- dev->device = amba_device(apb->id);
- dev->irq = amba_irq(apb->id);
- dev->ver = amba_ver(apb->id);
- dev->address = (apbbase | (((apb->iobar & 0xfff00000) >> 12))) &
- (((apb->iobar & 0x0000fff0) << 4) | 0xfff00000);
- dev->mask = amba_apb_mask(apb->iobar);
- dev->ahb_bus_index = info->ahb_bus_index - 1;
-}
-
-/* Parse AHB PnP information */
-void ambapp_ahb_parse(struct ambapp_find_ahb_info *info, ambapp_ahbdev *dev)
-{
- struct ambapp_pnp_ahb *ahb = info->pnp;
- unsigned int ahbbase = (unsigned int)ahb & 0xfff00000;
- int i, type;
- unsigned int addr, mask, mbar;
-
- dev->vendor = amba_vendor(ahb->id);
- dev->device = amba_device(ahb->id);
- dev->irq = amba_irq(ahb->id);
- dev->ver = amba_ver(ahb->id);
- dev->userdef[0] = ahb->custom[0];
- dev->userdef[1] = ahb->custom[1];
- dev->userdef[2] = ahb->custom[2];
- dev->ahb_bus_index = info->ahb_bus_index - 1;
- for (i = 0; i < 4; i++) {
- mbar = ahb->mbar[i];
- addr = amba_membar_start(mbar);
- type = amba_membar_type(mbar);
- if (type == AMBA_TYPE_AHBIO) {
- addr = amba_ahbio_adr(addr, ahbbase);
- mask = (((unsigned int)
- (amba_membar_mask((~mbar))<<8)|0xff))+1;
- } else {
- /* AHB memory area, absolute address */
- mask = (~((unsigned int)
- (amba_membar_mask(mbar)<<20)))+1;
- }
- dev->address[i] = addr;
- dev->mask[i] = mask;
- dev->type[i] = type;
- }
-}
-
-int ambapp_apb_find(struct ambapp_bus *abus, int vendor, int device,
- int index, ambapp_apbdev *dev)
-{
- unsigned int devid = AMBA_PNP_ID(vendor, device);
- int found;
- struct ambapp_find_apb_info apbdev;
-
- found = ambapp_find_apb(abus, devid, index, &apbdev);
- if (found == 1)
- ambapp_apb_parse(&apbdev, dev);
-
- return found;
-}
-
-int ambapp_apb_count(struct ambapp_bus *abus, int vendor, int device)
-{
- unsigned int devid = AMBA_PNP_ID(vendor, device);
- int found;
- struct ambapp_find_apb_info apbdev;
-
- found = ambapp_find_apb(abus, devid, 63, &apbdev);
- if (found == 1)
- return 64;
- else
- return 63 - apbdev.dec_index;
-}
-
-int ambapp_ahb_find(struct ambapp_bus *abus, int vendor, int device,
- int index, ambapp_ahbdev *dev, int type)
-{
- int found;
- struct ambapp_find_ahb_info ahbdev;
- unsigned int devid = AMBA_PNP_ID(vendor, device);
-
- found = ambapp_find_ahb(abus, devid, index, type, &ahbdev);
- if (found == 1)
- ambapp_ahb_parse(&ahbdev, dev);
-
- return found;
-}
-
-int ambapp_ahbmst_find(struct ambapp_bus *abus, int vendor, int device,
- int index, ambapp_ahbdev *dev)
-{
- return ambapp_ahb_find(abus, vendor, device, index, dev, DEV_AHB_MST);
-}
-
-int ambapp_ahbslv_find(struct ambapp_bus *abus, int vendor, int device,
- int index, ambapp_ahbdev *dev)
-{
- return ambapp_ahb_find(abus, vendor, device, index, dev, DEV_AHB_SLV);
-}
-
-int ambapp_ahb_count(struct ambapp_bus *abus, int vendor, int device, int type)
-{
- int found;
- struct ambapp_find_ahb_info ahbdev;
- unsigned int devid = AMBA_PNP_ID(vendor, device);
-
- found = ambapp_find_ahb(abus, devid, 63, type, &ahbdev);
- if (found == 1)
- return 64;
- else
- return 63 - ahbdev.dec_index;
-}
-
-int ambapp_ahbmst_count(struct ambapp_bus *abus, int vendor, int device)
-{
- return ambapp_ahb_count(abus, vendor, device, DEV_AHB_MST);
-}
-
-int ambapp_ahbslv_count(struct ambapp_bus *abus, int vendor, int device)
-{
- return ambapp_ahb_count(abus, vendor, device, DEV_AHB_SLV);
-}
-
-/* The define CONFIG_SYS_GRLIB_SINGLE_BUS may be defined on GRLIB systems
- * where only one AHB Bus is available - no bridges are present. This option
- * is available only to reduce the footprint.
- *
- * Defining this on a multi-bus GRLIB system may also work depending on the
- * design.
- */
-
-#ifndef CONFIG_SYS_GRLIB_SINGLE_BUS
-
-/* GAISLER AHB2AHB Version 1 Bridge Definitions */
-#define AHB2AHB_V1_FLAG_FFACT 0x0f0 /* Frequency factor against top bus */
-#define AHB2AHB_V1_FLAG_FFACT_DIR 0x100 /* Factor direction, 0=down, 1=up */
-#define AHB2AHB_V1_FLAG_MBUS 0x00c /* Master bus number mask */
-#define AHB2AHB_V1_FLAG_SBUS 0x003 /* Slave bus number mask */
-
-/* Get Parent bus frequency. Note that since we go from a "child" bus
- * to a parent bus, the frequency factor direction is inverted.
- */
-unsigned int gaisler_ahb2ahb_v1_freq(ambapp_ahbdev *ahb, unsigned int freq)
-{
- int dir;
- unsigned char ffact;
-
- /* Get division/multiple factor */
- ffact = (ahb->userdef[0] & AHB2AHB_V1_FLAG_FFACT) >> 4;
- if (ffact != 0) {
- dir = ahb->userdef[0] & AHB2AHB_V1_FLAG_FFACT_DIR;
-
- /* Calculate frequency by dividing or
- * multiplying system frequency
- */
- if (dir)
- freq = freq * ffact;
- else
- freq = freq / ffact;
- }
-
- return freq;
-}
-
-/* AHB2AHB and L2CACHE ver 2 is not supported yet. */
-unsigned int gaisler_ahb2ahb_v2_freq(ambapp_ahbdev *ahb, unsigned int freq)
-{
- panic("gaisler_ahb2ahb_v2_freq: AHB2AHB ver 2 not supported\n");
- return -1;
-}
-#endif
-
-/* Return the frequency of a AHB bus identified by index found
- * note that this is not the AHB Bus number.
- */
-unsigned int ambapp_bus_freq(struct ambapp_bus *abus, int ahb_bus_index)
-{
- unsigned int freq = abus->freq;
-#ifndef CONFIG_SYS_GRLIB_SINGLE_BUS
- unsigned int ioarea, ioarea_parent, bridge_pnp_ofs;
- struct ambapp_find_ahb_info ahbinfo;
- ambapp_ahbdev ahb;
- int parent;
-
- debug("ambapp_bus_freq: get freq on bus %d\n", ahb_bus_index);
-
- while (ahb_bus_index != 0) {
- debug(" BUS[0]: 0x%08x\n", abus->ioareas[0]);
- debug(" BUS[1]: 0x%08x\n", abus->ioareas[1]);
- debug(" BUS[2]: 0x%08x\n", abus->ioareas[2]);
- debug(" BUS[3]: 0x%08x\n", abus->ioareas[3]);
- debug(" BUS[4]: 0x%08x\n", abus->ioareas[4]);
- debug(" BUS[5]: 0x%08x\n", abus->ioareas[5]);
-
- /* Get I/O area of AHB bus */
- ioarea = abus->ioareas[ahb_bus_index];
-
- debug(" IOAREA: 0x%08x\n", ioarea);
-
- /* Get parent bus */
- parent = (ioarea & 0x7);
- if (parent == 0) {
- panic("%s: parent=0 indicates no parent! Stopping.\n",
- __func__);
- return -1;
- }
- parent = parent - 1;
- bridge_pnp_ofs = ioarea & 0x7e0;
-
- debug(" PARENT: %d\n", parent);
- debug(" BRIDGE_OFS: 0x%08x\n", bridge_pnp_ofs);
-
- /* Get AHB/AHB bridge PnP address */
- ioarea_parent = (abus->ioareas[parent] & 0xfff00000) |
- AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA;
- ahbinfo.pnp = (struct ambapp_pnp_ahb *)
- (ioarea_parent | bridge_pnp_ofs);
-
- debug(" IOAREA PARENT: 0x%08x\n", ioarea_parent);
- debug(" BRIDGE PNP: 0x%p\n", ahbinfo.pnp);
-
- /* Parse the AHB information */
- ahbinfo.ahb_bus_index = parent;
- ambapp_ahb_parse(&ahbinfo, &ahb);
-
- debug(" BRIDGE ID: VENDOR=%d(0x%x), DEVICE=%d(0x%x)\n",
- ahb.vendor, ahb.vendor, ahb.device, ahb.device);
-
- /* Different bridges may convert frequency differently */
- if ((ahb.vendor == VENDOR_GAISLER) &&
- ((ahb.device == GAISLER_AHB2AHB) ||
- (ahb.device == GAISLER_L2CACHE))) {
- /* Get new frequency */
- if (ahb.ver > 1)
- freq = gaisler_ahb2ahb_v2_freq(&ahb, freq);
- else
- freq = gaisler_ahb2ahb_v1_freq(&ahb, freq);
-
- debug(" NEW FREQ: %dHz\n", freq);
- } else {
- panic("%s: unsupported AMBA bridge\n", __func__);
- return -1;
- }
-
- /* Step upwards towards system top bus */
- ahb_bus_index = parent;
- }
-#endif
-
- debug("ambapp_bus_freq: %dHz\n", freq);
-
- return freq;
-}
+++ /dev/null
-/* GRLIB AMBA Plug&Play information scanning implemented without
- * using memory (stack) and one register window. The code scan
- * the PnP info and inserts the AHB bridges/buses into register
- * i0-i5.
- * The code support
- * - up to 6 AHB buses
- * - multiple APB buses
- * - support for AHB2AHB & L2CACHE bridges
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <ambapp.h>
-
- .seg "text"
- .globl _nomem_amba_init
- .globl _nomem_ambapp_find_buses
- .globl _nomem_find_apb
- .globl _nomem_find_ahb
-
-/* Overview
- * ========
- *
- * _nomem_amba_init - Init AMBA bus and calls _nomem_ambapp_find_buses
- * _nomem_ambapp_find_buses - Scan AMBA PnP info for AHB buses/bridges and
- * place them in i0-i5, see below
- * _nomem_find_apb - Find one APB device identified by VENDOR:DEVICE
- * ID and an index.
- * _nomem_find_ahb - Find one AHB Master or Slave device identified
- * by VENDOR:DEVICE ID and an index.
- * init_ahb_bridges - Local function. Clears i0-i5
- * insert_ahb_bridge - Local function. Insert a new AHB bus into first
- * free register in i0-i5. It also checks that the
- * bus has not already been added.
- * get_ahb_bridge - Local function. Get AHB bus from registers,
- * return register iN, where N is defined by o0.
- *
- * The _nomem_find_apb and _nomem_find_ahb function requires that i0-i5
- * are populated with the AHB buses of the system. The registers are
- * initialized by _nomem_ambapp_find_buses.
- *
- * AHB Bus result and requirements of i0-i5
- * ========================================
- *
- * i0: AHB BUS0 IOAREA, no parent bus
- * i1: AHB BUS1 IOAREA, parent bus is always i0 (AHB BUS0) and bridge address
- * i2: AHB BUS2 IOAREA, 3-bit parent bus number and bridge address
- * i3: AHB BUS3 IOAREA, 3-bit parent bus number and bridge address
- * i4: AHB BUS4 IOAREA, 3-bit parent bus number and bridge address
- * i5: AHB BUS5 IOAREA, 3-bit parent bus number and bridge address
- *
- * AHB BUS
- * -------
- * Bits 31-20 (0xfff00000) contain the found bus I/O Area (AHB PnP area).
- *
- * 3-bit Parent bus
- * ----------------
- * Bits 2-0 (0x00000007) contain parent bus number. Zero if no parent
- * bus, 1 = parent is AHB BUS 0 (i0), 2 = parent is AHB BUS 1 (i1)..
- *
- * Bridge Address
- * --------------
- * Bits 10-5 (0x000007e0) contain the index of the Bridge's PnP
- * information on the parent. Since all bridges are found in the
- * PnP information they all have a PnP entry. Together with the
- * parent bus number the PnP entry can be found:
- * PnPEntry = (BRIDGE_ADDRESS + (iN & 0xfff00000)) | 0x000ff800
- * where N is the parent bus minus one.
- *
- */
-
-/* Function initializes the AHB Bridge I/O AREA storage. (Clears i0-i5)
- *
- * Arguments
- * none
- *
- * Results
- * none
- *
- * Clobbered
- * none
- */
-
-init_ahb_bridges:
- mov %g0, %i0
- mov %g0, %i1
- mov %g0, %i2
- mov %g0, %i3
- mov %g0, %i4
- retl
- mov %g0, %i5
-
-/* Function returns AHB Bridge I/O AREA for specified bus.
- *
- * Arguments
- * - o0 = bus number
- *
- * Results
- * - o0 = I/O AREA
- *
- * Clobbered
- * none
- */
-get_ahb_bridge:
- cmp %o0, 1
- be,a L1
- mov %i0, %o0
-
- cmp %o0, 2
- be,a L1
- mov %i1, %o0
-
- cmp %o0, 3
- be,a L1
- mov %i2, %o0
-
- cmp %o0, 4
- be,a L1
- mov %i3, %o0
-
- cmp %o0, 5
- be,a L1
- mov %i4, %o0
-
- cmp %o0, 6
- be,a L1
- mov %i5, %o0
-
- /* o0 > 6: only 6 buses supported */
- mov %g0, %o0
-L1:
- retl
- nop
-
-/* Function adds a AHB Bridge I/O AREA to the i0-i5 registers if
- * not already added. It stores the bus PnP start information.
- *
- * Arguments
- * - o0 = AHB Bridge I/O area
- *
- * Results
- * none
- *
- * Clobbered
- * o2, o3
- */
-insert_ahb_bridge:
- /* Check that bridge hasn't already been added */
- andn %o0, 0x7ff, %o2
- andn %i0, 0x7ff, %o3
- cmp %o3, %o2
- be L2
- andn %i1, 0x7ff, %o3
- cmp %o3, %o2
- be L2
- andn %i2, 0x7ff, %o3
- cmp %o3, %o2
- be L2
- andn %i3, 0x7ff, %o3
- cmp %o3, %o2
- be L2
- andn %i4, 0x7ff, %o3
- cmp %o3, %o2
- be L2
- andn %i5, 0x7ff, %o3
- cmp %o3, %o2
- be L2
-
- /* Insert into first free posistion */
- cmp %i0, %g0
- be,a L2
- mov %o0, %i0
-
- cmp %i1, %g0
- be,a L2
- mov %o0, %i1
-
- cmp %i2, %g0
- be,a L2
- mov %o0, %i2
-
- cmp %i3, %g0
- be,a L2
- mov %o0, %i3
-
- cmp %i4, %g0
- be,a L2
- mov %o0, %i4
-
- cmp %i5, %g0
- be,a L2
- mov %o0, %i5
-L2:
- retl
- nop
-
-/* FUNCTION int _nomem_find_ahb_bus(
- * unsigned int bridge,
- * int vendor_device,
- * int index,
- * void **pconf,
- * int not_used,
- * int option
- * )
- *
- * Scans the AHB Master or Slave area for a matching VENDOR:DEVICE, the
- * index is decremented when a matching device is found but index is
- * greater than zero. When index is zero and a matching DEVICE:VENDOR
- * is found the AHB configuration address and AHB I/O area is returned.
- *
- * i0-i7,l0,l1,l2,l3,l4,g2,o6 is not available for use.
- * o1,o5 Must be left untouched
- *
- * Results
- * - o0 Number of found devices (1 or 0)
- * - o2 is decremented for each matching VENDOR:DEVICE found, zero if found
- * - o3 Address of the AHB PnP configuration entry (Only valid if o0=1)
- *
- * Clobbered
- * - o3 (Clobbered when no device was found)
- * - o4 (Number of Devices left to search)
- * - o0 (Bus ID, PnP ID, Device)
- */
-_nomem_find_ahb_bus:
-
- /* Get the number of Slaves/Masters.
- * Only AHB Bus 0 has 64 AHB Masters/Slaves the
- * other AHB buses has 16 slaves and 16 masters.
- */
- add %g0, 16, %o4 /* Defaulting to 16 */
- andcc %o0, 0x7, %g0 /* 3-bit bus id */
- be,a .L_maxloops_detected
- add %g0, 64, %o4 /* AHB Bus 0 has 64 AHB Masters/Slaves */
-.L_maxloops_detected:
-
- /* Get start address of AHB Slave or AHB Master area depending on what
- * we are searching for.
- */
- andn %o0, 0x7ff, %o0 /* Remove Bus ID and 5-bit AHB/AHB
- * Bridge PnP Address to get I/O Area */
- set AMBA_CONF_AREA, %o3
- or %o3, %o0, %o3 /* Master area address */
-
- cmp %o5, DEV_AHB_SLV
- be,a .L_conf_area_calculated
- or %o3, AMBA_AHB_SLAVE_CONF_AREA, %o3 /* Add 0x800 to get to slave area */
-.L_conf_area_calculated:
-
- /* Iterate over all AHB device and try to find matching DEVICE:VENDOR
- * o1 - VENDOR|DEVICE
- * o2 - Index
- * o3 - Current AHB Device Configuration address
- * o5 - Type (leave untouched)
- *
- * o4 - Number of AHB device left to process
- * o0 - tmp
- */
-.L_process_one_conf:
- ld [%o3], %o0
- andn %o0, 0xfff, %o0
- cmp %o0, 0 /* No device if zero */
- beq .L_next_conf
- cmp %o1, 0 /* If VENDOR:DEVICE==0, consider all matching */
- beq .L_process_ahb_dev_found
- cmp %o0, %o1 /* Does VENDOR and DEVICE Match? */
- bne .L_next_conf
- nop
-.L_process_ahb_dev_found:
- /* Found a Matching VENDOR:DEVICE, index must also match */
- cmp %o2, %g0
- bne .L_next_conf
- dec %o2
- /* Index matches also, return happy with o3 set to AHB Conf Address */
- mov %g0, %o2
- retl
- add %g0, 1, %o0
-
-.L_next_conf:
- subcc %o4, 1, %o4 /* One device has been processed,
- * Are there more devices to process? */
- bne .L_process_one_conf
- add %o3, AMBA_AHB_CONF_LENGH, %o3 /* Next Configuration entry */
- /* No Matching device found */
- retl
- mov %g0, %o0
-
-/* FUNCTION int _nomem_find_ahb(
- * int unused,
- * int vendor_device,
- * int index,
- * void **pconf,
- * int *ahb_bus_index,
- * int option,
- * )
- *
- * Find a AHB Master or AHB Slave device, it puts the address of the AHB PnP
- * configuration in o3 (pconf), the I/O Area base address in o4 (pioarea).
- *
- * Calls _nomem_find_ahb_bus for every AHB bus.
- *
- * i0-i7, l0, l1, o6, g1, g4-g7 is not available for use.
- *
- * Arguments
- * - o0 Unused
- *
- * Results
- * - o0 Number of found devices (1 or 0)
- * - o2 Decremented Index (Zero if found)
- * - o3 Address of the AHB PnP configuration entry
- * - o4 AHB Bus index the device was found on (if o0=1)
- * - o5 Left untouched
- *
- * Clobbered
- * - o0 (AHB Bridge and used by _nomem_find_ahb_bus)
- * - o2 (index is decremented)
- * - l2 (Current AHB Bus index)
- * - g2 (return address)
- */
-_nomem_find_ahb:
- mov %o7, %g2 /* Save return address */
- /* Scan all AHB Buses found for the AHB Master/Slave matching VENDOR:DEVICE */
- clr %l2
-.L_search_next_ahb_bus:
- add %l2, 1, %l2
- call get_ahb_bridge /* Get bus %l0 I/O Area */
- mov %l2, %o0
- cmp %o0, %g0
- be .L_no_device_found /* If no more AHB bus is left to be scanned, proceed */
- nop
- call _nomem_find_ahb_bus /* Scan AHB bus %o0 for VENDOR:DEVICE. Index in o3 is decremented */
- nop
- cmp %o0, %g0 /* If VENDOR:DEVICE was not found scan next AHB Bus */
- be .L_search_next_ahb_bus /* Do next bus is o0=0 (not found) */
- nop
- /* The device was found, o0 is 1 */
- mov %g2, %o7 /* Restore return address */
- retl
- mov %l2, %o4 /* The AHB bus index the device was found on */
-
- /* No device found matching */
-.L_no_device_found:
- mov %g2, %o7 /* Restore return address */
- retl
- mov %g0, %o0
-
-
-/* FUNCTION int _nomem_find_apb_bus(
- * int apbmst,
- * int vendor_device,
- * int index,
- * void **pconf
- * )
- *
- * Find a APB Slave device, it puts the address of the APB PnP configuration
- * in o3 (pconf).
- *
- * Calls _nomem_find_ahb_bus for every AHB bus searching for AHB/APB Bridges.
- * The AHB/APB bridges are AHB Slaves with ID GAISLER_APBMST.
- *
- * Results
- * - o0 Number of found devices (1 or 0)
- * - o2 Decremented Index
- * - o3 Address of the found APB device PnP configuration entry
- *
- * Clobbered
- * - o5 PnP VENDOR:DEVICE ID
- */
-
-_nomem_find_apb_bus:
- set AMBA_CONF_AREA, %o3
- or %o0, %o3, %o3 /* Calc start of APB device PnP info */
- add %g0, 16, %o0 /* o0, number of APB Slaves left to scan */
-.L_process_one_apb_conf:
- ld [%o3], %o5
- andn %o5, 0xfff, %o5
- cmp %o5, 0 /* No device if zero */
- beq .L_process_apb_dev_not_found
- cmp %o1, 0 /* If VENDOR:DEVICE == -1, consider all matching */
- beq .L_process_apb_dev_found
- cmp %o1, %o5 /* Found VENDOR:DEVICE */
- bne .L_process_apb_dev_not_found
- nop
-
-.L_process_apb_dev_found:
- /* Found matching device, compare index */
- cmp %o2, %g0
- bne .L_process_apb_dev_not_found
- dec %o2
- /* Matching index and VENDOR:DEVICE */
- retl
- add %g0, 1, %o0
-
-.L_process_apb_dev_not_found:
- subcc %o0, 1, %o0
- bne .L_process_one_apb_conf
- add %o3, 8, %o3
- retl
- mov %g0, %o0
-
-/* FUNCTION int _nomem_find_apb(
- * int unused,
- * int vendor_device,
- * int index,
- * void **pconf,
- * int *ahb_bus_index
- * )
- *
- * Find a APB Slave device, it puts the address of the APB PnP configuration
- * in o3 (pconf), the APB Master I/O Area base address in o4 (papbarea).
- *
- * Calls _nomem_find_ahb_bus for every AHB bus searching for AHB/APB Bridges.
- * The AHB/APB bridges are AHB Slaves with ID GAISLER_APBMST.
- *
- * i0-i7, l0, l1, o6 is not available for use.
- *
- * Arguments
- * - o0 Unused
- *
- * Results
- * - o0 Number of found devices (1 or 0)
- * - o2 Decremented Index if not found
- * - o3 Address of the APB PnP configuration entry
- * - o4 AHB Bus index of APB Bridge/APB Device
- *
- * Clobbered
- * - o0 (AHB Bridge)
- * - o2 (index is decremented)
- * - l2 (APB DEV Index [7..4] : APBMST AHB Index [3..0])
- * - l3 (Current AHB Bus index)
- * - l4 (temporary storage for APB VENDOR:DEVICE)
- * - o5 (AHB Slave ID)
- * - o0 (clobbered by _nomem_find_ahb_bus)
- * - g2 (Return address)
- */
-_nomem_find_apb:
- /* Scan all AHB Buses found for AHB/APB Bridges */
- mov %o7, %g2 /* Save return address */
- mov %o1, %l4 /* Save APB VENDOR:DEVICE */
- sll %o2, 4, %l2 /* APB MST index = 0 */
- add %g0, 1, %l3 /* AHB Bus index = 0 */
-.L2_search_next_ahb_bus:
- call get_ahb_bridge /* Get bus %l3 I/O Area */
- mov %l3, %o0
- cmp %o0, %g0
- be .L2_no_device_found /* If no more AHB bus is left to be scanned, proceed */
- add %g0, DEV_AHB_SLV, %o5 /* Search for AHB Slave */
- sethi %hi(AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_APBMST)), %o1
- call _nomem_find_ahb_bus /* Scan AHB bus %o0 for VENDOR:DEVICE. Index in o3 is decremented */
- and %l2, 0xf, %o2 /* Set APBMST index */
- cmp %o0, %g0 /* If no AHB/APB Bridge was not found, scan next AHB Bus */
- be .L_no_apb_bridge_found /* Do next bus */
- nop
-
- /* The AHB/APB Bridge was found.
- * Search for the requested APB Device on the APB bus using
- * find_apb_bus, it will decrement the index.
- */
- ld [%o3 + AMBA_AHB_MBAR0_OFS], %o3
- sll %o3, 16, %o0
- and %o0, %o3, %o0 /* Address AND Address Mask */
- sethi %hi(0xfff00000), %o3
- and %o0, %o3, %o0 /* AHB/APB Bridge address */
-
- srl %l2, 4, %o2 /* APB DEV Index */
- call _nomem_find_apb_bus
- mov %l4, %o1 /* APB VENDOR:DEVICE */
- cmp %o0, %g0
- be .L_apb_dev_not_found
- mov %g2, %o7 /* Restore return address */
- /* APB Device found
- * o0 1
- * o2 Index is decremented to zero
- * o3 APB configuration address,
- * o4 APB Bridge Configuration address.
- */
- mov %g0, %o2
- retl
- mov %l3, %o4
-
-.L_apb_dev_not_found:
- /* Update APB DEV Index by saving output from find_apb_bus
- * (index parameter) into bits [31..4] in L2.
- */
- sll %o2, 4, %o2
- and %l2, 0xf, %l2
- or %o2, %l2, %l2
- /* Try finding the next AHB/APB Bridge on the same AHB bus
- * to find more APB devices
- */
- ba .L2_search_next_ahb_bus /* Find next AHB/APB bridge */
- inc %l2
-
-.L_no_apb_bridge_found:
- inc %l3 /* Next AHB Bus */
- ba .L2_search_next_ahb_bus /* Process next AHB bus */
- andn %l2, 0xf, %l2 /* Start at APB Bridge index 0 at every AHB Bus */
- /* No device found matching */
-.L2_no_device_found:
- mov %g2, %o7 /* Restore return address */
- srl %l2, 4, %o2 /* APB DEV Index */
- retl
- mov %g0, %o0
-
-
-
-/* FUNCTION _nomem_amba_scan_gaisler_ahb2ahb_bridge(unsigned int bridge, int bus)
- *
- * Constraints:
- * - o1 may not be used
- * - o0, o2, o3 may be used.
- *
- * Arguments
- * - o0 PnP Address of Bridge AHB device
- * - o2 PnP ID of AHB device
- *
- * Results
- * - o0 Address of new bus PnP area or a 1 if AHB device is no bridge
- *
- * Clobbered
- * - o0, o2
- *
- */
-_nomem_amba_scan_gaisler_ahb2ahb_bridge:
- andn %o2, 0xfff, %o2
- sethi %hi(AMBA_PNP_ID(VENDOR_GAISLER,GAISLER_AHB2AHB)), %o3
- cmp %o2, %o3
- beq .L_is_ahb2ahb_bridge
- nop
-
- retl
- add %g0, 1, %o0
-
-.L_is_ahb2ahb_bridge:
- /* Found a GAISLER AHB2AHB bridge */
- retl
- ld [%o0 + AMBA_AHB_CUSTOM1_OFS], %o0 /* Get address of bridge PnP area */
-
-
-/* FUNCTION _nomem_amba_scan_gaisler_l2cache_bridge(unsigned int bridge, int bus)
- *
- * Constraints:
- * - o1 may not be used
- * - o0, o2, o3 may be used.
- *
- * Arguments
- * - o0 PnP Address of Bridge AHB device
- * - o2 PnP ID of AHB device
- *
- * Results
- * - o0 Address of new bus PnP area or a 1 if AHB device is no bridge
- *
- * Clobbered
- * - o0, o2
- *
- */
-_nomem_amba_scan_gaisler_l2cache_bridge:
- andn %o2, 0xfff, %o2
- sethi %hi(AMBA_PNP_ID(VENDOR_GAISLER,GAISLER_L2CACHE)), %o3
- cmp %o2, %o3
- beq .L_is_l2cache_bridge
- nop
-
- retl
- add %g0, 1, %o0
-
-.L_is_l2cache_bridge:
- /* Found a GAISLER l2cache bridge */
- retl
- ld [%o0 + AMBA_AHB_CUSTOM1_OFS], %o0 /* Get address of bridge PnP area */
-
-
-/* FUNCTION _nomem_amba_scan(unsigned int bridge, int bus)
- *
- * Constraints:
- * i0-i7, l0 is used by caller
- * o5-o7 may not be used.
- *
- * Arguments
- * - o0 Bridge Information: I/O AREA and parent bus
- * - o1 Bus
- *
- * Results
- * - o0 Number of AHB bridges found
- *
- * Clobbered
- * - o0 (Current AHB slave conf address)
- * - o2 (Used by insert_bridge)
- * - o3 (Used by insert_bridge)
- * - l1 (Number of AHB Slaves left to process)
- * - l2 (Current AHB slave conf address)
- * - g2 (Return address)
- */
-_nomem_amba_scan:
- mov %o7, %g2 /* Save return address */
- set 16, %l1
- cmp %o1, 1
- be,a .L2_maxloops_detected
- add %g0, 64, %l1
-.L2_maxloops_detected:
-
- /* Clear 3-bit parent bus from bridge to get I/O AREA, then or
- * (AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA) to get first AHB slave
- * conf address.
- */
- andn %o0, 0x7ff, %o0
- set (AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA), %l2
- or %o0, %l2, %l2
-
- /* Scan AHB Slave area for AHB<->AHB bridges. For each AHB device
- * all "bridge drivers" are called, the driver function interface:
- *
- * Input:
- * - o0 PnP Address of Bridge AHB device
- * - o2 PnP ID of AHB device
- * Return values:
- * - o0 Address of new bus PnP area, returning a 1 in o2 means not found
- *
- * Constraints:
- * - o1 may not be used
- * - o0, o2, o3 may be used.
- *
- */
-.L_scan_one_ahb_slave:
- ld [%l2], %o2
-
- cmp %o2, %g0
- beq .L_scan_next_ahb_slave
- nop
-
- /* Call the GAISLER AHB2AHB bridge driver */
- call _nomem_amba_scan_gaisler_ahb2ahb_bridge
- mov %l2, %o0
- cmp %o0, 1
- bne .L_found_bridge
- ld [%l2], %o2
-
- /* Call the GAISLER L2CACHE bridge driver */
- call _nomem_amba_scan_gaisler_l2cache_bridge
- mov %l2, %o0
- cmp %o0, 1
- bne .L_found_bridge
- ld [%l2], %o2
-
- /* Insert next bridge "driver" function here */
-
-
- /* The PnP ID did not match a bridge - a new bus was not found ==>
- * step to next AHB device */
- ba .L_scan_next_ahb_slave
- nop
-
- /* Add Found bus */
-.L_found_bridge:
- and %l2, 0x7e0, %o2
- or %o2, %o0, %o0 /* Add AHB/AHB Bridge PnP address */
- call insert_ahb_bridge /* Insert Bridge into found buses storage */
- or %o1, %o0, %o0 /* Add parent bus LSB 3-bits */
-
-.L_scan_next_ahb_slave:
- /* More Slaves to process? */
- subcc %l1, 1, %l1
- bne .L_scan_one_ahb_slave
- add %l2, AMBA_AHB_CONF_LENGH, %l2
-
- /* No more AHB devices to process */
- mov %g2, %o7 /* Restore return address */
- retl
- nop
-
-/* FUNCTION _nomem_ambapp_find_buses(unsigned int ioarea)
- *
- * Find AMBA AHB buses.
- *
- * Constraints:
- * i6-i7, l7 is used by caller
- *
- * Arguments
- * - o0 Bridge Information: I/O AREA and parent bus
- *
- * Results
- * - o0 Number of AHB bridges found
- * - i0-i5 initialized
- *
- * Clobbered
- * - o0 (Current AHB slave conf address)
- * - o2 (Used by insert_bridge)
- * - o3 (Used by insert_bridge)
- * - l0 (Current AHB Bus)
- * - l1 (Used by nomem_amba_scan)
- * - l2 (Used by nomem_amba_scan)
- * - l3 (Used by nomem_amba_scan)
- * - l4 (Used by nomem_amba_scan)
- *
- * - g1 (level 1 return address)
- * - g2 (Used by nomem_amba_scan)
- */
-_nomem_ambapp_find_buses:
- mov %o7, %g1 /* Save return address */
-
- /* Initialize AHB Bus storage */
- call init_ahb_bridges
- nop
-
- /* Insert AHB Bus 0 */
- call insert_ahb_bridge
- nop /* Argument already prepared by caller */
-
- /* Scan AHB Bus 0 for AHB Bridges */
- call _nomem_amba_scan
- add %g0, 1, %o1
-
- /* Scan all AHB Buses found for more AHB Bridges */
- add %g0, 2, %l0
-.L100_search_next_ahb_bus:
- call get_ahb_bridge /* Get bus %l0 I/O Area */
- mov %l0, %o0
- cmp %o0, %g0
- be .L100_return /* If no more AHB bus is left to be scanned, proceed */
- nop
- call _nomem_amba_scan /* Scan bus %l0 for AHB Bridges. i0-i7,l0 is used */
- mov %l0, %o1 /* I/O AREA untouched in o0 */
- ba .L100_search_next_ahb_bus /* Do next bus */
- add %l0, 1, %l0
-
-.L100_return:
- mov %g1, %o7
- retl
- nop
-
-
-/* FUNCTION _nomem_amba_init(unsigned int ioarea)
- *
- * Find all AHB buses
- *
- * Constraints:
- * i6, i7, o6, o7, l7, l6, g3, g4, g5, g6, g7 is used by caller
- *
- * Arguments
- * - o0 Bridge Information: I/O AREA and parent bus
- *
- * Results
- * - o0 Number of AHB bridges found
- *
- * Clobbered
- * - l0, l1, l2, l3, l4, g1, g2 (used by _nomem_ambapp_find_buses)
- * - o0, o1, o2, o3 (Used as arguments)
- * - o5 (return address)
- * - g1 (level 1 return address)
- * - g2 (level 2 return address)
- */
-_nomem_amba_init:
- mov %o7, %o5 /* Save return address, o5 not used */
-
- /* Scan for buses, it will init i0-i5 */
- call _nomem_ambapp_find_buses
- nop
-
- mov %o5, %o7
- retl
- nop
-
-/* Call tree and their return address register
- *
- *_nomem_amba_scan (g1)
- * -> init_ahb_bridges (o7)
- * -> insert_ahb_bridge (o7)
- * -> _nomem_amba_scan (g2)
- * -> insert_ahb_bridge (o7)
- * -> get_ahb_bridge (o7)
- *
- *
- * -> _nomem_find_apb (g2)
- * -> get_ahb_bridge (o7)
- * -> _nomem_find_ahb_bus (o7)
- * -> _nomem_find_apb_bus (o7)
- * -> _nomem_find_ahb (g2)
- * -> get_ahb_bridge (o7)
- * -> _nomem_find_ahb_bus (o7)
- * -> mem_handler.func() (o7)
- *
- */
+++ /dev/null
-/* C-interface for AMBA PnP scanning functions implemented in
- * ambapp_low.S. At the point the memory and stack can be
- * used.
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
- .seg "text"
- .extern _nomem_ambapp_find_buses
- .extern _nomem_find_apb
- .extern _nomem_find_ahb
-
- .globl ambapp_find_buses
- .globl ambapp_find_apb
- .globl ambapp_find_ahb
-
-
-/* C-interface for _nomem_ambapp_find_buses used when memory is available.
- */
-ambapp_find_buses:
- save %sp, -104, %sp
- mov %i1, %l7 /* Save second argument */
- call _nomem_ambapp_find_buses
- mov %i0, %o0
-
- /* Store result */
- st %g0, [%l7+0x00]
- st %i0, [%l7+0x04]
- st %i1, [%l7+0x08]
- st %i2, [%l7+0x0c]
- st %i3, [%l7+0x10]
- st %i4, [%l7+0x14]
- st %i5, [%l7+0x18]
-
- ret
- restore
-
-/* C-interface for _nomem_find_apb used when memory is available.
- *
- * void ambapp_find_apb(
- * struct ambapp_bus *abus,
- * unsigned int dev_vend,
- * int index,
- * struct ambapp_find_apb_info *result
- * );
- *
- */
-ambapp_find_apb:
- save %sp, -104, %sp
-
- mov %i3, %l7 /* Save second argument */
- mov %i1, %o1
- mov %i2, %o2
-
- /* Initialize buses available in system */
- ld [%i0+0x08], %i1
- ld [%i0+0x0c], %i2
- ld [%i0+0x10], %i3
- ld [%i0+0x14], %i4
- ld [%i0+0x18], %i5
-
- call _nomem_find_apb
- ld [%i0+0x04], %i0
-
- st %o2, [%l7+0x08] /* Decremented Index */
- st %o3, [%l7] /* PnP configuration address of APB Device */
- st %o4, [%l7+0x04] /* AHB Bus Index of AHB/APB bridge and APB Device */
- mov %o0, %i0
- ret
- restore
-
-/* C-interface for _nomem_find_ahb used when memory is available.
- *
- * void ambapp_find_ahb(
- * struct ambapp_bus *abus,
- * unsigned int dev_vend,
- * int index,
- * int type,
- * struct ambapp_find_ahb_info *result
- * );
- *
- */
-ambapp_find_ahb:
- save %sp, -104, %sp
-
- mov %i4, %l7 /* Save second argument */
- clr %o0
- mov %i1, %o1
- mov %i2, %o2
- clr %o3
- clr %o4
- mov %i3, %o5
-
- /* Initialize buses available in system */
- ld [%i0+0x08], %i1
- ld [%i0+0x0c], %i2
- ld [%i0+0x10], %i3
- ld [%i0+0x14], %i4
- ld [%i0+0x18], %i5
-
- call _nomem_find_ahb
- ld [%i0+0x04], %i0
-
- st %o2, [%l7+0x08] /* Decremented Index */
- st %o3, [%l7] /* PnP configuration address of AHB Device */
- st %o4, [%l7+0x04] /* AHB Bus Index of AHB Device */
- mov %o0, %i0
- ret
- restore
+++ /dev/null
-/* CPU specific code for the LEON3 CPU
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <netdev.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <ambapp.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void _reset_reloc(void);
-
-int leon_cpu_cnt = 1;
-int leon_ver = 3;
-unsigned int leon_cpu_freq = CONFIG_SYS_CLK_FREQ;
-
-int cpu_freq(void)
-{
- ambapp_ahbdev dev;
-
- if (leon_ver == 3) {
- ambapp_ahbmst_find(&ambapp_plb, VENDOR_GAISLER,
- GAISLER_LEON3, 0, &dev);
- } else {
- ambapp_ahbmst_find(&ambapp_plb, VENDOR_GAISLER,
- GAISLER_LEON4, 0, &dev);
- }
-
- leon_cpu_freq = ambapp_bus_freq(&ambapp_plb, dev.ahb_bus_index);
-
- return 0;
-}
-
-int checkcpu(void)
-{
- int cnt;
- char str[4];
-
- /* check LEON version here */
- cnt = ambapp_ahbmst_count(&ambapp_plb, VENDOR_GAISLER, GAISLER_LEON3);
- if (cnt <= 0) {
- cnt = ambapp_ahbmst_count(&ambapp_plb, VENDOR_GAISLER,
- GAISLER_LEON4);
- if (cnt > 0)
- leon_ver = 4;
- }
-
- cpu_freq();
-
- str[0] = '\0';
- if (cnt > 1) {
- leon_cpu_cnt = cnt;
- str[0] = '0' + cnt;
- str[1] = 'x';
- str[2] = '\0';
- }
- printf("CPU: %sLEON%d @ %dMHz\n", str, leon_ver,
- leon_cpu_freq / 1000000);
-
- return 0;
-}
-
-#ifdef CONFIG_DISPLAY_CPUINFO
-
-int print_cpuinfo(void)
-{
- printf("CPU: LEON3\n");
- return 0;
-}
-
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-void cpu_reset(void)
-{
- /* Interrupts off */
- disable_interrupts();
-
- /* jump to restart in flash */
- _reset_reloc();
-}
-
-int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- cpu_reset();
-
- return 1;
-
-}
-
-u64 flash_read64(void *addr)
-{
- return __raw_readq(addr);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_GRETH
-int cpu_eth_init(bd_t *bis)
-{
- return greth_initialize(bis);
-}
-#endif
+++ /dev/null
-/* Initializes CPU and basic hardware such as memory
- * controllers, IRQ controller and system timer 0.
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/asi.h>
-#include <asm/leon.h>
-#include <asm/io.h>
-#include <ambapp.h>
-#include <grlib/irqmp.h>
-#include <grlib/gptimer.h>
-#include <debug_uart.h>
-
-#include <config.h>
-
-/* Default Plug&Play I/O area */
-#ifndef CONFIG_AMBAPP_IOAREA
-#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA
-#endif
-
-/* Select which TIMER that will become the time base */
-#ifndef CONFIG_SYS_GRLIB_GPTIMER_INDEX
-#define CONFIG_SYS_GRLIB_GPTIMER_INDEX 0
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-ambapp_dev_irqmp *irqmp = NULL;
-
-/*
- * Breath some life into the CPU...
- *
- * Run from FLASH/PROM:
- * - until memory controller is set up, only registers available
- * - memory controller has already been setup up, stack can be used
- * - no global variables available for writing
- * - constants available
- */
-void cpu_init_f(void)
-{
-#ifdef CONFIG_DEBUG_UART
- debug_uart_init();
-#endif
-}
-
-/* If cache snooping is available in hardware the result will be set
- * to 0x800000, otherwise 0.
- */
-static unsigned int snoop_detect(void)
-{
- unsigned int result;
- asm("lda [%%g0] 2, %0" : "=r"(result));
- return result & 0x00800000;
-}
-
-int arch_cpu_init(void)
-{
- ambapp_apbdev apbdev;
- int index;
-
- gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
- gd->bus_clk = CONFIG_SYS_CLK_FREQ;
- gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-
- gd->arch.snooping_available = snoop_detect();
-
- /* Initialize the AMBA Plug & Play bus structure, the bus
- * structure represents the AMBA bus that the CPU is located at.
- */
- ambapp_bus_init(CONFIG_AMBAPP_IOAREA, CONFIG_SYS_CLK_FREQ, &ambapp_plb);
-
- /* Initialize/clear all the timers in the system.
- */
- for (index = 0; ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER,
- GAISLER_GPTIMER, index, &apbdev) == 1; index++) {
- ambapp_dev_gptimer *timer;
- unsigned int bus_freq;
- int i, ntimers;
-
- timer = (ambapp_dev_gptimer *)apbdev.address;
-
- /* Different buses may have different frequency, the
- * frequency of the bus tell in which frequency the timer
- * prescaler operates.
- */
- bus_freq = ambapp_bus_freq(&ambapp_plb, apbdev.ahb_bus_index);
-
- /* Initialize prescaler common to all timers to 1MHz */
- timer->scalar = timer->scalar_reload =
- (((bus_freq / 1000) + 500) / 1000) - 1;
-
- /* Clear all timers */
- ntimers = timer->config & 0x7;
- for (i = 0; i < ntimers; i++) {
- timer->e[i].ctrl = GPTIMER_CTRL_IP;
- timer->e[i].rld = 0;
- timer->e[i].ctrl = GPTIMER_CTRL_LD;
- }
- }
-
- return 0;
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r(void)
-{
- ambapp_apbdev apbdev;
- int cpu;
-
- /*
- * Find AMBA APB IRQMP Controller,
- */
- if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER,
- GAISLER_IRQMP, 0, &apbdev) != 1) {
- panic("%s: IRQ controller not found\n", __func__);
- return -1;
- }
- irqmp = (ambapp_dev_irqmp *)apbdev.address;
-
- /* initialize the IRQMP */
- irqmp->ilevel = 0xf; /* all IRQ off */
- irqmp->iforce = 0;
- irqmp->ipend = 0;
- irqmp->iclear = 0xfffe; /* clear all old pending interrupts */
- for (cpu = 0; cpu < 16; cpu++) {
- /* mask and clear force for all IRQs on CPU[N] */
- irqmp->cpu_mask[cpu] = 0;
- irqmp->cpu_force[cpu] = 0;
- }
-
- return 0;
-}
-
- ;
-int timer_init(void)
-{
- ambapp_dev_gptimer_element *tmr;
- ambapp_dev_gptimer *gptimer;
- ambapp_apbdev apbdev;
- unsigned bus_freq;
-
- if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_GPTIMER,
- CONFIG_SYS_GRLIB_GPTIMER_INDEX, &apbdev) != 1) {
- panic("%s: gptimer not found!\n", __func__);
- return -1;
- }
-
- gptimer = (ambapp_dev_gptimer *) apbdev.address;
-
- /* Different buses may have different frequency, the
- * frequency of the bus tell in which frequency the timer
- * prescaler operates.
- */
- bus_freq = ambapp_bus_freq(&ambapp_plb, apbdev.ahb_bus_index);
-
- /* initialize prescaler common to all timers to 1MHz */
- gptimer->scalar = gptimer->scalar_reload =
- (((bus_freq / 1000) + 500) / 1000) - 1;
-
- tmr = (ambapp_dev_gptimer_element *)&gptimer->e[0];
-
- tmr->val = 0;
- tmr->rld = ~0;
- tmr->ctrl = GPTIMER_CTRL_EN | GPTIMER_CTRL_RS | GPTIMER_CTRL_LD;
-
- CONFIG_SYS_TIMER_COUNTER = (void *)&tmr->val;
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
- *
- * (C) Copyright 2006
- * Detlev Zundel, DENX Software Engineering, dzu@denx.de
- *
- * (C) Copyright -2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/stack.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <command.h>
-#include <asm/irq.h>
-
-#include <asm/leon.h>
-#include <ambapp.h>
-#include <grlib/irqmp.h>
-#include <grlib/gptimer.h>
-
-/* 15 normal irqs and a non maskable interrupt */
-#define NR_IRQS 15
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- unsigned int count;
-};
-
-extern ambapp_dev_irqmp *irqmp;
-extern ambapp_dev_gptimer *gptimer;
-
-static struct irq_action irq_handlers[NR_IRQS] = { {0}, };
-static int spurious_irq_cnt = 0;
-static int spurious_irq = 0;
-
-static inline unsigned int irqmp_get_irqmask(unsigned int irq)
-{
- if ((irq < 0) || (irq >= NR_IRQS)) {
- return 0;
- } else {
- return (1 << irq);
- }
-
-}
-
-static void leon3_ic_disable(unsigned int irq)
-{
- unsigned int mask, pil;
- if (!irqmp)
- return;
-
- pil = intLock();
-
- /* get mask of interrupt */
- mask = irqmp_get_irqmask(irq);
-
- /* set int level */
- irqmp->cpu_mask[0] = SPARC_NOCACHE_READ(&irqmp->cpu_mask[0]) & (~mask);
-
- intUnlock(pil);
-}
-
-static void leon3_ic_enable(unsigned int irq)
-{
- unsigned int mask, pil;
- if (!irqmp)
- return;
-
- pil = intLock();
-
- /* get mask of interrupt */
- mask = irqmp_get_irqmask(irq);
-
- /* set int level */
- irqmp->cpu_mask[0] = SPARC_NOCACHE_READ(&irqmp->cpu_mask[0]) | mask;
-
- intUnlock(pil);
-
-}
-
-void handler_irq(int irq, struct pt_regs *regs)
-{
- if (irq_handlers[irq].handler) {
- if (((unsigned int)irq_handlers[irq].handler > CONFIG_SYS_RAM_END) ||
- ((unsigned int)irq_handlers[irq].handler < CONFIG_SYS_RAM_BASE)
- ) {
- printf("handler_irq: bad handler: %x, irq number %d\n",
- (unsigned int)irq_handlers[irq].handler, irq);
- return;
- }
- irq_handlers[irq].handler(irq_handlers[irq].arg);
- irq_handlers[irq].count++;
- } else {
- spurious_irq_cnt++;
- spurious_irq = irq;
- }
-}
-
-void leon3_force_int(int irq)
-{
- if (!irqmp || (irq >= NR_IRQS) || (irq < 0))
- return;
- printf("Forcing interrupt %d\n", irq);
-
- irqmp->iforce = SPARC_NOCACHE_READ(&irqmp->iforce) | (1 << irq);
-}
-
-/****************************************************************************/
-
-int interrupt_init_cpu(void)
-{
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf("irq_install_handler: bad irq number %d\n", irq);
- return;
- }
-
- if (irq_handlers[irq].handler != NULL)
- printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
- (ulong) handler, (ulong) irq_handlers[irq].handler);
-
- if (((unsigned int)handler > CONFIG_SYS_RAM_END) ||
- ((unsigned int)handler < CONFIG_SYS_RAM_BASE)
- ) {
- printf("irq_install_handler: bad handler: %x, irq number %d\n",
- (unsigned int)handler, irq);
- return;
- }
- irq_handlers[irq].handler = handler;
- irq_handlers[irq].arg = arg;
-
- /* enable irq on IRQMP hardware */
- leon3_ic_enable(irq);
-
-}
-
-void irq_free_handler(int irq)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf("irq_free_handler: bad irq number %d\n", irq);
- return;
- }
-
- /* disable irq on IRQMP hardware */
- leon3_ic_disable(irq);
-
- irq_handlers[irq].handler = NULL;
- irq_handlers[irq].arg = NULL;
-}
-
-/****************************************************************************/
-
-#if defined(CONFIG_CMD_IRQ)
-void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char * const argv[])
-{
- int irq;
- unsigned int pil = get_pil();
- printf("PIL level: %u\n\r", pil);
- printf("Spurious IRQ: %u, last unknown IRQ: %d\n",
- spurious_irq_cnt, spurious_irq);
-
- puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n");
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- if (irq_handlers[irq].handler != NULL) {
- printf("%02d %p %p %d\n", irq,
- irq_handlers[irq].handler,
- irq_handlers[irq].arg,
- irq_handlers[irq].count);
- }
- }
-}
-#endif
+++ /dev/null
-/* GRLIB Memory controller setup. The register values are used
- * from the associated low level assembler routine implemented
- * in memcfg_low.S.
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <ambapp.h>
-#include "memcfg.h"
-#include <config.h>
-
-#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL1
-struct mctrl_setup esa_mctrl1_cfg = {
- .reg_mask = 0x7,
- .regs = {
- {
- .mask = 0x00000300,
- .value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1,
- },
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2,
- },
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3,
- },
- }
-};
-#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL2
-struct mctrl_setup esa_mctrl2_cfg = {
- .reg_mask = 0x7,
- .regs = {
- {
- .mask = 0x00000300,
- .value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG1,
- },
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG2,
- },
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG3,
- },
- }
-};
-#endif
-#endif
-
-#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-struct mctrl_setup gaisler_ftmctrl1_cfg = {
- .reg_mask = 0x7,
- .regs = {
- {
- .mask = 0x00000300,
- .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1,
- },
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2,
- },
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3,
- },
- }
-};
-#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2
-struct mctrl_setup gaisler_ftmctrl2_cfg = {
- .reg_mask = 0x7,
- .regs = {
- {
- .mask = 0x00000300,
- .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG1,
- },
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG2,
- },
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG3,
- },
- }
-};
-#endif
-#endif
-
-#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-struct mctrl_setup gaisler_sdctrl1_cfg = {
- .reg_mask = 0x1,
- .regs = {
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_SDCTRL1_CTRL,
- },
- }
-};
-#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL2
-struct mctrl_setup gaisler_sdctrl2_cfg = {
- .reg_mask = 0x1,
- .regs = {
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_SDCTRL2_CTRL,
- },
- }
-};
-#endif
-#endif
-
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-struct ahbmctrl_setup gaisler_ddr2spa1_cfg = {
- .ahb_mbar_no = 1,
- .reg_mask = 0xd,
- .regs = {
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG1,
- },
- { 0x00000000, 0},
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG3,
- },
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG4,
- },
- }
-};
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2
-struct ahbmctrl_setup gaisler_ddr2spa2_cfg = {
- .ahb_mbar_no = 1,
- .reg_mask = 0xd,
- .regs = {
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG1,
- },
- { 0x00000000, 0},
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG3,
- },
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG4,
- },
- }
-};
-#endif
-#endif
-
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-struct ahbmctrl_setup gaisler_ddrspa1_cfg = {
- .ahb_mbar_no = 1,
- .reg_mask = 0x1,
- .regs = {
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_DDRSPA1_CTRL,
- },
- }
-};
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA2
-struct ahbmctrl_setup gaisler_ddrspa2_cfg = {
- .ahb_mbar_no = 1,
- .reg_mask = 0x1,
- .regs = {
- {
- .mask = 0x00000000,
- .value = CONFIG_SYS_GRLIB_GAISLER_DDRSPA2_CTRL,
- },
- }
-};
-#endif
-#endif
-
-struct grlib_mctrl_handler grlib_mctrl_handlers[] = {
-/* ESA MCTRL (PROM/FLASH/IO/SRAM/SDRAM) */
-#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL1
- {DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_ESA, ESA_MCTRL),
- _nomem_mctrl_init, (void *)&esa_mctrl1_cfg},
-#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL2
- {DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_ESA, ESA_MCTRL),
- _nomem_mctrl_init, (void *)&esa_mctrl2_cfg},
-#endif
-#endif
-
-/* GAISLER Fault Tolerant Memory controller (PROM/FLASH/IO/SRAM/SDRAM) */
-#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
- {DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_FTMCTRL),
- _nomem_mctrl_init, (void *)&gaisler_ftmctrl1_cfg},
-#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2
- {DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_FTMCTRL),
- _nomem_mctrl_init, (void *)&gaisler_ftmctrl2_cfg},
-#endif
-#endif
-
-/* GAISLER SDRAM-only Memory controller (SDRAM) */
-#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
- {DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_SDCTRL),
- _nomem_mctrl_init, (void *)&gaisler_sdctrl1_cfg},
-#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL2
- {DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_SDCTRL),
- _nomem_mctrl_init, (void *)&gaisler_sdctrl2_cfg},
-#endif
-#endif
-
-/* GAISLER DDR Memory controller (DDR) */
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
- {DEV_AHB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDRSP),
- _nomem_ahbmctrl_init, (void *)&gaisler_ddrspa1_cfg},
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA2
- {DEV_AHB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDRSP),
- _nomem_ahbmctrl_init, (void *)&gaisler_ddrspa2_cfg},
-#endif
-#endif
-
-/* GAISLER DDR2 Memory controller (DDR2) */
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
- {DEV_AHB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDR2SP),
- _nomem_ahbmctrl_init, (void *)&gaisler_ddr2spa1_cfg},
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2
- {DEV_AHB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDR2SP),
- _nomem_ahbmctrl_init, (void *)&gaisler_ddr2spa2_cfg},
-#endif
-#endif
-
- /* Mark end */
- MH_END
-};
+++ /dev/null
-/* GRLIB Memory controller setup structures
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __MEMCFG_H__
-#define __MEMCFG_H__
-
-/*********** Low Level Memory Controller Initalization ***********/
-
-#ifndef __ASSEMBLER__
-
-struct grlib_mctrl_handler;
-
-typedef void (*mctrl_handler_t)(
- struct grlib_mctrl_handler *dev,
- void *conf,
- unsigned int ioarea
- );
-
-/* Memory Controller Handler Structure */
-struct grlib_mctrl_handler {
- unsigned char type; /* 0x00. MASK: AHB MST&SLV, APB SLV */
- char index; /* 0x01. Unit number, 0, 1, 2... */
- char unused[2]; /* 0x02 */
- unsigned int ven_dev; /* 0x04. Device and Vendor */
- mctrl_handler_t func; /* 0x08. Memory Controller Handler */
- void *priv; /* 0x0c. Optional private data, ptr to
- * info how to set up controller */
-};
-
-extern struct grlib_mctrl_handler grlib_mctrl_handlers[];
-
-#endif
-
-#define MH_STRUCT_SIZE (4*4)
-#define MH_TYPE 0x00
-#define MH_INDEX 0x01
-#define MH_VENDOR_DEVICE 0x04
-#define MH_FUNC 0x08
-#define MH_PRIV 0x0c
-
-#define MH_TYPE_NONE DEV_NONE
-#define MH_TYPE_AHB_MST DEV_AHB_MST
-#define MH_TYPE_AHB_SLV DEV_AHB_SLV
-#define MH_TYPE_APB_SLV DEV_APB_SLV
-
-#define MH_UNUSED {0, 0}
-#define MH_END {DEV_NONE, 0, MH_UNUSED, AMBA_PNP_ID(0, 0), 0, 0}
-
-/*********** Low Level Memory Controller Initalization Handlers ***********/
-
-#ifndef __ASSEMBLER__
-extern void _nomem_mctrl_init(
- struct grlib_mctrl_handler *dev,
- void *conf,
- unsigned int ioarea_apbmst);
-
-struct mctrl_setup {
- unsigned int reg_mask; /* Which registers to write */
- struct {
- unsigned int mask; /* Mask used keep reg bits unchanged */
- unsigned int value; /* Value written to register */
- } regs[8];
-};
-
-extern void _nomem_ahbmctrl_init(
- struct grlib_mctrl_handler *dev,
- void *conf,
- unsigned int ioarea_apbmst);
-
-struct ahbmctrl_setup {
- int ahb_mbar_no; /* MBAR to get register address from */
- unsigned int reg_mask; /* Which registers to write */
- struct {
- unsigned int mask; /* Mask used keep reg bits unchanged */
- unsigned int value; /* Value written to register */
- } regs[8];
-};
-#endif
-
-/* mctrl_setup data structure defines */
-#define NREGS_OFS 0
-#define REGS_OFS 0x4
-#define REGS_SIZE 8
-
-#endif
+++ /dev/null
-/* This is the memory initialization functions, the function
- * implemented below initializes each memory controller
- * found and specified by the input grlib_mctrl_handler structure.
- *
- * After the memory controllers have been initialized the stack
- * can be used.
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <ambapp.h>
-#include "memcfg.h"
-#include <config.h>
-
- .seg "text"
- .globl _nomem_memory_ctrl_init
- .globl _nomem_mctrl_init, _nomem_ahbmctrl_init
- .extern _nomem_find_apb
- .extern _nomem_find_ahb
-
-
-/* FUNCTION
- * _nomem_memory_controller_init(struct grlib_mctrl_handler *mem_handlers)
- *
- * Initialize AMBA devices, _nomem_amba_init() has prepared i0-i5
- * with the AHB buses on the system.
- *
- * For each entry in mem_handlers find the VENDOR:DEVICE and handle it
- * by calling the handler function pointer.
- *
- * Constraints:
- * i6, i7, o6, l7, l6, g3, g4, g5, g6, g7 is used by caller
- * o7 is return address
- * l5 reserved for this function for future use.
- *
- * Arguments
- * - o0 Pointer to memory handler array
- *
- * Results
- * - o0 Number of memory controllers found
- *
- * Clobbered
- * - o0 (Current AHB slave conf address)
- * - l0 (mem handler entry address)
- * - l1 (Return value, number of memory controllers found)
- * - o7 (function pointer)
- * - l0, l1, l2, l3, l4, g1, g2 (used by _nomem_ambapp_find_buses)
- * - o0, o1, o2, o3, o4, o5 (Used as arguments)
- *
- * - g1 ( level 1 return address)
- * - g2 ( level 2 return address)
- */
-
-_nomem_memory_ctrl_init:
- /* At this point all AHB buses has been found and the I/O Areas of
- * all AHB buses is stored in the i0-i5 registers. Max 6 buses. Next,
- * memory controllers are found by searching all buses for matching
- * VENDOR:DEVICE. The VENDOR:DEVICE to search for are taken from the
- * mem_handlers array. For each match the function pointer stored in
- * the mem_handler entry is called to handle the hardware setup.
- */
- mov %o7, %g1 /* Save return address */
- mov %o0, %l0
- mov %g0, %l1 /* The return value */
-
-.L_do_one_mem_handler:
- ld [%l0 + MH_FUNC], %o7
- cmp %o7, %g0
- be .L_all_mctrl_handled
- nop
-
- /*** Scan for memory controller ***/
-
- /* Set up argments, o5 not used by _nomem_find_apb */
- ldub [%l0 + MH_TYPE], %o5
- clr %o4
- clr %o3
- ldub [%l0 + MH_INDEX], %o2
- ld [%l0 + MH_VENDOR_DEVICE], %o1
-
- /* An empty config? */
- cmp %o5, DEV_NONE
- beq .L_all_mctrl_next
-
- /* Select function (APB or AHB) */
- cmp %o5, DEV_APB_SLV
- bne .L_find_ahb_memctrl
- clr %o0
-.L_find_apb_memctrl:
- call _nomem_find_apb /* Scan for APB slave device */
- nop
-
- /* o3 = iobar address
- * o4 = AHB Bus index
- *
- * REG ADR = ((iobar >> 12) & (iobar << 4) & 0xfff00) | "APB Base"
- */
- ld [%o3 + AMBA_APB_IOBAR_OFS], %o5
- srl %o5, 12, %o2
- sll %o5, 4, %o5
- and %o2, %o5, %o5
- set 0xfff00, %o2
- and %o2, %o5, %o5
- sethi %hi(0xfff00000), %o2
- and %o3, %o2, %o2
- or %o5, %o2, %o5 /* Register base address */
-
- ba .L_call_one_mem_handler
- nop
-
-.L_find_ahb_memctrl:
- call _nomem_find_ahb /* Scan for AHB Slave or Master.
- * o5 determine type. */
- nop
- clr %o5
-
- /* Call the handler function if the hardware was found
- *
- * o0 = mem_handler
- * o1 = Configuration address
- * o2 = AHB Bus index
- * o3 = APB Base register (if APB Slave)
- *
- * Constraints:
- * i0-i7, l0, l1, l5, g1, g3-g7 may no be used.
- */
-.L_call_one_mem_handler:
- cmp %o0, %g0
- be .L_all_mctrl_next
- mov %l0, %o0 /* Mem handler pointer */
- mov %o3, %o1 /* AMBA PnP Configuration address */
- mov %o4, %o2 /* AHB Bus index */
- ld [%l0 + MH_FUNC], %o7 /* Get Function pointer */
- call %o7
- mov %o5, %o3 /* APB Register Base Address */
-
- inc %l1 /* Number of Memory controllers
- * handled. */
-
- /* Do next entry in mem_handlers */
-.L_all_mctrl_next:
- ba .L_do_one_mem_handler
- add %l0, MH_STRUCT_SIZE, %l0
-
-.L_all_mctrl_handled:
- mov %g1, %o7 /* Restore return address */
- retl
- mov %l1, %o0
-
-
-
-/* Generic Memory controller initialization routine (APB Registers)
- *
- * o0 = mem_handler structure pointer
- * o1 = Configuration address
- * o2 = AHB Bus index
- * o3 = APB Base register
- *
- * Clobbered
- * o0-o4
- */
-_nomem_mctrl_init:
- ld [%o0 + MH_PRIV], %o0 /* Get Private structure */
- ld [%o0], %o1 /* Get Reg Mask */
- and %o1, 0xff, %o1
- add %o0, REGS_OFS, %o0 /* Point to first reg */
-.L_do_one_reg:
- andcc %o1, 0x1, %g0
- beq .L_do_next_reg
- ld [%o0], %o2
- ld [%o3], %o4
- and %o4, %o2, %o4
- ld [%o0 + 4], %o2
- or %o4, %o2, %o4
- st %o4, [%o3]
-
-.L_do_next_reg:
- add %o0, REGS_SIZE, %o0
- add %o3, 4, %o3
- srl %o1, 1, %o1
- cmp %o1, 0
- bne .L_do_one_reg
- nop
-
- /* No more registers to write */
- retl
- nop
-
-
-
-/* Generic Memory controller initialization routine (AHB Registers)
- *
- * o0 = mem_handler structure pointer
- * o1 = Configuration address of memory controller
- * o2 = AHB Bus index
- *
- * Clobbered
- * o0-o5
- */
-_nomem_ahbmctrl_init:
- ld [%o0 + MH_PRIV], %o0 /* Get Private structure */
-
- /* Get index of AHB MBAR to get registers from */
- ld [%o0], %o5
- add %o0, 4, %o0
-
- /* Get Address of MBAR in PnP info */
- add %o5, 4, %o5
- sll %o5, 2, %o5
- add %o5, %o1, %o5 /* Address of MBAR */
-
- /* Get Address of registers from PnP information
- * Address is in AHB I/O format, i.e. relative to bus
- *
- * ADR = (iobar & (iobar << 16) & 0xfff00000)
- * IOADR = (ADR >> 12) | "APB Base"
- */
- ld [%o5], %o5
- sll %o5, 16, %o4
- and %o5, %o4, %o5
- sethi %hi(0xfff00000), %o4
- and %o5, %o4, %o5 /* ADR */
- and %o4, %o1, %o4
- srl %o5, 12, %o5
- or %o5, %o4, %o3 /* IOADR in o3 */
-
- ld [%o0], %o1 /* Get Reg Mask */
- and %o1, 0xff, %o1
- add %o0, REGS_OFS, %o0 /* Point to first reg */
-.L_do_one_ahbreg:
- andcc %o1, 0x1, %g0
- beq .L_do_next_reg
- ld [%o0], %o2
- ld [%o3], %o4
- and %o4, %o2, %o4
- ld [%o0 + 4], %o2
- or %o4, %o2, %o4
- st %o4, [%o3]
-
-.L_do_next_ahbreg:
- add %o0, REGS_SIZE, %o0
- add %o3, 4, %o3
- srl %o1, 1, %o1
- cmp %o1, 0
- bne .L_do_one_reg
- nop
-
- /* No more registers to write */
- retl
- nop
+++ /dev/null
-/* prom.c - emulates a sparc v0 PROM for the linux kernel.
- *
- * Copyright (C) 2003 Konrad Eisele <eiselekd@web.de>
- * Copyright (C) 2004 Stefan Holst <mail@s-holst.de>
- * Copyright (C) 2007 Daniel Hellstrom <daniel@gaisler.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/prom.h>
-#include <asm/machines.h>
-#include <asm/srmmu.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/leon.h>
-#include <ambapp.h>
-#include <grlib/apbuart.h>
-#include <grlib/irqmp.h>
-#include <grlib/gptimer.h>
-
-#include <config.h>
-/*
-#define PRINT_ROM_VEC
-*/
-extern struct linux_romvec *kernel_arg_promvec;
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PROM_PGT __attribute__ ((__section__ (".prom.pgt")))
-#define PROM_TEXT __attribute__ ((__section__ (".prom.text")))
-#define PROM_DATA __attribute__ ((__section__ (".prom.data")))
-
-ambapp_dev_gptimer *gptimer;
-
-void *__prom_start_reloc; /* relocated prom_start address */
-
-/* for __va */
-extern int __prom_start;
-#define PAGE_OFFSET 0xf0000000
-#define phys_base CONFIG_SYS_SDRAM_BASE
-#define PROM_OFFS 8192
-#define PROM_SIZE_MASK (PROM_OFFS-1)
-#define __va(x) ( \
- (void *)( ((unsigned long)(x))-PROM_OFFS+ \
- (CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-CONFIG_SYS_TEXT_BASE ) \
- )
-#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-CONFIG_SYS_TEXT_BASE))
-
-struct property {
- char *name;
- char *value;
- int length;
-};
-
-struct node {
- int level;
- struct property *properties;
-};
-
-static void leon_reboot(char *bcommand);
-static void leon_halt(void);
-static int leon_nbputchar(int c);
-static int leon_nbgetchar(void);
-
-static int no_nextnode(int node);
-static int no_child(int node);
-static int no_proplen(int node, char *name);
-static int no_getprop(int node, char *name, char *value);
-static int no_setprop(int node, char *name, char *value, int len);
-static char *no_nextprop(int node, char *name);
-
-static struct property PROM_TEXT *find_property(int node, char *name);
-static int PROM_TEXT leon_strcmp(const char *s1, const char *s2);
-static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n);
-static void PROM_TEXT leon_reboot_physical(char *bcommand);
-
-void __inline__ leon_flush_cache_all(void)
-{
- __asm__ __volatile__(" flush ");
- __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_DFLUSH):"memory");
-}
-
-void __inline__ leon_flush_tlb_all(void)
-{
- leon_flush_cache_all();
- __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x400),
- "i"(ASI_MMUFLUSH):"memory");
-}
-
-typedef struct {
- unsigned int ctx_table[256];
- unsigned int pgd_table[256];
-} sparc_srmmu_setup;
-
-sparc_srmmu_setup srmmu_tables PROM_PGT = {
- {0},
- {0x1e,
- 0x10001e,
- 0x20001e,
- 0x30001e,
- 0x40001e,
- 0x50001e,
- 0x60001e,
- 0x70001e,
- 0x80001e,
- 0x90001e,
- 0xa0001e,
- 0xb0001e,
- 0xc0001e,
- 0xd0001e,
- 0xe0001e,
- 0xf0001e,
- 0x100001e,
- 0x110001e,
- 0x120001e,
- 0x130001e,
- 0x140001e,
- 0x150001e,
- 0x160001e,
- 0x170001e,
- 0x180001e,
- 0x190001e,
- 0x1a0001e,
- 0x1b0001e,
- 0x1c0001e,
- 0x1d0001e,
- 0x1e0001e,
- 0x1f0001e,
- 0x200001e,
- 0x210001e,
- 0x220001e,
- 0x230001e,
- 0x240001e,
- 0x250001e,
- 0x260001e,
- 0x270001e,
- 0x280001e,
- 0x290001e,
- 0x2a0001e,
- 0x2b0001e,
- 0x2c0001e,
- 0x2d0001e,
- 0x2e0001e,
- 0x2f0001e,
- 0x300001e,
- 0x310001e,
- 0x320001e,
- 0x330001e,
- 0x340001e,
- 0x350001e,
- 0x360001e,
- 0x370001e,
- 0x380001e,
- 0x390001e,
- 0x3a0001e,
- 0x3b0001e,
- 0x3c0001e,
- 0x3d0001e,
- 0x3e0001e,
- 0x3f0001e,
- 0x400001e,
- 0x410001e,
- 0x420001e,
- 0x430001e,
- 0x440001e,
- 0x450001e,
- 0x460001e,
- 0x470001e,
- 0x480001e,
- 0x490001e,
- 0x4a0001e,
- 0x4b0001e,
- 0x4c0001e,
- 0x4d0001e,
- 0x4e0001e,
- 0x4f0001e,
- 0x500001e,
- 0x510001e,
- 0x520001e,
- 0x530001e,
- 0x540001e,
- 0x550001e,
- 0x560001e,
- 0x570001e,
- 0x580001e,
- 0x590001e,
- 0x5a0001e,
- 0x5b0001e,
- 0x5c0001e,
- 0x5d0001e,
- 0x5e0001e,
- 0x5f0001e,
- 0x600001e,
- 0x610001e,
- 0x620001e,
- 0x630001e,
- 0x640001e,
- 0x650001e,
- 0x660001e,
- 0x670001e,
- 0x680001e,
- 0x690001e,
- 0x6a0001e,
- 0x6b0001e,
- 0x6c0001e,
- 0x6d0001e,
- 0x6e0001e,
- 0x6f0001e,
- 0x700001e,
- 0x710001e,
- 0x720001e,
- 0x730001e,
- 0x740001e,
- 0x750001e,
- 0x760001e,
- 0x770001e,
- 0x780001e,
- 0x790001e,
- 0x7a0001e,
- 0x7b0001e,
- 0x7c0001e,
- 0x7d0001e,
- 0x7e0001e,
- 0x7f0001e,
- 0x800001e,
- 0x810001e,
- 0x820001e,
- 0x830001e,
- 0x840001e,
- 0x850001e,
- 0x860001e,
- 0x870001e,
- 0x880001e,
- 0x890001e,
- 0x8a0001e,
- 0x8b0001e,
- 0x8c0001e,
- 0x8d0001e,
- 0x8e0001e,
- 0x8f0001e,
- 0x900001e,
- 0x910001e,
- 0x920001e,
- 0x930001e,
- 0x940001e,
- 0x950001e,
- 0x960001e,
- 0x970001e,
- 0x980001e,
- 0x990001e,
- 0x9a0001e,
- 0x9b0001e,
- 0x9c0001e,
- 0x9d0001e,
- 0x9e0001e,
- 0x9f0001e,
- 0xa00001e,
- 0xa10001e,
- 0xa20001e,
- 0xa30001e,
- 0xa40001e,
- 0xa50001e,
- 0xa60001e,
- 0xa70001e,
- 0xa80001e,
- 0xa90001e,
- 0xaa0001e,
- 0xab0001e,
- 0xac0001e,
- 0xad0001e,
- 0xae0001e,
- 0xaf0001e,
- 0xb00001e,
- 0xb10001e,
- 0xb20001e,
- 0xb30001e,
- 0xb40001e,
- 0xb50001e,
- 0xb60001e,
- 0xb70001e,
- 0xb80001e,
- 0xb90001e,
- 0xba0001e,
- 0xbb0001e,
- 0xbc0001e,
- 0xbd0001e,
- 0xbe0001e,
- 0xbf0001e,
- 0xc00001e,
- 0xc10001e,
- 0xc20001e,
- 0xc30001e,
- 0xc40001e,
- 0xc50001e,
- 0xc60001e,
- 0xc70001e,
- 0xc80001e,
- 0xc90001e,
- 0xca0001e,
- 0xcb0001e,
- 0xcc0001e,
- 0xcd0001e,
- 0xce0001e,
- 0xcf0001e,
- 0xd00001e,
- 0xd10001e,
- 0xd20001e,
- 0xd30001e,
- 0xd40001e,
- 0xd50001e,
- 0xd60001e,
- 0xd70001e,
- 0xd80001e,
- 0xd90001e,
- 0xda0001e,
- 0xdb0001e,
- 0xdc0001e,
- 0xdd0001e,
- 0xde0001e,
- 0xdf0001e,
- 0xe00001e,
- 0xe10001e,
- 0xe20001e,
- 0xe30001e,
- 0xe40001e,
- 0xe50001e,
- 0xe60001e,
- 0xe70001e,
- 0xe80001e,
- 0xe90001e,
- 0xea0001e,
- 0xeb0001e,
- 0xec0001e,
- 0xed0001e,
- 0xee0001e,
- 0xef0001e,
- 0x400001e /* default */
- }
-};
-
-/* a self contained prom info structure */
-struct leon_reloc_func {
- struct property *(*find_property) (int node, char *name);
- int (*strcmp) (char *s1, char *s2);
- void *(*memcpy) (void *dest, const void *src, size_t n);
- void (*reboot_physical) (char *cmd);
- ambapp_dev_apbuart *leon3_apbuart;
-};
-
-struct leon_prom_info {
- int freq_khz;
- int leon_nctx;
- int mids[32];
- int baudrates[2];
- struct leon_reloc_func reloc_funcs;
- struct property root_properties[4];
- struct property cpu_properties[7];
-#undef CPUENTRY
-#define CPUENTRY(idx) struct property cpu_properties##idx[4]
- CPUENTRY(1);
- CPUENTRY(2);
- CPUENTRY(3);
- CPUENTRY(4);
- CPUENTRY(5);
- CPUENTRY(6);
- CPUENTRY(7);
- CPUENTRY(8);
- CPUENTRY(9);
- CPUENTRY(10);
- CPUENTRY(11);
- CPUENTRY(12);
- CPUENTRY(13);
- CPUENTRY(14);
- CPUENTRY(15);
- CPUENTRY(16);
- CPUENTRY(17);
- CPUENTRY(18);
- CPUENTRY(19);
- CPUENTRY(20);
- CPUENTRY(21);
- CPUENTRY(22);
- CPUENTRY(23);
- CPUENTRY(24);
- CPUENTRY(25);
- CPUENTRY(26);
- CPUENTRY(27);
- CPUENTRY(28);
- CPUENTRY(29);
- CPUENTRY(30);
- CPUENTRY(31);
- struct idprom idprom;
- struct linux_nodeops nodeops;
- struct linux_mlist_v0 *totphys_p;
- struct linux_mlist_v0 totphys;
- struct linux_mlist_v0 *avail_p;
- struct linux_mlist_v0 avail;
- struct linux_mlist_v0 *prommap_p;
- void (*synchook) (void);
- struct linux_arguments_v0 *bootargs_p;
- struct linux_arguments_v0 bootargs;
- struct linux_romvec romvec;
- struct node nodes[35];
- char s_device_type[12];
- char s_cpu[4];
- char s_mid[4];
- char s_idprom[7];
- char s_compatability[14];
- char s_leon2[6];
- char s_mmu_nctx[9];
- char s_frequency[16];
- char s_uart1_baud[11];
- char s_uart2_baud[11];
- char arg[256];
-};
-
-/* static prom info */
-static struct leon_prom_info PROM_DATA spi = {
- CONFIG_SYS_CLK_FREQ / 1000,
- 256,
- {
-#undef CPUENTRY
-#define CPUENTRY(idx) idx
- CPUENTRY(0),
- CPUENTRY(1),
- CPUENTRY(2),
- CPUENTRY(3),
- CPUENTRY(4),
- CPUENTRY(5),
- CPUENTRY(6),
- CPUENTRY(7),
- CPUENTRY(8),
- CPUENTRY(9),
- CPUENTRY(10),
- CPUENTRY(11),
- CPUENTRY(12),
- CPUENTRY(13),
- CPUENTRY(14),
- CPUENTRY(15),
- CPUENTRY(16),
- CPUENTRY(17),
- CPUENTRY(18),
- CPUENTRY(19),
- CPUENTRY(20),
- CPUENTRY(21),
- CPUENTRY(22),
- CPUENTRY(23),
- CPUENTRY(24),
- CPUENTRY(25),
- CPUENTRY(26),
- CPUENTRY(27),
- CPUENTRY(28),
- CPUENTRY(29),
- CPUENTRY(30),
- 31},
- {38400, 38400},
- {
- __va(find_property),
- __va(leon_strcmp),
- __va(leon_memcpy),
- __phy(leon_reboot_physical),
- },
- {
- {__va(spi.s_device_type), __va(spi.s_idprom), 4},
- {__va(spi.s_idprom), (char *)__va(&spi.idprom), sizeof(struct idprom)},
- {__va(spi.s_compatability), __va(spi.s_leon2), 5},
- {NULL, NULL, -1}
- },
- {
- {__va(spi.s_device_type), __va(spi.s_cpu), 4},
- {__va(spi.s_mid), __va(&spi.mids[0]), 4},
- {__va(spi.s_mmu_nctx), (char *)__va(&spi.leon_nctx), 4},
- {__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4},
- {__va(spi.s_uart1_baud), (char *)__va(&spi.baudrates[0]), 4},
- {__va(spi.s_uart2_baud), (char *)__va(&spi.baudrates[1]), 4},
- {NULL, NULL, -1}
- },
-#undef CPUENTRY
-#define CPUENTRY(idx) \
- { /* cpu_properties */ \
- {__va(spi.s_device_type), __va(spi.s_cpu), 4}, \
- {__va(spi.s_mid), __va(&spi.mids[idx]), 4}, \
- {__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4}, \
- {NULL, NULL, -1} \
- }
- CPUENTRY(1),
- CPUENTRY(2),
- CPUENTRY(3),
- CPUENTRY(4),
- CPUENTRY(5),
- CPUENTRY(6),
- CPUENTRY(7),
- CPUENTRY(8),
- CPUENTRY(9),
- CPUENTRY(10),
- CPUENTRY(11),
- CPUENTRY(12),
- CPUENTRY(13),
- CPUENTRY(14),
- CPUENTRY(15),
- CPUENTRY(16),
- CPUENTRY(17),
- CPUENTRY(18),
- CPUENTRY(19),
- CPUENTRY(20),
- CPUENTRY(21),
- CPUENTRY(22),
- CPUENTRY(23),
- CPUENTRY(24),
- CPUENTRY(25),
- CPUENTRY(26),
- CPUENTRY(27),
- CPUENTRY(28),
- CPUENTRY(29),
- CPUENTRY(30),
- CPUENTRY(31),
- {
- 0x01, /* format */
- M_LEON2 | M_LEON2_SOC, /* machine type */
- {0, 0, 0, 0, 0, 0}, /* eth */
- 0, /* date */
- 0, /* sernum */
- 0, /* checksum */
- {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* reserved */
- },
- {
- __va(no_nextnode),
- __va(no_child),
- __va(no_proplen),
- __va(no_getprop),
- __va(no_setprop),
- __va(no_nextprop)
- },
- __va(&spi.totphys),
- {
- NULL,
- (char *)CONFIG_SYS_SDRAM_BASE,
- 0,
- },
- __va(&spi.avail),
- {
- NULL,
- (char *)CONFIG_SYS_SDRAM_BASE,
- 0,
- },
- NULL, /* prommap_p */
- NULL,
- __va(&spi.bootargs),
- {
- {NULL, __va(spi.arg), NULL /*... */ },
- /*... */
- },
- {
- 0,
- 0, /* sun4c v0 prom */
- 0, 0,
- {__va(&spi.totphys_p), __va(&spi.prommap_p), __va(&spi.avail_p)},
- __va(&spi.nodeops),
- NULL, {NULL /* ... */ },
- NULL, NULL,
- NULL, NULL, /* pv_getchar, pv_putchar */
- __va(leon_nbgetchar), __va(leon_nbputchar),
- NULL,
- __va(leon_reboot),
- NULL,
- NULL,
- NULL,
- __va(leon_halt),
- __va(&spi.synchook),
- {NULL},
- __va(&spi.bootargs_p)
- /*... */
- },
- {
- {0, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ },
- {0, __va(spi.root_properties)},
- /* cpu 0, must be spi.nodes[2] see leon_prom_init() */
- {1, __va(spi.cpu_properties)},
-
-#undef CPUENTRY
-#define CPUENTRY(idx) \
- {1, __va(spi.cpu_properties##idx) } /* cpu <idx> */
- CPUENTRY(1),
- CPUENTRY(2),
- CPUENTRY(3),
- CPUENTRY(4),
- CPUENTRY(5),
- CPUENTRY(6),
- CPUENTRY(7),
- CPUENTRY(8),
- CPUENTRY(9),
- CPUENTRY(10),
- CPUENTRY(11),
- CPUENTRY(12),
- CPUENTRY(13),
- CPUENTRY(14),
- CPUENTRY(15),
- CPUENTRY(16),
- CPUENTRY(17),
- CPUENTRY(18),
- CPUENTRY(19),
- CPUENTRY(20),
- CPUENTRY(21),
- CPUENTRY(22),
- CPUENTRY(23),
- CPUENTRY(24),
- CPUENTRY(25),
- CPUENTRY(26),
- CPUENTRY(27),
- CPUENTRY(28),
- CPUENTRY(29),
- CPUENTRY(30),
- CPUENTRY(31),
- {-1, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ }
- },
- "device_type",
- "cpu",
- "mid",
- "idprom",
- "compatability",
- "leon2",
- "mmu-nctx",
- "clock-frequency",
- "uart1_baud",
- "uart2_baud",
- CONFIG_DEFAULT_KERNEL_COMMAND_LINE
-};
-
-/* from arch/sparc/kernel/setup.c */
-#define RAMDISK_LOAD_FLAG 0x4000
-extern unsigned short root_flags;
-extern unsigned short root_dev;
-extern unsigned short ram_flags;
-extern unsigned int sparc_ramdisk_image;
-extern unsigned int sparc_ramdisk_size;
-extern int root_mountflags;
-
-extern char initrd_end, initrd_start;
-
-/* Reboot the CPU = jump to beginning of flash again.
- *
- * Make sure that all function are inlined here.
- */
-static void PROM_TEXT leon_reboot(char *bcommand)
-{
- register char *arg = bcommand;
- void __attribute__ ((noreturn)) (*reboot_physical) (char *cmd);
-
- /* get physical address */
- struct leon_prom_info *pspi =
- (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- unsigned int *srmmu_ctx_table;
-
- /* Turn of Interrupts */
- set_pil(0xf);
-
- /* Set kernel's context, context zero */
- srmmu_set_context(0);
-
- /* Get physical address of the MMU shutdown routine */
- reboot_physical = (void *)
- SPARC_BYPASS_READ(&pspi->reloc_funcs.reboot_physical);
-
- /* Now that we know the physical address of the function
- * we can make the MMU allow jumping to it.
- */
- srmmu_ctx_table = (unsigned int *)srmmu_get_ctable_ptr();
-
- srmmu_ctx_table = (unsigned int *)SPARC_BYPASS_READ(srmmu_ctx_table);
-
- /* get physical address of kernel's context table (assume ptd) */
- srmmu_ctx_table = (unsigned int *)
- (((unsigned int)srmmu_ctx_table & 0xfffffffc) << 4);
-
- /* enable access to physical address of MMU shutdown function */
- SPARC_BYPASS_WRITE(&srmmu_ctx_table
- [((unsigned int)reboot_physical) >> 24],
- (((unsigned int)reboot_physical & 0xff000000) >> 4) |
- 0x1e);
-
- /* flush TLB cache */
- leon_flush_tlb_all();
-
- /* flash instruction & data cache */
- sparc_icache_flush_all();
- sparc_dcache_flush_all();
-
- /* jump to physical address function
- * so that when the MMU is disabled
- * we can continue to execute
- */
- reboot_physical(arg);
-}
-
-static void PROM_TEXT leon_reboot_physical(char *bcommand)
-{
- void __attribute__ ((noreturn)) (*reset) (void);
-
- /* Turn off MMU */
- srmmu_set_mmureg(0);
-
- /* Hardcoded start address */
- reset = CONFIG_SYS_MONITOR_BASE;
-
- /* flush data cache */
- sparc_dcache_flush_all();
-
- /* flush instruction cache */
- sparc_icache_flush_all();
-
- /* Jump to start in Flash */
- reset();
-}
-
-static void PROM_TEXT leon_halt(void)
-{
- while (1) ;
-}
-
-/* get single char, don't care for blocking*/
-static int PROM_TEXT leon_nbgetchar(void)
-{
- return -1;
-}
-
-/* put single char, don't care for blocking*/
-static int PROM_TEXT leon_nbputchar(int c)
-{
- ambapp_dev_apbuart *uart;
-
- /* get physical address */
- struct leon_prom_info *pspi =
- (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- uart = (ambapp_dev_apbuart *)
- SPARC_BYPASS_READ(&pspi->reloc_funcs.leon3_apbuart);
-
- /* no UART? */
- if (!uart)
- return 0;
-
- /***** put char in buffer... ***********
- * Make sure all functions are inline! *
- ***************************************/
-
- /* Wait for last character to go. */
- while (!(SPARC_BYPASS_READ(&uart->status)
- & APBUART_STATUS_THE));
-
- /* Send data */
- SPARC_BYPASS_WRITE(&uart->data, c);
-
- /* Wait for data to be sent */
- while (!(SPARC_BYPASS_READ(&uart->status)
- & APBUART_STATUS_TSE));
-
- return 0;
-}
-
-/* node ops */
-
-/*#define nodes ((struct node *)__va(&pspi->nodes))*/
-#define nodes ((struct node *)(pspi->nodes))
-
-static int PROM_TEXT no_nextnode(int node)
-{
- /* get physical address */
- struct leon_prom_info *pspi =
- (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- if (nodes[node].level == nodes[node + 1].level)
- return node + 1;
- return -1;
-}
-
-static int PROM_TEXT no_child(int node)
-{
- /* get physical address */
- struct leon_prom_info *pspi = (struct leon_prom_info *)
- (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- if (nodes[node].level == nodes[node + 1].level - 1)
- return node + 1;
- return -1;
-}
-
-static struct property PROM_TEXT *find_property(int node, char *name)
-{
- /* get physical address */
- struct leon_prom_info *pspi = (struct leon_prom_info *)
- (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- struct property *prop = &nodes[node].properties[0];
- while (prop && prop->name) {
- if (pspi->reloc_funcs.strcmp(prop->name, name) == 0)
- return prop;
- prop++;
- }
- return NULL;
-}
-
-static int PROM_TEXT no_proplen(int node, char *name)
-{
- /* get physical address */
- struct leon_prom_info *pspi = (struct leon_prom_info *)
- (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- struct property *prop = pspi->reloc_funcs.find_property(node, name);
- if (prop)
- return prop->length;
- return -1;
-}
-
-static int PROM_TEXT no_getprop(int node, char *name, char *value)
-{
- /* get physical address */
- struct leon_prom_info *pspi = (struct leon_prom_info *)
- (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- struct property *prop = pspi->reloc_funcs.find_property(node, name);
- if (prop) {
- pspi->reloc_funcs.memcpy(value, prop->value, prop->length);
- return 1;
- }
- return -1;
-}
-
-static int PROM_TEXT no_setprop(int node, char *name, char *value, int len)
-{
- return -1;
-}
-
-static char PROM_TEXT *no_nextprop(int node, char *name)
-{
- /* get physical address */
- struct leon_prom_info *pspi = (struct leon_prom_info *)
- (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
- struct property *prop;
-
- /* convert into virtual address */
- pspi = (struct leon_prom_info *)
- (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
- if (!name || !name[0])
- return nodes[node].properties[0].name;
-
- prop = pspi->reloc_funcs.find_property(node, name);
- if (prop)
- return prop[1].name;
- return NULL;
-}
-
-static int PROM_TEXT leon_strcmp(const char *s1, const char *s2)
-{
- register char result;
-
- while (1) {
- result = *s1 - *s2;
- if (result || !*s1)
- break;
- s2++;
- s1++;
- }
-
- return result;
-}
-
-static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n)
-{
- char *dst = (char *)dest, *source = (char *)src;
-
- while (n--) {
- *dst = *source;
- dst++;
- source++;
- }
- return dest;
-}
-
-#define GETREGSP(sp) __asm__ __volatile__("mov %%sp, %0" : "=r" (sp))
-
-void leon_prom_init(struct leon_prom_info *pspi)
-{
- unsigned long i;
- unsigned char cksum, *ptr;
- char *addr_str, *end;
- unsigned long sp;
- GETREGSP(sp);
-
- pspi->freq_khz = CONFIG_SYS_CLK_FREQ / 1000;
-
- /* Set Available main memory size */
- pspi->totphys.num_bytes = CONFIG_SYS_PROM_OFFSET - CONFIG_SYS_SDRAM_BASE;
- pspi->avail.num_bytes = pspi->totphys.num_bytes;
-
- /* Set the pointer to the Console UART in romvec */
- pspi->reloc_funcs.leon3_apbuart = gd->arch.uart;
-
- {
- int j = 1;
-#ifdef CONFIG_SMP
- ambapp_dev_irqmp *b;
- b = (ambapp_dev_irqmp *) leon3_getapbbase(VENDOR_GAISLER,
- GAISLER_IRQMP);
- if (b) {
- j = 1 + ((LEON3_BYPASS_LOAD_PA(&(b->mpstatus))
- >> LEON3_IRQMPSTATUS_CPUNR) & 0xf);
- }
-#endif
-#undef nodes
- pspi->nodes[2 + j].level = -1;
- pspi->nodes[2 + j].properties = __va(spi.root_properties + 3);
- }
-
- /* Set Ethernet MAC address from environment */
- if ((addr_str = getenv("ethaddr")) != NULL) {
- for (i = 0; i < 6; i++) {
- pspi->idprom.id_ethaddr[i] = addr_str ?
- simple_strtoul(addr_str, &end, 16) : 0;
- if (addr_str) {
- addr_str = (*end) ? end + 1 : end;
- }
- }
- } else {
- /* HW Address not found in environment,
- * Set default HW address
- */
- pspi->idprom.id_ethaddr[0] = 0;
- pspi->idprom.id_ethaddr[1] = 0;
- pspi->idprom.id_ethaddr[2] = 0;
- pspi->idprom.id_ethaddr[3] = 0;
- pspi->idprom.id_ethaddr[4] = 0;
- pspi->idprom.id_ethaddr[5] = 0;
- }
-
- ptr = (unsigned char *)&pspi->idprom;
- for (i = cksum = 0; i <= 0x0E; i++)
- cksum ^= *ptr++;
- pspi->idprom.id_cksum = cksum;
-}
-
-static inline void set_cache(unsigned long regval)
-{
- asm volatile ("sta %0, [%%g0] %1\n\t":: "r" (regval), "i"(2):"memory");
-}
-
-extern unsigned short bss_start, bss_end;
-
-/* mark as section .img.main.text, to be referenced in linker script */
-int prom_init(void)
-{
- struct leon_prom_info *pspi = (void *)
- ((((unsigned int)&spi) & PROM_SIZE_MASK) + CONFIG_SYS_PROM_OFFSET);
-
- /* disable mmu */
- srmmu_set_mmureg(0x00000000);
- __asm__ __volatile__("flush\n\t");
-
- /* init prom info struct */
- leon_prom_init(pspi);
-
- kernel_arg_promvec = &pspi->romvec;
-#ifdef PRINT_ROM_VEC
- printf("Kernel rom vec: 0x%lx\n", (unsigned int)(&pspi->romvec));
-#endif
- return 0;
-}
-
-/* Copy current kernel boot argument to ROMvec */
-void prepare_bootargs(char *bootargs)
-{
- struct leon_prom_info *pspi;
- char *src, *dst;
- int left;
-
- /* if no bootargs set, skip copying ==> default bootline */
- if (bootargs && (*bootargs != '\0')) {
- pspi = (void *)((((unsigned int)&spi) & PROM_SIZE_MASK) +
- CONFIG_SYS_PROM_OFFSET);
- src = bootargs;
- dst = &pspi->arg[0];
- left = 255; /* max len */
- while (*src && left > 0) {
- *dst++ = *src++;
- left--;
- }
- /* terminate kernel command line string */
- *dst = 0;
- }
-}
-
-void srmmu_init_cpu(unsigned int entry)
-{
- sparc_srmmu_setup *psrmmu_tables = (void *)
- ((((unsigned int)&srmmu_tables) & PROM_SIZE_MASK) +
- CONFIG_SYS_PROM_OFFSET);
-
- /* Make context 0 (kernel's context) point
- * to our prepared memory mapping
- */
-#define PTD 1
- psrmmu_tables->ctx_table[0] =
- ((unsigned int)&psrmmu_tables->pgd_table[0x00]) >> 4 | PTD;
-
- /* Set virtual kernel address 0xf0000000
- * to SRAM/SDRAM address.
- * Make it READ/WRITE/EXEC to SuperUser
- */
-#define PTE 2
-#define ACC_SU_ALL 0x1c
- psrmmu_tables->pgd_table[0xf0] =
- (CONFIG_SYS_SDRAM_BASE >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf1] =
- ((CONFIG_SYS_SDRAM_BASE + 0x1000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf2] =
- ((CONFIG_SYS_SDRAM_BASE + 0x2000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf3] =
- ((CONFIG_SYS_SDRAM_BASE + 0x3000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf4] =
- ((CONFIG_SYS_SDRAM_BASE + 0x4000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf5] =
- ((CONFIG_SYS_SDRAM_BASE + 0x5000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf6] =
- ((CONFIG_SYS_SDRAM_BASE + 0x6000000) >> 4) | ACC_SU_ALL | PTE;
- psrmmu_tables->pgd_table[0xf7] =
- ((CONFIG_SYS_SDRAM_BASE + 0x7000000) >> 4) | ACC_SU_ALL | PTE;
-
- /* convert rom vec pointer to virtual address */
- kernel_arg_promvec = (struct linux_romvec *)
- (((unsigned int)kernel_arg_promvec & 0x0fffffff) | 0xf0000000);
-
- /* Set Context pointer to point to context table
- * 256 contexts supported.
- */
- srmmu_set_ctable_ptr((unsigned int)&psrmmu_tables->ctx_table[0]);
-
- /* Set kernel's context, context zero */
- srmmu_set_context(0);
-
- /* Invalidate all Cache */
- __asm__ __volatile__("flush\n\t");
-
- srmmu_set_mmureg(0x00000001);
- leon_flush_tlb_all();
- leon_flush_cache_all();
-}
+++ /dev/null
-/* GRLIB APBUART Serial controller driver
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <ambapp.h>
-#include <grlib/apbuart.h>
-#include <serial.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Select which UART that will become u-boot console */
-#ifndef CONFIG_SYS_GRLIB_APBUART_INDEX
-/* Try to use CONFIG_CONS_INDEX, if available, it is numbered from 1 */
-#ifdef CONFIG_CONS_INDEX
-#define CONFIG_SYS_GRLIB_APBUART_INDEX (CONFIG_CONS_INDEX - 1)
-#else
-#define CONFIG_SYS_GRLIB_APBUART_INDEX 0
-#endif
-#endif
-
-static unsigned apbuart_calc_scaler(unsigned apbuart_freq, unsigned baud)
-{
- return (((apbuart_freq * 10) / (baud * 8)) - 5) / 10;
-}
-
-static int leon3_serial_init(void)
-{
- ambapp_dev_apbuart *uart;
- ambapp_apbdev apbdev;
- unsigned int tmp;
-
- /* find UART */
- if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_APBUART,
- CONFIG_SYS_GRLIB_APBUART_INDEX, &apbdev) != 1) {
- gd->flags &= ~GD_FLG_SERIAL_READY;
- panic("%s: apbuart not found!\n", __func__);
- return -1; /* didn't find hardware */
- }
-
- /* found apbuart, let's init .. */
- uart = (ambapp_dev_apbuart *) apbdev.address;
-
- /* APBUART Frequency is equal to bus frequency */
- gd->arch.uart_freq = ambapp_bus_freq(&ambapp_plb, apbdev.ahb_bus_index);
-
- /* Set scaler / baud rate */
- tmp = apbuart_calc_scaler(gd->arch.uart_freq, CONFIG_BAUDRATE);
- writel(tmp, &uart->scaler);
-
- /* Let bit 11 be unchanged (debug bit for GRMON) */
- tmp = readl(&uart->ctrl) & APBUART_CTRL_DBG;
- /* Receiver & transmitter enable */
- tmp |= APBUART_CTRL_RE | APBUART_CTRL_TE;
- writel(tmp, &uart->ctrl);
-
- gd->arch.uart = uart;
- return 0;
-}
-
-static inline ambapp_dev_apbuart *leon3_get_uart_regs(void)
-{
- ambapp_dev_apbuart *uart = gd->arch.uart;
- return uart;
-}
-
-static void leon3_serial_putc_raw(const char c)
-{
- ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
-
- if (!uart)
- return;
-
- /* Wait for last character to go. */
- while (!(readl(&uart->status) & APBUART_STATUS_THE))
- WATCHDOG_RESET();
-
- /* Send data */
- writel(c, &uart->data);
-
-#ifdef LEON_DEBUG
- /* Wait for data to be sent */
- while (!(readl(&uart->status) & APBUART_STATUS_TSE))
- WATCHDOG_RESET();
-#endif
-}
-
-static void leon3_serial_putc(const char c)
-{
- if (c == '\n')
- leon3_serial_putc_raw('\r');
-
- leon3_serial_putc_raw(c);
-}
-
-static int leon3_serial_getc(void)
-{
- ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
-
- if (!uart)
- return 0;
-
- /* Wait for a character to arrive. */
- while (!(readl(&uart->status) & APBUART_STATUS_DR))
- WATCHDOG_RESET();
-
- /* Read character data */
- return readl(&uart->data);
-}
-
-static int leon3_serial_tstc(void)
-{
- ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
-
- if (!uart)
- return 0;
-
- return readl(&uart->status) & APBUART_STATUS_DR;
-}
-
-/* set baud rate for uart */
-static void leon3_serial_setbrg(void)
-{
- ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
- unsigned int scaler;
-
- if (!uart)
- return;
-
- if (!gd->baudrate)
- gd->baudrate = CONFIG_BAUDRATE;
-
- if (!gd->arch.uart_freq)
- gd->arch.uart_freq = CONFIG_SYS_CLK_FREQ;
-
- scaler = apbuart_calc_scaler(gd->arch.uart_freq, gd->baudrate);
-
- writel(scaler, &uart->scaler);
-}
-
-static struct serial_device leon3_serial_drv = {
- .name = "leon3_serial",
- .start = leon3_serial_init,
- .stop = NULL,
- .setbrg = leon3_serial_setbrg,
- .putc = leon3_serial_putc,
- .puts = default_serial_puts,
- .getc = leon3_serial_getc,
- .tstc = leon3_serial_tstc,
-};
-
-void leon3_serial_initialize(void)
-{
- serial_register(&leon3_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &leon3_serial_drv;
-}
-
-#ifdef CONFIG_DEBUG_UART_APBUART
-
-#include <debug_uart.h>
-
-static inline void _debug_uart_init(void)
-{
- ambapp_dev_apbuart *uart = (ambapp_dev_apbuart *)CONFIG_DEBUG_UART_BASE;
- uart->scaler = apbuart_calc_scaler(CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
- uart->ctrl = APBUART_CTRL_RE | APBUART_CTRL_TE;
-}
-
-static inline void _debug_uart_putc(int ch)
-{
- ambapp_dev_apbuart *uart = (ambapp_dev_apbuart *)CONFIG_DEBUG_UART_BASE;
- while (!(readl(&uart->status) & APBUART_STATUS_THE))
- WATCHDOG_RESET();
- writel(ch, &uart->data);
-}
-
-DEBUG_UART_FUNCS
-
-#endif
+++ /dev/null
-/* This is where the SPARC/LEON3 starts
- *
- * Copyright (C) 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/asmmacro.h>
-#include <asm/winmacro.h>
-#include <asm/psr.h>
-#include <asm/stack.h>
-#include <asm/leon.h>
-#include <ambapp.h>
-
-/* Default Plug&Play I/O area */
-#ifndef CONFIG_AMBAPP_IOAREA
-#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA
-#endif
-
-/* Default number of SPARC register windows */
-#ifndef CONFIG_SYS_SPARC_NWINDOWS
-#define CONFIG_SYS_SPARC_NWINDOWS 8
-#endif
-
-/* Entry for traps which jump to a programmer-specified trap handler. */
-#define TRAPR(H) \
- wr %g0, 0xfe0, %psr; \
- mov %g0, %tbr; \
- ba (H); \
- mov %g0, %wim;
-
-#define TRAP(H) \
- mov %psr, %l0; \
- ba (H); \
- nop; nop;
-
-#define TRAPI(ilevel) \
- mov ilevel, %l7; \
- mov %psr, %l0; \
- b _irq_entry; \
- mov %wim, %l3
-
-/* Unexcpected trap will halt the processor by forcing it to error state */
-#undef BAD_TRAP
-#define BAD_TRAP ta 0; nop; nop; nop;
-
-/* Software trap. Treat as BAD_TRAP for the time being... */
-#define SOFT_TRAP TRAP(_hwerr)
-
-#define PSR_INIT 0x1FC0 /* Disable traps, set s and ps */
-#define WIM_INIT 2
-
-/* All traps low-level code here must end with this macro. */
-#define RESTORE_ALL b ret_trap_entry; clr %l6;
-
-#define WRITE_PAUSE nop;nop;nop
-
-WINDOWSIZE = (16 * 4)
-ARGPUSHSIZE = (6 * 4)
-ARGPUSH = (WINDOWSIZE + 4)
-MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
-
-/* Number of register windows */
-#ifndef CONFIG_SYS_SPARC_NWINDOWS
-#error Must define number of SPARC register windows, default is 8
-#endif
-
-/* Macros to load address into a register. Uses GOT table for PIC */
-#ifdef __PIC__
-
-#define SPARC_PIC_THUNK_CALL(reg) \
- sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \
- call __sparc_get_pc_thunk.reg; \
- add %##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg;
-
-#define SPARC_LOAD_ADDRESS(sym, got, reg) \
- sethi %gdop_hix22(sym), %##reg; \
- xor %##reg, %gdop_lox10(sym), %##reg; \
- ld [%##got + %##reg], %##reg, %gdop(sym);
-
-#else
-
-#define SPARC_PIC_THUNK_CALL(reg)
-#define SPARC_LOAD_ADDRESS(sym, got, tmp) \
- set sym, %##reg;
-
-#endif
-
-#define STACK_ALIGN 8
-#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
-
- .section ".start", "ax"
- .globl _start, start, _trap_table
- .globl _irq_entry, nmi_trap
- .globl _reset_reloc
-
-/* at address 0
- * Hardware traps
- */
-start:
-_start:
-_trap_table:
- TRAPR(_hardreset); ! 00 reset trap
- BAD_TRAP; ! 01 instruction_access_exception
- BAD_TRAP; ! 02 illegal_instruction
- BAD_TRAP; ! 03 priveleged_instruction
- BAD_TRAP; ! 04 fp_disabled
- TRAP(_window_overflow); ! 05 window_overflow
- TRAP(_window_underflow); ! 06 window_underflow
- BAD_TRAP; ! 07 Memory Address Not Aligned
- BAD_TRAP; ! 08 Floating Point Exception
- BAD_TRAP; ! 09 Data Miss Exception
- BAD_TRAP; ! 0a Tagged Instruction Ovrflw
- BAD_TRAP; ! 0b Watchpoint Detected
- BAD_TRAP; ! 0c
- BAD_TRAP; ! 0d
- BAD_TRAP; ! 0e
- BAD_TRAP; ! 0f
- BAD_TRAP; ! 10
- TRAPI(1); ! 11 IRQ level 1
- TRAPI(2); ! 12 IRQ level 2
- TRAPI(3); ! 13 IRQ level 3
- TRAPI(4); ! 14 IRQ level 4
- TRAPI(5); ! 15 IRQ level 5
- TRAPI(6); ! 16 IRQ level 6
- TRAPI(7); ! 17 IRQ level 7
- TRAPI(8); ! 18 IRQ level 8
- TRAPI(9); ! 19 IRQ level 9
- TRAPI(10); ! 1a IRQ level 10
- TRAPI(11); ! 1b IRQ level 11
- TRAPI(12); ! 1c IRQ level 12
- TRAPI(13); ! 1d IRQ level 13
- TRAPI(14); ! 1e IRQ level 14
- TRAP(_nmi_trap); ! 1f IRQ level 15 /
- ! NMI (non maskable interrupt)
- BAD_TRAP; ! 20 r_register_access_error
- BAD_TRAP; ! 21 instruction access error
- BAD_TRAP; ! 22
- BAD_TRAP; ! 23
- BAD_TRAP; ! 24 co-processor disabled
- BAD_TRAP; ! 25 uniplemented FLUSH
- BAD_TRAP; ! 26
- BAD_TRAP; ! 27
- BAD_TRAP; ! 28 co-processor exception
- BAD_TRAP; ! 29 data access error
- BAD_TRAP; ! 2a division by zero
- BAD_TRAP; ! 2b data store error
- BAD_TRAP; ! 2c data access MMU miss
- BAD_TRAP; ! 2d
- BAD_TRAP; ! 2e
- BAD_TRAP; ! 2f
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 30-33
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 34-37
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 38-3b
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 3c-3f
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 40-43
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 44-47
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 48-4b
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 4c-4f
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 50-53
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 54-57
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 58-5b
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 5c-5f
-
- /* implementaion dependent */
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 60-63
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 64-67
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 68-6b
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 6c-6f
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 70-73
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 74-77
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 78-7b
- BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 7c-7f
-
- /* Software traps, not handled */
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 80-83
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 84-87
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 88-8b
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 8c-8f
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 90-93
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 94-97
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 98-9b
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 9c-9f
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a0-a3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a4-a7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a8-ab
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ac-af
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b0-b3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b4-b7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b8-bb
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! bc-bf
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c0-c3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c4-c7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c8-cb
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! cc-cf
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d0-d3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d4-d7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d8-db
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! dc-df
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e0-e3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e4-e7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e8-eb
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ec-ef
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f0-f3
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f4-f7
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f8-fb
- SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! fc-ff
-
- .section ".text"
- .extern _nomem_amba_init, _nomem_memory_ctrl_init
- .align 4
-
-_hardreset:
-1000:
- flush
-
- /* Enable I/D-Cache and Snooping */
- set 0x0081000f, %g2
- sta %g2, [%g0] 2
-
- mov %g0, %y
- clr %g1
- clr %g2
- clr %g3
- clr %g4
- clr %g5
- clr %g6
- clr %g7
-
- mov %asr17, %g3
- and %g3, 0x1f, %g3
-clear_window:
- mov %g0, %l0
- mov %g0, %l1
- mov %g0, %l2
- mov %g0, %l3
- mov %g0, %l4
- mov %g0, %l5
- mov %g0, %l6
- mov %g0, %l7
- mov %g0, %o0
- mov %g0, %o1
- mov %g0, %o2
- mov %g0, %o3
- mov %g0, %o4
- mov %g0, %o5
- mov %g0, %o6
- mov %g0, %o7
- subcc %g3, 1, %g3
- bge clear_window
- save
-
-wiminit:
- set WIM_INIT, %g3
- mov %g3, %wim
-
-stackinit:
- set CONFIG_SYS_INIT_SP_OFFSET, %fp
- andn %fp, 0x0f, %fp
- sub %fp, 64, %sp
-
-tbrinit:
- set CONFIG_SYS_TEXT_BASE, %g2
- wr %g0, %g2, %tbr
- nop
- nop
- nop
-
-/* Obtain the address of _GLOBAL_OFFSET_TABLE_ */
- SPARC_PIC_THUNK_CALL(l7)
-
-/* Scan AMBA Bus for AMBA buses using PnP information. All found
- * AMBA buses I/O area will be located in i0-i5 upon return.
- * The i0-i5 registers are later used by _nomem_amba_init2
- */
-ambainit:
- call _nomem_amba_init
- sethi %hi(CONFIG_AMBAPP_IOAREA), %o0
-
-/* Scan AMBA Buses for memory controllers, then initialize the
- * memory controllers. Note that before setting up the memory controller
- * the stack can not be used.
- */
-memory_ctrl_init:
- SPARC_LOAD_ADDRESS(grlib_mctrl_handlers, l7, o0)
-
- call _nomem_memory_ctrl_init
- nop
-
-/* The return valu indicate how many memory controllers where found and
- * initialized, if no memory controller was initialized, we can not continue
- * because from here on we expect memory to be working.
- */
- cmp %o0, 0
-memory_ctrl_init_failed:
- beq memory_ctrl_init_failed
- nop
-
-/*** From now on the stack can be used. ***/
-
-cpu_init_unreloc:
- call cpu_init_f
- nop
-
-board_init_unreloc:
- call board_init_f
- clr %o0 ! boot_flags
-
-dead_unreloc:
- mov 1, %g1 ! For GRMON2 to exit normally.
- ta 0 ! If board_init_f call returns.. (unlikely)
- nop
- nop
- ba dead_unreloc ! infinte loop
- nop
-
-!-------------------------------------------------------------------------------
-
-/* void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM after
- * relocating the monitor code.
- *
- * %o0 = Relocated stack pointer
- * %o1 = Relocated global data pointer
- * %o2 = Relocated text pointer
- *
- * %l7 = _GLOBAL_OFFSET_TABLE_ address
- */
- .globl relocate_code
- .type relocate_code, #function
- .align 4
-relocate_code:
- !SPARC_PIC_THUNK_CALL(l7)
-reloc:
- SPARC_LOAD_ADDRESS(_text, l7, g2) ! start address of monitor
- SPARC_LOAD_ADDRESS(__init_end, l7, g3) ! end address of monitor
- mov %o2, %g4 ! relocation address
- sub %g4, %g2, %g6 ! relocation offset
- /* copy .text & .data to relocated address */
-10: ldd [%g2], %l0
- ldd [%g2+8], %l2
- std %l0, [%g4]
- std %l2, [%g4+8]
- inc 16, %g2 ! src += 16
- cmp %g2, %g3
- bcs 10b ! while (src < end)
- inc 16, %g4 ! dst += 16
-
- clr %l0
- clr %l1
- clr %l2
- clr %l3
- clr %g2
-
-/* register g4 contain address to start
- * This means that BSS must be directly after data and code segments
- *
- * g3 is length of bss = (__bss_end-__bss_start)
- *
- */
-
- /* clear the relocated .bss area */
-clr_bss:
- SPARC_LOAD_ADDRESS(__bss_start, l7, g2)
- SPARC_LOAD_ADDRESS(__bss_end, l7, g3)
- sub %g3,%g2,%g3 ! length of .bss area
- add %g3,%g4,%g3
- /* clearing 16byte a time ==> linker script need to align to 16 byte offset */
- clr %g1 /* std %g0 uses g0 and g1 */
-20:
- std %g0, [%g4]
- std %g0, [%g4+8]
- inc 16, %g4 ! ptr += 16
- cmp %g4, %g3
- bcs 20b ! while (ptr < end)
- nop
-
- /* add offsets to GOT table */
-fixup_got:
- SPARC_LOAD_ADDRESS(__got_start, l7, g4)
- add %g4, %g6, %g4
- SPARC_LOAD_ADDRESS(__got_end, l7, g3)
- add %g3, %g6, %g3
-30: ld [%g4], %l0
-#ifdef CONFIG_RELOC_GOT_SKIP_NULL
- cmp %l0, 0
- be 32f
-#endif
- add %l0, %g6, %l0 ! relocate GOT pointer
- st %l0, [%g4]
-32: inc 4, %g4 ! ptr += 4
- cmp %g4, %g3
- bcs 30b ! while (ptr < end)
- nop
-
-prom_relocate:
- SPARC_LOAD_ADDRESS(__prom_start, l7, g2)
- SPARC_LOAD_ADDRESS(__prom_end, l7, g3)
- /*
- * Calculated addres is stored in this variable by
- * reserve_prom() function in common/board_f.c
- */
- SPARC_LOAD_ADDRESS(__prom_start_reloc, l7, g4)
- ld [%g4], %g4
-
-40: ldd [%g2], %l0
- ldd [%g2+8], %l2
- std %l0, [%g4]
- std %l2, [%g4+8]
- inc 16, %g2
- cmp %g2, %g3
- bcs 40b
- inc 16, %g4
-
-! %o0 = stack pointer (relocated)
-! %o1 = global data pointer (relocated)
-! %o2 = text pointer (relocated)
-
-! %g6 = relocation offset
-! %l7 = _GLOBAL_OFFSET_TABLE_
-
-/* Trap table has been moved, lets tell CPU about
- * the new trap table address
- */
-update_trap_table_address:
- wr %g0, %o2, %tbr
- nop
- nop
- nop
-
-update_stack_pointers:
- mov %o0, %fp
- andn %fp, 0x0f, %fp ! align to 16 bytes
- add %fp, -64, %fp ! make space for a window push
- mov %fp, %sp ! setup stack pointer
-
-jump_board_init_r:
- mov %o1, %o0 ! relocated global data pointer
- mov %o2, %o1 ! relocated text pointer
- SPARC_LOAD_ADDRESS(board_init_r, l7, o3)
- add %o3, %g6, %o3 ! add relocation offset
- call %o3
- nop
-
-dead:
- mov 1, %g1 ! For GRMON2 to exit normally.
- ta 0 ! if call returns.. (unlikely)
- nop
- b dead ! infinte loop
- nop
-
-!------------------------------------------------------------------------------
-
-/* Interrupt handler caller,
- * reg L7: interrupt number
- * reg L0: psr after interrupt
- * reg L1: PC
- * reg L2: next PC
- * reg L3: wim
- */
-_irq_entry:
- SAVE_ALL
-
- or %l0, PSR_PIL, %g2
- wr %g2, 0x0, %psr
- WRITE_PAUSE
- wr %g2, PSR_ET, %psr
- WRITE_PAUSE
- mov %l7, %o0 ! irq level
- set handler_irq, %o1
- set (CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o2
- add %o1, %o2, %o1
- call %o1
- add %sp, SF_REGS_SZ, %o1 ! pt_regs ptr
- or %l0, PSR_PIL, %g2 ! restore PIL after handler_irq
- wr %g2, PSR_ET, %psr ! keep ET up
- WRITE_PAUSE
-
- RESTORE_ALL
-
-!------------------------------------------------------------------------------
-
-/*
- * Window overflow trap handler
- */
- .global _window_overflow
-
-_window_overflow:
-
- mov %wim, %l3 ! Calculate next WIM
- mov %g1, %l7
- srl %l3, 1, %g1
- sll %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l4
- or %g1, %l4, %g1
- save ! Get into window to be saved.
- mov %g1, %wim
- nop; nop; nop
- st %l0, [%sp + 0] ! Save window to the stack
- st %l1, [%sp + 4]
- st %l2, [%sp + 8]
- st %l3, [%sp + 12]
- st %l4, [%sp + 16]
- st %l5, [%sp + 20]
- st %l6, [%sp + 24]
- st %l7, [%sp + 28]
- st %i0, [%sp + 32]
- st %i1, [%sp + 36]
- st %i2, [%sp + 40]
- st %i3, [%sp + 44]
- st %i4, [%sp + 48]
- st %i5, [%sp + 52]
- st %i6, [%sp + 56]
- st %i7, [%sp + 60]
- restore ! Go back to trap window.
- mov %l7, %g1
- jmp %l1 ! Re-execute save.
- rett %l2
-
-/*
- * Window underflow trap handler
- */
- .global _window_underflow
-
-_window_underflow:
-
- mov %wim, %l3 ! Calculate next WIM
- srl %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l5
- sll %l3, 1, %l4
- or %l5, %l4, %l5
- mov %l5, %wim
- nop; nop; nop
- restore ! Two restores to get into the
- restore ! window to restore
- ld [%sp + 0], %l0; ! Restore window from the stack
- ld [%sp + 4], %l1;
- ld [%sp + 8], %l2;
- ld [%sp + 12], %l3;
- ld [%sp + 16], %l4;
- ld [%sp + 20], %l5;
- ld [%sp + 24], %l6;
- ld [%sp + 28], %l7;
- ld [%sp + 32], %i0;
- ld [%sp + 36], %i1;
- ld [%sp + 40], %i2;
- ld [%sp + 44], %i3;
- ld [%sp + 48], %i4;
- ld [%sp + 52], %i5;
- ld [%sp + 56], %i6;
- ld [%sp + 60], %i7;
- save ! Get back to the trap window.
- save
- jmp %l1 ! Re-execute restore.
- rett %l2
-
-!------------------------------------------------------------------------------
-
-_nmi_trap:
- nop
- jmp %l1
- rett %l2
-
-_hwerr:
- ta 0
- nop
- nop
- b _hwerr ! loop infinite
- nop
-
-/* Registers to not touch at all. */
-#define t_psr l0 /* Set by caller */
-#define t_pc l1 /* Set by caller */
-#define t_npc l2 /* Set by caller */
-#define t_wim l3 /* Set by caller */
-#define t_twinmask l4 /* Set at beginning of this entry routine. */
-#define t_kstack l5 /* Set right before pt_regs frame is built */
-#define t_retpc l6 /* If you change this, change winmacro.h header file */
-#define t_systable l7 /* Never touch this, could be the syscall table ptr. */
-#define curptr g6 /* Set after pt_regs frame is built */
-
-trap_setup:
-/* build a pt_regs trap frame. */
- sub %fp, (SF_REGS_SZ + PT_REGS_SZ), %t_kstack
- PT_STORE_ALL(t_kstack, t_psr, t_pc, t_npc, g2)
-
- /* See if we are in the trap window. */
- mov 1, %t_twinmask
- sll %t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr)
- andcc %t_twinmask, %t_wim, %g0
- beq 1f ! in trap window, clean up
- nop
-
- /*-------------------------------------------------
- * Spill , adjust %wim and go.
- */
- srl %t_wim, 0x1, %g2 ! begin computation of new %wim
-
- set (CONFIG_SYS_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1
-
- sll %t_wim, %g3, %t_wim ! NWINDOWS-1
- or %t_wim, %g2, %g2
- and %g2, 0xff, %g2
-
- save %g0, %g0, %g0 ! get in window to be saved
-
- /* Set new %wim value */
- wr %g2, 0x0, %wim
-
- /* Save the kernel window onto the corresponding stack. */
- RW_STORE(sp)
-
- restore %g0, %g0, %g0
- /*-------------------------------------------------*/
-
-1:
- /* Trap from kernel with a window available.
- * Just do it...
- */
- jmpl %t_retpc + 0x8, %g0 ! return to caller
- mov %t_kstack, %sp ! jump onto new stack
-
-#define twin_tmp1 l4
-#define glob_tmp g4
-#define curptr g6
-ret_trap_entry:
- wr %t_psr, 0x0, %psr ! enable nesting again, clear ET
-
- /* Will the rett land us in the invalid window? */
- mov 2, %g1
- sll %g1, %t_psr, %g1
-
- set CONFIG_SYS_SPARC_NWINDOWS, %g2 !NWINDOWS
-
- srl %g1, %g2, %g2
- or %g1, %g2, %g1
- rd %wim, %g2
- andcc %g2, %g1, %g0
- be 1f ! Nope, just return from the trap
- sll %g2, 0x1, %g1
-
- /* We have to grab a window before returning. */
- set (CONFIG_SYS_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1
-
- srl %g2, %g3, %g2
- or %g1, %g2, %g1
- and %g1, 0xff, %g1
-
- wr %g1, 0x0, %wim
-
- /* Grrr, make sure we load from the right %sp... */
- PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
-
- restore %g0, %g0, %g0
- RW_LOAD(sp)
- b 2f
- save %g0, %g0, %g0
-
- /* Reload the entire frame in case this is from a
- * kernel system call or whatever...
- */
-1:
- PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
-2:
- wr %t_psr, 0x0, %psr
- nop;
- nop;
- nop
-
- jmp %t_pc
- rett %t_npc
-
-/* This is called from relocated C-code.
- * It resets the system by jumping to _start
- */
-_reset_reloc:
- set start, %l0
- call %l0
- nop
+++ /dev/null
-/*
- * Part of this code has been derived from linux:
- * Universal Host Controller Interface driver for USB (take II).
- *
- * (c) 1999-2001 Georg Acher, acher@in.tum.de (executive slave) (base guitar)
- * Deti Fliegl, deti@fliegl.de (executive slave) (lead voice)
- * Thomas Sailer, sailer@ife.ee.ethz.ch (chief consultant) (cheer leader)
- * Roman Weissgaerber, weissg@vienna.at (virt root hub) (studio porter)
- * (c) 2000 Yggdrasil Computing, Inc. (port of new PCI interface support
- * from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
- * (C) 2000 David Brownell, david-b@pacbell.net (usb-ohci.c)
- *
- * HW-initalization based on material of
- *
- * (C) Copyright 1999 Linus Torvalds
- * (C) Copyright 1999 Johannes Erdfelt
- * (C) Copyright 1999 Randy Dunlap
- * (C) Copyright 1999 Gregory P. Smith
- *
- *
- * Adapted for U-Boot:
- * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
- * (C) Copyright 2008, Daniel Hellström, daniel@gaisler.com
- * Added AMBA Plug&Play detection of GRUSB, modified interrupt handler.
- * Added cache flushes where needed.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/**********************************************************************
- * How it works:
- * -------------
- * The framelist / Transfer descriptor / Queue Heads are similar like
- * in the linux usb_uhci.c.
- *
- * During initialization, the following skeleton is allocated in init_skel:
- *
- * framespecific | common chain
- *
- * framelist[]
- * [ 0 ]-----> TD ---------\
- * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL
- * ... TD ---------/
- * [1023]-----> TD --------/
- *
- * ^^ ^^ ^^ ^^ ^^
- * 7 TDs for 1 TD for Start of Start of End Chain
- * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain
- *
- *
- * Since this is a bootloader, the isochronous transfer descriptor have been removed.
- *
- * Interrupt Transfers.
- * --------------------
- * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
- * will be inserted after the appropriate (depending the interval setting) skeleton TD.
- * If an interrupt has been detected the dev->irqhandler is called. The status and number
- * of transferred bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
- * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned,
- * the interrupt TD will be reactivated.
- *
- * Control Transfers
- * -----------------
- * Control Transfers are issued by filling the tmp_td with the appropriate data and connect
- * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued,
- * the programm has to wait for completion. This does not allows asynchronous data transfer.
- *
- * Bulk Transfers
- * --------------
- * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect
- * them to the qh_bulk queue header. Before other control/bulk transfers can be issued,
- * the programm has to wait for completion. This does not allows asynchronous data transfer.
- *
- *
- */
-
-#include <common.h>
-#include <ambapp.h>
-#include <asm/leon.h>
-#include <asm/leon3.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_USB_UHCI
-
-#include <usb.h>
-#include "usb_uhci.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */
-#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */
-
-/*
-#define out16r(address,data) (*(unsigned short *)(address) = \
- (unsigned short)( \
- (((unsigned short)(data)&0xff)<<8) | \
- (((unsigned short)(data)&0xff00)>>8) \
- ))
- */
-#define out16r(address,data) _out16r((unsigned int)(address), (unsigned short)(data))
-void _out16r(unsigned int address, unsigned short data)
-{
- unsigned short val = (unsigned short)((((unsigned short)(data) & 0xff)
- << 8) | (((unsigned short)(data)
- & 0xff00) >> 8));
-#ifdef UHCI_DEBUG_REGS
- printf("out16r(0x%lx,0x%04x = 0x%04x)\n", address, val, data);
-#endif
- *(unsigned short *)(address) = val;
-}
-
-#define out32r(address,data) _out32r((unsigned int)(address), (unsigned int)(data))
-void _out32r(unsigned int address, unsigned int data)
-{
- unsigned int val = (unsigned int)((((unsigned int)(data) & 0x000000ff)
- << 24) | (((unsigned int)(data) &
- 0x0000ff00) << 8) |
- (((unsigned int)(data) & 0x00ff0000)
- >> 8) | (((unsigned int)(data) &
- 0xff000000) >> 24));
-#ifdef UHCI_DEBUG_REGS
- printf("out32r(0x%lx,0x%lx = 0x%lx)\n", address, val, data);
-#endif
- *(unsigned int *)address = val;
-}
-
-#define in16r(address) _in16r((unsigned int)(address))
-unsigned short _in16r(unsigned int address)
-{
- unsigned short val = sparc_load_reg_cachemiss_word(address);
- val = ((val << 8) & 0xff00) | ((val >> 8) & 0xff);
-#ifdef UHCI_DEBUG_REGS
- printf("in16r(0x%lx): 0x%04x\n", address, val);
-#endif
- return val;
-}
-
-#define in32r(address) _in32r((unsigned int)(address))
-unsigned int _in32r(unsigned int address)
-{
- unsigned int val = sparc_load_reg_cachemiss(address);
- val =
- ((val << 24) & 0xff000000) | ((val << 8) & 0xff0000) | ((val >> 8) &
- 0xff00) |
- ((val >> 24) & 0xff);
-#ifdef UHCI_DEBUG_REGS
- printf("in32r(0x%lx): 0x%08x\n", address, val);
-#endif
- return val;
-}
-
-#define READ32(address) sparc_load_reg_cachemiss((unsigned int)(address))
-
-/*#define USB_UHCI_DEBUG*/
-#undef USB_UHCI_DEBUG
-
-void usb_show_td(int max);
-#ifdef USB_UHCI_DEBUG
-void grusb_show_regs(void);
-#define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define USB_UHCI_PRINTF(fmt,args...)
-#endif
-
-static int grusb_irq = -1; /* irq vector, if -1 uhci is stopped / reseted */
-unsigned int usb_base_addr; /* base address */
-
-static uhci_td_t td_int[8] __attribute__ ((aligned(16))); /* Interrupt Transfer descriptors */
-static uhci_qh_t qh_cntrl __attribute__ ((aligned(16))); /* control Queue Head */
-static uhci_qh_t qh_bulk __attribute__ ((aligned(16))); /* bulk Queue Head */
-static uhci_qh_t qh_end __attribute__ ((aligned(16))); /* end Queue Head */
-static uhci_td_t td_last __attribute__ ((aligned(16))); /* last TD (linked with end chain) */
-
-/* temporary tds */
-static uhci_td_t tmp_td[USB_MAX_TEMP_TD] __attribute__ ((aligned(16))); /* temporary bulk/control td's */
-static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD] __attribute__ ((aligned(16))); /* temporary interrupt td's */
-
-static unsigned long framelist[1024] __attribute__ ((aligned(0x1000))); /* frame list */
-
-static struct virt_root_hub rh; /* struct for root hub */
-
-/**********************************************************************
- * some forward decleration
- */
-int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int transfer_len,
- struct devrequest *setup);
-
-/* fill a td with the approproiate data. Link, status, info and buffer
- * are used by the USB controller itselfes, dev is used to identify the
- * "connected" device
- */
-void usb_fill_td(uhci_td_t * td, unsigned long link, unsigned long status,
- unsigned long info, unsigned long buffer, unsigned long dev)
-{
- td->link = swap_32(link);
- td->status = swap_32(status);
- if ((info & UHCI_PID) == 0)
- info |= USB_PID_OUT;
- td->info = swap_32(info);
- td->buffer = swap_32(buffer);
- td->dev_ptr = dev;
-}
-
-/* fill a qh with the approproiate data. Head and element are used by the USB controller
- * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh.
- * Please note, that after completion of the td chain, the entry element is removed /
- * marked invalid by the USB controller.
- */
-void usb_fill_qh(uhci_qh_t * qh, unsigned long head, unsigned long element)
-{
- qh->head = swap_32(head);
- qh->element = swap_32(element);
- qh->dev_ptr = 0L;
-}
-
-/* get the status of a td->status
- */
-unsigned long usb_uhci_td_stat(unsigned long status)
-{
- unsigned long result = 0;
- result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0;
- result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0;
- result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0;
- result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0;
- result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0;
- result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0;
- result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0;
- return result;
-}
-
-/* get the status and the transferred len of a td chain.
- * called from the completion handler
- */
-int usb_get_td_status(uhci_td_t * td, struct usb_device *dev)
-{
- unsigned long temp, info;
- unsigned long stat;
- uhci_td_t *mytd = td;
-
- if (dev->devnum == rh.devnum)
- return 0;
- dev->act_len = 0;
- stat = 0;
- do {
- temp = swap_32((unsigned long)READ32(&mytd->status));
- stat = usb_uhci_td_stat(temp);
- info = swap_32((unsigned long)READ32(&mytd->info));
- if (((info & 0xff) != USB_PID_SETUP) && (((info >> 21) & 0x7ff) != 0x7ff) && (temp & 0x7FF) != 0x7ff) { /* if not setup and not null data pack */
- dev->act_len += (temp & 0x7FF) + 1; /* the transferred len is act_len + 1 */
- }
- if (stat) { /* status no ok */
- dev->status = stat;
- return -1;
- }
- temp = swap_32((unsigned long)READ32(&mytd->link));
- mytd = (uhci_td_t *) (temp & 0xfffffff0);
- } while ((temp & 0x1) == 0); /* process all TDs */
- dev->status = stat;
- return 0; /* Ok */
-}
-
-/*-------------------------------------------------------------------
- * LOW LEVEL STUFF
- * assembles QHs und TDs for control, bulk and iso
- *-------------------------------------------------------------------*/
-int dummy(void)
-{
- USB_UHCI_PRINTF("DUMMY\n");
- return 0;
-}
-
-/* Submits a control message. That is a Setup, Data and Status transfer.
- * Routine does not wait for completion.
- */
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup)
-{
- unsigned long destination, status;
- int maxsze = usb_maxpacket(dev, pipe);
- unsigned long dataptr;
- int len;
- int pktsze;
- int i = 0;
-
- if (!maxsze) {
- USB_UHCI_PRINTF
- ("uhci_submit_control_urb: pipesize for pipe %lx is zero\n",
- pipe);
- return -1;
- }
- if (((pipe >> 8) & 0x7f) == rh.devnum) {
- /* this is the root hub -> redirect it */
- return uhci_submit_rh_msg(dev, pipe, buffer, transfer_len,
- setup);
- }
- USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",
- transfer_len, maxsze);
- /* The "pipe" thing contains the destination in bits 8--18 */
- destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */
- /* 3 errors */
- status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
- /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */
- /* Build the TD for the control request, try forever, 8 bytes of data */
- usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, destination | (7 << 21),
- (unsigned long)setup, (unsigned long)dev);
-#ifdef DEBUG_EXTRA
- {
- char *sp = (char *)setup;
- printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe,
- sp[0], sp[1], sp[2], sp[3], sp[4], sp[5], sp[6], sp[7]);
- }
-#endif
- dataptr = (unsigned long)buffer;
- len = transfer_len;
-
- /* If direction is "send", change the frame from SETUP (0x2D)
- to OUT (0xE1). Else change it from SETUP to IN (0x69). */
- destination =
- (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN) ==
- 0 ? USB_PID_OUT : USB_PID_IN);
- while (len > 0) {
- /* data stage */
- pktsze = len;
- i++;
- if (pktsze > maxsze)
- pktsze = maxsze;
- destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */
- usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21), dataptr, (unsigned long)dev); /* Status, pktsze bytes of data */
- tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]);
-
- dataptr += pktsze;
- len -= pktsze;
- }
-
- /* Build the final TD for control status */
- /* It's only IN if the pipe is out AND we aren't expecting data */
-
- destination &= ~UHCI_PID;
- if (((pipe & USB_DIR_IN) == 0) || (transfer_len == 0))
- destination |= USB_PID_IN;
- else
- destination |= USB_PID_OUT;
- destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */
- i++;
- status &= ~TD_CTRL_SPD;
- /* no limit on errors on final packet , 0 bytes of data */
- usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status | TD_CTRL_IOC,
- destination | (UHCI_NULL_DATA_SIZE << 21), 0,
- (unsigned long)dev);
- tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]); /* queue status td */
- /* usb_show_td(i+1); */
- USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n", i);
- /* first mark the control QH element terminated */
- qh_cntrl.element = 0xffffffffL;
- /* set qh active */
- qh_cntrl.dev_ptr = (unsigned long)dev;
- /* fill in tmp_td_chain */
- dummy();
- qh_cntrl.element = swap_32((unsigned long)&tmp_td[0]);
- return 0;
-}
-
-/*-------------------------------------------------------------------
- * Prepare TDs for bulk transfers.
- */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len)
-{
- unsigned long destination, status, info;
- unsigned long dataptr;
- int maxsze = usb_maxpacket(dev, pipe);
- int len;
- int i = 0;
-
- if (transfer_len < 0) {
- printf("Negative transfer length in submit_bulk\n");
- return -1;
- }
- if (!maxsze)
- return -1;
- /* The "pipe" thing contains the destination in bits 8--18. */
- destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid(pipe);
- /* 3 errors */
- status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
- /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */
- /* Build the TDs for the bulk request */
- len = transfer_len;
- dataptr = (unsigned long)buffer;
- do {
- int pktsze = len;
- if (pktsze > maxsze)
- pktsze = maxsze;
- /* pktsze bytes of data */
- info =
- destination | (((pktsze - 1) & UHCI_NULL_DATA_SIZE) << 21) |
- (usb_gettoggle
- (dev, usb_pipeendpoint(pipe),
- usb_pipeout(pipe)) << TD_TOKEN_TOGGLE);
-
- if ((len - pktsze) == 0)
- status |= TD_CTRL_IOC; /* last one generates INT */
-
- usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, info, dataptr, (unsigned long)dev); /* Status, pktsze bytes of data */
- if (i > 0)
- tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]);
- i++;
- dataptr += pktsze;
- len -= pktsze;
- usb_dotoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
- } while (len > 0);
- /* first mark the bulk QH element terminated */
- qh_bulk.element = 0xffffffffL;
- /* set qh active */
- qh_bulk.dev_ptr = (unsigned long)dev;
- /* fill in tmp_td_chain */
- qh_bulk.element = swap_32((unsigned long)&tmp_td[0]);
- return 0;
-}
-
-/* search a free interrupt td
- */
-uhci_td_t *uhci_alloc_int_td(void)
-{
- int i;
- for (i = 0; i < USB_MAX_TEMP_INT_TD; i++) {
- if (tmp_int_td[i].dev_ptr == 0) /* no device assigned -> free TD */
- return &tmp_int_td[i];
- }
- return NULL;
-}
-
-/*-------------------------------------------------------------------
- * submits USB interrupt (ie. polling ;-)
- */
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, int interval)
-{
- int nint, n;
- unsigned long status, destination;
- unsigned long info, tmp;
- uhci_td_t *mytd;
- if (interval < 0 || interval >= 256)
- return -1;
-
- if (interval == 0)
- nint = 0;
- else {
- for (nint = 0, n = 1; nint <= 8; nint++, n += n) { /* round interval down to 2^n */
- if (interval < n) {
- interval = n / 2;
- break;
- }
- }
- nint--;
- }
-
- USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint);
- mytd = uhci_alloc_int_td();
- if (mytd == NULL) {
- printf("No free INT TDs found\n");
- return -1;
- }
- status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27);
-/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27);
-*/
-
- destination =
- (pipe & PIPE_DEVEP_MASK) | usb_packetid(pipe) |
- (((transfer_len - 1) & 0x7ff) << 21);
-
- info =
- destination |
- (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) <<
- TD_TOKEN_TOGGLE);
- tmp = swap_32(td_int[nint].link);
- usb_fill_td(mytd, tmp, status, info, (unsigned long)buffer,
- (unsigned long)dev);
- /* Link it */
- tmp = swap_32((unsigned long)mytd);
- td_int[nint].link = tmp;
-
- usb_dotoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
-
- return 0;
-}
-
-/**********************************************************************
- * Low Level functions
- */
-
-void reset_hc(void)
-{
-
- /* Global reset for 100ms */
- out16r(usb_base_addr + USBPORTSC1, 0x0204);
- out16r(usb_base_addr + USBPORTSC2, 0x0204);
- out16r(usb_base_addr + USBCMD, USBCMD_GRESET | USBCMD_RS);
- /* Turn off all interrupts */
- out16r(usb_base_addr + USBINTR, 0);
- mdelay(50);
- out16r(usb_base_addr + USBCMD, 0);
- mdelay(10);
-}
-
-void start_hc(void)
-{
- int timeout = 1000;
-
- while (in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) {
- if (!--timeout) {
- printf("USBCMD_HCRESET timed out!\n");
- break;
- }
- }
- /* Turn on all interrupts */
- out16r(usb_base_addr + USBINTR,
- USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP);
- /* Start at frame 0 */
- out16r(usb_base_addr + USBFRNUM, 0);
- /* set Framebuffer base address */
- out32r(usb_base_addr + USBFLBASEADD, (unsigned long)&framelist);
- /* Run and mark it configured with a 64-byte max packet */
- out16r(usb_base_addr + USBCMD, USBCMD_RS | USBCMD_CF | USBCMD_MAXP);
-}
-
-/* Initialize the skeleton
- */
-void usb_init_skel(void)
-{
- unsigned long temp;
- int n;
-
- for (n = 0; n < USB_MAX_TEMP_INT_TD; n++)
- tmp_int_td[n].dev_ptr = 0L; /* no devices connected */
- /* last td */
- usb_fill_td(&td_last, UHCI_PTR_TERM, TD_CTRL_IOC, USB_PID_OUT, 0, 0L);
- /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */
- /* End Queue Header */
- usb_fill_qh(&qh_end, UHCI_PTR_TERM, (unsigned long)&td_last);
- /* Bulk Queue Header */
- temp = (unsigned long)&qh_end;
- usb_fill_qh(&qh_bulk, temp | UHCI_PTR_QH, UHCI_PTR_TERM);
- /* Control Queue Header */
- temp = (unsigned long)&qh_bulk;
- usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH, UHCI_PTR_TERM);
- /* 1ms Interrupt td */
- temp = (unsigned long)&qh_cntrl;
- usb_fill_td(&td_int[0], temp | UHCI_PTR_QH, 0, USB_PID_OUT, 0, 0L);
- temp = (unsigned long)&td_int[0];
- for (n = 1; n < 8; n++)
- usb_fill_td(&td_int[n], temp, 0, USB_PID_OUT, 0, 0L);
- for (n = 0; n < 1024; n++) {
- /* link all framelist pointers to one of the interrupts */
- int m, o;
- if ((n & 127) == 127)
- framelist[n] = swap_32((unsigned long)&td_int[0]);
- else
- for (o = 1, m = 2; m <= 128; o++, m += m)
- if ((n & (m - 1)) == ((m - 1) / 2))
- framelist[n] =
- swap_32((unsigned long)&td_int[o]);
-
- }
-}
-
-/* check the common skeleton for completed transfers, and update the status
- * of the "connected" device. Called from the IRQ routine.
- */
-void usb_check_skel(void)
-{
- struct usb_device *dev;
- /* start with the control qh */
- if (qh_cntrl.dev_ptr != 0) { /* it's a device assigned check if this caused IRQ */
- dev = (struct usb_device *)qh_cntrl.dev_ptr;
- /* Flush cache now that hardware updated DATA and TDs/QHs */
- if (!gd->arch.snooping_avail)
- sparc_dcache_flush_all();
- usb_get_td_status(&tmp_td[0], dev); /* update status */
- if (!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
- qh_cntrl.dev_ptr = 0;
- }
- }
- /* now process the bulk */
- if (qh_bulk.dev_ptr != 0) { /* it's a device assigned check if this caused IRQ */
- dev = (struct usb_device *)qh_bulk.dev_ptr;
- /* Flush cache now that hardware updated DATA and TDs/QHs */
- if (!gd->arch.snooping_avail)
- sparc_dcache_flush_all();
- usb_get_td_status(&tmp_td[0], dev); /* update status */
- if (!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
- qh_bulk.dev_ptr = 0;
- }
- }
-}
-
-/* check the interrupt chain, ubdate the status of the appropriate device,
- * call the appropriate irqhandler and reactivate the TD if the irqhandler
- * returns with 1
- */
-void usb_check_int_chain(void)
-{
- int i, res;
- unsigned long link, status;
- struct usb_device *dev;
- uhci_td_t *td, *prevtd;
-
- for (i = 0; i < 8; i++) {
- prevtd = &td_int[i]; /* the first previous td is the skeleton td */
- link = swap_32(READ32(&td_int[i].link)) & 0xfffffff0; /* next in chain */
- td = (uhci_td_t *) link; /* assign it */
- /* all interrupt TDs are finally linked to the td_int[0].
- * so we process all until we find the td_int[0].
- * if int0 chain points to a QH, we're also done
- */
- while (((i > 0) && (link != (unsigned long)&td_int[0])) ||
- ((i == 0)
- && !(swap_32(READ32(&td->link)) & UHCI_PTR_QH))) {
- /* check if a device is assigned with this td */
- status = swap_32(READ32(&td->status));
- if ((td->dev_ptr != 0L) && !(status & TD_CTRL_ACTIVE)) {
- /* td is not active and a device is assigned -> call irqhandler */
- dev = (struct usb_device *)td->dev_ptr;
- dev->irq_act_len = ((status & 0x7FF) == 0x7FF) ? 0 : (status & 0x7FF) + 1; /* transferred length */
- dev->irq_status = usb_uhci_td_stat(status); /* get status */
- res = dev->irq_handle(dev); /* call irqhandler */
- if (res == 1) {
- /* reactivate */
- status |= TD_CTRL_ACTIVE;
- td->status = swap_32(status);
- prevtd = td; /* previous td = this td */
- } else {
- prevtd->link = READ32(&td->link); /* link previous td directly to the nex td -> unlinked */
- /* remove device pointer */
- td->dev_ptr = 0L;
- }
- } /* if we call the irq handler */
- link = swap_32(READ32(&td->link)) & 0xfffffff0; /* next in chain */
- td = (uhci_td_t *) link; /* assign it */
- } /* process all td in this int chain */
- } /* next interrupt chain */
-}
-
-/* usb interrupt service routine.
- */
-void handle_usb_interrupt(void)
-{
- unsigned short status;
- static int error = 0;
-
- /*
- * Read the interrupt status, and write it back to clear the
- * interrupt cause
- */
-
- status = in16r(usb_base_addr + USBSTS);
-
- if (!status) /* shared interrupt, not mine */
- return;
- if (status != 1) {
- /* remove host controller halted state */
- if ((status & (USBSTS_HCPE | USBSTS_HCH)) ==
- (USBSTS_HCPE | USBSTS_HCH)) {
- /* Stop due to bug in driver, or hardware */
- out16r(usb_base_addr + USBSTS, status);
- out16r(usb_base_addr + USBCMD,
- USBCMD_HCRESET | USBCMD_GRESET);
- printf
- ("GRUSB: HW detected error(s) in USB Descriptors (STS: 0x%x)\n",
- status);
- usb_show_td(8);
- return;
- } else if ((status & 0x20)
- && ((in16r(usb_base_addr + USBCMD) & USBCMD_RS) ==
- 0)) {
- if (error < 10) {
- out16r(usb_base_addr + USBCMD,
- USBCMD_RS | in16r(usb_base_addr +
- USBCMD));
- error++;
- }
- } else
- error = 0;
- }
- usb_check_int_chain(); /* call interrupt handlers for int tds */
- usb_check_skel(); /* call completion handler for common transfer routines */
- out16r(usb_base_addr + USBSTS, status);
-}
-
-/* init uhci
- */
-int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
-{
- ambapp_ahbdev ahbdev;
-
- /* Find GRUSB core using AMBA Plug&Play information */
- if (ambapp_ahbslv_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_UHCI,
- CONFIG_SYS_GRLIB_GRUSB_INDEX, &ahbdev) != 1) {
- printf("USB UHCI: Failed to find GRUSB controller\n");
- return -1;
- }
- usb_base_addr = ahbdev.address[0];
- grusb_irq = ahbdev.irq;
- /*
- usb_base_addr = 0xfffa0000;
- grusb_irq = 10;
- */
-#ifdef USB_UHCI_DEBUG
- grusb_show_regs();
-#endif
- memset(td_int, 0, sizeof(td_int));
- memset(tmp_td, 0, sizeof(tmp_td));
- memset(tmp_int_td, 0, sizeof(tmp_int_td));
- memset(&qh_cntrl, 0, sizeof(qh_cntrl));
- memset(&qh_end, 0, sizeof(qh_end));
- memset(&td_last, 0, sizeof(td_last));
-
- irq_free_handler(grusb_irq);
- USB_UHCI_PRINTF("GRUSB: at 0x%lx irq %d\n", usb_base_addr, grusb_irq);
- rh.devnum = 0;
- usb_init_skel();
- reset_hc();
- start_hc();
- irq_install_handler(grusb_irq,
- (interrupt_handler_t *) handle_usb_interrupt, NULL);
- return 0;
-}
-
-/* stop uhci
- */
-int usb_lowlevel_stop(int index)
-{
- if (grusb_irq == -1)
- return 1;
- irq_free_handler(grusb_irq);
- reset_hc();
- grusb_irq = -1;
- return 0;
-}
-
-/*******************************************************************************************
- * Virtual Root Hub
- * Since the uhci does not have a real HUB, we simulate one ;-)
- */
-#undef USB_RH_DEBUG
-
-#ifdef USB_RH_DEBUG
-#define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args)
-static void usb_display_wValue(unsigned short wValue, unsigned short wIndex);
-static void usb_display_Req(unsigned short req);
-#else
-#define USB_RH_PRINTF(fmt,args...)
-static void usb_display_wValue(unsigned short wValue, unsigned short wIndex)
-{
-}
-static void usb_display_Req(unsigned short req)
-{
-}
-#endif
-
-#define WANT_USB_ROOT_HUB_HUB_DES
-#include <usbroothubdes.h>
-#undef WANT_USB_ROOT_HUB_HUB_DES
-
-/*
- * Root Hub Control Pipe (interrupt Pipes are not supported)
- */
-
-int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *cmd)
-{
- void *data = buffer;
- int leni = transfer_len;
- int len = 0;
- int status = 0;
- int stat = 0;
- int i;
-
- unsigned short cstatus;
-
- unsigned short bmRType_bReq;
- unsigned short wValue;
- unsigned short wIndex;
- unsigned short wLength;
-
- if (usb_pipeint(pipe)) {
- printf("Root-Hub submit IRQ: NOT implemented\n");
- return 0;
- }
- bmRType_bReq = cmd->requesttype | cmd->request << 8;
- wValue = swap_16(cmd->value);
- wIndex = swap_16(cmd->index);
- wLength = swap_16(cmd->length);
- usb_display_Req(bmRType_bReq);
- for (i = 0; i < 8; i++)
- rh.c_p_r[i] = 0;
- USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n",
- dev->devnum, 8, cmd->requesttype, cmd->request, wValue,
- wIndex, wLength);
-
- switch (bmRType_bReq) {
- /* Request Destination:
- without flags: Device,
- RH_INTERFACE: interface,
- RH_ENDPOINT: endpoint,
- RH_CLASS means HUB here,
- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
- */
-
- case RH_GET_STATUS:
- *(unsigned short *)data = swap_16(1);
- len = 2;
- break;
- case RH_GET_STATUS | RH_INTERFACE:
- *(unsigned short *)data = swap_16(0);
- len = 2;
- break;
- case RH_GET_STATUS | RH_ENDPOINT:
- *(unsigned short *)data = swap_16(0);
- len = 2;
- break;
- case RH_GET_STATUS | RH_CLASS:
- *(unsigned long *)data = swap_32(0);
- len = 4;
- break; /* hub power ** */
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-
- status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1));
- cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) |
- ((status & USBPORTSC_PEC) >> (3 - 1)) |
- (rh.c_p_r[wIndex - 1] << (0 + 4));
- status = (status & USBPORTSC_CCS) | ((status & USBPORTSC_PE) >> (2 - 1)) | ((status & USBPORTSC_SUSP) >> (12 - 2)) | ((status & USBPORTSC_PR) >> (9 - 4)) | (1 << 8) | /* power on ** */
- ((status & USBPORTSC_LSDA) << (-8 + 9));
-
- *(unsigned short *)data = swap_16(status);
- *(unsigned short *)(data + 2) = swap_16(cstatus);
- len = 4;
- break;
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- switch (wValue) {
- case (RH_ENDPOINT_STALL):
- len = 0;
- break;
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- switch (wValue) {
- case (RH_C_HUB_OVER_CURRENT):
- len = 0; /* hub power over current ** */
- break;
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- usb_display_wValue(wValue, wIndex);
- switch (wValue) {
- case (RH_PORT_ENABLE):
- status =
- in16r(usb_base_addr + USBPORTSC1 +
- 2 * (wIndex - 1));
- status = (status & 0xfff5) & ~USBPORTSC_PE;
- out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
- status);
- len = 0;
- break;
- case (RH_PORT_SUSPEND):
- status =
- in16r(usb_base_addr + USBPORTSC1 +
- 2 * (wIndex - 1));
- status = (status & 0xfff5) & ~USBPORTSC_SUSP;
- out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
- status);
- len = 0;
- break;
- case (RH_PORT_POWER):
- len = 0; /* port power ** */
- break;
- case (RH_C_PORT_CONNECTION):
- status =
- in16r(usb_base_addr + USBPORTSC1 +
- 2 * (wIndex - 1));
- status = (status & 0xfff5) | USBPORTSC_CSC;
- out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
- status);
- len = 0;
- break;
- case (RH_C_PORT_ENABLE):
- status =
- in16r(usb_base_addr + USBPORTSC1 +
- 2 * (wIndex - 1));
- status = (status & 0xfff5) | USBPORTSC_PEC;
- out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
- status);
- len = 0;
- break;
- case (RH_C_PORT_SUSPEND):
-/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
- len = 0;
- break;
- case (RH_C_PORT_OVER_CURRENT):
- len = 0;
- break;
- case (RH_C_PORT_RESET):
- rh.c_p_r[wIndex - 1] = 0;
- len = 0;
- break;
- }
- break;
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- usb_display_wValue(wValue, wIndex);
- switch (wValue) {
- case (RH_PORT_SUSPEND):
- status =
- in16r(usb_base_addr + USBPORTSC1 +
- 2 * (wIndex - 1));
- status = (status & 0xfff5) | USBPORTSC_SUSP;
- out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
- status);
- len = 0;
- break;
- case (RH_PORT_RESET):
- status =
- in16r(usb_base_addr + USBPORTSC1 +
- 2 * (wIndex - 1));
- status = (status & 0xfff5) | USBPORTSC_PR;
- out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
- status);
- mdelay(10);
- status = (status & 0xfff5) & ~USBPORTSC_PR;
- out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
- status);
- udelay(10);
- status = (status & 0xfff5) | USBPORTSC_PE;
- out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
- status);
- mdelay(10);
- status = (status & 0xfff5) | 0xa;
- out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
- status);
- len = 0;
- break;
- case (RH_PORT_POWER):
- len = 0; /* port power ** */
- break;
- case (RH_PORT_ENABLE):
- status =
- in16r(usb_base_addr + USBPORTSC1 +
- 2 * (wIndex - 1));
- status = (status & 0xfff5) | USBPORTSC_PE;
- out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
- status);
- len = 0;
- break;
- }
- break;
-
- case RH_SET_ADDRESS:
- rh.devnum = wValue;
- len = 0;
- break;
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case (0x01): /* device descriptor */
- i = sizeof(root_hub_config_des);
- status = i > wLength ? wLength : i;
- len = leni > status ? status : leni;
- memcpy(data, root_hub_dev_des, len);
- break;
- case (0x02): /* configuration descriptor */
- i = sizeof(root_hub_config_des);
- status = i > wLength ? wLength : i;
- len = leni > status ? status : leni;
- memcpy(data, root_hub_config_des, len);
- break;
- case (0x03): /*string descriptors */
- if (wValue == 0x0300) {
- i = sizeof(root_hub_str_index0);
- status = i > wLength ? wLength : i;
- len = leni > status ? status : leni;
- memcpy(data, root_hub_str_index0, len);
- break;
- }
- if (wValue == 0x0301) {
- i = sizeof(root_hub_str_index1);
- status = i > wLength ? wLength : i;
- len = leni > status ? status : leni;
- memcpy(data, root_hub_str_index1, len);
- break;
- }
- stat = USB_ST_STALLED;
- }
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- root_hub_hub_des[2] = 2;
- i = sizeof(root_hub_hub_des);
- status = i > wLength ? wLength : i;
- len = leni > status ? status : leni;
- memcpy(data, root_hub_hub_des, len);
- break;
- case RH_GET_CONFIGURATION:
- *(unsigned char *)data = 0x01;
- len = 1;
- break;
- case RH_SET_CONFIGURATION:
- len = 0;
- break;
- default:
- stat = USB_ST_STALLED;
- }
- USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n", stat,
- in16r(usb_base_addr + USBPORTSC1),
- in16r(usb_base_addr + USBPORTSC2));
- dev->act_len = len;
- dev->status = stat;
- return stat;
-
-}
-
-/********************************************************************************
- * Some Debug Routines
- */
-
-#ifdef USB_RH_DEBUG
-
-static void usb_display_Req(unsigned short req)
-{
- USB_RH_PRINTF("- Root-Hub Request: ");
- switch (req) {
- case RH_GET_STATUS:
- USB_RH_PRINTF("Get Status ");
- break;
- case RH_GET_STATUS | RH_INTERFACE:
- USB_RH_PRINTF("Get Status Interface ");
- break;
- case RH_GET_STATUS | RH_ENDPOINT:
- USB_RH_PRINTF("Get Status Endpoint ");
- break;
- case RH_GET_STATUS | RH_CLASS:
- USB_RH_PRINTF("Get Status Class");
- break; /* hub power ** */
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- USB_RH_PRINTF("Get Status Class Others");
- break;
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- USB_RH_PRINTF("Clear Feature Endpoint ");
- break;
- case RH_CLEAR_FEATURE | RH_CLASS:
- USB_RH_PRINTF("Clear Feature Class ");
- break;
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- USB_RH_PRINTF("Clear Feature Other Class ");
- break;
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- USB_RH_PRINTF("Set Feature Other Class ");
- break;
- case RH_SET_ADDRESS:
- USB_RH_PRINTF("Set Address ");
- break;
- case RH_GET_DESCRIPTOR:
- USB_RH_PRINTF("Get Descriptor ");
- break;
- case RH_GET_DESCRIPTOR | RH_CLASS:
- USB_RH_PRINTF("Get Descriptor Class ");
- break;
- case RH_GET_CONFIGURATION:
- USB_RH_PRINTF("Get Configuration ");
- break;
- case RH_SET_CONFIGURATION:
- USB_RH_PRINTF("Get Configuration ");
- break;
- default:
- USB_RH_PRINTF("****UNKNOWN**** 0x%04X ", req);
- }
- USB_RH_PRINTF("\n");
-
-}
-
-static void usb_display_wValue(unsigned short wValue, unsigned short wIndex)
-{
- switch (wValue) {
- case (RH_PORT_ENABLE):
- USB_RH_PRINTF("Root-Hub: Enable Port %d\n", wIndex);
- break;
- case (RH_PORT_SUSPEND):
- USB_RH_PRINTF("Root-Hub: Suspend Port %d\n", wIndex);
- break;
- case (RH_PORT_POWER):
- USB_RH_PRINTF("Root-Hub: Port Power %d\n", wIndex);
- break;
- case (RH_C_PORT_CONNECTION):
- USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n", wIndex);
- break;
- case (RH_C_PORT_ENABLE):
- USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n", wIndex);
- break;
- case (RH_C_PORT_SUSPEND):
- USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n", wIndex);
- break;
- case (RH_C_PORT_OVER_CURRENT):
- USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",
- wIndex);
- break;
- case (RH_C_PORT_RESET):
- USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n", wIndex);
- break;
- default:
- USB_RH_PRINTF("Root-Hub: unknown %x %x\n", wValue, wIndex);
- break;
- }
-}
-
-#endif
-
-/*#ifdef USB_UHCI_DEBUG*/
-
-static int usb_display_td(uhci_td_t * td)
-{
- unsigned long tmp;
- int valid;
-
- printf("TD at %p:\n", td);
-
- tmp = swap_32(READ32(&td->link));
- printf("Link points to 0x%08lX, %s first, %s, %s\n", tmp & 0xfffffff0,
- ((tmp & 0x4) == 0x4) ? "Depth" : "Breath",
- ((tmp & 0x2) == 0x2) ? "QH" : "TD",
- ((tmp & 0x1) == 0x1) ? "invalid" : "valid");
- valid = ((tmp & 0x1) == 0x0);
- tmp = swap_32(READ32(&td->status));
- printf
- (" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n",
- (((tmp >> 29) & 0x1) == 0x1) ? "SPD Enable" : "SPD Disable",
- ((tmp >> 28) & 0x3),
- (((tmp >> 26) & 0x1) == 0x1) ? "Low Speed" : "Full Speed",
- (((tmp >> 25) & 0x1) == 0x1) ? "ISO " : "",
- (((tmp >> 24) & 0x1) == 0x1) ? "IOC " : "",
- (((tmp >> 23) & 0x1) == 0x1) ? "Active " : "Inactive ",
- (((tmp >> 22) & 0x1) == 0x1) ? "Stalled" : "",
- (((tmp >> 21) & 0x1) == 0x1) ? "Data Buffer Error" : "",
- (((tmp >> 20) & 0x1) == 0x1) ? "Babble" : "",
- (((tmp >> 19) & 0x1) == 0x1) ? "NAK" : "",
- (((tmp >> 18) & 0x1) == 0x1) ? "Bitstuff Error" : "",
- (tmp & 0x7ff));
- tmp = swap_32(READ32(&td->info));
- printf(" MaxLen 0x%lX\n", ((tmp >> 21) & 0x7FF));
- printf(" %sEndpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",
- ((tmp >> 19) & 0x1) == 0x1 ? "TOGGLE " : "", ((tmp >> 15) & 0xF),
- ((tmp >> 8) & 0x7F), tmp & 0xFF);
- tmp = swap_32(READ32(&td->buffer));
- printf(" Buffer 0x%08lX\n", tmp);
- printf(" DEV %08lX\n", td->dev_ptr);
- return valid;
-}
-
-void usb_show_td(int max)
-{
- int i;
- if (max > 0) {
- for (i = 0; i < max; i++) {
- usb_display_td(&tmp_td[i]);
- }
- } else {
- i = 0;
- do {
- printf("tmp_td[%d]\n", i);
- } while (usb_display_td(&tmp_td[i++]));
- }
-}
-
-void grusb_show_regs(void)
-{
- unsigned int tmp;
-
- tmp = in16r(usb_base_addr + USBCMD);
- printf(" USBCMD: 0x%04x\n", tmp);
- tmp = in16r(usb_base_addr + USBSTS);
- printf(" USBSTS: 0x%04x\n", tmp);
- tmp = in16r(usb_base_addr + USBINTR);
- printf(" USBINTR: 0x%04x\n", tmp);
- tmp = in16r(usb_base_addr + USBFRNUM);
- printf(" FRNUM: 0x%04x\n", tmp);
- tmp = in32r(usb_base_addr + USBFLBASEADD);
- printf(" FLBASEADD: 0x%08x\n", tmp);
- tmp = in16r(usb_base_addr + USBSOF);
- printf(" SOFMOD: 0x%04x\n", tmp);
- tmp = in16r(usb_base_addr + USBPORTSC1);
- printf(" PORTSC1: 0x%04x\n", tmp);
-}
-
-/*#endif*/
-#endif /* CONFIG_USB_UHCI */
-
-/* EOF */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Note: Part of this code has been derived from linux
- */
-#ifndef _USB_UHCI_H_
-#define _USB_UHCI_H_
-
-/* Command register */
-#define USBCMD 0
-#define USBCMD_RS 0x0001 /* Run/Stop */
-#define USBCMD_HCRESET 0x0002 /* Host reset */
-#define USBCMD_GRESET 0x0004 /* Global reset */
-#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */
-#define USBCMD_FGR 0x0010 /* Force Global Resume */
-#define USBCMD_SWDBG 0x0020 /* SW Debug mode */
-#define USBCMD_CF 0x0040 /* Config Flag (sw only) */
-#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */
-
-/* Status register */
-#define USBSTS 2
-#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */
-#define USBSTS_ERROR 0x0002 /* Interrupt due to error */
-#define USBSTS_RD 0x0004 /* Resume Detect */
-#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */
-#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */
-#define USBSTS_HCH 0x0020 /* HC Halted */
-
-/* Interrupt enable register */
-#define USBINTR 4
-#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */
-#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */
-#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */
-#define USBINTR_SP 0x0008 /* Short packet interrupt enable */
-
-#define USBFRNUM 6
-#define USBFLBASEADD 8
-#define USBSOF 12
-
-/* USB port status and control registers */
-#define USBPORTSC1 16
-#define USBPORTSC2 18
-#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */
-#define USBPORTSC_CSC 0x0002 /* Connect Status Change */
-#define USBPORTSC_PE 0x0004 /* Port Enable */
-#define USBPORTSC_PEC 0x0008 /* Port Enable Change */
-#define USBPORTSC_LS 0x0030 /* Line Status */
-#define USBPORTSC_RD 0x0040 /* Resume Detect */
-#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */
-#define USBPORTSC_PR 0x0200 /* Port Reset */
-#define USBPORTSC_SUSP 0x1000 /* Suspend */
-
-/* Legacy support register */
-#define USBLEGSUP 0xc0
-#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
-
-#define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */
-#define UHCI_PID 0xff /* PID MASK */
-
-#define UHCI_PTR_BITS 0x000F
-#define UHCI_PTR_TERM 0x0001
-#define UHCI_PTR_QH 0x0002
-#define UHCI_PTR_DEPTH 0x0004
-
-/* for TD <status>: */
-#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */
-#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */
-#define TD_CTRL_LS (1 << 26) /* Low Speed Device */
-#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */
-#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */
-#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */
-#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */
-#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */
-#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */
-#define TD_CTRL_NAK (1 << 19) /* NAK Received */
-#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */
-#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */
-#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */
-
-#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
- TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
-
-#define TD_TOKEN_TOGGLE 19
-
-/* ------------------------------------------------------------------------------------
- Virtual Root HUB
- ------------------------------------------------------------------------------------ */
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-/* Our Vendor Specific feature */
-#define RH_REMOVE_EP 0x00
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-/* Transfer descriptor structure */
-typedef struct {
- unsigned long link; /* next td/qh (LE) */
- unsigned long status; /* status of the td */
- unsigned long info; /* Max Lenght / Endpoint / device address and PID */
- unsigned long buffer; /* pointer to data buffer (LE) */
- unsigned long dev_ptr; /* pointer to the assigned device (BE) */
- unsigned long res[3]; /* reserved (TDs must be 8Byte aligned) */
-} uhci_td_t, *puhci_td_t;
-
-/* Queue Header structure */
-typedef struct {
- unsigned long head; /* Next QH (LE) */
- unsigned long element; /* Queue element pointer (LE) */
- unsigned long res[5]; /* reserved */
- unsigned long dev_ptr; /* if 0 no tds have been assigned to this qh */
-} uhci_qh_t, *puhci_qh_t;
-
-struct virt_root_hub {
- int devnum; /* Address of Root Hub endpoint */
- int numports; /* number of ports */
- int c_p_r[8]; /* C_PORT_RESET */
-};
-
-#endif /* _USB_UHCI_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2007-2008
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_FORMAT("elf32-sparc", "elf32-sparc", "elf32-sparc")
-OUTPUT_ARCH(sparc)
-ENTRY(_start)
-SECTIONS
-{
-
-/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
-
- .text : {
- _load_addr = .;
- _text = .;
-
- *(.start)
- */start.o (.text)
-/* 8k is the same as the PROM offset from end of main memory, (CONFIG_SYS_PROM_SIZE) */
- . = ALIGN(8192);
-/* PROM CODE, Will be relocated to the end of memory,
- * no global data accesses please.
- */
- __prom_start = .;
- *(.prom.pgt)
- *(.prom.data)
- *(.prom.text)
- . = ALIGN(16);
- __prom_end = .;
- *(.text)
- *(.fixup)
- *(.gnu.warning)
-/* *(.got1)*/
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- . = ALIGN(4);
- _etext = .;
-
- /* CMD Table */
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.data.rel)
- *(.data.rel.*)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = ALIGN(4);
- __got_start = .;
- .got : {
- *(.got)
-/* *(.data.rel)
- *(.data.rel.local)*/
- . = ALIGN(16);
- }
- __got_end = .;
-
-/* .data.rel : { } */
-
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(16); /* to speed clearing of bss up */
- }
- __bss_end = . ;
- __bss_end = . ;
- PROVIDE (end = .);
-
-/* Relocated into main memory */
-
- /* Start of main memory */
- /*. = 0x40000000;*/
-
- .stack (NOLOAD) : { *(.stack) }
-
- /* PROM CODE */
-
- /* global data in RAM passed to kernel after booting */
-
-
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
-
-}
+++ /dev/null
-/* asi.h: Address Space Identifier values for the LEON2 sparc.
- *
- * Copyright (C) 2008 Daniel Hellstrom (daniel@gaisler.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _LEON2_ASI_H
-#define _LEON2_ASI_H
-
-#define ASI_CACHEMISS 0x01 /* Force D-Cache miss on load (lda) */
-#define ASI_M_FLUSH_PROBE 0x03 /* MMU Flush/Probe */
-#define ASI_IFLUSH 0x05 /* Flush I-Cache */
-#define ASI_DFLUSH 0x06 /* Flush D-Cache */
-#define ASI_BYPASS 0x1c /* Bypass MMU (Physical address) */
-#define ASI_MMUFLUSH 0x18 /* FLUSH TLB */
-#define ASI_M_MMUREGS 0x19 /* READ/Write MMU Registers */
-
-#endif /* _LEON2_ASI_H */
+++ /dev/null
-/* asi.h: Address Space Identifier values for the LEON3 sparc.
- *
- * Copyright (C) 2008 Daniel Hellstrom (daniel@gaisler.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _LEON3_ASI_H
-#define _LEON3_ASI_H
-
-#define ASI_CACHEMISS 0x01 /* Force D-Cache miss on load (lda) */
-#define ASI_M_FLUSH_PROBE 0x03 /* MMU Flush/Probe */
-#define ASI_IFLUSH 0x10 /* Flush I-Cache */
-#define ASI_DFLUSH 0x11 /* Flush D-Cache */
-#define ASI_BYPASS 0x1c /* Bypass MMU (Physical address) */
-#define ASI_MMUFLUSH 0x18 /* FLUSH TLB */
-#define ASI_M_MMUREGS 0x19 /* READ/Write MMU Registers */
-
-#endif /* _LEON3_ASI_H */
+++ /dev/null
-/* Address Space Identifier (ASI) values for sparc processors.
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SPARC_ASI_H
-#define _SPARC_ASI_H
-
-/* ASI numbers are processor implementation specific */
-#include <asm/arch/asi.h>
-
-#endif /* _SPARC_ASI_H */
+++ /dev/null
-/* Assembler macros for SPARC
- *
- * (C) Copyright 2007, taken from linux asm-sparc/asmmacro.h
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_ASMMACRO_H__
-#define __SPARC_ASMMACRO_H__
-
-#include <config.h>
-
-/* All trap entry points _must_ begin with this macro or else you
- * lose. It makes sure the kernel has a proper window so that
- * c-code can be called.
- */
-#define SAVE_ALL_HEAD \
- sethi %hi(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)), %l4; \
- jmpl %l4 + %lo(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)), %l6;
-#define SAVE_ALL \
- SAVE_ALL_HEAD \
- nop;
-
-/* All traps low-level code here must end with this macro. */
-#define RESTORE_ALL b ret_trap_entry; clr %l6;
-
-#endif
+++ /dev/null
-/* SPARC atomic operations
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _ASM_SPARC_ATOMIC_H_
-#define _ASM_SPARC_ATOMIC_H_
-
-#endif /* _ASM_SPARC_ATOMIC_H_ */
+++ /dev/null
-/* Bit string operations on the SPARC
- *
- * (C) Copyright 2007, taken from asm-ppc/bitops.h
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SPARC_BITOPS_H
-#define _SPARC_BITOPS_H
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/__ffs.h>
-
-#endif /* _SPARC_BITOPS_H */
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SPARC_BYTEORDER_H
-#define _SPARC_BYTEORDER_H
-
-#include <asm/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-#define __BYTEORDER_HAS_U64__
-#define __SWAB_64_THRU_32__
-#endif
-#include <linux/byteorder/big_endian.h>
-#endif /* _SPARC_BYTEORDER_H */
+++ /dev/null
-/*
- * (C) Copyright 2008,
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_CACHE_H__
-#define __SPARC_CACHE_H__
-
-#include <asm/processor.h>
-
-/*
- * If CONFIG_SYS_CACHELINE_SIZE is defined use it for DMA alignment. Otherwise
- * use 32-bytes, the cacheline size for Sparc.
- */
-#ifdef CONFIG_SYS_CACHELINE_SIZE
-#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE
-#else
-#define ARCH_DMA_MINALIGN 32
-#endif
-
-#endif
+++ /dev/null
-/*
- * Copyright 2015,
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _ASM_CONFIG_H_
-#define _ASM_CONFIG_H_
-
-#define CONFIG_SYS_GENERIC_GLOBAL_DATA
-#define CONFIG_NEEDS_MANUAL_RELOC
-
-#define CONFIG_LMB
-#define CONFIG_SYS_BOOT_RAMDISK_HIGH
-
-#define CONFIG_SYS_TIMER_RATE 1000000 /* 1MHz */
-#define CONFIG_SYS_TIMER_COUNTER gd->arch.timer
-#define CONFIG_SYS_TIMER_COUNTS_DOWN
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham, Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_GBL_DATA_H
-#define __ASM_GBL_DATA_H
-
-#include "asm/types.h"
-
-/* Architecture-specific global data */
-struct arch_global_data {
- void *timer;
- void *uart;
- unsigned int uart_freq;
-#ifdef CONFIG_LEON3
- unsigned int snooping_available;
-#endif
-};
-
-#include <asm-generic/global_data.h>
-
-#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("%g7")
-
-#endif /* __ASM_GBL_DATA_H */
+++ /dev/null
-/* SPARC I/O definitions
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SPARC_IO_H
-#define _SPARC_IO_H
-
-/* Nothing to sync, total store ordering (TSO)... */
-#define sync()
-
-/*
- * Generic virtual read/write.
- */
-
-#ifndef CONFIG_SYS_HAS_NO_CACHE
-
-/* Forces a cache miss on read/load.
- * On some architectures we need to bypass the cache when reading
- * I/O registers so that we are not reading the same status word
- * over and over again resulting in a hang (until an IRQ if lucky)
- */
-
-#define __arch_getb(a) SPARC_NOCACHE_READ_BYTE((unsigned int)(a))
-#define __arch_getw(a) SPARC_NOCACHE_READ_HWORD((unsigned int)(a))
-#define __arch_getl(a) SPARC_NOCACHE_READ((unsigned int)(a))
-#define __arch_getq(a) SPARC_NOCACHE_READ_DWORD((unsigned int)(a))
-
-#else
-
-#define __arch_getb(a) (*(volatile unsigned char *)(a))
-#define __arch_getw(a) (*(volatile unsigned short *)(a))
-#define __arch_getl(a) (*(volatile unsigned int *)(a))
-#define __arch_getq(a) (*(volatile unsigned long long *)(a))
-
-#endif /* CONFIG_SYS_HAS_NO_CACHE */
-
-#define __arch_putb(v, a) (*(volatile unsigned char *)(a) = (v))
-#define __arch_putw(v, a) (*(volatile unsigned short *)(a) = (v))
-#define __arch_putl(v, a) (*(volatile unsigned int *)(a) = (v))
-#define __arch_putq(v, a) (*(volatile unsigned long long *)(a) = (v))
-
-#define __raw_writeb(v, a) __arch_putb(v, a)
-#define __raw_writew(v, a) __arch_putw(v, a)
-#define __raw_writel(v, a) __arch_putl(v, a)
-#define __raw_writeq(v, a) __arch_putq(v, a)
-
-#define __raw_readb(a) __arch_getb(a)
-#define __raw_readw(a) __arch_getw(a)
-#define __raw_readl(a) __arch_getl(a)
-#define __raw_readq(a) __arch_getq(a)
-
-#define writeb __raw_writeb
-#define writew __raw_writew
-#define writel __raw_writel
-#define writeq __raw_writeq
-
-#define readb __raw_readb
-#define readw __raw_readw
-#define readl __raw_readl
-#define readq __raw_readq
-
-/*
- * Given a physical address and a length, return a virtual address
- * that can be used to access the memory range with the caching
- * properties specified by "flags".
- */
-
-#define MAP_NOCACHE (0)
-#define MAP_WRCOMBINE (0)
-#define MAP_WRBACK (0)
-#define MAP_WRTHROUGH (0)
-
-static inline void *map_physmem(phys_addr_t paddr, unsigned long len,
- unsigned long flags)
-{
- return (void *)paddr;
-}
-
-/*
- * Take down a mapping set up by map_physmem().
- */
-static inline void unmap_physmem(void *vaddr, unsigned long flags)
-{
-
-}
-
-static inline phys_addr_t virt_to_phys(void * vaddr)
-{
- return (phys_addr_t)(vaddr);
-}
-
-#endif
+++ /dev/null
-/* IRQ functions
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_IRQ_H__
-#define __SPARC_IRQ_H__
-
-#include <asm/psr.h>
-
-/* Set SPARC Processor Interrupt Level */
-static inline void set_pil(unsigned int level)
-{
- unsigned int psr = get_psr();
-
- put_psr((psr & ~PSR_PIL) | ((level & 0xf) << PSR_PIL_OFS));
-}
-
-/* Get SPARC Processor Interrupt Level */
-static inline unsigned int get_pil(void)
-{
- unsigned int psr = get_psr();
- return (psr & PSR_PIL) >> PSR_PIL_OFS;
-}
-
-/* Disables interrupts and return current PIL value */
-extern int intLock(void);
-
-/* Sets the PIL to oldLevel */
-extern void intUnlock(int oldLevel);
-
-/* Return non-zero if interrupts are currently enabled */
-extern int interrupt_is_enabled(void);
-
-#endif
+++ /dev/null
-/* LEON Header File select
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_LEON_H__
-#define __ASM_LEON_H__
-
-#if defined(CONFIG_LEON3)
-
-#include <asm/leon3.h>
-
-#elif defined(CONFIG_LEON2)
-
-#include <asm/leon2.h>
-
-#else
-
-#error Unknown LEON processor
-
-#endif
-
-/* Common stuff */
-
-#endif
+++ /dev/null
-/* LEON2 header file. LEON2 is a SOC processor.
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __LEON2_H__
-#define __LEON2_H__
-
-#ifdef CONFIG_LEON2
-
-/* LEON 2 I/O register definitions */
-#define LEON2_PREGS 0x80000000
-#define LEON2_MCFG1 0x00
-#define LEON2_MCFG2 0x04
-#define LEON2_ECTRL 0x08
-#define LEON2_FADDR 0x0C
-#define LEON2_MSTAT 0x10
-#define LEON2_CCTRL 0x14
-#define LEON2_PWDOWN 0x18
-#define LEON2_WPROT1 0x1C
-#define LEON2_WPROT2 0x20
-#define LEON2_LCONF 0x24
-#define LEON2_TCNT0 0x40
-#define LEON2_TRLD0 0x44
-#define LEON2_TCTRL0 0x48
-#define LEON2_TCNT1 0x50
-#define LEON2_TRLD1 0x54
-#define LEON2_TCTRL1 0x58
-#define LEON2_SCNT 0x60
-#define LEON2_SRLD 0x64
-#define LEON2_UART0 0x70
-#define LEON2_UDATA0 0x70
-#define LEON2_USTAT0 0x74
-#define LEON2_UCTRL0 0x78
-#define LEON2_USCAL0 0x7C
-#define LEON2_UART1 0x80
-#define LEON2_UDATA1 0x80
-#define LEON2_USTAT1 0x84
-#define LEON2_UCTRL1 0x88
-#define LEON2_USCAL1 0x8C
-#define LEON2_IMASK 0x90
-#define LEON2_IPEND 0x94
-#define LEON2_IFORCE 0x98
-#define LEON2_ICLEAR 0x9C
-#define LEON2_IOREG 0xA0
-#define LEON2_IODIR 0xA4
-#define LEON2_IOICONF 0xA8
-#define LEON2_IPEND2 0xB0
-#define LEON2_IMASK2 0xB4
-#define LEON2_ISTAT2 0xB8
-#define LEON2_ICLEAR2 0xBC
-
-#ifndef __ASSEMBLER__
-/*
- * Structure for LEON memory mapped registers.
- *
- * Source: Section 6.1 - On-chip registers
- *
- * NOTE: There is only one of these structures per CPU, its base address
- * is 0x80000000, and the variable LEON_REG is placed there by the
- * linkcmds file.
- */
-typedef struct {
- volatile unsigned int Memory_Config_1;
- volatile unsigned int Memory_Config_2;
- volatile unsigned int Edac_Control;
- volatile unsigned int Failed_Address;
- volatile unsigned int Memory_Status;
- volatile unsigned int Cache_Control;
- volatile unsigned int Power_Down;
- volatile unsigned int Write_Protection_1;
- volatile unsigned int Write_Protection_2;
- volatile unsigned int Leon_Configuration;
- volatile unsigned int dummy2;
- volatile unsigned int dummy3;
- volatile unsigned int dummy4;
- volatile unsigned int dummy5;
- volatile unsigned int dummy6;
- volatile unsigned int dummy7;
- volatile unsigned int Timer_Counter_1;
- volatile unsigned int Timer_Reload_1;
- volatile unsigned int Timer_Control_1;
- volatile unsigned int Watchdog;
- volatile unsigned int Timer_Counter_2;
- volatile unsigned int Timer_Reload_2;
- volatile unsigned int Timer_Control_2;
- volatile unsigned int dummy8;
- volatile unsigned int Scaler_Counter;
- volatile unsigned int Scaler_Reload;
- volatile unsigned int dummy9;
- volatile unsigned int dummy10;
- volatile unsigned int UART_Channel_1;
- volatile unsigned int UART_Status_1;
- volatile unsigned int UART_Control_1;
- volatile unsigned int UART_Scaler_1;
- volatile unsigned int UART_Channel_2;
- volatile unsigned int UART_Status_2;
- volatile unsigned int UART_Control_2;
- volatile unsigned int UART_Scaler_2;
- volatile unsigned int Interrupt_Mask;
- volatile unsigned int Interrupt_Pending;
- volatile unsigned int Interrupt_Force;
- volatile unsigned int Interrupt_Clear;
- volatile unsigned int PIO_Data;
- volatile unsigned int PIO_Direction;
- volatile unsigned int PIO_Interrupt;
-} LEON2_regs;
-
-typedef struct {
- volatile unsigned int UART_Channel;
- volatile unsigned int UART_Status;
- volatile unsigned int UART_Control;
- volatile unsigned int UART_Scaler;
-} LEON2_Uart_regs;
-
-#endif
-
-/*
- * The following constants are intended to be used ONLY in assembly
- * language files.
- *
- * NOTE: The intended style of usage is to load the address of LEON REGS
- * into a register and then use these as displacements from
- * that register.
- */
-#define LEON_REG_MEMCFG1_OFFSET 0x00
-#define LEON_REG_MEMCFG2_OFFSET 0x04
-#define LEON_REG_EDACCTRL_OFFSET 0x08
-#define LEON_REG_FAILADDR_OFFSET 0x0C
-#define LEON_REG_MEMSTATUS_OFFSET 0x10
-#define LEON_REG_CACHECTRL_OFFSET 0x14
-#define LEON_REG_POWERDOWN_OFFSET 0x18
-#define LEON_REG_WRITEPROT1_OFFSET 0x1C
-#define LEON_REG_WRITEPROT2_OFFSET 0x20
-#define LEON_REG_LEONCONF_OFFSET 0x24
-#define LEON_REG_UNIMPLEMENTED_2_OFFSET 0x28
-#define LEON_REG_UNIMPLEMENTED_3_OFFSET 0x2C
-#define LEON_REG_UNIMPLEMENTED_4_OFFSET 0x30
-#define LEON_REG_UNIMPLEMENTED_5_OFFSET 0x34
-#define LEON_REG_UNIMPLEMENTED_6_OFFSET 0x38
-#define LEON_REG_UNIMPLEMENTED_7_OFFSET 0x3C
-#define LEON_REG_TIMERCNT1_OFFSET 0x40
-#define LEON_REG_TIMERLOAD1_OFFSET 0x44
-#define LEON_REG_TIMERCTRL1_OFFSET 0x48
-#define LEON_REG_WDOG_OFFSET 0x4C
-#define LEON_REG_TIMERCNT2_OFFSET 0x50
-#define LEON_REG_TIMERLOAD2_OFFSET 0x54
-#define LEON_REG_TIMERCTRL2_OFFSET 0x58
-#define LEON_REG_UNIMPLEMENTED_8_OFFSET 0x5C
-#define LEON_REG_SCALERCNT_OFFSET 0x60
-#define LEON_REG_SCALER_LOAD_OFFSET 0x64
-#define LEON_REG_UNIMPLEMENTED_9_OFFSET 0x68
-#define LEON_REG_UNIMPLEMENTED_10_OFFSET 0x6C
-#define LEON_REG_UARTDATA1_OFFSET 0x70
-#define LEON_REG_UARTSTATUS1_OFFSET 0x74
-#define LEON_REG_UARTCTRL1_OFFSET 0x78
-#define LEON_REG_UARTSCALER1_OFFSET 0x7C
-#define LEON_REG_UARTDATA2_OFFSET 0x80
-#define LEON_REG_UARTSTATUS2_OFFSET 0x84
-#define LEON_REG_UARTCTRL2_OFFSET 0x88
-#define LEON_REG_UARTSCALER2_OFFSET 0x8C
-#define LEON_REG_IRQMASK_OFFSET 0x90
-#define LEON_REG_IRQPEND_OFFSET 0x94
-#define LEON_REG_IRQFORCE_OFFSET 0x98
-#define LEON_REG_IRQCLEAR_OFFSET 0x9C
-#define LEON_REG_PIODATA_OFFSET 0xA0
-#define LEON_REG_PIODIR_OFFSET 0xA4
-#define LEON_REG_PIOIRQ_OFFSET 0xA8
-#define LEON_REG_SIM_RAM_SIZE_OFFSET 0xF4
-#define LEON_REG_SIM_ROM_SIZE_OFFSET 0xF8
-
-/*
- * Interrupt Sources
- *
- * The interrupt source numbers directly map to the trap type and to
- * the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask,
- * and the Interrupt Pending Registers.
- */
-#define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR 1
-#define LEON_INTERRUPT_UART_1_RX_TX 2
-#define LEON_INTERRUPT_UART_0_RX_TX 3
-#define LEON_INTERRUPT_EXTERNAL_0 4
-#define LEON_INTERRUPT_EXTERNAL_1 5
-#define LEON_INTERRUPT_EXTERNAL_2 6
-#define LEON_INTERRUPT_EXTERNAL_3 7
-#define LEON_INTERRUPT_TIMER1 8
-#define LEON_INTERRUPT_TIMER2 9
-#define LEON_INTERRUPT_EMPTY1 10
-#define LEON_INTERRUPT_EMPTY2 11
-#define LEON_INTERRUPT_OPEN_ETH 12
-#define LEON_INTERRUPT_EMPTY4 13
-#define LEON_INTERRUPT_EMPTY5 14
-#define LEON_INTERRUPT_EMPTY6 15
-
-/* Timer Bits */
-#define LEON2_TIMER_CTRL_EN 0x1 /* Timer enable */
-#define LEON2_TIMER_CTRL_RS 0x2 /* Timer reStart */
-#define LEON2_TIMER_CTRL_LD 0x4 /* Timer reLoad */
-#define LEON2_TIMER1_IRQNO 8 /* Timer 1 IRQ number */
-#define LEON2_TIMER2_IRQNO 9 /* Timer 2 IRQ number */
-#define LEON2_TIMER1_IE (1<<LEON2_TIMER1_IRQNO) /* Timer 1 interrupt enable */
-#define LEON2_TIMER2_IE (1<<LEON2_TIMER2_IRQNO) /* Timer 2 interrupt enable */
-
-/* UART bits */
-#define LEON2_UART_CTRL_RE 1 /* UART Receiver enable */
-#define LEON2_UART_CTRL_TE 2 /* UART Transmitter enable */
-#define LEON2_UART_CTRL_RI 4 /* UART Receiver Interrupt enable */
-#define LEON2_UART_CTRL_TI 8 /* UART Transmitter Interrupt enable */
-#define LEON2_UART_CTRL_DBG (1<<11) /* Debug Bit used by GRMON */
-
-#define LEON2_UART_STAT_DR 1 /* UART Data Ready */
-#define LEON2_UART_STAT_TSE 2 /* UART Transmit Shift Reg empty */
-#define LEON2_UART_STAT_THE 4 /* UART Transmit Hold Reg empty */
-
-#else
-#error Include LEON2 header file only if LEON2 processor
-#endif
-
-#endif
+++ /dev/null
-/* LEON3 header file. LEON3 is a free GPL SOC processor available
- * at www.gaisler.com.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __LEON3_H__
-#define __LEON3_H__
-
-#ifndef CONFIG_LEON3
-#error Include LEON3 header file only if LEON3 processor
-#endif
-
-/* Not much to define, most is Plug and Play and GRLIB dependent
- * not LEON3 dependent. See <ambapp.h> for GRLIB timers, interrupt
- * ctrl, memory controllers etc.
- */
-
-
-#ifndef __ASSEMBLER__
-/* The frequency of the CPU */
-extern unsigned int leon_cpu_freq;
-
-/* Number of LEON processors in system */
-extern int leon_cpu_cnt;
-
-/* Ver/subversion of CPU */
-extern int leon_ver;
-
-#endif /* __ASSEMBLER__ */
-
-#endif
+++ /dev/null
-/* machines.h: Defines for taking apart the machine type value in the
- * idprom and determining the kind of machine we are on.
- *
- * Taken from the SPARC port of Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2007 Daniel Hellstrom (daniel@gaisler.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_MACHINES_H__
-#define __SPARC_MACHINES_H__
-
-struct Sun_Machine_Models {
- char *name;
- unsigned char id_machtype;
-};
-
-/* Current number of machines we know about that has an IDPROM
- * machtype entry including one entry for the 0x80 OBP machines.
- */
-#define NUM_SUN_MACHINES 16
-
-extern struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES];
-
-/* The machine type in the idprom area looks like this:
- *
- * ---------------
- * | ARCH | MACH |
- * ---------------
- * 7 4 3 0
- *
- * The ARCH field determines the architecture line (sun4, sun4c, etc).
- * The MACH field determines the machine make within that architecture.
- */
-
-#define SM_ARCH_MASK 0xf0
-#define SM_SUN4 0x20
-#define M_LEON2 0x30
-#define SM_SUN4C 0x50
-#define SM_SUN4M 0x70
-#define SM_SUN4M_OBP 0x80
-
-#define SM_TYP_MASK 0x0f
-/* Sun4 machines */
-#define SM_4_260 0x01 /* Sun 4/200 series */
-#define SM_4_110 0x02 /* Sun 4/100 series */
-#define SM_4_330 0x03 /* Sun 4/300 series */
-#define SM_4_470 0x04 /* Sun 4/400 series */
-
-/* Leon machines */
-#define M_LEON2_SOC 0x01 /* Leon2 SoC */
-
-/* Sun4c machines Full Name - PROM NAME */
-#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */
-#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */
-#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */
-#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */
-#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */
-#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */
-#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */
-
-/* Sun4m machines, these predate the OpenBoot. These values only mean
- * something if the value in the ARCH field is SM_SUN4M, if it is
- * SM_SUN4M_OBP then you have the following situation:
- * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
- * 2) You have to consult OpenBoot to determine which machine this is.
- */
-#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */
-#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */
-#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */
-
-/* Sun4d machines -- N/A */
-/* Sun4e machines -- N/A */
-/* Sun4u machines -- N/A */
-
-#endif /* !(_SPARC_MACHINES_H) */
+++ /dev/null
-/* page.h: Various defines and such for MMU operations on the Sparc for
- * the Linux kernel.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2007 Daniel Hellstrom (daniel@gaisler.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SPARC_PAGE_H
-#define _SPARC_PAGE_H
-
-#ifdef CONFIG_SUN4
-#define PAGE_SHIFT 13
-#else
-#define PAGE_SHIFT 12
-#endif
-
-#ifndef __ASSEMBLY__
-/* I have my suspicions... -DaveM */
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#else
-#define PAGE_SIZE (1 << PAGE_SHIFT)
-#endif
-
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-#endif /* _SPARC_PAGE_H */
+++ /dev/null
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2007, taken from asm-ppc/posix_types.h
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_POSIX_TYPES_H__
-#define __SPARC_POSIX_TYPES_H__
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned int __kernel_dev_t;
-typedef unsigned int __kernel_ino_t;
-typedef unsigned int __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned int __kernel_uid_t;
-typedef unsigned int __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef long __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_daddr_t;
-typedef char *__kernel_caddr_t;
-typedef short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned int __kernel_old_uid_t;
-typedef unsigned int __kernel_old_gid_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
- int val[2];
-} __kernel_fsid_t;
-
-#ifndef __GNUC__
-
-#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
-#define __FD_ZERO(set) \
- ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
-
-#else /* __GNUC__ */
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
- || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-/* With GNU C, use inline functions instead so args are evaluated only once: */
-
-#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set * fdsetp)
-{
- unsigned long _tmp = fd / __NFDBITS;
- unsigned long _rem = fd % __NFDBITS;
- fdsetp->fds_bits[_tmp] |= (1UL << _rem);
-}
-
-#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set * fdsetp)
-{
- unsigned long _tmp = fd / __NFDBITS;
- unsigned long _rem = fd % __NFDBITS;
- fdsetp->fds_bits[_tmp] &= ~(1UL << _rem);
-}
-
-#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set * p)
-{
- unsigned long _tmp = fd / __NFDBITS;
- unsigned long _rem = fd % __NFDBITS;
- return (p->fds_bits[_tmp] & (1UL << _rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set * p)
-{
- unsigned int *tmp = (unsigned int *)p->fds_bits;
- int i;
-
- if (__builtin_constant_p(__FDSET_LONGS)) {
- switch (__FDSET_LONGS) {
- case 8:
- tmp[0] = 0;
- tmp[1] = 0;
- tmp[2] = 0;
- tmp[3] = 0;
- tmp[4] = 0;
- tmp[5] = 0;
- tmp[6] = 0;
- tmp[7] = 0;
- return;
- }
- }
- i = __FDSET_LONGS;
- while (i) {
- i--;
- *tmp = 0;
- tmp++;
- }
-}
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-#endif /* __GNUC__ */
-#endif /* _SPARC_POSIX_TYPES_H */
+++ /dev/null
-/* SPARC Processor specifics
- * taken from the SPARC port of Linux (ptrace.h).
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_SPARC_PROCESSOR_H
-#define __ASM_SPARC_PROCESSOR_H
-
-#include <asm/arch/asi.h>
-
-#ifdef CONFIG_LEON
-
-/* All LEON processors supported */
-#include <asm/leon.h>
-
-#else
-/* other processors */
-#error Unknown SPARC Processor
-#endif
-
-#ifndef __ASSEMBLY__
-
-/* flush data cache */
-static __inline__ void sparc_dcache_flush_all(void)
-{
- __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_DFLUSH):"memory");
-}
-
-/* flush instruction cache */
-static __inline__ void sparc_icache_flush_all(void)
-{
- __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_IFLUSH):"memory");
-}
-
-/* do a cache miss load */
-static __inline__ unsigned long long sparc_load_reg_cachemiss_qword(unsigned
- long paddr)
-{
- unsigned long long retval;
- __asm__ __volatile__("ldda [%1] %2, %0\n\t":
- "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
- return retval;
-}
-
-static __inline__ unsigned long sparc_load_reg_cachemiss(unsigned long paddr)
-{
- unsigned long retval;
- __asm__ __volatile__("lda [%1] %2, %0\n\t":
- "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
- return retval;
-}
-
-static __inline__ unsigned short sparc_load_reg_cachemiss_word(unsigned long
- paddr)
-{
- unsigned short retval;
- __asm__ __volatile__("lduha [%1] %2, %0\n\t":
- "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
- return retval;
-}
-
-static __inline__ unsigned char sparc_load_reg_cachemiss_byte(unsigned long
- paddr)
-{
- unsigned char retval;
- __asm__ __volatile__("lduba [%1] %2, %0\n\t":
- "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
- return retval;
-}
-
-/* do a physical address bypass write, i.e. for 0x80000000 */
-static __inline__ void sparc_store_reg_bypass(unsigned long paddr,
- unsigned long value)
-{
- __asm__ __volatile__("sta %0, [%1] %2\n\t"::"r"(value), "r"(paddr),
- "i"(ASI_BYPASS):"memory");
-}
-
-static __inline__ unsigned long sparc_load_reg_bypass(unsigned long paddr)
-{
- unsigned long retval;
- __asm__ __volatile__("lda [%1] %2, %0\n\t":
- "=r"(retval):"r"(paddr), "i"(ASI_BYPASS));
- return retval;
-}
-
-/* Macros for bypassing cache when reading */
-#define SPARC_NOCACHE_READ_DWORD(address) sparc_load_reg_cachemiss_qword((unsigned int)(address))
-#define SPARC_NOCACHE_READ(address) sparc_load_reg_cachemiss((unsigned int)(address))
-#define SPARC_NOCACHE_READ_HWORD(address) sparc_load_reg_cachemiss_word((unsigned int)(address))
-#define SPARC_NOCACHE_READ_BYTE(address) sparc_load_reg_cachemiss_byte((unsigned int)(address))
-
-#define SPARC_BYPASS_READ(address) sparc_load_reg_bypass((unsigned int)(address))
-#define SPARC_BYPASS_WRITE(address,value) sparc_store_reg_bypass((unsigned int)(address),(unsigned int)(value))
-
-#endif
-
-#endif /* __ASM_SPARC_PROCESSOR_H */
+++ /dev/null
-/* OpenProm defines mainly taken from linux kernel header files
- *
- * openprom.h: Prom structures and defines for access to the OPENBOOT
- * prom routines and data areas.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2007 Daniel Hellstrom (daniel@gaisler.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_OPENPROM_H__
-#define __SPARC_OPENPROM_H__
-
-/* Empirical constants... */
-#define LINUX_OPPROM_MAGIC 0x10010407
-
-#ifndef __ASSEMBLY__
-/* V0 prom device operations. */
-struct linux_dev_v0_funcs {
- int (*v0_devopen) (char *device_str);
- int (*v0_devclose) (int dev_desc);
- int (*v0_rdblkdev) (int dev_desc, int num_blks, int blk_st, char *buf);
- int (*v0_wrblkdev) (int dev_desc, int num_blks, int blk_st, char *buf);
- int (*v0_wrnetdev) (int dev_desc, int num_bytes, char *buf);
- int (*v0_rdnetdev) (int dev_desc, int num_bytes, char *buf);
- int (*v0_rdchardev) (int dev_desc, int num_bytes, int dummy, char *buf);
- int (*v0_wrchardev) (int dev_desc, int num_bytes, int dummy, char *buf);
- int (*v0_seekdev) (int dev_desc, long logical_offst, int from);
-};
-
-/* V2 and later prom device operations. */
-struct linux_dev_v2_funcs {
- int (*v2_inst2pkg) (int d); /* Convert ihandle to phandle */
- char *(*v2_dumb_mem_alloc) (char *va, unsigned sz);
- void (*v2_dumb_mem_free) (char *va, unsigned sz);
-
- /* To map devices into virtual I/O space. */
- char *(*v2_dumb_mmap) (char *virta, int which_io, unsigned paddr,
- unsigned sz);
- void (*v2_dumb_munmap) (char *virta, unsigned size);
-
- int (*v2_dev_open) (char *devpath);
- void (*v2_dev_close) (int d);
- int (*v2_dev_read) (int d, char *buf, int nbytes);
- int (*v2_dev_write) (int d, char *buf, int nbytes);
- int (*v2_dev_seek) (int d, int hi, int lo);
-
- /* Never issued (multistage load support) */
- void (*v2_wheee2) (void);
- void (*v2_wheee3) (void);
-};
-
-struct linux_mlist_v0 {
- struct linux_mlist_v0 *theres_more;
- char *start_adr;
- unsigned num_bytes;
-};
-
-struct linux_mem_v0 {
- struct linux_mlist_v0 **v0_totphys;
- struct linux_mlist_v0 **v0_prommap;
- struct linux_mlist_v0 **v0_available; /* What we can use */
-};
-
-/* Arguments sent to the kernel from the boot prompt. */
-struct linux_arguments_v0 {
- char * const argv[8];
- char args[100];
- char boot_dev[2];
- int boot_dev_ctrl;
- int boot_dev_unit;
- int dev_partition;
- char *kernel_file_name;
- void *aieee1; /* XXX */
-};
-
-/* V2 and up boot things. */
-struct linux_bootargs_v2 {
- char **bootpath;
- char **bootargs;
- int *fd_stdin;
- int *fd_stdout;
-};
-
-/* The top level PROM vector. */
-struct linux_romvec {
- /* Version numbers. */
- unsigned int pv_magic_cookie;
- unsigned int pv_romvers;
- unsigned int pv_plugin_revision;
- unsigned int pv_printrev;
-
- /* Version 0 memory descriptors. */
- struct linux_mem_v0 pv_v0mem;
-
- /* Node operations. */
- struct linux_nodeops *pv_nodeops;
-
- char **pv_bootstr;
- struct linux_dev_v0_funcs pv_v0devops;
-
- char *pv_stdin;
- char *pv_stdout;
-#define PROMDEV_KBD 0 /* input from keyboard */
-#define PROMDEV_SCREEN 0 /* output to screen */
-#define PROMDEV_TTYA 1 /* in/out to ttya */
-#define PROMDEV_TTYB 2 /* in/out to ttyb */
-
- /* Blocking getchar/putchar. NOT REENTRANT! (grr) */
- int (*pv_getchar) (void);
- void (*pv_putchar) (int ch);
-
- /* Non-blocking variants. */
- int (*pv_nbgetchar) (void);
- int (*pv_nbputchar) (int ch);
-
- void (*pv_putstr) (char *str, int len);
-
- /* Miscellany. */
- void (*pv_reboot) (char *bootstr);
- void (*pv_printf) (__const__ char *fmt, ...);
- void (*pv_abort) (void);
- __volatile__ int *pv_ticks;
- void (*pv_halt) (void);
- void (**pv_synchook) (void);
-
- /* Evaluate a forth string, not different proto for V0 and V2->up. */
- union {
- void (*v0_eval) (int len, char *str);
- void (*v2_eval) (char *str);
- } pv_fortheval;
-
- struct linux_arguments_v0 **pv_v0bootargs;
-
- /* Get ether address. */
- unsigned int (*pv_enaddr) (int d, char *enaddr);
-
- struct linux_bootargs_v2 pv_v2bootargs;
- struct linux_dev_v2_funcs pv_v2devops;
-
- int filler[15];
-
- /* This one is sun4c/sun4 only. */
- void (*pv_setctxt) (int ctxt, char *va, int pmeg);
-
- /* Prom version 3 Multiprocessor routines. This stuff is crazy.
- * No joke. Calling these when there is only one cpu probably
- * crashes the machine, have to test this. :-)
- */
-
- /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
- * 'thiscontext' executing at address 'prog_counter'
- */
- int (*v3_cpustart) (unsigned int whichcpu, int ctxtbl_ptr,
- int thiscontext, char *prog_counter);
-
- /* v3_cpustop() will cause cpu 'whichcpu' to stop executing
- * until a resume cpu call is made.
- */
- int (*v3_cpustop) (unsigned int whichcpu);
-
- /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
- * resume cpu call is made.
- */
- int (*v3_cpuidle) (unsigned int whichcpu);
-
- /* v3_cpuresume() will resume processor 'whichcpu' executing
- * starting with whatever 'pc' and 'npc' were left at the
- * last 'idle' or 'stop' call.
- */
- int (*v3_cpuresume) (unsigned int whichcpu);
-};
-
-/* Routines for traversing the prom device tree. */
-struct linux_nodeops {
- int (*no_nextnode) (int node);
- int (*no_child) (int node);
- int (*no_proplen) (int node, char *name);
- int (*no_getprop) (int node, char *name, char *val);
- int (*no_setprop) (int node, char *name, char *val, int len);
- char *(*no_nextprop) (int node, char *name);
-};
-
-/* More fun PROM structures for device probing. */
-#define PROMREG_MAX 16
-#define PROMVADDR_MAX 16
-#define PROMINTR_MAX 15
-
-struct linux_prom_registers {
- unsigned int which_io; /* is this in OBIO space? */
- unsigned int phys_addr; /* The physical address of this register */
- unsigned int reg_size; /* How many bytes does this register take up? */
-};
-
-struct linux_prom_irqs {
- int pri; /* IRQ priority */
- int vector; /* This is foobar, what does it do? */
-};
-
-/* Element of the "ranges" vector */
-struct linux_prom_ranges {
- unsigned int ot_child_space;
- unsigned int ot_child_base; /* Bus feels this */
- unsigned int ot_parent_space;
- unsigned int ot_parent_base; /* CPU looks from here */
- unsigned int or_size;
-};
-
-/* Ranges and reg properties are a bit different for PCI. */
-struct linux_prom_pci_registers {
- /*
- * We don't know what information this field contain.
- * We guess, PCI device function is in bits 15:8
- * So, ...
- */
- unsigned int which_io; /* Let it be which_io */
-
- unsigned int phys_hi;
- unsigned int phys_lo;
-
- unsigned int size_hi;
- unsigned int size_lo;
-};
-
-struct linux_prom_pci_ranges {
- unsigned int child_phys_hi; /* Only certain bits are encoded here. */
- unsigned int child_phys_mid;
- unsigned int child_phys_lo;
-
- unsigned int parent_phys_hi;
- unsigned int parent_phys_lo;
-
- unsigned int size_hi;
- unsigned int size_lo;
-};
-
-struct linux_prom_pci_assigned_addresses {
- unsigned int which_io;
-
- unsigned int phys_hi;
- unsigned int phys_lo;
-
- unsigned int size_hi;
- unsigned int size_lo;
-};
-
-struct linux_prom_ebus_ranges {
- unsigned int child_phys_hi;
- unsigned int child_phys_lo;
-
- unsigned int parent_phys_hi;
- unsigned int parent_phys_mid;
- unsigned int parent_phys_lo;
-
- unsigned int size;
-};
-
-/* Offset into the EEPROM where the id PROM is located on the 4c */
-#define IDPROM_OFFSET 0x7d8
-
-/* On sun4m; physical. */
-/* MicroSPARC(-II) does not decode 31rd bit, but it works. */
-#define IDPROM_OFFSET_M 0xfd8
-
-struct idprom {
- unsigned char id_format; /* Format identifier (always 0x01) */
- unsigned char id_machtype; /* Machine type */
- unsigned char id_ethaddr[6]; /* Hardware ethernet address */
- long id_date; /* Date of manufacture */
- unsigned int id_sernum:24; /* Unique serial number */
- unsigned char id_cksum; /* Checksum - xor of the data bytes */
- unsigned char reserved[16];
-};
-
-extern struct idprom *idprom;
-extern void idprom_init(void);
-
-#define IDPROM_SIZE (sizeof(struct idprom))
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif
+++ /dev/null
-/* psr.h: This file holds the macros for masking off various parts of
- * the processor status register on the Sparc. This is valid
- * for Version 8. On the V9 this is renamed to the PSTATE
- * register and its members are accessed as fields like
- * PSTATE.PRIV for the current CPU privilege level.
- *
- * taken from the SPARC port of Linux,
- *
- * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2007 Daniel Hellstrom (daniel@gaisler.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_PSR_H__
-#define __SPARC_PSR_H__
-
-/* The Sparc PSR fields are laid out as the following:
- *
- * ------------------------------------------------------------------------
- * | impl | vers | icc | resv | EC | EF | PIL | S | PS | ET | CWP |
- * | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6 | 5 | 4-0 |
- * ------------------------------------------------------------------------
- */
-#define PSR_CWP 0x0000001f /* current window pointer */
-#define PSR_ET 0x00000020 /* enable traps field */
-#define PSR_PS 0x00000040 /* previous privilege level */
-#define PSR_S 0x00000080 /* current privilege level */
-#define PSR_PIL 0x00000f00 /* processor interrupt level */
-#define PSR_EF 0x00001000 /* enable floating point */
-#define PSR_EC 0x00002000 /* enable co-processor */
-#define PSR_LE 0x00008000 /* SuperSparcII little-endian */
-#define PSR_ICC 0x00f00000 /* integer condition codes */
-#define PSR_C 0x00100000 /* carry bit */
-#define PSR_V 0x00200000 /* overflow bit */
-#define PSR_Z 0x00400000 /* zero bit */
-#define PSR_N 0x00800000 /* negative bit */
-#define PSR_VERS 0x0f000000 /* cpu-version field */
-#define PSR_IMPL 0xf0000000 /* cpu-implementation field */
-
-#define PSR_PIL_OFS 8
-
-#ifndef __ASSEMBLY__
-/* Get the %psr register. */
-static __inline__ unsigned int get_psr(void)
-{
- unsigned int psr;
- __asm__ __volatile__("rd %%psr, %0\n\t"
- "nop\n\t" "nop\n\t" "nop\n\t":"=r"(psr)
- : /* no inputs */
- :"memory");
-
- return psr;
-}
-
-static __inline__ void put_psr(unsigned int new_psr)
-{
- __asm__ __volatile__("wr %0, 0x0, %%psr\n\t" "nop\n\t" "nop\n\t" "nop\n\t": /* no outputs */
- :"r"(new_psr)
- :"memory", "cc");
-}
-
-/* Get the %fsr register. Be careful, make sure the floating point
- * enable bit is set in the %psr when you execute this or you will
- * incur a trap.
- */
-
-extern unsigned int fsr_storage;
-
-static __inline__ unsigned int get_fsr(void)
-{
- unsigned int fsr = 0;
-
- __asm__ __volatile__("st %%fsr, %1\n\t"
- "ld %1, %0\n\t":"=r"(fsr)
- :"m"(fsr_storage));
-
- return fsr;
-}
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC_PSR_H__) */
+++ /dev/null
-/* Contain the Stack frame layout on interrupt. pt_regs.
- * taken from the SPARC port of Linux (ptrace.h).
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_PTRACE_H__
-#define __SPARC_PTRACE_H__
-
-#include <asm/psr.h>
-
-/* This struct defines the way the registers are stored on the
- * stack during a system call and basically all traps.
- */
-
-#ifndef __ASSEMBLY__
-
-struct pt_regs {
- unsigned long psr;
- unsigned long pc;
- unsigned long npc;
- unsigned long y;
- unsigned long u_regs[16]; /* globals and ins */
-};
-
-#define UREG_G0 0
-#define UREG_G1 1
-#define UREG_G2 2
-#define UREG_G3 3
-#define UREG_G4 4
-#define UREG_G5 5
-#define UREG_G6 6
-#define UREG_G7 7
-#define UREG_I0 8
-#define UREG_I1 9
-#define UREG_I2 10
-#define UREG_I3 11
-#define UREG_I4 12
-#define UREG_I5 13
-#define UREG_I6 14
-#define UREG_I7 15
-#define UREG_WIM UREG_G0
-#define UREG_FADDR UREG_G0
-#define UREG_FP UREG_I6
-#define UREG_RETPC UREG_I7
-
-/* A register window */
-struct reg_window {
- unsigned long locals[8];
- unsigned long ins[8];
-};
-
-/* A Sparc stack frame */
-struct sparc_stackf {
- unsigned long locals[8];
- unsigned long ins[6];
- struct sparc_stackf *fp;
- unsigned long callers_pc;
- char *structptr;
- unsigned long xargs[6];
- unsigned long xxargs[1];
-};
-
-#define TRACEREG_SZ sizeof(struct pt_regs)
-#define STACKFRAME_SZ sizeof(struct sparc_stackf)
-
-#else /* __ASSEMBLY__ */
-/* For assembly code. */
-#define TRACEREG_SZ 0x50
-#define STACKFRAME_SZ 0x60
-#endif
-
-/*
- * The asm_offsets.h is a generated file, so we cannot include it.
- * It may be OK for glibc headers, but it's utterly pointless for C code.
- * The assembly code using those offsets has to include it explicitly.
- */
-/* #include <asm/asm_offsets.h> */
-
-/* These are for pt_regs. */
-#define PT_PSR 0x0
-#define PT_PC 0x4
-#define PT_NPC 0x8
-#define PT_Y 0xc
-#define PT_G0 0x10
-#define PT_WIM PT_G0
-#define PT_G1 0x14
-#define PT_G2 0x18
-#define PT_G3 0x1c
-#define PT_G4 0x20
-#define PT_G5 0x24
-#define PT_G6 0x28
-#define PT_G7 0x2c
-#define PT_I0 0x30
-#define PT_I1 0x34
-#define PT_I2 0x38
-#define PT_I3 0x3c
-#define PT_I4 0x40
-#define PT_I5 0x44
-#define PT_I6 0x48
-#define PT_FP PT_I6
-#define PT_I7 0x4c
-
-/* Reg_window offsets */
-#define RW_L0 0x00
-#define RW_L1 0x04
-#define RW_L2 0x08
-#define RW_L3 0x0c
-#define RW_L4 0x10
-#define RW_L5 0x14
-#define RW_L6 0x18
-#define RW_L7 0x1c
-#define RW_I0 0x20
-#define RW_I1 0x24
-#define RW_I2 0x28
-#define RW_I3 0x2c
-#define RW_I4 0x30
-#define RW_I5 0x34
-#define RW_I6 0x38
-#define RW_I7 0x3c
-
-/* Stack_frame offsets */
-#define SF_L0 0x00
-#define SF_L1 0x04
-#define SF_L2 0x08
-#define SF_L3 0x0c
-#define SF_L4 0x10
-#define SF_L5 0x14
-#define SF_L6 0x18
-#define SF_L7 0x1c
-#define SF_I0 0x20
-#define SF_I1 0x24
-#define SF_I2 0x28
-#define SF_I3 0x2c
-#define SF_I4 0x30
-#define SF_I5 0x34
-#define SF_FP 0x38
-#define SF_PC 0x3c
-#define SF_RETP 0x40
-#define SF_XARG0 0x44
-#define SF_XARG1 0x48
-#define SF_XARG2 0x4c
-#define SF_XARG3 0x50
-#define SF_XARG4 0x54
-#define SF_XARG5 0x58
-#define SF_XXARG 0x5c
-
-/* Stuff for the ptrace system call */
-#define PTRACE_SUNATTACH 10
-#define PTRACE_SUNDETACH 11
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-#define PTRACE_READDATA 16
-#define PTRACE_WRITEDATA 17
-#define PTRACE_READTEXT 18
-#define PTRACE_WRITETEXT 19
-#define PTRACE_GETFPAREGS 20
-#define PTRACE_SETFPAREGS 21
-
-#define PTRACE_GETUCODE 29 /* stupid bsd-ism */
-
-#endif /* !(_SPARC_PTRACE_H) */
+++ /dev/null
-/*
- * Copyright (c) 2012 The Chromium OS Authors.
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_SPARC_SECTIONS_H
-#define __ASM_SPARC_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif
+++ /dev/null
-/* SRMMU page table defines and code,
- * taken from the SPARC port of Linux
- *
- * Copyright (C) 2007 Daniel Hellstrom (daniel@gaisler.com)
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_SRMMU_H__
-#define __SPARC_SRMMU_H__
-
-#include <asm/asi.h>
-#include <asm/page.h>
-
-/* Number of contexts is implementation-dependent; 64k is the most we support */
-#define SRMMU_MAX_CONTEXTS 65536
-
-/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
-#define SRMMU_REAL_PMD_SHIFT 18
-#define SRMMU_REAL_PMD_SIZE (1UL << SRMMU_REAL_PMD_SHIFT)
-#define SRMMU_REAL_PMD_MASK (~(SRMMU_REAL_PMD_SIZE-1))
-#define SRMMU_REAL_PMD_ALIGN(__addr) (((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define SRMMU_PGDIR_SHIFT 24
-#define SRMMU_PGDIR_SIZE (1UL << SRMMU_PGDIR_SHIFT)
-#define SRMMU_PGDIR_MASK (~(SRMMU_PGDIR_SIZE-1))
-#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
-
-#define SRMMU_REAL_PTRS_PER_PTE 64
-#define SRMMU_REAL_PTRS_PER_PMD 64
-#define SRMMU_PTRS_PER_PGD 256
-
-#define SRMMU_REAL_PTE_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PTE*4)
-#define SRMMU_PMD_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PMD*4)
-#define SRMMU_PGD_TABLE_SIZE (SRMMU_PTRS_PER_PGD*4)
-
-/*
- * To support pagetables in highmem, Linux introduces APIs which
- * return struct page* and generally manipulate page tables when
- * they are not mapped into kernel space. Our hardware page tables
- * are smaller than pages. We lump hardware tabes into big, page sized
- * software tables.
- *
- * PMD_SHIFT determines the size of the area a second-level page table entry
- * can map, and our pmd_t is 16 times larger than normal. The values which
- * were once defined here are now generic for 4c and srmmu, so they're
- * found in pgtable.h.
- */
-#define SRMMU_PTRS_PER_PMD 4
-
-/* Definition of the values in the ET field of PTD's and PTE's */
-#define SRMMU_ET_MASK 0x3
-#define SRMMU_ET_INVALID 0x0
-#define SRMMU_ET_PTD 0x1
-#define SRMMU_ET_PTE 0x2
-#define SRMMU_ET_REPTE 0x3 /* AIEEE, SuperSparc II reverse endian page! */
-
-/* Physical page extraction from PTP's and PTE's. */
-#define SRMMU_CTX_PMASK 0xfffffff0
-#define SRMMU_PTD_PMASK 0xfffffff0
-#define SRMMU_PTE_PMASK 0xffffff00
-
-/* The pte non-page bits. Some notes:
- * 1) cache, dirty, valid, and ref are frobbable
- * for both supervisor and user pages.
- * 2) exec and write will only give the desired effect
- * on user pages
- * 3) use priv and priv_readonly for changing the
- * characteristics of supervisor ptes
- */
-#define SRMMU_CACHE 0x80
-#define SRMMU_DIRTY 0x40
-#define SRMMU_REF 0x20
-#define SRMMU_NOREAD 0x10
-#define SRMMU_EXEC 0x08
-#define SRMMU_WRITE 0x04
-#define SRMMU_VALID 0x02 /* SRMMU_ET_PTE */
-#define SRMMU_PRIV 0x1c
-#define SRMMU_PRIV_RDONLY 0x18
-
-#define SRMMU_FILE 0x40 /* Implemented in software */
-
-#define SRMMU_PTE_FILE_SHIFT 8 /* == 32-PTE_FILE_MAX_BITS */
-
-#define SRMMU_CHG_MASK (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
-
-/* SRMMU swap entry encoding
- *
- * We use 5 bits for the type and 19 for the offset. This gives us
- * 32 swapfiles of 4GB each. Encoding looks like:
- *
- * oooooooooooooooooootttttRRRRRRRR
- * fedcba9876543210fedcba9876543210
- *
- * The bottom 8 bits are reserved for protection and status bits, especially
- * FILE and PRESENT.
- */
-#define SRMMU_SWP_TYPE_MASK 0x1f
-#define SRMMU_SWP_TYPE_SHIFT SRMMU_PTE_FILE_SHIFT
-#define SRMMU_SWP_OFF_MASK 0x7ffff
-#define SRMMU_SWP_OFF_SHIFT (SRMMU_PTE_FILE_SHIFT + 5)
-
-/* Some day I will implement true fine grained access bits for
- * user pages because the SRMMU gives us the capabilities to
- * enforce all the protection levels that vma's can have.
- * XXX But for now...
- */
-#define SRMMU_PAGE_NONE __pgprot(SRMMU_CACHE | \
- SRMMU_PRIV | SRMMU_REF)
-#define SRMMU_PAGE_SHARED __pgprot(SRMMU_VALID | SRMMU_CACHE | \
- SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
-#define SRMMU_PAGE_COPY __pgprot(SRMMU_VALID | SRMMU_CACHE | \
- SRMMU_EXEC | SRMMU_REF)
-#define SRMMU_PAGE_RDONLY __pgprot(SRMMU_VALID | SRMMU_CACHE | \
- SRMMU_EXEC | SRMMU_REF)
-#define SRMMU_PAGE_KERNEL __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
- SRMMU_DIRTY | SRMMU_REF)
-
-/* SRMMU Register addresses in ASI 0x4. These are valid for all
- * current SRMMU implementations that exist.
- */
-#define SRMMU_CTRL_REG 0x00000000
-#define SRMMU_CTXTBL_PTR 0x00000100
-#define SRMMU_CTX_REG 0x00000200
-#define SRMMU_FAULT_STATUS 0x00000300
-#define SRMMU_FAULT_ADDR 0x00000400
-
-#define WINDOW_FLUSH(tmp1, tmp2) \
- mov 0, tmp1; \
-98: ld [%g6 + TI_UWINMASK], tmp2; \
- orcc %g0, tmp2, %g0; \
- add tmp1, 1, tmp1; \
- bne 98b; \
- save %sp, -64, %sp; \
-99: subcc tmp1, 1, tmp1; \
- bne 99b; \
- restore %g0, %g0, %g0;
-
-#ifndef __ASSEMBLY__
-
-/* This makes sense. Honest it does - Anton */
-/* XXX Yes but it's ugly as sin. FIXME. -KMW */
-extern void *srmmu_nocache_pool;
-#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
-#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
-#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
-
-/* Accessing the MMU control register. */
-static __inline__ unsigned int srmmu_get_mmureg(void)
-{
- unsigned int retval;
- __asm__ __volatile__("lda [%%g0] %1, %0\n\t":
- "=r"(retval):"i"(ASI_M_MMUREGS));
- return retval;
-}
-
-static __inline__ void srmmu_set_mmureg(unsigned long regval)
-{
- __asm__ __volatile__("sta %0, [%%g0] %1\n\t"::"r"(regval),
- "i"(ASI_M_MMUREGS):"memory");
-
-}
-
-static __inline__ void srmmu_set_ctable_ptr(unsigned long paddr)
-{
- paddr = ((paddr >> 4) & SRMMU_CTX_PMASK);
- __asm__ __volatile__("sta %0, [%1] %2\n\t"::"r"(paddr),
- "r"(SRMMU_CTXTBL_PTR),
- "i"(ASI_M_MMUREGS):"memory");
-}
-
-static __inline__ unsigned long srmmu_get_ctable_ptr(void)
-{
- unsigned int retval;
-
- __asm__ __volatile__("lda [%1] %2, %0\n\t":
- "=r"(retval):
- "r"(SRMMU_CTXTBL_PTR), "i"(ASI_M_MMUREGS));
- return (retval & SRMMU_CTX_PMASK) << 4;
-}
-
-static __inline__ void srmmu_set_context(int context)
-{
- __asm__ __volatile__("sta %0, [%1] %2\n\t"::"r"(context),
- "r"(SRMMU_CTX_REG), "i"(ASI_M_MMUREGS):"memory");
-}
-
-static __inline__ int srmmu_get_context(void)
-{
- register int retval;
- __asm__ __volatile__("lda [%1] %2, %0\n\t":
- "=r"(retval):
- "r"(SRMMU_CTX_REG), "i"(ASI_M_MMUREGS));
- return retval;
-}
-
-static __inline__ unsigned int srmmu_get_fstatus(void)
-{
- unsigned int retval;
-
- __asm__ __volatile__("lda [%1] %2, %0\n\t":
- "=r"(retval):
- "r"(SRMMU_FAULT_STATUS), "i"(ASI_M_MMUREGS));
- return retval;
-}
-
-static __inline__ unsigned int srmmu_get_faddr(void)
-{
- unsigned int retval;
-
- __asm__ __volatile__("lda [%1] %2, %0\n\t":
- "=r"(retval):
- "r"(SRMMU_FAULT_ADDR), "i"(ASI_M_MMUREGS));
- return retval;
-}
-
-/* This is guaranteed on all SRMMU's. */
-static __inline__ void srmmu_flush_whole_tlb(void)
-{
- __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x400), /* Flush entire TLB!! */
- "i"(ASI_M_FLUSH_PROBE):"memory");
-
-}
-
-/* These flush types are not available on all chips... */
-static __inline__ void srmmu_flush_tlb_ctx(void)
-{
- __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x300), /* Flush TLB ctx.. */
- "i"(ASI_M_FLUSH_PROBE):"memory");
-
-}
-
-static __inline__ void srmmu_flush_tlb_region(unsigned long addr)
-{
- addr &= SRMMU_PGDIR_MASK;
- __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(addr | 0x200), /* Flush TLB region.. */
- "i"(ASI_M_FLUSH_PROBE):"memory");
-
-}
-
-static __inline__ void srmmu_flush_tlb_segment(unsigned long addr)
-{
- addr &= SRMMU_REAL_PMD_MASK;
- __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(addr | 0x100), /* Flush TLB segment.. */
- "i"(ASI_M_FLUSH_PROBE):"memory");
-
-}
-
-static __inline__ void srmmu_flush_tlb_page(unsigned long page)
-{
- page &= PAGE_MASK;
- __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(page), /* Flush TLB page.. */
- "i"(ASI_M_FLUSH_PROBE):"memory");
-
-}
-
-static __inline__ unsigned long srmmu_hwprobe(unsigned long vaddr)
-{
- unsigned long retval;
-
- vaddr &= PAGE_MASK;
- __asm__ __volatile__("lda [%1] %2, %0\n\t":
- "=r"(retval):
- "r"(vaddr | 0x400), "i"(ASI_M_FLUSH_PROBE));
-
- return retval;
-}
-
-static __inline__ int srmmu_get_pte(unsigned long addr)
-{
- register unsigned long entry;
-
- __asm__ __volatile__("\n\tlda [%1] %2,%0\n\t":
- "=r"(entry):
- "r"((addr & 0xfffff000) | 0x400),
- "i"(ASI_M_FLUSH_PROBE));
- return entry;
-}
-
-extern unsigned long (*srmmu_read_physical) (unsigned long paddr);
-extern void (*srmmu_write_physical) (unsigned long paddr, unsigned long word);
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC_SRMMU_H__) */
+++ /dev/null
-/* SPARC stack layout Macros and structures,
- * mainly taken from BCC (the Bare C compiler for
- * SPARC LEON2/3) sources.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_STACK_H__
-#define __SPARC_STACK_H__
-
-#include <asm/ptrace.h>
-
-#ifndef __ASSEMBLER__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define PT_REGS_SZ sizeof(struct pt_regs)
-
-/* A Sparc stack frame */
- struct sparc_stackframe_regs {
- unsigned long sf_locals[8];
- unsigned long sf_ins[6];
- struct sparc_stackframe_regs *sf_fp;
- unsigned long sf_callers_pc;
- char *sf_structptr;
- unsigned long sf_xargs[6];
- unsigned long sf_xxargs[1];
- };
-#define SF_REGS_SZ sizeof(struct sparc_stackframe_regs)
-
-/* A register window */
- struct sparc_regwindow_regs {
- unsigned long locals[8];
- unsigned long ins[8];
- };
-#define RW_REGS_SZ sizeof(struct sparc_regwindow_regs)
-
-/* A fpu window */
- struct sparc_fpuwindow_regs {
- unsigned long locals[32];
- unsigned long fsr;
- unsigned long lastctx;
- };
-#define FW_REGS_SZ sizeof(struct sparc_fpuwindow_regs)
-
-#ifdef __cplusplus
-}
-#endif
-#else
-#define PT_REGS_SZ 0x50 /* 20*4 */
-#define SF_REGS_SZ 0x60 /* 24*4 */
-#define RW_REGS_SZ 0x20 /* 16*4 */
-#define FW_REGS_SZ 0x88 /* 34*4 */
-#endif /* !ASM */
-
-/* These are for pt_regs. */
-#define PT_PSR 0x0
-#define PT_PC 0x4
-#define PT_NPC 0x8
-#define PT_Y 0xc
-#define PT_G0 0x10
-#define PT_WIM PT_G0
-#define PT_G1 0x14
-#define PT_G2 0x18
-#define PT_G3 0x1c
-#define PT_G4 0x20
-#define PT_G5 0x24
-#define PT_G6 0x28
-#define PT_G7 0x2c
-#define PT_I0 0x30
-#define PT_I1 0x34
-#define PT_I2 0x38
-#define PT_I3 0x3c
-#define PT_I4 0x40
-#define PT_I5 0x44
-#define PT_I6 0x48
-#define PT_FP PT_I6
-#define PT_I7 0x4c
-
-/* Stack_frame offsets */
-#define SF_L0 0x00
-#define SF_L1 0x04
-#define SF_L2 0x08
-#define SF_L3 0x0c
-#define SF_L4 0x10
-#define SF_L5 0x14
-#define SF_L6 0x18
-#define SF_L7 0x1c
-#define SF_I0 0x20
-#define SF_I1 0x24
-#define SF_I2 0x28
-#define SF_I3 0x2c
-#define SF_I4 0x30
-#define SF_I5 0x34
-#define SF_FP 0x38
-#define SF_PC 0x3c
-#define SF_RETP 0x40
-#define SF_XARG0 0x44
-#define SF_XARG1 0x48
-#define SF_XARG2 0x4c
-#define SF_XARG3 0x50
-#define SF_XARG4 0x54
-#define SF_XARG5 0x58
-#define SF_XXARG 0x5c
-
-/* Reg_window offsets */
-#define RW_L0 0x00
-#define RW_L1 0x04
-#define RW_L2 0x08
-#define RW_L3 0x0c
-#define RW_L4 0x10
-#define RW_L5 0x14
-#define RW_L6 0x18
-#define RW_L7 0x1c
-#define RW_I0 0x20
-#define RW_I1 0x24
-#define RW_I2 0x28
-#define RW_I3 0x2c
-#define RW_I4 0x30
-#define RW_I5 0x34
-#define RW_I6 0x38
-#define RW_I7 0x3c
-
-/* Fpu_window offsets */
-#define FW_F0 0x00
-#define FW_F2 0x08
-#define FW_F4 0x10
-#define FW_F6 0x18
-#define FW_F8 0x20
-#define FW_F10 0x28
-#define FW_F12 0x30
-#define FW_F14 0x38
-#define FW_F16 0x40
-#define FW_F18 0x48
-#define FW_F20 0x50
-#define FW_F22 0x58
-#define FW_F24 0x60
-#define FW_F26 0x68
-#define FW_F28 0x70
-#define FW_F30 0x78
-#define FW_FSR 0x80
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SPARC_STRING_H_
-#define _SPARC_STRING_H_
-
-/*
-#define __HAVE_ARCH_STRCPY
-#define __HAVE_ARCH_STRNCPY
-#define __HAVE_ARCH_STRLEN
-#define __HAVE_ARCH_STRCMP
-#define __HAVE_ARCH_STRCAT
-#define __HAVE_ARCH_MEMSET
-#define __HAVE_ARCH_BCOPY
-#define __HAVE_ARCH_MEMCPY
-#define __HAVE_ARCH_MEMMOVE
-#define __HAVE_ARCH_MEMCMP
-#define __HAVE_ARCH_MEMCHR
-*/
-
-extern int strcasecmp(const char *, const char *);
-extern int strncasecmp(const char *, const char *, __kernel_size_t);
-extern char *strcpy(char *, const char *);
-extern char *strncpy(char *, const char *, __kernel_size_t);
-extern __kernel_size_t strlen(const char *);
-extern int strcmp(const char *, const char *);
-extern char *strcat(char *, const char *);
-extern void *memset(void *, int, __kernel_size_t);
-extern void *memcpy(void *, const void *, __kernel_size_t);
-extern void *memmove(void *, const void *, __kernel_size_t);
-extern int memcmp(const void *, const void *, __kernel_size_t);
-extern void *memchr(const void *, int, __kernel_size_t);
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SPARC_TYPES_H
-#define _SPARC_TYPES_H
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-#endif
-
-typedef struct {
- __u32 u[4];
-} __attribute__((aligned(16))) vector128;
-
-#ifdef __KERNEL__
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32
-
-/* DMA addresses are 32-bits wide */
-typedef u32 dma_addr_t;
-
-typedef unsigned long phys_addr_t;
-typedef unsigned long phys_size_t;
-
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __U_BOOT_H__
-#define __U_BOOT_H__
-
-/* Currently, this board information is not passed to
- * Linux kernel from U-Boot, but may be passed to other
- * Operating systems. This is because U-Boot emulates
- * a SUN PROM loader (from Linux point of view).
- */
-#include <asm-generic/u-boot.h>
-
-/* For image.h:image_check_target_arch() */
-#define IH_ARCH_DEFAULT IH_ARCH_SPARC
-
-#endif
+++ /dev/null
-#ifndef _ASM_SPARC_UNALIGNED_H
-#define _ASM_SPARC_UNALIGNED_H
-
-/*
- * The SPARC can not do unaligned accesses, it must be split into multiple
- * byte accesses. The SPARC is in big endian mode.
- */
-#include <asm-generic/unaligned.h>
-
-#endif /* _ASM_SPARC_UNALIGNED_H */
+++ /dev/null
-/*
- * Added to U-Boot,
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
- * Copyright (C) 2007
- *
- * LEON2/3 LIBIO low-level routines
- * Written by Jiri Gaisler.
- * Copyright (C) 2004 Gaisler Research AB
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SPARC_WINMACRO_H__
-#define __SPARC_WINMACRO_H__
-
-#include <asm/asmmacro.h>
-#include <asm/stack.h>
-
-/* Store the register window onto the 8-byte aligned area starting
- * at %reg. It might be %sp, it might not, we don't care.
- */
-#define RW_STORE(reg) \
- std %l0, [%reg + RW_L0]; \
- std %l2, [%reg + RW_L2]; \
- std %l4, [%reg + RW_L4]; \
- std %l6, [%reg + RW_L6]; \
- std %i0, [%reg + RW_I0]; \
- std %i2, [%reg + RW_I2]; \
- std %i4, [%reg + RW_I4]; \
- std %i6, [%reg + RW_I6];
-
-/* Load a register window from the area beginning at %reg. */
-#define RW_LOAD(reg) \
- ldd [%reg + RW_L0], %l0; \
- ldd [%reg + RW_L2], %l2; \
- ldd [%reg + RW_L4], %l4; \
- ldd [%reg + RW_L6], %l6; \
- ldd [%reg + RW_I0], %i0; \
- ldd [%reg + RW_I2], %i2; \
- ldd [%reg + RW_I4], %i4; \
- ldd [%reg + RW_I6], %i6;
-
-/* Loading and storing struct pt_reg trap frames. */
-#define PT_LOAD_INS(base_reg) \
- ldd [%base_reg + SF_REGS_SZ + PT_I0], %i0; \
- ldd [%base_reg + SF_REGS_SZ + PT_I2], %i2; \
- ldd [%base_reg + SF_REGS_SZ + PT_I4], %i4; \
- ldd [%base_reg + SF_REGS_SZ + PT_I6], %i6;
-
-#define PT_LOAD_GLOBALS(base_reg) \
- ld [%base_reg + SF_REGS_SZ + PT_G1], %g1; \
- ldd [%base_reg + SF_REGS_SZ + PT_G2], %g2; \
- ldd [%base_reg + SF_REGS_SZ + PT_G4], %g4; \
- ldd [%base_reg + SF_REGS_SZ + PT_G6], %g6;
-
-#define PT_LOAD_YREG(base_reg, scratch) \
- ld [%base_reg + SF_REGS_SZ + PT_Y], %scratch; \
- wr %scratch, 0x0, %y;
-
-#define PT_LOAD_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
- ld [%base_reg + SF_REGS_SZ + PT_PSR], %pt_psr; \
- ld [%base_reg + SF_REGS_SZ + PT_PC], %pt_pc; \
- ld [%base_reg + SF_REGS_SZ + PT_NPC], %pt_npc;
-
-#define PT_LOAD_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
- PT_LOAD_YREG(base_reg, scratch) \
- PT_LOAD_INS(base_reg) \
- PT_LOAD_GLOBALS(base_reg) \
- PT_LOAD_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
-
-#define PT_STORE_INS(base_reg) \
- std %i0, [%base_reg + SF_REGS_SZ + PT_I0]; \
- std %i2, [%base_reg + SF_REGS_SZ + PT_I2]; \
- std %i4, [%base_reg + SF_REGS_SZ + PT_I4]; \
- std %i6, [%base_reg + SF_REGS_SZ + PT_I6];
-
-#define PT_STORE_GLOBALS(base_reg) \
- st %g1, [%base_reg + SF_REGS_SZ + PT_G1]; \
- std %g2, [%base_reg + SF_REGS_SZ + PT_G2]; \
- std %g4, [%base_reg + SF_REGS_SZ + PT_G4]; \
- std %g6, [%base_reg + SF_REGS_SZ + PT_G6];
-
-#define PT_STORE_YREG(base_reg, scratch) \
- rd %y, %scratch; \
- st %scratch, [%base_reg + SF_REGS_SZ + PT_Y];
-
-#define PT_STORE_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
- st %pt_psr, [%base_reg + SF_REGS_SZ + PT_PSR]; \
- st %pt_pc, [%base_reg + SF_REGS_SZ + PT_PC]; \
- st %pt_npc, [%base_reg + SF_REGS_SZ + PT_NPC];
-
-#define PT_STORE_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
- PT_STORE_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
- PT_STORE_GLOBALS(base_reg) \
- PT_STORE_YREG(base_reg, g_scratch) \
- PT_STORE_INS(base_reg)
-
-/* Store the fpu register window*/
-#define FW_STORE(reg) \
- std %f0, [reg + FW_F0]; \
- std %f2, [reg + FW_F2]; \
- std %f4, [reg + FW_F4]; \
- std %f6, [reg + FW_F6]; \
- std %f8, [reg + FW_F8]; \
- std %f10, [reg + FW_F10]; \
- std %f12, [reg + FW_F12]; \
- std %f14, [reg + FW_F14]; \
- std %f16, [reg + FW_F16]; \
- std %f18, [reg + FW_F18]; \
- std %f20, [reg + FW_F20]; \
- std %f22, [reg + FW_F22]; \
- std %f24, [reg + FW_F24]; \
- std %f26, [reg + FW_F26]; \
- std %f28, [reg + FW_F28]; \
- std %f30, [reg + FW_F30]; \
- st %fsr, [reg + FW_FSR];
-
-/* Load a fpu register window from the area beginning at reg. */
-#define FW_LOAD(reg) \
- ldd [reg + FW_F0], %f0; \
- ldd [reg + FW_F2], %f2; \
- ldd [reg + FW_F4], %f4; \
- ldd [reg + FW_F6], %f6; \
- ldd [reg + FW_F8], %f8; \
- ldd [reg + FW_F10], %f10; \
- ldd [reg + FW_F12], %f12; \
- ldd [reg + FW_F14], %f14; \
- ldd [reg + FW_F16], %f16; \
- ldd [reg + FW_F18], %f18; \
- ldd [reg + FW_F20], %f20; \
- ldd [reg + FW_F22], %f22; \
- ldd [reg + FW_F24], %f24; \
- ldd [reg + FW_F26], %f26; \
- ldd [reg + FW_F28], %f28; \
- ldd [reg + FW_F30], %f30; \
- ld [reg + FW_FSR], %fsr;
-
-#endif
+++ /dev/null
-#
-# (C) Copyright 2000-2015
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = cache.o interrupts.o
-obj-$(CONFIG_CMD_BOOTM) += bootm.o
+++ /dev/null
-/* SPARC code for booting linux 2.6
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/byteorder.h>
-#include <asm/prom.h>
-#include <asm/cache.h>
-#include <image.h>
-
-#define PRINT_KERNEL_HEADER
-
-extern image_header_t header;
-extern void srmmu_init_cpu(unsigned int entry);
-extern void prepare_bootargs(char *bootargs);
-
-/* sparc kernel argument (the ROM vector) */
-struct linux_romvec *kernel_arg_promvec;
-
-/* page szie is 4k */
-#define PAGE_SIZE 0x1000
-#define RAMDISK_IMAGE_START_MASK 0x07FF
-#define RAMDISK_PROMPT_FLAG 0x8000
-#define RAMDISK_LOAD_FLAG 0x4000
-struct __attribute__ ((packed)) {
- char traptable[PAGE_SIZE];
- char swapper_pg_dir[PAGE_SIZE];
- char pg0[PAGE_SIZE];
- char pg1[PAGE_SIZE];
- char pg2[PAGE_SIZE];
- char pg3[PAGE_SIZE];
- char empty_bad_page[PAGE_SIZE];
- char empty_bad_page_table[PAGE_SIZE];
- char empty_zero_page[PAGE_SIZE];
- unsigned char hdr[4]; /* ascii "HdrS" */
- /* 00.02.06.0b is for Linux kernel 2.6.11 */
- unsigned char linuxver_mega_major;
- unsigned char linuxver_major;
- unsigned char linuxver_minor;
- unsigned char linuxver_revision;
- /* header version 0x0203 */
- unsigned short hdr_ver;
- union __attribute__ ((packed)) {
- struct __attribute__ ((packed)) {
- unsigned short root_flags;
- unsigned short root_dev;
- unsigned short ram_flags;
- unsigned int sparc_ramdisk_image;
- unsigned int sparc_ramdisk_size;
- unsigned int reboot_command;
- unsigned int resv[3];
- unsigned int end;
- } ver_0203;
- } hdr_input;
-} *linux_hdr;
-
-/* temporary initrd image holder */
-image_header_t ihdr;
-
-void arch_lmb_reserve(struct lmb *lmb)
-{
- /* Reserve the space used by PROM and stack. This is done
- * to avoid that the RAM image is copied over stack or
- * PROM.
- */
- lmb_reserve(lmb, CONFIG_SYS_RELOC_MONITOR_BASE, CONFIG_SYS_RAM_END);
-}
-
-/* boot the linux kernel */
-int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t * images)
-{
- char *bootargs;
- ulong rd_len;
- void (*kernel) (struct linux_romvec *, void *);
- int ret;
-
- /*
- * allow the PREP bootm subcommand, it is required for bootm to work
- */
- if (flag & BOOTM_STATE_OS_PREP)
- return 0;
-
- if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
- return 1;
-
- /* Get virtual address of kernel start */
- linux_hdr = (void *)images->os.load;
-
- /* */
- kernel = (void (*)(struct linux_romvec *, void *))images->ep;
-
- /* check for a SPARC kernel */
- if ((linux_hdr->hdr[0] != 'H') ||
- (linux_hdr->hdr[1] != 'd') ||
- (linux_hdr->hdr[2] != 'r') || (linux_hdr->hdr[3] != 'S')) {
- puts("Error reading header of SPARC Linux kernel, aborting\n");
- goto error;
- }
-#ifdef PRINT_KERNEL_HEADER
- printf("## Found SPARC Linux kernel %d.%d.%d ...\n",
- linux_hdr->linuxver_major,
- linux_hdr->linuxver_minor, linux_hdr->linuxver_revision);
-#endif
-
- /* set basic boot params in kernel header now that it has been
- * extracted and is writeable.
- */
-
- ret = image_setup_linux(images);
- if (ret) {
- puts("### Failed to relocate RAM disk\n");
- goto error;
- }
-
- /* Calc length of RAM disk, if zero no ramdisk available */
- rd_len = images->rd_end - images->rd_start;
-
- if (rd_len) {
- /* Update SPARC kernel header so that Linux knows
- * what is going on and where to find RAM disk.
- *
- * Set INITRD Image address relative to RAM Start
- */
- linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image =
- images->initrd_start - CONFIG_SYS_RAM_BASE;
- linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = rd_len;
- /* Clear READ ONLY flag if set to non-zero */
- linux_hdr->hdr_input.ver_0203.root_flags = 1;
- /* Set root device to: Root_RAM0 */
- linux_hdr->hdr_input.ver_0203.root_dev = 0x100;
- linux_hdr->hdr_input.ver_0203.ram_flags = 0;
- } else {
- /* NOT using RAMDISK image, overwriting kernel defaults */
- linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image = 0;
- linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = 0;
- /* Leave to kernel defaults
- linux_hdr->hdr_input.ver_0203.root_flags = 1;
- linux_hdr->hdr_input.ver_0203.root_dev = 0;
- linux_hdr->hdr_input.ver_0203.ram_flags = 0;
- */
- }
-
- /* Copy bootargs from bootargs variable to kernel readable area */
- bootargs = getenv("bootargs");
- prepare_bootargs(bootargs);
-
- /* turn on mmu & setup context table & page table for process 0 (kernel) */
- srmmu_init_cpu((unsigned int)kernel);
-
- /* Enter SPARC Linux kernel
- * From now on the only code in u-boot that will be
- * executed is the PROM code.
- */
- kernel(kernel_arg_promvec, (void *)images->ep);
-
- /* It will never come to this... */
- while (1) ;
-
- error:
- return 1;
-}
+++ /dev/null
-/* Sparc cache library
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-void flush_cache(ulong start_addr, ulong size)
-{
- /* Flush All Cache */
- sparc_dcache_flush_all();
- sparc_icache_flush_all();
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov@mrv.com>
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-
-/* Implemented by SPARC CPUs */
-extern int interrupt_init_cpu(void);
-extern void timer_interrupt_cpu(void *arg);
-extern int timer_interrupt_init_cpu(void);
-
-int intLock(void)
-{
- unsigned int pil;
-
- pil = get_pil();
-
- /* set PIL to 15 ==> no pending interrupts will interrupt CPU */
- set_pil(15);
-
- return pil;
-}
-
-void intUnlock(int oldLevel)
-{
- set_pil(oldLevel);
-}
-
-void enable_interrupts(void)
-{
- set_pil(0); /* enable all interrupts */
-}
-
-int disable_interrupts(void)
-{
- return intLock();
-}
-
-int interrupt_is_enabled(void)
-{
- if (get_pil() == 15)
- return 0;
- return 1;
-}
-
-int interrupt_init(void)
-{
- int ret;
-
- /* call cpu specific function from $(CPU)/interrupts.c */
- ret = interrupt_init_cpu();
-
- /* enable global interrupts */
- enable_interrupts();
-
- return ret;
-}
menu "Misc commands"
-config CMD_AMBAPP
- bool "ambapp"
- depends on LEON3
- default y
- help
- Lists AMBA Plug-n-Play information.
-
-config SYS_AMBAPP_PRINT_ON_STARTUP
- bool "Show AMBA PnP info on startup"
- depends on CMD_AMBAPP
- default n
- help
- Show AMBA Plug-n-Play information on startup.
-
config CMD_BKOPS_ENABLE
bool "mmc bkops enable"
depends on CMD_MMC
# command
obj-$(CONFIG_CMD_AES) += aes.o
-obj-$(CONFIG_CMD_AMBAPP) += ambapp.o
obj-$(CONFIG_CMD_ARMFLASH) += armflash.o
obj-$(CONFIG_SOURCE) += source.o
obj-$(CONFIG_CMD_SOURCE) += source.o
+++ /dev/null
-/*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * AMBA Plug&Play information list command
- *
- */
-#include <common.h>
-#include <command.h>
-#include <ambapp.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-typedef struct {
- int device_id;
- char *name;
- char *desc;
-} ambapp_device_name;
-
-typedef struct {
- unsigned int vendor_id;
- char *name;
- char *desc;
- ambapp_device_name *devices;
-} ambapp_vendor_devnames;
-
-/** Vendor GAISLER devices */
-static ambapp_device_name GAISLER_devices[] = {
- {GAISLER_LEON2DSU, "LEON2DSU", "Leon2 Debug Support Unit"},
- {GAISLER_LEON3, "LEON3", "Leon3 SPARC V8 Processor"},
- {GAISLER_LEON3DSU, "LEON3DSU", "Leon3 Debug Support Unit"},
- {GAISLER_ETHAHB, "ETHAHB", "OC ethernet AHB interface"},
- {GAISLER_APBMST, "APBMST", "AHB/APB Bridge"},
- {GAISLER_AHBUART, "AHBUART", "AHB Debug UART"},
- {GAISLER_SRCTRL, "SRCTRL", "Simple SRAM Controller"},
- {GAISLER_SDCTRL, "SDCTRL", "PC133 SDRAM Controller"},
- {GAISLER_SSRCTRL, "SSRCTRL", "Synchronous SRAM Controller"},
- {GAISLER_APBUART, "APBUART", "Generic UART"},
- {GAISLER_IRQMP, "IRQMP", "Multi-processor Interrupt Ctrl."},
- {GAISLER_AHBRAM, "AHBRAM", "Single-port AHB SRAM module"},
- {GAISLER_AHBDPRAM, "AHBDPRAM", "Dual-port AHB SRAM module"},
- {GAISLER_GPTIMER, "GPTIMER", "Modular Timer Unit"},
- {GAISLER_PCITRG, "PCITRG", "Simple 32-bit PCI Target"},
- {GAISLER_PCISBRG, "PCISBRG", "Simple 32-bit PCI Bridge"},
- {GAISLER_PCIFBRG, "PCIFBRG", "Fast 32-bit PCI Bridge"},
- {GAISLER_PCITRACE, "PCITRACE", "32-bit PCI Trace Buffer"},
- {GAISLER_DMACTRL, "DMACTRL", "AMBA DMA controller"},
- {GAISLER_AHBTRACE, "AHBTRACE", "AMBA Trace Buffer"},
- {GAISLER_DSUCTRL, "DSUCTRL", "DSU/ETH controller"},
- {GAISLER_CANAHB, "CANAHB", "OC CAN AHB interface"},
- {GAISLER_GPIO, "GPIO", "General Purpose I/O port"},
- {GAISLER_AHBROM, "AHBROM", "Generic AHB ROM"},
- {GAISLER_AHBJTAG, "AHBJTAG", "JTAG Debug Link"},
- {GAISLER_ETHMAC, "ETHMAC", "GR Ethernet MAC"},
- {GAISLER_SWNODE, "SWNODE", "SpaceWire Node Interface"},
- {GAISLER_SPW, "SPW", "SpaceWire Serial Link"},
- {GAISLER_AHB2AHB, "AHB2AHB", "AHB-to-AHB Bridge"},
- {GAISLER_USBDC, "USBDC", "GR USB 2.0 Device Controller"},
- {GAISLER_USB_DCL, "USB_DCL", "USB Debug Communication Link"},
- {GAISLER_DDRMP, "DDRMP", "Multi-port DDR controller"},
- {GAISLER_ATACTRL, "ATACTRL", "ATA controller"},
- {GAISLER_DDRSP, "DDRSP", "Single-port DDR266 controller"},
- {GAISLER_EHCI, "EHCI", "USB Enhanced Host Controller"},
- {GAISLER_UHCI, "UHCI", "USB Universal Host Controller"},
- {GAISLER_I2CMST, "I2CMST", "AMBA Wrapper for OC I2C-master"},
- {GAISLER_SPW2, "SPW2", "GRSPW2 SpaceWire Serial Link"},
- {GAISLER_AHBDMA, "AHBDMA", ""},
- {GAISLER_NUHOSP3, "NUHOSP3", "Nuhorizons Spartan3 IO I/F"},
- {GAISLER_CLKGATE, "CLKGATE", "Clock gating unit"},
- {GAISLER_SPICTRL, "SPICTRL", "SPI Controller"},
- {GAISLER_DDR2SP, "DDR2SP", "Single-port DDR2 controller"},
- {GAISLER_SLINK, "SLINK", "SLINK Master"},
- {GAISLER_GRTM, "GRTM", "CCSDS Telemetry Encoder"},
- {GAISLER_GRTC, "GRTC", "CCSDS Telecommand Decoder"},
- {GAISLER_GRPW, "GRPW", "PacketWire to AMBA AHB I/F"},
- {GAISLER_GRCTM, "GRCTM", "CCSDS Time Manager"},
- {GAISLER_GRHCAN, "GRHCAN", "ESA HurriCANe CAN with DMA"},
- {GAISLER_GRFIFO, "GRFIFO", "FIFO Controller"},
- {GAISLER_GRADCDAC, "GRADCDAC", "ADC / DAC Interface"},
- {GAISLER_GRPULSE, "GRPULSE", "General Purpose I/O with Pulses"},
- {GAISLER_GRTIMER, "GRTIMER", "Timer Unit with Latches"},
- {GAISLER_AHB2PP, "AHB2PP", "AMBA AHB to Packet Parallel I/F"},
- {GAISLER_GRVERSION, "GRVERSION", "Version and Revision Register"},
- {GAISLER_APB2PW, "APB2PW", "PacketWire Transmit Interface"},
- {GAISLER_PW2APB, "PW2APB", "PacketWire Receive Interface"},
- {GAISLER_GRCAN, "GRCAN", "CAN Controller with DMA"},
- {GAISLER_I2CSLV, "I2CSLV", "I2C Slave"},
- {GAISLER_U16550, "U16550", "Simple 16550 UART"},
- {GAISLER_AHBMST_EM, "AHBMST_EM", "AMBA Master Emulator"},
- {GAISLER_AHBSLV_EM, "AHBSLV_EM", "AMBA Slave Emulator"},
- {GAISLER_GRTESTMOD, "GRTESTMOD", "Test report module"},
- {GAISLER_ASCS, "ASCS", "ASCS Master"},
- {GAISLER_IPMVBCTRL, "IPMVBCTRL", "IPM-bus/MVBC memory controller"},
- {GAISLER_SPIMCTRL, "SPIMCTRL", "SPI Memory Controller"},
- {GAISLER_L4STAT, "L4STAT", "Leon4 Statistics Module"},
- {GAISLER_LEON4, "LEON4", "Leon4 SPARC V8 Processor"},
- {GAISLER_LEON4DSU, "LEON4DSU", "Leon4 Debug Support Unit"},
- {GAISLER_PWM, "PWM", "PWM generator"},
- {GAISLER_L2CACHE, "L2CACHE", "L2-Cache Controller"},
- {GAISLER_SDCTRL64, "SDCTRL64", "64-bit PC133 SDRAM Controller"},
- {GAISLER_GR1553B, "GR1553B", "MIL-STD-1553B Interface"},
- {GAISLER_1553TST, "1553TST", "MIL-STD-1553B Test Device"},
- {GAISLER_GRIOMMU, "GRIOMMU", "I/O Memory Management Unit"},
- {GAISLER_FTAHBRAM, "FTAHBRAM", "Generic FT AHB SRAM module"},
- {GAISLER_FTSRCTRL, "FTSRCTRL", "Simple FT SRAM Controller"},
- {GAISLER_AHBSTAT, "AHBSTAT", "AHB Status Register"},
- {GAISLER_LEON3FT, "LEON3FT", "Leon3-FT SPARC V8 Processor"},
- {GAISLER_FTMCTRL, "FTMCTRL", "Memory controller with EDAC"},
- {GAISLER_FTSDCTRL, "FTSDCTRL", "FT PC133 SDRAM Controller"},
- {GAISLER_FTSRCTRL8, "FTSRCTRL8", "FT 8-bit SRAM/16-bit IO Ctrl"},
- {GAISLER_MEMSCRUB, "MEMSCRUB", "AHB Memory Scrubber"},
- {GAISLER_FTSDCTRL64, "FTSDCTRL64", "64-bit FT SDRAM Controller"},
- {GAISLER_APBPS2, "APBPS2", "PS2 interface"},
- {GAISLER_VGACTRL, "VGACTRL", "VGA controller"},
- {GAISLER_LOGAN, "LOGAN", "On chip Logic Analyzer"},
- {GAISLER_SVGACTRL, "SVGACTRL", "SVGA frame buffer"},
- {GAISLER_T1AHB, "T1AHB", "Niagara T1 PCX/AHB bridge"},
- {GAISLER_MP7WRAP, "MP7WRAP", "CoreMP7 wrapper"},
- {GAISLER_GRSYSMON, "GRSYSMON", "AMBA wrapper for System Monitor"},
- {GAISLER_GRACECTRL, "GRACECTRL", "System ACE I/F Controller"},
- {GAISLER_ATAHBSLV, "ATAHBSLV", "AMBA Test Framework AHB Slave"},
- {GAISLER_ATAHBMST, "ATAHBMST", "AMBA Test Framework AHB Master"},
- {GAISLER_ATAPBSLV, "ATAPBSLV", "AMBA Test Framework APB Slave"},
- {GAISLER_B1553BC, "B1553BC", "AMBA Wrapper for Core1553BBC"},
- {GAISLER_B1553RT, "B1553RT", "AMBA Wrapper for Core1553BRT"},
- {GAISLER_B1553BRM, "B1553BRM", "AMBA Wrapper for Core1553BRM"},
- {GAISLER_AES, "AES", "Advanced Encryption Standard"},
- {GAISLER_ECC, "ECC", "Elliptic Curve Cryptography"},
- {GAISLER_PCIF, "PCIF", "AMBA Wrapper for CorePCIF"},
- {GAISLER_CLKMOD, "CLKMOD", "CPU Clock Switching Ctrl module"},
- {GAISLER_HAPSTRAK, "HAPSTRAK", "HAPS HapsTrak I/O Port"},
- {GAISLER_TEST_1X2, "TEST_1X2", "HAPS TEST_1x2 interface"},
- {GAISLER_WILD2AHB, "WILD2AHB", "WildCard CardBus interface"},
- {GAISLER_BIO1, "BIO1", "Basic I/O board BIO1"},
- {GAISLER_AESDMA, "AESDMA", "AES 256 DMA"},
- {GAISLER_SATCAN, "SATCAN", "SatCAN controller"},
- {GAISLER_CANMUX, "CANMUX", "CAN Bus multiplexer"},
- {GAISLER_GRTMRX, "GRTMRX", "CCSDS Telemetry Receiver"},
- {GAISLER_GRTCTX, "GRTCTX", "CCSDS Telecommand Transmitter"},
- {GAISLER_GRTMDESC, "GRTMDESC", "CCSDS Telemetry Descriptor"},
- {GAISLER_GRTMVC, "GRTMVC", "CCSDS Telemetry VC Generator"},
- {GAISLER_GEFFE, "GEFFE", "Geffe Generator"},
- {GAISLER_GPREG, "GPREG", "General Purpose Register"},
- {GAISLER_GRTMPAHB, "GRTMPAHB", "CCSDS Telemetry VC AHB Input"},
- {GAISLER_SPWCUC, "SPWCUC", "CCSDS CUC / SpaceWire I/F"},
- {GAISLER_SPW2_DMA, "SPW2_DMA", "GRSPW Router DMA interface"},
- {GAISLER_SPWROUTER, "SPWROUTER", "GRSPW Router"},
- {0, NULL, NULL}
-};
-
-
-/** Vendor PENDER devices */
-static ambapp_device_name PENDER_devices[] = {
- {0, NULL, NULL}
-};
-
-
-/** Vendor ESA devices */
-static ambapp_device_name ESA_devices[] = {
- {ESA_LEON2, "LEON2", "Leon2 SPARC V8 Processor"},
- {ESA_LEON2APB, "LEON2APB", "Leon2 Peripheral Bus"},
- {ESA_IRQ, "IRQ", "Leon2 Interrupt Controller"},
- {ESA_TIMER, "TIMER", "Leon2 Timer"},
- {ESA_UART, "UART", "Leon2 UART"},
- {ESA_CFG, "CFG", "Leon2 Configuration Register"},
- {ESA_IO, "IO", "Leon2 Input/Output"},
- {ESA_MCTRL, "MCTRL", "Leon2 Memory Controller"},
- {ESA_PCIARB, "PCIARB", "PCI Arbiter"},
- {ESA_HURRICANE, "HURRICANE", "HurriCANe/HurryAMBA CAN Ctrl"},
- {ESA_SPW_RMAP, "SPW_RMAP", "UoD/Saab SpaceWire/RMAP link"},
- {ESA_AHBUART, "AHBUART", "Leon2 AHB Debug UART"},
- {ESA_SPWA, "SPWA", "ESA/ASTRIUM SpaceWire link"},
- {ESA_BOSCHCAN, "BOSCHCAN", "SSC/BOSCH CAN Ctrl"},
- {ESA_IRQ2, "IRQ2", "Leon2 Secondary Irq Controller"},
- {ESA_AHBSTAT, "AHBSTAT", "Leon2 AHB Status Register"},
- {ESA_WPROT, "WPROT", "Leon2 Write Protection"},
- {ESA_WPROT2, "WPROT2", "Leon2 Extended Write Protection"},
- {ESA_PDEC3AMBA, "PDEC3AMBA", "ESA CCSDS PDEC3AMBA TC Decoder"},
- {ESA_PTME3AMBA, "PTME3AMBA", "ESA CCSDS PTME3AMBA TM Encoder"},
- {0, NULL, NULL}
-};
-
-
-/** Vendor ASTRIUM devices */
-static ambapp_device_name ASTRIUM_devices[] = {
- {0, NULL, NULL}
-};
-
-
-/** Vendor OPENCHIP devices */
-static ambapp_device_name OPENCHIP_devices[] = {
- {OPENCHIP_APBGPIO, "APBGPIO", "APB General Purpose IO"},
- {OPENCHIP_APBI2C, "APBI2C", "APB I2C Interface"},
- {OPENCHIP_APBSPI, "APBSPI", "APB SPI Interface"},
- {OPENCHIP_APBCHARLCD, "APBCHARLCD", "APB Character LCD"},
- {OPENCHIP_APBPWM, "APBPWM", "APB PWM"},
- {OPENCHIP_APBPS2, "APBPS2", "APB PS/2 Interface"},
- {OPENCHIP_APBMMCSD, "APBMMCSD", "APB MMC/SD Card Interface"},
- {OPENCHIP_APBNAND, "APBNAND", "APB NAND(SmartMedia) Interface"},
- {OPENCHIP_APBLPC, "APBLPC", "APB LPC Interface"},
- {OPENCHIP_APBCF, "APBCF", "APB CompactFlash (IDE)"},
- {OPENCHIP_APBSYSACE, "APBSYSACE", "APB SystemACE Interface"},
- {OPENCHIP_APB1WIRE, "APB1WIRE", "APB 1-Wire Interface"},
- {OPENCHIP_APBJTAG, "APBJTAG", "APB JTAG TAP Master"},
- {OPENCHIP_APBSUI, "APBSUI", "APB Simple User Interface"},
- {0, NULL, NULL}
-};
-
-
-/** Vendor OPENCORES devices */
-static ambapp_device_name OPENCORES_devices[] = {
- {OPENCORES_PCIBR, "PCIBR", "PCI Bridge"},
- {OPENCORES_ETHMAC, "ETHMAC", "Ethernet MAC"},
- {0, NULL}
-};
-
-
-/** Vendor CONTRIB devices */
-static ambapp_device_name CONTRIB_devices[] = {
- {CONTRIB_CORE1, "CORE1", "Contributed core 1"},
- {CONTRIB_CORE2, "CORE2", "Contributed core 2"},
- {0, NULL, NULL}
-};
-
-
-/** Vendor EONIC devices */
-static ambapp_device_name EONIC_devices[] = {
- {0, NULL, NULL}
-};
-
-
-/** Vendor RADIONOR devices */
-static ambapp_device_name RADIONOR_devices[] = {
- {0, NULL, NULL}
-};
-
-
-/** Vendor GLEICHMANN devices */
-static ambapp_device_name GLEICHMANN_devices[] = {
- {GLEICHMANN_CUSTOM, "CUSTOM", "Custom device"},
- {GLEICHMANN_GEOLCD01, "GEOLCD01", "GEOLCD01 graphics system"},
- {GLEICHMANN_DAC, "DAC", "Sigma delta DAC"},
- {GLEICHMANN_HPI, "HPI", "AHB-to-HPI bridge"},
- {GLEICHMANN_SPI, "SPI", "SPI master"},
- {GLEICHMANN_HIFC, "HIFC", "Human interface controller"},
- {GLEICHMANN_ADCDAC, "ADCDAC", "Sigma delta ADC/DAC"},
- {GLEICHMANN_SPIOC, "SPIOC", ""},
- {GLEICHMANN_AC97, "AC97", ""},
- {0, NULL, NULL}
-};
-
-
-/** Vendor MENTA devices */
-static ambapp_device_name MENTA_devices[] = {
- {0, NULL, NULL}
-};
-
-
-/** Vendor SUN devices */
-static ambapp_device_name SUN_devices[] = {
- {SUN_T1, "T1", "Niagara T1 SPARC V9 Processor"},
- {SUN_S1, "S1", "Niagara S1 SPARC V9 Processor"},
- {0, NULL, NULL}
-};
-
-
-/** Vendor MOVIDIA devices */
-static ambapp_device_name MOVIDIA_devices[] = {
- {0, NULL, NULL}
-};
-
-
-/** Vendor ORBITA devices */
-static ambapp_device_name ORBITA_devices[] = {
- {ORBITA_1553B, "1553B", "MIL-STD-1553B Controller"},
- {ORBITA_429, "429", "429 Interface"},
- {ORBITA_SPI, "SPI", "SPI Interface"},
- {ORBITA_I2C, "I2C", "I2C Interface"},
- {ORBITA_SMARTCARD, "SMARTCARD", "Smart Card Reader"},
- {ORBITA_SDCARD, "SDCARD", "SD Card Reader"},
- {ORBITA_UART16550, "UART16550", "16550 UART"},
- {ORBITA_CRYPTO, "CRYPTO", "Crypto Engine"},
- {ORBITA_SYSIF, "SYSIF", "System Interface"},
- {ORBITA_PIO, "PIO", "Programmable IO module"},
- {ORBITA_RTC, "RTC", "Real-Time Clock"},
- {ORBITA_COLORLCD, "COLORLCD", "Color LCD Controller"},
- {ORBITA_PCI, "PCI", "PCI Module"},
- {ORBITA_DSP, "DSP", "DPS Co-Processor"},
- {ORBITA_USBHOST, "USBHOST", "USB Host"},
- {ORBITA_USBDEV, "USBDEV", "USB Device"},
- {0, NULL, NULL}
-};
-
-
-/** Vendor SYNOPSYS devices */
-static ambapp_device_name SYNOPSYS_devices[] = {
- {0, NULL, NULL}
-};
-
-
-/** Vendor NASA devices */
-static ambapp_device_name NASA_devices[] = {
- {NASA_EP32, "EP32", "EP32 Forth processor"},
- {0, NULL, NULL}
-};
-
-
-/** Vendor CAL devices */
-static ambapp_device_name CAL_devices[] = {
- {CAL_DDRCTRL, "DDRCTRL", ""},
- {0, NULL, NULL}
-};
-
-
-/** Vendor EMBEDDIT devices */
-static ambapp_device_name EMBEDDIT_devices[] = {
- {0, NULL, NULL}
-};
-
-
-/** Vendor CETON devices */
-static ambapp_device_name CETON_devices[] = {
- {0, NULL, NULL}
-};
-
-
-/** Vendor S3 devices */
-static ambapp_device_name S3_devices[] = {
- {0, NULL, NULL}
-};
-
-
-/** Vendor ACTEL devices */
-static ambapp_device_name ACTEL_devices[] = {
- {ACTEL_COREMP7, "COREMP7", "CoreMP7 Processor"},
- {0, NULL, NULL}
-};
-
-
-/** Vendor APPLECORE devices */
-static ambapp_device_name APPLECORE_devices[] = {
- {APPLECORE_UTLEON3, "UTLEON3", "AppleCore uT-LEON3 Processor"},
- {APPLECORE_UTLEON3DSU, "UTLEON3DSU", "AppleCore uT-LEON3 DSU"},
- {0, NULL, NULL}
-};
-
-
-/** Vendors and their devices */
-static ambapp_vendor_devnames vendors[] = {
- {VENDOR_GAISLER, "GAISLER", "Gaisler Research", GAISLER_devices},
- {VENDOR_PENDER, "PENDER", "", PENDER_devices},
- {VENDOR_ESA, "ESA", "European Space Agency", ESA_devices},
- {VENDOR_ASTRIUM, "ASTRIUM", "", ASTRIUM_devices},
- {VENDOR_OPENCHIP, "OPENCHIP", "OpenChip", OPENCHIP_devices},
- {VENDOR_OPENCORES, "OPENCORES", "OpenCores", OPENCORES_devices},
- {VENDOR_CONTRIB, "CONTRIB", "Various contributions", CONTRIB_devices},
- {VENDOR_EONIC, "EONIC", "Eonic BV", EONIC_devices},
- {VENDOR_RADIONOR, "RADIONOR", "Radionor Communications", RADIONOR_devices},
- {VENDOR_GLEICHMANN, "GLEICHMANN", "Gleichmann Electronics", GLEICHMANN_devices},
- {VENDOR_MENTA, "MENTA", "Menta", MENTA_devices},
- {VENDOR_SUN, "SUN", "Sun Microsystems", SUN_devices},
- {VENDOR_MOVIDIA, "MOVIDIA", "", MOVIDIA_devices},
- {VENDOR_ORBITA, "ORBITA", "Orbita", ORBITA_devices},
- {VENDOR_SYNOPSYS, "SYNOPSYS", "Synopsys Inc.", SYNOPSYS_devices},
- {VENDOR_NASA, "NASA", "NASA", NASA_devices},
- {VENDOR_S3, "S3", "S3 Group", S3_devices},
- {VENDOR_CAL, "CAL", "", CAL_devices},
- {VENDOR_EMBEDDIT, "EMBEDDIT", "Embedd.it", EMBEDDIT_devices},
- {VENDOR_CETON, "CETON", "Ceton Corporation", CETON_devices},
- {VENDOR_ACTEL, "ACTEL", "Actel Corporation", ACTEL_devices},
- {VENDOR_APPLECORE, "APPLECORE", "AppleCore", APPLECORE_devices},
- {0, NULL, NULL, NULL}
-};
-
-static ambapp_device_name *ambapp_get_dev(ambapp_device_name *devs, int id)
-{
- if (!devs)
- return NULL;
-
- while (devs->device_id > 0) {
- if (devs->device_id == id)
- return devs;
- devs++;
- }
- return NULL;
-}
-
-char *ambapp_device_id2str(int vendor, int id)
-{
- ambapp_vendor_devnames *ven = &vendors[0];
- ambapp_device_name *dev;
-
- while (ven->vendor_id > 0) {
- if (ven->vendor_id == vendor) {
- dev = ambapp_get_dev(ven->devices, id);
- if (!dev)
- return NULL;
- return dev->name;
- }
- ven++;
- }
- return NULL;
-}
-
-char *ambapp_device_id2desc(int vendor, int id)
-{
- ambapp_vendor_devnames *ven = &vendors[0];
- ambapp_device_name *dev;
-
- while (ven->vendor_id > 0) {
- if (ven->vendor_id == vendor) {
- dev = ambapp_get_dev(ven->devices, id);
- if (!dev)
- return NULL;
- return dev->desc;
- }
- ven++;
- }
- return NULL;
-}
-
-char *ambapp_vendor_id2str(int vendor)
-{
- ambapp_vendor_devnames *ven = &vendors[0];
-
- while (ven->vendor_id > 0) {
- if (ven->vendor_id == vendor) {
- return ven->name;
- }
- ven++;
- }
- return NULL;
-}
-
-static char *unknown = "unknown";
-
-char *ambapp_type_names[4] = {
- /* 0 */ "UNUSED",
- /* 1 */ "apb",
- /* 2 */ "ahbmem",
- /* 3 */ "ahbio"
-};
-
-/* Print one APB device */
-void ambapp_print_apb(ambapp_apbdev *dev, int index)
-{
- char *dev_str, *ven_str;
- unsigned int freq;
-
- ven_str = ambapp_vendor_id2str(dev->vendor);
- if (!ven_str) {
- ven_str = unknown;
- dev_str = unknown;
- } else {
- dev_str = ambapp_device_id2str(dev->vendor, dev->device);
- if (!dev_str)
- dev_str = unknown;
- }
-
- /* Get Frequency of Core */
- freq = ambapp_bus_freq(&ambapp_plb, dev->ahb_bus_index);
-
- printf("0x%02x:0x%02x:0x%02x: %s %s (%dkHz)\n"
- " apb: 0x%08x - 0x%08x\n"
- " irq: %-2d (ver: %-2d)\n",
- index, dev->vendor, dev->device, ven_str, dev_str, freq / 1000,
- dev->address, dev->address + (dev->mask-1),
- dev->irq, dev->ver);
-}
-
-void ambapp_print_ahb(ambapp_ahbdev *dev, int index)
-{
- char *dev_str, *ven_str, *type_str;
- int i;
- unsigned int freq;
-
- ven_str = ambapp_vendor_id2str(dev->vendor);
- if (!ven_str) {
- ven_str = unknown;
- dev_str = unknown;
- } else {
- dev_str = ambapp_device_id2str(dev->vendor, dev->device);
- if (!dev_str)
- dev_str = unknown;
- }
-
- /* Get Frequency of Core */
- freq = ambapp_bus_freq(&ambapp_plb, dev->ahb_bus_index);
-
- printf("0x%02x:0x%02x:0x%02x: %s %s (%dkHz)\n",
- index, dev->vendor, dev->device, ven_str, dev_str, freq / 1000);
-
- for (i = 0; i < 4; i++) {
- if (dev->type[i] == 0)
- continue;
- type_str = ambapp_type_names[dev->type[i]];
- printf(" %-7s: 0x%08x - 0x%08x\n", type_str, dev->address[i],
- dev->address[i] + (dev->mask[i]-1));
- }
-
- printf(" irq: %-2d (ver: %d)\n", dev->irq, dev->ver);
-}
-
-int do_ambapp_print(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- int index;
- ambapp_apbdev apbdev;
- ambapp_ahbdev ahbdev;
-
- /* Print AHB Masters */
- puts("\n--------- AHB Masters ---------\n");
- index = 0;
- while (ambapp_ahbmst_find(&ambapp_plb, 0, 0, index, &ahbdev) == 1) {
- /* Found a AHB Master Device */
- ambapp_print_ahb(&ahbdev, index);
- index++;
- }
-
- /* Print AHB Slaves */
- puts("\n--------- AHB Slaves ---------\n");
- index = 0;
- while (ambapp_ahbslv_find(&ambapp_plb, 0, 0, index, &ahbdev) == 1) {
- /* Found a AHB Slave Device */
- ambapp_print_ahb(&ahbdev, index);
- index++;
- }
-
- /* Print APB Slaves */
- puts("\n--------- APB Slaves ---------\n");
- index = 0;
- while (ambapp_apb_find(&ambapp_plb, 0, 0, index, &apbdev) == 1) {
- /* Found a APB Slave Device */
- ambapp_print_apb(&apbdev, index);
- index++;
- }
-
- puts("\n");
- return 0;
-}
-
-int ambapp_init_reloc(void)
-{
- ambapp_vendor_devnames *vend = vendors;
- ambapp_device_name *dev;
-
- while (vend->vendor_id && vend->name) {
- vend->name = (char *)((unsigned int)vend->name + gd->reloc_off);
- vend->desc = (char *)((unsigned int)vend->desc + gd->reloc_off);
- vend->devices = (ambapp_device_name *)
- ((unsigned int)vend->devices + gd->reloc_off);
- dev = vend->devices;
- vend++;
- if (!dev)
- continue;
- while (dev->device_id && dev->name) {
- dev->name =
- (char *)((unsigned int)dev->name + gd->reloc_off);
- dev->desc =
- (char *)((unsigned int)dev->desc + gd->reloc_off);
- dev++;
- }
- }
- return 0;
-}
-
-U_BOOT_CMD(
- ambapp, 1, 1, do_ambapp_print,
- "list AMBA Plug&Play information",
- "ambapp\n"
- " - lists AMBA (AHB & APB) Plug&Play devices present on the system"
-);
{
#if defined(CONFIG_PPC)
printf("baudrate = %6u bps\n", gd->baudrate);
-#elif defined(CONFIG_SPARC)
- printf("baudrate = %6u bps\n", gd->baudrate);
#else
printf("baudrate = %u bps\n", gd->baudrate);
#endif
return 0;
}
-#elif defined(CONFIG_SPARC)
-
-int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- bd_t *bd = gd->bd;
-
-#ifdef DEBUG
- print_num("bd address ", (ulong) bd);
-#endif
- print_num("memstart ", bd->bi_memstart);
- print_lnum("memsize ", bd->bi_memsize);
- print_num("flashstart ", bd->bi_flashstart);
- print_num("CONFIG_SYS_MONITOR_BASE ", CONFIG_SYS_MONITOR_BASE);
- print_num("CONFIG_ENV_ADDR ", CONFIG_ENV_ADDR);
- printf("CONFIG_SYS_RELOC_MONITOR_BASE = 0x%x (%d)\n", CONFIG_SYS_RELOC_MONITOR_BASE,
- CONFIG_SYS_MONITOR_LEN);
- printf("CONFIG_SYS_MALLOC_BASE = 0x%x (%d)\n", CONFIG_SYS_MALLOC_BASE,
- CONFIG_SYS_MALLOC_LEN);
- printf("CONFIG_SYS_INIT_SP_OFFSET = 0x%x (%d)\n", CONFIG_SYS_INIT_SP_OFFSET,
- CONFIG_SYS_STACK_SIZE);
- printf("CONFIG_SYS_PROM_OFFSET = 0x%x (%d)\n", CONFIG_SYS_PROM_OFFSET,
- CONFIG_SYS_PROM_SIZE);
- printf("CONFIG_SYS_GBL_DATA_OFFSET = 0x%x (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET,
- GENERATED_GBL_DATA_SIZE);
-
- print_eth_ip_addr();
- print_baudrate();
- return 0;
-}
-
#elif defined(CONFIG_M68K)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
config DISPLAY_BOARDINFO
bool "Display information about the board during start up"
- default y if ARM || M68K || MIPS || PPC || SPARC || XTENSA
+ default y if ARM || M68K || MIPS || PPC || XTENSA
help
Display information about the board that U-Boot is running on
when U-Boot starts up. The board function checkboard() is called
return 0;
}
-#if defined(CONFIG_SPARC)
-static int reserve_prom(void)
-{
- /* defined in arch/sparc/cpu/leon?/prom.c */
- extern void *__prom_start_reloc;
- int size = 8192; /* page table = 2k, prom = 6k */
- gd->relocaddr -= size;
- __prom_start_reloc = map_sysmem(gd->relocaddr + 2048, size - 2048);
- debug("Reserving %dk for PROM and page table at %08lx\n", size,
- gd->relocaddr);
- return 0;
-}
-#endif
-
#if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
static int reserve_logbuffer(void)
{
init_timebase,
#endif
#if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || \
- defined(CONFIG_NDS32) || defined(CONFIG_SH) || \
- defined(CONFIG_SPARC)
+ defined(CONFIG_NDS32) || defined(CONFIG_SH)
timer_init, /* initialize timer */
#endif
#if defined(CONFIG_BOARD_POSTCLK_INIT)
/* Blackfin u-boot monitor should be on top of the ram */
reserve_uboot,
#endif
-#if defined(CONFIG_SPARC)
- reserve_prom,
-#endif
#if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
reserve_logbuffer,
#endif
#include <timer.h>
#include <trace.h>
#include <watchdog.h>
-#ifdef CONFIG_CMD_AMBAPP
-#include <ambapp.h>
-#endif
#ifdef CONFIG_ADDR_MAP
#include <asm/mmu.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SPARC)
-extern int prom_init(void);
-#endif
-
ulong monitor_flash_len;
__weak int board_flash_wp_on(void)
}
#endif
-#if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
-extern int do_ambapp_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-
-static int initr_ambapp_print(void)
-{
- puts("AMBA:\n");
- do_ambapp_print(NULL, 0, 0, NULL);
-
- return 0;
-}
-#endif
-
#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI)
static int initr_scsi(void)
{
initr_flash,
#endif
INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_X86) || \
- defined(CONFIG_SPARC)
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_X86)
/* initialize higher level parts of CPU like time base and timers */
cpu_init_r,
#endif
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init,
#endif
-#if defined(CONFIG_CMD_AMBAPP)
- ambapp_init_reloc,
-#if defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
- initr_ambapp_print,
-#endif
-#endif
#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI)
INIT_FUNC_WATCHDOG_RESET
initr_scsi,
#endif
#ifdef CONFIG_PS2KBD
initr_kbd,
-#endif
-#if defined(CONFIG_SPARC)
- prom_init,
#endif
run_main_loop,
};
+++ /dev/null
-CONFIG_SPARC=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_IDENT_STRING=" Gaisler LEON3 GR-CPCI-AX2000"
-CONFIG_TARGET_GR_CPCI_AX2000=y
-CONFIG_BOOTDELAY=5
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_BAUDRATE=38400
+++ /dev/null
-CONFIG_SPARC=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_IDENT_STRING=" Gaisler LEON3 EP2S60"
-CONFIG_TARGET_GR_EP2S60=y
-CONFIG_BOOTDELAY=5
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_BAUDRATE=38400
+++ /dev/null
-CONFIG_SPARC=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_IDENT_STRING=" Gaisler LEON3 GR-XC3S-1500"
-CONFIG_TARGET_GR_XC3S_1500=y
-CONFIG_BOOTDELAY=5
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_BAUDRATE=38400
+++ /dev/null
-CONFIG_SPARC=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_IDENT_STRING=" Gaisler GRSIM"
-CONFIG_TARGET_GRSIM=y
-CONFIG_BOOTDELAY=5
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_SAVEENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_MEMORY is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP=y
-CONFIG_BAUDRATE=38400
-CONFIG_DEBUG_UART=y
-CONFIG_DEBUG_UART_APBUART=y
-CONFIG_DEBUG_UART_BASE=0x80000100
-CONFIG_DEBUG_UART_CLOCK=40000000
+++ /dev/null
-CONFIG_SPARC=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_IDENT_STRING=" Gaisler GRSIM LEON2"
-CONFIG_TARGET_GRSIM_LEON2=y
-CONFIG_BOOTDELAY=5
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_SAVEENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_MEMORY is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_BAUDRATE=38400
config MAC_PARTITION
bool "Enable Apple's MacOS partition table"
depends on PARTITIONS
- default y if SPARC
help
Say Y here if you would like to use device under U-Boot which
were partitioned on a Macintosh.
bool "Enable MS Dos partition table"
depends on PARTITIONS
default y if DISTRO_DEFAULTS
- default y if x86 || SPARC || CMD_FAT || USB_STORAGE
+ default y if x86 || CMD_FAT || USB_STORAGE
help
traditional on the Intel architecture, USB sticks, etc.
bool "Enable ISO partition table"
depends on PARTITIONS
default y if DISTRO_DEFAULTS
- default y if SPARC || MIPS || TEGRA
+ default y if MIPS || TEGRA
config SPL_ISO_PARTITION
bool "Enable ISO partition table for SPL"
obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC110) += ftmac110.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
-obj-$(CONFIG_GRETH) += greth.o
obj-$(CONFIG_GMAC_ROCKCHIP) += gmac_rockchip.o
obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
+++ /dev/null
-/* Gaisler.com GRETH 10/100/1000 Ethernet MAC driver
- *
- * Driver use polling mode (no Interrupt)
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <net.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <asm/processor.h>
-#include <ambapp.h>
-#include <asm/leon.h>
-
-#include <grlib/greth.h>
-
-/* Default to 3s timeout on autonegotiation */
-#ifndef GRETH_PHY_TIMEOUT_MS
-#define GRETH_PHY_TIMEOUT_MS 3000
-#endif
-
-/* Default to PHY adrress 0 not not specified */
-#ifdef CONFIG_SYS_GRLIB_GRETH_PHYADDR
-#define GRETH_PHY_ADR_DEFAULT CONFIG_SYS_GRLIB_GRETH_PHYADDR
-#else
-#define GRETH_PHY_ADR_DEFAULT 0
-#endif
-
-/* Let board select which GRETH to use as network interface, set
- * this to zero if only one GRETH is available.
- */
-#ifndef CONFIG_SYS_GRLIB_GRETH_INDEX
-#define CONFIG_SYS_GRLIB_GRETH_INDEX 0
-#endif
-
-/* ByPass Cache when reading regs */
-#define GRETH_REGLOAD(addr) SPARC_NOCACHE_READ(addr)
-/* Write-through cache ==> no bypassing needed on writes */
-#define GRETH_REGSAVE(addr,data) (*(volatile unsigned int *)(addr) = (data))
-#define GRETH_REGORIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)|data)
-#define GRETH_REGANDIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)&data)
-
-#define GRETH_RXBD_CNT 4
-#define GRETH_TXBD_CNT 1
-
-#define GRETH_RXBUF_SIZE 1540
-#define GRETH_BUF_ALIGN 4
-#define GRETH_RXBUF_EFF_SIZE \
- ( (GRETH_RXBUF_SIZE&~(GRETH_BUF_ALIGN-1))+GRETH_BUF_ALIGN )
-
-typedef struct {
- greth_regs *regs;
- int irq;
- struct eth_device *dev;
-
- /* Hardware info */
- unsigned char phyaddr;
- int gbit_mac;
-
- /* Current operating Mode */
- int gb; /* GigaBit */
- int fd; /* Full Duplex */
- int sp; /* 10/100Mbps speed (1=100,0=10) */
- int auto_neg; /* Auto negotiate done */
-
- unsigned char hwaddr[6]; /* MAC Address */
-
- /* Descriptors */
- greth_bd *rxbd_base, *rxbd_max;
- greth_bd *txbd_base, *txbd_max;
-
- greth_bd *rxbd_curr;
-
- /* rx buffers in rx descriptors */
- void *rxbuf_base; /* (GRETH_RXBUF_SIZE+ALIGNBYTES) * GRETH_RXBD_CNT */
-
- /* unused for gbit_mac, temp buffer for sending packets with unligned
- * start.
- * Pointer to packet allocated with malloc.
- */
- void *txbuf;
-
- struct {
- /* rx status */
- unsigned int rx_packets,
- rx_crc_errors, rx_frame_errors, rx_length_errors, rx_errors;
-
- /* tx stats */
- unsigned int tx_packets,
- tx_latecol_errors,
- tx_underrun_errors, tx_limit_errors, tx_errors;
- } stats;
-} greth_priv;
-
-/* Read MII register 'addr' from core 'regs' */
-static int read_mii(int phyaddr, int regaddr, volatile greth_regs * regs)
-{
- while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
- }
-
- GRETH_REGSAVE(®s->mdio, ((phyaddr & 0x1F) << 11) | ((regaddr & 0x1F) << 6) | 2);
-
- while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
- }
-
- if (!(GRETH_REGLOAD(®s->mdio) & GRETH_MII_NVALID)) {
- return (GRETH_REGLOAD(®s->mdio) >> 16) & 0xFFFF;
- } else {
- return -1;
- }
-}
-
-static void write_mii(int phyaddr, int regaddr, int data, volatile greth_regs * regs)
-{
- while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
- }
-
- GRETH_REGSAVE(®s->mdio,
- ((data & 0xFFFF) << 16) | ((phyaddr & 0x1F) << 11) |
- ((regaddr & 0x1F) << 6) | 1);
-
- while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
- }
-
-}
-
-/* init/start hardware and allocate descriptor buffers for rx side
- *
- */
-int greth_init(struct eth_device *dev, bd_t * bis)
-{
- int i;
-
- greth_priv *greth = dev->priv;
- greth_regs *regs = greth->regs;
-
- debug("greth_init\n");
-
- /* Reset core */
- GRETH_REGSAVE(®s->control, (GRETH_RESET | (greth->gb << 8) |
- (greth->sp << 7) | (greth->fd << 4)));
-
- /* Wait for Reset to complete */
- while ( GRETH_REGLOAD(®s->control) & GRETH_RESET) ;
-
- GRETH_REGSAVE(®s->control,
- ((greth->gb << 8) | (greth->sp << 7) | (greth->fd << 4)));
-
- if (!greth->rxbd_base) {
-
- /* allocate descriptors */
- greth->rxbd_base = (greth_bd *)
- memalign(0x1000, GRETH_RXBD_CNT * sizeof(greth_bd));
- greth->txbd_base = (greth_bd *)
- memalign(0x1000, GRETH_TXBD_CNT * sizeof(greth_bd));
-
- /* allocate buffers to all descriptors */
- greth->rxbuf_base =
- malloc(GRETH_RXBUF_EFF_SIZE * GRETH_RXBD_CNT);
- }
-
- /* initate rx decriptors */
- for (i = 0; i < GRETH_RXBD_CNT; i++) {
- greth->rxbd_base[i].addr = (unsigned int)
- greth->rxbuf_base + (GRETH_RXBUF_EFF_SIZE * i);
- /* enable desciptor & set wrap bit if last descriptor */
- if (i >= (GRETH_RXBD_CNT - 1)) {
- greth->rxbd_base[i].stat = GRETH_BD_EN | GRETH_BD_WR;
- } else {
- greth->rxbd_base[i].stat = GRETH_BD_EN;
- }
- }
-
- /* initiate indexes */
- greth->rxbd_curr = greth->rxbd_base;
- greth->rxbd_max = greth->rxbd_base + (GRETH_RXBD_CNT - 1);
- greth->txbd_max = greth->txbd_base + (GRETH_TXBD_CNT - 1);
- /*
- * greth->txbd_base->addr = 0;
- * greth->txbd_base->stat = GRETH_BD_WR;
- */
-
- /* initate tx decriptors */
- for (i = 0; i < GRETH_TXBD_CNT; i++) {
- greth->txbd_base[i].addr = 0;
- /* enable desciptor & set wrap bit if last descriptor */
- if (i >= (GRETH_TXBD_CNT - 1)) {
- greth->txbd_base[i].stat = GRETH_BD_WR;
- } else {
- greth->txbd_base[i].stat = 0;
- }
- }
-
- /**** SET HARDWARE REGS ****/
-
- /* Set pointer to tx/rx descriptor areas */
- GRETH_REGSAVE(®s->rx_desc_p, (unsigned int)&greth->rxbd_base[0]);
- GRETH_REGSAVE(®s->tx_desc_p, (unsigned int)&greth->txbd_base[0]);
-
- /* Enable Transmitter, GRETH will now scan descriptors for packets
- * to transmitt */
- debug("greth_init: enabling receiver\n");
- GRETH_REGORIN(®s->control, GRETH_RXEN);
-
- return 0;
-}
-
-/* Initiate PHY to a relevant speed
- * return:
- * - 0 = success
- * - 1 = timeout/fail
- */
-int greth_init_phy(greth_priv * dev, bd_t * bis)
-{
- greth_regs *regs = dev->regs;
- int tmp, tmp1, tmp2, i;
- unsigned int start, timeout;
- int phyaddr = GRETH_PHY_ADR_DEFAULT;
-
-#ifndef CONFIG_SYS_GRLIB_GRETH_PHYADDR
- /* If BSP doesn't provide a hardcoded PHY address the driver will
- * try to autodetect PHY address by stopping the search on the first
- * PHY address which has REG0 implemented.
- */
- for (i=0; i<32; i++) {
- tmp = read_mii(i, 0, regs);
- if ( (tmp != 0) && (tmp != 0xffff) ) {
- phyaddr = i;
- break;
- }
- }
-#endif
-
- /* Save PHY Address */
- dev->phyaddr = phyaddr;
-
- debug("GRETH PHY ADDRESS: %d\n", phyaddr);
-
- /* X msecs to ticks */
- timeout = GRETH_PHY_TIMEOUT_MS * 1000;
-
- /* Get system timer0 current value
- * Total timeout is 5s
- */
- start = get_timer(0);
-
- /* get phy control register default values */
-
- while ((tmp = read_mii(phyaddr, 0, regs)) & 0x8000) {
- if (get_timer(start) > timeout) {
- debug("greth_init_phy: PHY read 1 failed\n");
- return 1; /* Fail */
- }
- }
-
- /* reset PHY and wait for completion */
- write_mii(phyaddr, 0, 0x8000 | tmp, regs);
-
- while (((tmp = read_mii(phyaddr, 0, regs))) & 0x8000) {
- if (get_timer(start) > timeout) {
- debug("greth_init_phy: PHY read 2 failed\n");
- return 1; /* Fail */
- }
- }
-
- /* Check if PHY is autoneg capable and then determine operating
- * mode, otherwise force it to 10 Mbit halfduplex
- */
- dev->gb = 0;
- dev->fd = 0;
- dev->sp = 0;
- dev->auto_neg = 0;
- if (!((tmp >> 12) & 1)) {
- write_mii(phyaddr, 0, 0, regs);
- } else {
- /* wait for auto negotiation to complete and then check operating mode */
- dev->auto_neg = 1;
- i = 0;
- while (!(((tmp = read_mii(phyaddr, 1, regs)) >> 5) & 1)) {
- if (get_timer(start) > timeout) {
- printf("Auto negotiation timed out. "
- "Selecting default config\n");
- tmp = read_mii(phyaddr, 0, regs);
- dev->gb = ((tmp >> 6) & 1)
- && !((tmp >> 13) & 1);
- dev->sp = !((tmp >> 6) & 1)
- && ((tmp >> 13) & 1);
- dev->fd = (tmp >> 8) & 1;
- goto auto_neg_done;
- }
- }
- if ((tmp >> 8) & 1) {
- tmp1 = read_mii(phyaddr, 9, regs);
- tmp2 = read_mii(phyaddr, 10, regs);
- if ((tmp1 & GRETH_MII_EXTADV_1000FD) &&
- (tmp2 & GRETH_MII_EXTPRT_1000FD)) {
- dev->gb = 1;
- dev->fd = 1;
- }
- if ((tmp1 & GRETH_MII_EXTADV_1000HD) &&
- (tmp2 & GRETH_MII_EXTPRT_1000HD)) {
- dev->gb = 1;
- dev->fd = 0;
- }
- }
- if ((dev->gb == 0) || ((dev->gb == 1) && (dev->gbit_mac == 0))) {
- tmp1 = read_mii(phyaddr, 4, regs);
- tmp2 = read_mii(phyaddr, 5, regs);
- if ((tmp1 & GRETH_MII_100TXFD) &&
- (tmp2 & GRETH_MII_100TXFD)) {
- dev->sp = 1;
- dev->fd = 1;
- }
- if ((tmp1 & GRETH_MII_100TXHD) &&
- (tmp2 & GRETH_MII_100TXHD)) {
- dev->sp = 1;
- dev->fd = 0;
- }
- if ((tmp1 & GRETH_MII_10FD) && (tmp2 & GRETH_MII_10FD)) {
- dev->fd = 1;
- }
- if ((dev->gb == 1) && (dev->gbit_mac == 0)) {
- dev->gb = 0;
- dev->fd = 0;
- write_mii(phyaddr, 0, dev->sp << 13, regs);
- }
- }
-
- }
- auto_neg_done:
- debug("%s GRETH Ethermac at [0x%x] irq %d. Running \
- %d Mbps %s duplex\n", dev->gbit_mac ? "10/100/1000" : "10/100", (unsigned int)(regs), (unsigned int)(dev->irq), dev->gb ? 1000 : (dev->sp ? 100 : 10), dev->fd ? "full" : "half");
- /* Read out PHY info if extended registers are available */
- if (tmp & 1) {
- tmp1 = read_mii(phyaddr, 2, regs);
- tmp2 = read_mii(phyaddr, 3, regs);
- tmp1 = (tmp1 << 6) | ((tmp2 >> 10) & 0x3F);
- tmp = tmp2 & 0xF;
-
- tmp2 = (tmp2 >> 4) & 0x3F;
- debug("PHY: Vendor %x Device %x Revision %d\n", tmp1,
- tmp2, tmp);
- } else {
- printf("PHY info not available\n");
- }
-
- /* set speed and duplex bits in control register */
- GRETH_REGORIN(®s->control,
- (dev->gb << 8) | (dev->sp << 7) | (dev->fd << 4));
-
- return 0;
-}
-
-void greth_halt(struct eth_device *dev)
-{
- greth_priv *greth;
- greth_regs *regs;
- int i;
-
- debug("greth_halt\n");
-
- if (!dev || !dev->priv)
- return;
-
- greth = dev->priv;
- regs = greth->regs;
-
- if (!regs)
- return;
-
- /* disable receiver/transmitter by clearing the enable bits */
- GRETH_REGANDIN(®s->control, ~(GRETH_RXEN | GRETH_TXEN));
-
- /* reset rx/tx descriptors */
- if (greth->rxbd_base) {
- for (i = 0; i < GRETH_RXBD_CNT; i++) {
- greth->rxbd_base[i].stat =
- (i >= (GRETH_RXBD_CNT - 1)) ? GRETH_BD_WR : 0;
- }
- }
-
- if (greth->txbd_base) {
- for (i = 0; i < GRETH_TXBD_CNT; i++) {
- greth->txbd_base[i].stat =
- (i >= (GRETH_TXBD_CNT - 1)) ? GRETH_BD_WR : 0;
- }
- }
-}
-
-int greth_send(struct eth_device *dev, void *eth_data, int data_length)
-{
- greth_priv *greth = dev->priv;
- greth_regs *regs = greth->regs;
- greth_bd *txbd;
- void *txbuf;
- unsigned int status;
-
- debug("greth_send\n");
-
- /* send data, wait for data to be sent, then return */
- if (((unsigned int)eth_data & (GRETH_BUF_ALIGN - 1))
- && !greth->gbit_mac) {
- /* data not aligned as needed by GRETH 10/100, solve this by allocating 4 byte aligned buffer
- * and copy data to before giving it to GRETH.
- */
- if (!greth->txbuf) {
- greth->txbuf = malloc(GRETH_RXBUF_SIZE);
- }
-
- txbuf = greth->txbuf;
-
- /* copy data info buffer */
- memcpy((char *)txbuf, (char *)eth_data, data_length);
-
- /* keep buffer to next time */
- } else {
- txbuf = (void *)eth_data;
- }
- /* get descriptor to use, only 1 supported... hehe easy */
- txbd = greth->txbd_base;
-
- /* setup descriptor to wrap around to it self */
- txbd->addr = (unsigned int)txbuf;
- txbd->stat = GRETH_BD_EN | GRETH_BD_WR | data_length;
-
- /* Remind Core which descriptor to use when sending */
- GRETH_REGSAVE(®s->tx_desc_p, (unsigned int)txbd);
-
- /* initate send by enabling transmitter */
- GRETH_REGORIN(®s->control, GRETH_TXEN);
-
- /* Wait for data to be sent */
- while ((status = GRETH_REGLOAD(&txbd->stat)) & GRETH_BD_EN) {
- ;
- }
-
- /* was the packet transmitted succesfully? */
- if (status & GRETH_TXBD_ERR_AL) {
- greth->stats.tx_limit_errors++;
- }
-
- if (status & GRETH_TXBD_ERR_UE) {
- greth->stats.tx_underrun_errors++;
- }
-
- if (status & GRETH_TXBD_ERR_LC) {
- greth->stats.tx_latecol_errors++;
- }
-
- if (status &
- (GRETH_TXBD_ERR_LC | GRETH_TXBD_ERR_UE | GRETH_TXBD_ERR_AL)) {
- /* any error */
- greth->stats.tx_errors++;
- return -1;
- }
-
- /* bump tx packet counter */
- greth->stats.tx_packets++;
-
- /* return succefully */
- return 0;
-}
-
-int greth_recv(struct eth_device *dev)
-{
- greth_priv *greth = dev->priv;
- greth_regs *regs = greth->regs;
- greth_bd *rxbd;
- unsigned int status, len = 0, bad;
- char *d;
- int enable = 0;
- int i;
-
- /* Receive One packet only, but clear as many error packets as there are
- * available.
- */
- {
- /* current receive descriptor */
- rxbd = greth->rxbd_curr;
-
- /* get status of next received packet */
- status = GRETH_REGLOAD(&rxbd->stat);
-
- bad = 0;
-
- /* stop if no more packets received */
- if (status & GRETH_BD_EN) {
- goto done;
- }
-
- debug("greth_recv: packet 0x%x, 0x%x, len: %d\n",
- (unsigned int)rxbd, status, status & GRETH_BD_LEN);
-
- /* Check status for errors.
- */
- if (status & GRETH_RXBD_ERR_FT) {
- greth->stats.rx_length_errors++;
- bad = 1;
- }
- if (status & (GRETH_RXBD_ERR_AE | GRETH_RXBD_ERR_OE)) {
- greth->stats.rx_frame_errors++;
- bad = 1;
- }
- if (status & GRETH_RXBD_ERR_CRC) {
- greth->stats.rx_crc_errors++;
- bad = 1;
- }
- if (bad) {
- greth->stats.rx_errors++;
- printf
- ("greth_recv: Bad packet (%d, %d, %d, 0x%08x, %d)\n",
- greth->stats.rx_length_errors,
- greth->stats.rx_frame_errors,
- greth->stats.rx_crc_errors, status,
- greth->stats.rx_packets);
- /* print all rx descriptors */
- for (i = 0; i < GRETH_RXBD_CNT; i++) {
- printf("[%d]: Stat=0x%lx, Addr=0x%lx\n", i,
- GRETH_REGLOAD(&greth->rxbd_base[i].stat),
- GRETH_REGLOAD(&greth->rxbd_base[i].addr));
- }
- } else {
- /* Process the incoming packet. */
- len = status & GRETH_BD_LEN;
- d = (char *)rxbd->addr;
-
- debug
- ("greth_recv: new packet, length: %d. data: %x %x %x %x %x %x %x %x\n",
- len, d[0], d[1], d[2], d[3], d[4], d[5], d[6],
- d[7]);
-
- /* flush all data cache to make sure we're not reading old packet data */
- sparc_dcache_flush_all();
-
- /* pass packet on to network subsystem */
- net_process_received_packet((void *)d, len);
-
- /* bump stats counters */
- greth->stats.rx_packets++;
-
- /* bad is now 0 ==> will stop loop */
- }
-
- /* reenable descriptor to receive more packet with this descriptor, wrap around if needed */
- rxbd->stat =
- GRETH_BD_EN |
- (((unsigned int)greth->rxbd_curr >=
- (unsigned int)greth->rxbd_max) ? GRETH_BD_WR : 0);
- enable = 1;
-
- /* increase index */
- greth->rxbd_curr =
- ((unsigned int)greth->rxbd_curr >=
- (unsigned int)greth->rxbd_max) ? greth->
- rxbd_base : (greth->rxbd_curr + 1);
-
- }
-
- if (enable) {
- GRETH_REGORIN(®s->control, GRETH_RXEN);
- }
- done:
- /* return positive length of packet or 0 if non received */
- return len;
-}
-
-void greth_set_hwaddr(greth_priv * greth, unsigned char *mac)
-{
- /* save new MAC address */
- greth->dev->enetaddr[0] = greth->hwaddr[0] = mac[0];
- greth->dev->enetaddr[1] = greth->hwaddr[1] = mac[1];
- greth->dev->enetaddr[2] = greth->hwaddr[2] = mac[2];
- greth->dev->enetaddr[3] = greth->hwaddr[3] = mac[3];
- greth->dev->enetaddr[4] = greth->hwaddr[4] = mac[4];
- greth->dev->enetaddr[5] = greth->hwaddr[5] = mac[5];
- greth->regs->esa_msb = (mac[0] << 8) | mac[1];
- greth->regs->esa_lsb =
- (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5];
-
- debug("GRETH: New MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n",
- mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-}
-
-int greth_initialize(bd_t * bis)
-{
- greth_priv *greth;
- ambapp_apbdev apbdev;
- struct eth_device *dev;
- int i;
- char *addr_str, *end;
- unsigned char addr[6];
-
- debug("Scanning for GRETH\n");
-
- /* Find Device & IRQ via AMBA Plug&Play information,
- * CONFIG_SYS_GRLIB_GRETH_INDEX select which GRETH if multiple
- * GRETHs in system.
- */
- if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_ETHMAC,
- CONFIG_SYS_GRLIB_GRETH_INDEX, &apbdev) != 1) {
- return -1; /* GRETH not found */
- }
-
- greth = (greth_priv *) malloc(sizeof(greth_priv));
- dev = (struct eth_device *)malloc(sizeof(struct eth_device));
- memset(dev, 0, sizeof(struct eth_device));
- memset(greth, 0, sizeof(greth_priv));
-
- greth->regs = (greth_regs *) apbdev.address;
- greth->irq = apbdev.irq;
- debug("Found GRETH at %p, irq %d\n", greth->regs, greth->irq);
- dev->priv = (void *)greth;
- dev->iobase = (unsigned int)greth->regs;
- dev->init = greth_init;
- dev->halt = greth_halt;
- dev->send = greth_send;
- dev->recv = greth_recv;
- greth->dev = dev;
-
- /* Reset Core */
- GRETH_REGSAVE(&greth->regs->control, GRETH_RESET);
-
- /* Wait for core to finish reset cycle */
- while (GRETH_REGLOAD(&greth->regs->control) & GRETH_RESET) ;
-
- /* Get the phy address which assumed to have been set
- correctly with the reset value in hardware */
- greth->phyaddr = (GRETH_REGLOAD(&greth->regs->mdio) >> 11) & 0x1F;
-
- /* Check if mac is gigabit capable */
- greth->gbit_mac = (GRETH_REGLOAD(&greth->regs->control) >> 27) & 1;
-
- /* Make descriptor string */
- if (greth->gbit_mac) {
- strcpy(dev->name, "GRETH_10/100/GB");
- } else {
- strcpy(dev->name, "GRETH_10/100");
- }
-
- /* initiate PHY, select speed/duplex depending on connected PHY */
- if (greth_init_phy(greth, bis)) {
- /* Failed to init PHY (timedout) */
- debug("GRETH[%p]: Failed to init PHY\n", greth->regs);
- return -1;
- }
-
- /* Register Device to EtherNet subsystem */
- eth_register(dev);
-
- /* Get MAC address */
- if ((addr_str = getenv("ethaddr")) != NULL) {
- for (i = 0; i < 6; i++) {
- addr[i] =
- addr_str ? simple_strtoul(addr_str, &end, 16) : 0;
- if (addr_str) {
- addr_str = (*end) ? end + 1 : end;
- }
- }
- } else {
- /* No ethaddr set */
- return -EINVAL;
- }
-
- /* set and remember MAC address */
- greth_set_hwaddr(greth, addr);
-
- debug("GRETH[%p]: Initialized successfully\n", greth->regs);
- return 0;
-}
+++ /dev/null
-/* Gaisler.com GRETH 10/100/1000 Ethernet MAC driver
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define GRETH_FD 0x10
-#define GRETH_RESET 0x40
-#define GRETH_MII_BUSY 0x8
-#define GRETH_MII_NVALID 0x10
-
-/* MII registers */
-#define GRETH_MII_EXTADV_1000FD 0x00000200
-#define GRETH_MII_EXTADV_1000HD 0x00000100
-#define GRETH_MII_EXTPRT_1000FD 0x00000800
-#define GRETH_MII_EXTPRT_1000HD 0x00000400
-
-#define GRETH_MII_100T4 0x00000200
-#define GRETH_MII_100TXFD 0x00000100
-#define GRETH_MII_100TXHD 0x00000080
-#define GRETH_MII_10FD 0x00000040
-#define GRETH_MII_10HD 0x00000020
-
-#define GRETH_BD_EN 0x800
-#define GRETH_BD_WR 0x1000
-#define GRETH_BD_IE 0x2000
-#define GRETH_BD_LEN 0x7FF
-
-#define GRETH_TXEN 0x1
-#define GRETH_INT_TX 0x8
-#define GRETH_TXI 0x4
-#define GRETH_TXBD_STATUS 0x0001C000
-#define GRETH_TXBD_MORE 0x20000
-#define GRETH_TXBD_IPCS 0x40000
-#define GRETH_TXBD_TCPCS 0x80000
-#define GRETH_TXBD_UDPCS 0x100000
-#define GRETH_TXBD_ERR_LC 0x10000
-#define GRETH_TXBD_ERR_UE 0x4000
-#define GRETH_TXBD_ERR_AL 0x8000
-#define GRETH_TXBD_NUM 128
-#define GRETH_TXBD_NUM_MASK (GRETH_TXBD_NUM-1)
-#define GRETH_TX_BUF_SIZE 2048
-
-#define GRETH_INT_RX 0x4
-#define GRETH_RXEN 0x2
-#define GRETH_RXI 0x8
-#define GRETH_RXBD_STATUS 0xFFFFC000
-#define GRETH_RXBD_ERR_AE 0x4000
-#define GRETH_RXBD_ERR_FT 0x8000
-#define GRETH_RXBD_ERR_CRC 0x10000
-#define GRETH_RXBD_ERR_OE 0x20000
-#define GRETH_RXBD_ERR_LE 0x40000
-#define GRETH_RXBD_IP_DEC 0x80000
-#define GRETH_RXBD_IP_CSERR 0x100000
-#define GRETH_RXBD_UDP_DEC 0x200000
-#define GRETH_RXBD_UDP_CSERR 0x400000
-#define GRETH_RXBD_TCP_DEC 0x800000
-#define GRETH_RXBD_TCP_CSERR 0x1000000
-
-#define GRETH_RXBD_NUM 128
-#define GRETH_RXBD_NUM_MASK (GRETH_RXBD_NUM-1)
-#define GRETH_RX_BUF_SIZE 2048
-
-/* Ethernet configuration registers */
-typedef struct _greth_regs {
- volatile unsigned int control;
- volatile unsigned int status;
- volatile unsigned int esa_msb;
- volatile unsigned int esa_lsb;
- volatile unsigned int mdio;
- volatile unsigned int tx_desc_p;
- volatile unsigned int rx_desc_p;
-} greth_regs;
-
-/* Ethernet buffer descriptor */
-typedef struct _greth_bd {
- volatile unsigned int stat;
- unsigned int addr; /* Buffer address not changed by HW */
-} greth_bd;
" nop\n" \
" nop\n" \
: : "i"(offsetof(gd_t, jt)), "i"(FO(x)) : "r1", "r2");
-#elif defined(CONFIG_SPARC)
-/*
- * g7 holds the pointer to the global_data. g1 is call clobbered.
- */
-#define EXPORT_FUNC(f, a, x, ...) \
- asm volatile( \
-" .globl\t" #x "\n" \
-#x ":\n" \
-" set %0, %%g1\n" \
-" or %%g1, %%g7, %%g1\n" \
-" ld [%%g1], %%g1\n" \
-" ld [%%g1 + %1], %%g1\n" \
-" jmp %%g1\n" \
-" nop\n" \
- : : "i"(offsetof(gd_t, jt)), "i"(FO(x)) : "g1");
#elif defined(CONFIG_NDS32)
/*
* r16 holds the pointer to the global_data. gp is call clobbered.
+++ /dev/null
-/* Interface for accessing Gaisler AMBA Plug&Play Bus.
- * The AHB bus can be interfaced with a simpler bus -
- * the APB bus, also freely available in GRLIB at
- * www.gaisler.com.
- *
- * (C) Copyright 2009, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __AMBAPP_H__
-#define __AMBAPP_H__
-
-#include <ambapp_ids.h>
-
-#ifndef __ASSEMBLER__
-/* Structures used to access Plug&Play information directly */
-struct ambapp_pnp_ahb {
- const unsigned int id; /* VENDOR, DEVICE, VER, IRQ, */
- const unsigned int custom[3];
- const unsigned int mbar[4]; /* MASK, ADDRESS, TYPE,
- * CACHABLE/PREFETCHABLE */
-};
-
-struct ambapp_pnp_apb {
- const unsigned int id; /* VENDOR, DEVICE, VER, IRQ, */
- const unsigned int iobar; /* MASK, ADDRESS, TYPE,
- * CACHABLE/PREFETCHABLE */
-};
-
-/* AMBA Plug&Play AHB Masters & Slaves information locations
- * Max devices is 64 supported by HW, however often only 16
- * are used.
- */
-struct ambapp_pnp_info {
- struct ambapp_pnp_ahb masters[64];
- struct ambapp_pnp_ahb slaves[63];
- const unsigned int unused[4];
- const unsigned int systemid[4];
-};
-
-/* Describes a AMBA PnP bus */
-struct ambapp_bus {
- int buses; /* Number of buses */
- unsigned int ioareas[6]; /* PnP I/O AREAs of AHB buses */
- unsigned int freq; /* Frequency of bus0 [Hz] */
-};
-
-/* Processor Local AMBA bus */
-extern struct ambapp_bus ambapp_plb;
-
-/* Get Bus frequency of a certain AMBA bus */
-extern unsigned int ambapp_bus_freq(
- struct ambapp_bus *abus,
- int ahb_bus_index
- );
-
-/* AMBA PnP information of a APB Device */
-typedef struct {
- unsigned int vendor;
- unsigned int device;
- unsigned char irq;
- unsigned char ver;
- unsigned int address;
- unsigned int mask;
- int ahb_bus_index;
-} ambapp_apbdev;
-
-/* AMBA PnP information of a AHB Device */
-typedef struct {
- unsigned int vendor;
- unsigned int device;
- unsigned char irq;
- unsigned char ver;
- unsigned int userdef[3];
- unsigned int address[4];
- unsigned int mask[4];
- int type[4];
- int ahb_bus_index;
-} ambapp_ahbdev;
-
-/* Scan AMBA Bus for AHB Bridges */
-extern void ambapp_bus_init(
- unsigned int ioarea,
- unsigned int freq,
- struct ambapp_bus *abus);
-
-/* Find APB Slave device by index using breath first search.
- *
- * When vendor and device are both set to zero, any device
- * with a non-zero device ID will match the search. It may be
- * useful when processing all devices on a AMBA bus.
- */
-extern int ambapp_apb_find(
- struct ambapp_bus *abus,
- int vendor,
- int device,
- int index,
- ambapp_apbdev *dev
- );
-
-/* Find AHB Master device by index using breath first search.
- *
- * When vendor and device are both set to zero, any device
- * with a non-zero device ID will match the search. It may be
- * useful when processing all devices on a AMBA bus.
- */
-extern int ambapp_ahbmst_find(
- struct ambapp_bus *abus,
- int vendor,
- int device,
- int index,
- ambapp_ahbdev *dev
- );
-
-/* Find AHB Slave device by index using breath first search.
- *
- * When vendor and device are both set to zero, any device
- * with a non-zero device ID will match the search. It may be
- * useful when processing all devices on a AMBA bus.
- */
-extern int ambapp_ahbslv_find(
- struct ambapp_bus *abus,
- int vendor,
- int device,
- int index,
- ambapp_ahbdev *dev
- );
-
-/* Return number of APB Slave devices of a certain ID (VENDOR:DEVICE)
- * zero is returned if no devices was found.
- */
-extern int ambapp_apb_count(struct ambapp_bus *abus, int vendor, int device);
-
-/* Return number of AHB Master devices of a certain ID (VENDOR:DEVICE)
- * zero is returned if no devices was found.
- */
-extern int ambapp_ahbmst_count(struct ambapp_bus *abus, int vendor, int device);
-
-/* Return number of AHB Slave devices of a certain ID (VENDOR:DEVICE)
- * zero is returned if no devices was found.
- */
-extern int ambapp_ahbslv_count(struct ambapp_bus *abus, int vendor, int device);
-
-#ifdef CONFIG_CMD_AMBAPP
-
-/* AMBA Plug&Play relocation & initialization */
-int ambapp_init_reloc(void);
-
-/* AMBA Plug&Play Name of Vendors and devices */
-
-/* Return name of device */
-char *ambapp_device_id2str(int vendor, int id);
-
-/* Return name of vendor */
-char *ambapp_vendor_id2str(int vendor);
-
-/* Return description of a device */
-char *ambapp_device_id2desc(int vendor, int id);
-
-#endif
-
-#endif /* defined(__ASSEMBLER__) */
-
-#define AMBA_DEFAULT_IOAREA 0xfff00000
-#define AMBA_CONF_AREA 0xff000
-#define AMBA_AHB_SLAVE_CONF_AREA 0x800
-
-#define DEV_NONE 0
-#define DEV_AHB_MST 1
-#define DEV_AHB_SLV 2
-#define DEV_APB_SLV 3
-
-#define AMBA_TYPE_APBIO 0x1
-#define AMBA_TYPE_MEM 0x2
-#define AMBA_TYPE_AHBIO 0x3
-
-/* ID layout for APB and AHB devices */
-#define AMBA_PNP_ID(vendor, device) (((vendor)<<24) | ((device)<<12))
-
-/* APB Slave PnP layout definitions */
-#define AMBA_APB_ID_OFS (0*4)
-#define AMBA_APB_IOBAR_OFS (1*4)
-#define AMBA_APB_CONF_LENGH (2*4)
-
-/* AHB Master/Slave layout PnP definitions */
-#define AMBA_AHB_ID_OFS (0*4)
-#define AMBA_AHB_CUSTOM0_OFS (1*4)
-#define AMBA_AHB_CUSTOM1_OFS (2*4)
-#define AMBA_AHB_CUSTOM2_OFS (3*4)
-#define AMBA_AHB_MBAR0_OFS (4*4)
-#define AMBA_AHB_MBAR1_OFS (5*4)
-#define AMBA_AHB_MBAR2_OFS (6*4)
-#define AMBA_AHB_MBAR3_OFS (7*4)
-#define AMBA_AHB_CONF_LENGH (8*4)
-
-/* Macros for extracting information from AMBA PnP information
- * registers.
- */
-
-#define amba_vendor(x) (((x) >> 24) & 0xff)
-
-#define amba_device(x) (((x) >> 12) & 0xfff)
-
-#define amba_irq(conf) ((conf) & 0x1f)
-
-#define amba_ver(conf) (((conf)>>5) & 0x1f)
-
-#define amba_iobar_start(base, iobar) \
- ((base) | ((((iobar) & 0xfff00000)>>12) & (((iobar) & 0xfff0)<<4)))
-
-#define amba_membar_start(mbar) \
- (((mbar) & 0xfff00000) & (((mbar) & 0xfff0) << 16))
-
-#define amba_membar_type(mbar) ((mbar) & 0xf)
-
-#define amba_membar_mask(mbar) (((mbar) >> 4) & 0xfff)
-
-#define amba_ahbio_adr(addr, base_ioarea) \
- ((unsigned int)(base_ioarea) | ((addr) >> 12))
-
-#define amba_apb_mask(iobar) ((~(amba_membar_mask(iobar)<<8) & 0x000fffff) + 1)
-
-#endif
+++ /dev/null
-/* AMBA Plug & Play Bus Vendor and Device IDs.
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#ifndef __AMBAPP_IDS_H__
-#define __AMBAPP_IDS_H__
-
-/* Vendor ID defines */
-#define VENDOR_GAISLER 0x01
-#define VENDOR_PENDER 0x02
-#define VENDOR_ESA 0x04
-#define VENDOR_ASTRIUM 0x06
-#define VENDOR_OPENCHIP 0x07
-#define VENDOR_OPENCORES 0x08
-#define VENDOR_CONTRIB 0x09
-#define VENDOR_EONIC 0x0b
-#define VENDOR_RADIONOR 0x0f
-#define VENDOR_GLEICHMANN 0x10
-#define VENDOR_MENTA 0x11
-#define VENDOR_SUN 0x13
-#define VENDOR_MOVIDIA 0x14
-#define VENDOR_ORBITA 0x17
-#define VENDOR_SYNOPSYS 0x21
-#define VENDOR_NASA 0x22
-#define VENDOR_S3 0x31
-#define VENDOR_CAL 0xca
-#define VENDOR_EMBEDDIT 0xea
-#define VENDOR_CETON 0xcb
-#define VENDOR_ACTEL 0xac
-#define VENDOR_APPLECORE 0xae
-
-/* Aeroflex Gaisler device ID defines */
-#define GAISLER_LEON2DSU 0x002
-#define GAISLER_LEON3 0x003
-#define GAISLER_LEON3DSU 0x004
-#define GAISLER_ETHAHB 0x005
-#define GAISLER_APBMST 0x006
-#define GAISLER_AHBUART 0x007
-#define GAISLER_SRCTRL 0x008
-#define GAISLER_SDCTRL 0x009
-#define GAISLER_SSRCTRL 0x00a
-#define GAISLER_APBUART 0x00c
-#define GAISLER_IRQMP 0x00d
-#define GAISLER_AHBRAM 0x00e
-#define GAISLER_AHBDPRAM 0x00f
-#define GAISLER_GPTIMER 0x011
-#define GAISLER_PCITRG 0x012
-#define GAISLER_PCISBRG 0x013
-#define GAISLER_PCIFBRG 0x014
-#define GAISLER_PCITRACE 0x015
-#define GAISLER_DMACTRL 0x016
-#define GAISLER_AHBTRACE 0x017
-#define GAISLER_DSUCTRL 0x018
-#define GAISLER_CANAHB 0x019
-#define GAISLER_GPIO 0x01a
-#define GAISLER_AHBROM 0x01b
-#define GAISLER_AHBJTAG 0x01c
-#define GAISLER_ETHMAC 0x01d
-#define GAISLER_SWNODE 0x01e
-#define GAISLER_SPW 0x01f
-#define GAISLER_AHB2AHB 0x020
-#define GAISLER_USBDC 0x021
-#define GAISLER_USB_DCL 0x022
-#define GAISLER_DDRMP 0x023
-#define GAISLER_ATACTRL 0x024
-#define GAISLER_DDRSP 0x025
-#define GAISLER_EHCI 0x026
-#define GAISLER_UHCI 0x027
-#define GAISLER_I2CMST 0x028
-#define GAISLER_SPW2 0x029
-#define GAISLER_AHBDMA 0x02a
-#define GAISLER_NUHOSP3 0x02b
-#define GAISLER_CLKGATE 0x02c
-#define GAISLER_SPICTRL 0x02d
-#define GAISLER_DDR2SP 0x02e
-#define GAISLER_SLINK 0x02f
-#define GAISLER_GRTM 0x030
-#define GAISLER_GRTC 0x031
-#define GAISLER_GRPW 0x032
-#define GAISLER_GRCTM 0x033
-#define GAISLER_GRHCAN 0x034
-#define GAISLER_GRFIFO 0x035
-#define GAISLER_GRADCDAC 0x036
-#define GAISLER_GRPULSE 0x037
-#define GAISLER_GRTIMER 0x038
-#define GAISLER_AHB2PP 0x039
-#define GAISLER_GRVERSION 0x03a
-#define GAISLER_APB2PW 0x03b
-#define GAISLER_PW2APB 0x03c
-#define GAISLER_GRCAN 0x03d
-#define GAISLER_I2CSLV 0x03e
-#define GAISLER_U16550 0x03f
-#define GAISLER_AHBMST_EM 0x040
-#define GAISLER_AHBSLV_EM 0x041
-#define GAISLER_GRTESTMOD 0x042
-#define GAISLER_ASCS 0x043
-#define GAISLER_IPMVBCTRL 0x044
-#define GAISLER_SPIMCTRL 0x045
-#define GAISLER_L4STAT 0x047
-#define GAISLER_LEON4 0x048
-#define GAISLER_LEON4DSU 0x049
-#define GAISLER_PWM 0x04a
-#define GAISLER_L2CACHE 0x04b
-#define GAISLER_SDCTRL64 0x04c
-#define GAISLER_GR1553B 0x04d
-#define GAISLER_1553TST 0x04e
-#define GAISLER_GRIOMMU 0x04f
-#define GAISLER_FTAHBRAM 0x050
-#define GAISLER_FTSRCTRL 0x051
-#define GAISLER_AHBSTAT 0x052
-#define GAISLER_LEON3FT 0x053
-#define GAISLER_FTMCTRL 0x054
-#define GAISLER_FTSDCTRL 0x055
-#define GAISLER_FTSRCTRL8 0x056
-#define GAISLER_MEMSCRUB 0x057
-#define GAISLER_FTSDCTRL64 0x058
-#define GAISLER_APBPS2 0x060
-#define GAISLER_VGACTRL 0x061
-#define GAISLER_LOGAN 0x062
-#define GAISLER_SVGACTRL 0x063
-#define GAISLER_T1AHB 0x064
-#define GAISLER_MP7WRAP 0x065
-#define GAISLER_GRSYSMON 0x066
-#define GAISLER_GRACECTRL 0x067
-#define GAISLER_ATAHBSLV 0x068
-#define GAISLER_ATAHBMST 0x069
-#define GAISLER_ATAPBSLV 0x06a
-#define GAISLER_B1553BC 0x070
-#define GAISLER_B1553RT 0x071
-#define GAISLER_B1553BRM 0x072
-#define GAISLER_AES 0x073
-#define GAISLER_ECC 0x074
-#define GAISLER_PCIF 0x075
-#define GAISLER_CLKMOD 0x076
-#define GAISLER_HAPSTRAK 0x077
-#define GAISLER_TEST_1X2 0x078
-#define GAISLER_WILD2AHB 0x079
-#define GAISLER_BIO1 0x07a
-#define GAISLER_AESDMA 0x07b
-#define GAISLER_SATCAN 0x080
-#define GAISLER_CANMUX 0x081
-#define GAISLER_GRTMRX 0x082
-#define GAISLER_GRTCTX 0x083
-#define GAISLER_GRTMDESC 0x084
-#define GAISLER_GRTMVC 0x085
-#define GAISLER_GEFFE 0x086
-#define GAISLER_GPREG 0x087
-#define GAISLER_GRTMPAHB 0x088
-#define GAISLER_SPWCUC 0x089
-#define GAISLER_SPW2_DMA 0x08a
-#define GAISLER_SPWROUTER 0x08b
-
-/* European Space Agency device ID defines */
-#define ESA_LEON2 0x002
-#define ESA_LEON2APB 0x003
-#define ESA_IRQ 0x005
-#define ESA_TIMER 0x006
-#define ESA_UART 0x007
-#define ESA_CFG 0x008
-#define ESA_IO 0x009
-#define ESA_MCTRL 0x00f
-#define ESA_PCIARB 0x010
-#define ESA_HURRICANE 0x011
-#define ESA_SPW_RMAP 0x012
-#define ESA_AHBUART 0x013
-#define ESA_SPWA 0x014
-#define ESA_BOSCHCAN 0x015
-#define ESA_IRQ2 0x016
-#define ESA_AHBSTAT 0x017
-#define ESA_WPROT 0x018
-#define ESA_WPROT2 0x019
-#define ESA_PDEC3AMBA 0x020
-#define ESA_PTME3AMBA 0x021
-
-/* OpenChip device ID defines */
-#define OPENCHIP_APBGPIO 0x001
-#define OPENCHIP_APBI2C 0x002
-#define OPENCHIP_APBSPI 0x003
-#define OPENCHIP_APBCHARLCD 0x004
-#define OPENCHIP_APBPWM 0x005
-#define OPENCHIP_APBPS2 0x006
-#define OPENCHIP_APBMMCSD 0x007
-#define OPENCHIP_APBNAND 0x008
-#define OPENCHIP_APBLPC 0x009
-#define OPENCHIP_APBCF 0x00a
-#define OPENCHIP_APBSYSACE 0x00b
-#define OPENCHIP_APB1WIRE 0x00c
-#define OPENCHIP_APBJTAG 0x00d
-#define OPENCHIP_APBSUI 0x00e
-
-/* Various contributions device ID defines */
-#define CONTRIB_CORE1 0x001
-#define CONTRIB_CORE2 0x002
-
-/* Gleichmann Electronics device ID defines */
-#define GLEICHMANN_CUSTOM 0x001
-#define GLEICHMANN_GEOLCD01 0x002
-#define GLEICHMANN_DAC 0x003
-#define GLEICHMANN_HPI 0x004
-#define GLEICHMANN_SPI 0x005
-#define GLEICHMANN_HIFC 0x006
-#define GLEICHMANN_ADCDAC 0x007
-#define GLEICHMANN_SPIOC 0x008
-#define GLEICHMANN_AC97 0x009
-
-/* Sun Microsystems device ID defines */
-#define SUN_T1 0x001
-#define SUN_S1 0x011
-
-/* Orbita device ID defines */
-#define ORBITA_1553B 0x001
-#define ORBITA_429 0x002
-#define ORBITA_SPI 0x003
-#define ORBITA_I2C 0x004
-#define ORBITA_SMARTCARD 0x064
-#define ORBITA_SDCARD 0x065
-#define ORBITA_UART16550 0x066
-#define ORBITA_CRYPTO 0x067
-#define ORBITA_SYSIF 0x068
-#define ORBITA_PIO 0x069
-#define ORBITA_RTC 0x0c8
-#define ORBITA_COLORLCD 0x12c
-#define ORBITA_PCI 0x190
-#define ORBITA_DSP 0x1f4
-#define ORBITA_USBHOST 0x258
-#define ORBITA_USBDEV 0x2bc
-
-/* NASA device ID defines */
-#define NASA_EP32 0x001
-
-/* CAL device ID defines */
-#define CAL_DDRCTRL 0x188
-
-/* Actel Corporation device ID defines */
-#define ACTEL_COREMP7 0x001
-
-/* AppleCore device ID defines */
-#define APPLECORE_UTLEON3 0x001
-#define APPLECORE_UTLEON3DSU 0x002
-
-/* Opencores device id's */
-#define OPENCORES_PCIBR 0x4
-#define OPENCORES_ETHMAC 0x5
-
-#endif
+++ /dev/null
-/* Configuration header file for Gaisler GR-CPCI-AX2000
- * AX board. Note that since the AX is removable the configuration
- * for this board must be edited below.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_CPCI_AX2000 1 /* ... on GR-CPCI-AX2000 board */
-
-#define CONFIG_LEON_RAM_SRAM 1
-#define CONFIG_LEON_RAM_SDRAM 2
-#define CONFIG_LEON_RAM_SDRAM_NOSRAM 3
-
-/* Select Memory to run from
- *
- * SRAM - UBoot is run in SRAM, SRAM-0x40000000, SDRAM-0x60000000
- * SDRAM - UBoot is run in SDRAM, SRAM-0x40000000 and SDRAM-0x60000000
- * SDRAM_NOSRAM - UBoot is run in SDRAM, SRAM not available, SDRAM at 0x40000000
- *
- * Note, if Linux is to be used, SDRAM or SDRAM_NOSRAM is required since
- * it doesn't fit into the 4Mb SRAM.
- *
- * SRAM is default since it will work for all systems, however will not
- * be able to boot linux.
- */
-#define CONFIG_LEON_RAM_SELECT CONFIG_LEON_RAM_SRAM
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ 20000000 /* 20MHz */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_IRQ
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS_BASE \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "getkernel=tftpboot $(scratch) $(bootfile)\0" \
- "bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.206:192.168.0.20:192.168.0.1:255.255.255.0:ax2000:eth0\0"
-
-#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
-#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
- "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
- "scratch=40200000\0" \
- ""
-#elif CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM
-#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
- "net_nfs=tftp 60000000 ${bootfile};run nfsargs addip;bootm\0" \
- "scratch=60800000\0" \
- ""
-#else
-/* More than 4Mb is assumed when running from SDRAM */
-#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
- "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
- "scratch=40800000\0" \
- ""
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS_BASE CONFIG_EXTRA_ENV_SETTINGS_SELECT
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.20
-#define CONFIG_IPADDR 192.168.0.206
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME ax2000
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-/* Memory MAP
- *
- * Flash:
- * |--------------------------------|
- * | 0x00000000 Text & Data & BSS | *
- * | for Monitor | *
- * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- * | UNUSED / Growth | * 256kb
- * |--------------------------------|
- * | 0x00050000 Base custom area | *
- * | kernel / FS | *
- * | | * Rest of Flash
- * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- * | END-0x00008000 Environment | * 32kb
- * |--------------------------------|
- *
- *
- *
- * Main Memory (4Mb SRAM or XMb SDRAM):
- * |--------------------------------|
- * | UNUSED / scratch area |
- * | |
- * | |
- * | |
- * | |
- * |--------------------------------|
- * | Monitor .Text / .DATA / .BSS | * 256kb
- * | Relocated! | *
- * |--------------------------------|
- * | Monitor Malloc | * 128kb (contains relocated environment)
- * |--------------------------------|
- * | Monitor/kernel STACK | * 64kb
- * |--------------------------------|
- * | Page Table for MMU systems | * 2k
- * |--------------------------------|
- * | PROM Code accessed from Linux | * 6kb-128b
- * |--------------------------------|
- * | Global data (avail from kernel)| * 128b
- * |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at 0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- * 0xFE000000 for 32 MB
- * 0xFF000000 for 16 MB
- * 0xFF800000 for 8 MB
- */
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_SIZE 0x00800000
-
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Bypass cache when reading regs from flash memory */
-#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
-/* Buffered writes (32byte/go) instead of single accesses */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/*
- * Environment settings
- */
-/*#define CONFIG_ENV_IS_NOWHERE 1*/
-#define CONFIG_ENV_IS_IN_FLASH 1
-/* CONFIG_ENV_ADDR need to be at sector boundary */
-#define CONFIG_ENV_SIZE 0x8000
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OVERWRITE 1
-
-/*
- * Memory map
- *
- * Always 4Mb SRAM available
- * SDRAM module may be available on 0x60000000, SDRAM
- * is configured as if a 128Mb SDRAM module is available.
- */
-
-#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#else
-#define CONFIG_SYS_SDRAM_BASE 0x60000000
-#endif
-
-#define CONFIG_SYS_SDRAM_SIZE 0x08000000
-#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
-
-/* 4Mb SRAM available */
-#if CONFIG_LEON_RAM_SELECT != CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_SRAM_BASE 0x40000000
-#define CONFIG_SYS_SRAM_SIZE 0x400000
-#define CONFIG_SYS_SRAM_END (CONFIG_SYS_SRAM_BASE+CONFIG_SYS_SRAM_SIZE)
-#endif
-
-/* Select RAM used to run U-BOOT from... */
-#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SRAM_END
-#else
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
-#endif
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE (0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END (CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-/*
- * Ethernet configuration uses on board SMC91C111
- */
-#define CONFIG_SMC91111 1
-#define CONFIG_SMC91111_BASE 0x20000300 /* chip select 3 */
-#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */
-#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
-/*#define CONFIG_SHOW_ACTIVITY*/
-#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
-
-#define CONFIG_PHY_ADDR 0x00
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Various low-level settings
- */
-
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK 0x0001BBBB
-#define CONFIG_USB_CONFIG 0x00005000
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-#define CONFIG_SYS_GRLIB_SDRAM 0
-
-/* No SDRAM Configuration */
-#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-
-/* See, GRLIB Docs (grip.pdf) on how to set up
- * These the memory controller registers.
- */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x10f800ff | (1<<11))
-#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
-#else
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82205260
-#endif
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x0809a000
-
-/* GRLIB FT-MCTRL configuration */
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x10f800ff | (1<<11))
-#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
-#else
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82205260
-#endif
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x0809a000
-
-/* no DDR controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-
-/* no DDR2 Controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* Configuration header file for Gaisler Research AB's Template
- * design (GPL Open Source SPARC/LEON3 96MHz) for Altera NIOS
- * Development board Stratix II edition, with the FPGA device
- * EP2S60.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* Altera NIOS Development board, Stratix II board */
-#define CONFIG_GR_EP2S60 1
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ 96000000 /* 96MHz */
-
-/* Define this is the GR-2S60-MEZZ mezzanine is available and you
- * want to use the USB and GRETH functionality of the board
- */
-#undef GR_2S60_MEZZ
-
-#ifdef GR_2S60_MEZZ
-#define USE_GRETH 1
-#define USE_GRUSB 1
-#endif
-
-/*
- * Serial console configuration
- */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_IRQ
-
-/* USB support */
-#if USE_GRUSB
-#define CONFIG_USB_UHCI
-/* Enable needed helper functions */
-#endif
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
- "scratch=40800000\0" \
- "getkernel=tftpboot $(scratch) $(bootfile)\0" \
- "bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.207:192.168.0.20:192.168.0.1:255.255.255.0:ml401:eth0\0" \
- ""
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.20
-#define CONFIG_IPADDR 192.168.0.207
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME ml401
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-/* Memory MAP
- *
- * Flash:
- * |--------------------------------|
- * | 0x00000000 Text & Data & BSS | *
- * | for Monitor | *
- * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- * | UNUSED / Growth | * 256kb
- * |--------------------------------|
- * | 0x00050000 Base custom area | *
- * | kernel / FS | *
- * | | * Rest of Flash
- * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- * | END-0x00008000 Environment | * 32kb
- * |--------------------------------|
- *
- *
- *
- * Main Memory:
- * |--------------------------------|
- * | UNUSED / scratch area |
- * | |
- * | |
- * | |
- * | |
- * |--------------------------------|
- * | Monitor .Text / .DATA / .BSS | * 512kb
- * | Relocated! | *
- * |--------------------------------|
- * | Monitor Malloc | * 128kb (contains relocated environment)
- * |--------------------------------|
- * | Monitor/kernel STACK | * 64kb
- * |--------------------------------|
- * | Page Table for MMU systems | * 2k
- * |--------------------------------|
- * | PROM Code accessed from Linux | * 6kb-128b
- * |--------------------------------|
- * | Global data (avail from kernel)| * 128b
- * |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at 0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- * 0xFE000000 for 32 MB
- * 0xFF000000 for 16 MB
- * 0xFF800000 for 8 MB
- */
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_SIZE 0x00400000 /* FPGA Bit file is in top of FLASH, we only ues the bottom 4Mb */
-
-#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Bypass cache when reading regs from flash memory */
-#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
-/* Buffered writes (32byte/go) instead of single accesses */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/*
- * Environment settings
- */
-/*#define CONFIG_ENV_IS_NOWHERE 1*/
-#define CONFIG_ENV_IS_IN_FLASH 1
-/* CONFIG_ENV_ADDR need to be at sector boundary */
-#define CONFIG_ENV_SIZE 0x8000
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OVERWRITE 1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_SDRAM_SIZE 0x02000000
-#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
-
-/* no SRAM available */
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE (0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END (CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-/*
- * Ethernet configuration uses on board SMC91C111, however if a mezzanine
- * with a PHY is attached the GRETH can be used on this board.
- * Define USE_GRETH in order to use the mezzanine provided PHY with the
- * onchip GRETH network MAC, note that this is not supported by the
- * template design.
- */
-#ifndef USE_GRETH
-
-/* USE SMC91C111 MAC */
-#define CONFIG_SMC91111 1
-#define CONFIG_SMC91111_BASE 0x20000300 /* chip select 3 */
-#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */
-#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
-/*#define CONFIG_SHOW_ACTIVITY*/
-#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
-
-#else
-
-/* USE GRETH Ethernet Driver */
-#define CONFIG_GRETH 1
-#endif
-
-#define CONFIG_PHY_ADDR 0x00
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK 0x0001BBBB
-#define CONFIG_USB_CONFIG 0x00005000
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-#define CONFIG_SYS_GRLIB_SDRAM 0
-
-/* No SDRAM Configuration */
-#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-
-/* See, GRLIB Docs (grip.pdf) on how to set up
- * These the memory controller registers.
- */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x10f800ff | (1<<11))
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x00000000
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00000000
-
-/* GRLIB FT-MCTRL configuration */
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x10f800ff | (1<<11))
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x00000000
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00000000
-
-/* DDR controller */
-#define CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-#define CONFIG_SYS_GRLIB_GAISLER_DDRSPA1_CTRL 0xa900830a
-
-/* no DDR2 Controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* Configuration header file for Gaisler GR-XC3S-1500
- * spartan board.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_GRXC3S1500 1 /* ... on GR-XC3S-1500 board */
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_IRQ
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
- "scratch=40200000\0" \
- "getkernel=tftpboot $(scratch) $(bootfile)\0" \
- "bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.206:192.168.0.20:192.168.0.1:255.255.255.0:grxc3s1500_daniel:eth0\0" \
- ""
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.20
-#define CONFIG_IPADDR 192.168.0.206
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME grxc3s1500
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-/* Memory MAP
- *
- * Flash:
- * |--------------------------------|
- * | 0x00000000 Text & Data & BSS | *
- * | for Monitor | *
- * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- * | UNUSED / Growth | * 256kb
- * |--------------------------------|
- * | 0x00050000 Base custom area | *
- * | kernel / FS | *
- * | | * Rest of Flash
- * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- * | END-0x00008000 Environment | * 32kb
- * |--------------------------------|
- *
- *
- *
- * Main Memory:
- * |--------------------------------|
- * | UNUSED / scratch area |
- * | |
- * | |
- * | |
- * | |
- * |--------------------------------|
- * | Monitor .Text / .DATA / .BSS | * 256kb
- * | Relocated! | *
- * |--------------------------------|
- * | Monitor Malloc | * 128kb (contains relocated environment)
- * |--------------------------------|
- * | Monitor/kernel STACK | * 64kb
- * |--------------------------------|
- * | Page Table for MMU systems | * 2k
- * |--------------------------------|
- * | PROM Code accessed from Linux | * 6kb-128b
- * |--------------------------------|
- * | Global data (avail from kernel)| * 128b
- * |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at 0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- * 0xFE000000 for 32 MB
- * 0xFF000000 for 16 MB
- * 0xFF800000 for 8 MB
- */
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_SIZE 0x00800000
-
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Bypass cache when reading regs from flash memory */
-#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
-/* Buffered writes (32byte/go) instead of single accesses */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/*
- * Environment settings
- */
-/*#define CONFIG_ENV_IS_NOWHERE 1*/
-#define CONFIG_ENV_IS_IN_FLASH 1
-/* CONFIG_ENV_ADDR need to be at sector boundary */
-#define CONFIG_ENV_SIZE 0x8000
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OVERWRITE 1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_SDRAM_SIZE 0x4000000
-#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
-
-/* no SRAM available */
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-/* Always Run U-Boot from SDRAM */
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE (0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END (CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_GRETH 1
-
-#define CONFIG_PHY_ADDR 0x00
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Various low-level settings
- */
-
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK 0x0001BBBB
-#define CONFIG_USB_CONFIG 0x00005000
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-#define CONFIG_SYS_GRLIB_SDRAM 0
-
-/* No SDRAM Configuration */
-#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-
-/* See, GRLIB Docs (grip.pdf) on how to set up
- * These the memory controller registers.
- */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00136000
-
-/* GRLIB FT-MCTRL configuration */
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00136000
-
-/* no DDR controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-
-/* no DDR2 Controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* Configuration header file for LEON3 GRSIM, trying to be similar
- * to Gaisler's GR-XC3S-1500 board.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- *
- * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
- *
- * TSIM command:
- * $ tsim-leon3 -sdram 32768 -ram 4096 -rom 2048 -mmu -cas
- *
- * In the evaluation version of TSIM, the -sdram/-ram/-rom arguments are
- * hard-coded to these values and need not be specified. (see below)
- *
- * Get TSIM from http://www.gaisler.com/index.php/downloads/simulators
- */
-
-#define CONFIG_GRSIM 0 /* ... not running on GRSIM */
-#define CONFIG_TSIM 1 /* ... running on TSIM */
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
- "rootpath=/export/roofs\0" \
- "scratch=40000000\0" \
- "getkernel=tftpboot $(scratch) $(bootfile)\0" \
- "bootargs=console=ttyS0,38400" \
- ""
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.81
-#define CONFIG_IPADDR 192.168.0.80
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME grxc3s1500
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-/* Memory MAP
- *
- * Flash:
- * |--------------------------------|
- * | 0x00000000 Text & Data & BSS | *
- * | for Monitor | *
- * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- * | UNUSED / Growth | * 256kb
- * |--------------------------------|
- * | 0x00050000 Base custom area | *
- * | kernel / FS | *
- * | | * Rest of Flash
- * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- * | END-0x00008000 Environment | * 32kb
- * |--------------------------------|
- *
- *
- *
- * Main Memory:
- * |--------------------------------|
- * | UNUSED / scratch area |
- * | |
- * | |
- * | |
- * | |
- * |--------------------------------|
- * | Monitor .Text / .DATA / .BSS | * 256kb
- * | Relocated! | *
- * |--------------------------------|
- * | Monitor Malloc | * 128kb (contains relocated environment)
- * |--------------------------------|
- * | Monitor/kernel STACK | * 64kb
- * |--------------------------------|
- * | Page Table for MMU systems | * 2k
- * |--------------------------------|
- * | PROM Code accessed from Linux | * 6kb-128b
- * |--------------------------------|
- * | Global data (avail from kernel)| * 128b
- * |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at 0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- * 0xFE000000 for 32 MB
- * 0xFF000000 for 16 MB
- * 0xFF800000 for 8 MB
- */
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_SIZE 0x00800000
-#define CONFIG_ENV_SIZE 0x8000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)
-
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
-
-#ifdef ENABLE_FLASH_SUPPORT
-/* For use with grsim FLASH emulation extension */
-#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-
-#undef CONFIG_FLASH_8BIT /* Flash is 32-bit */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#endif
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_NOWHERE 1
-/*#define CONFIG_ENV_IS_IN_FLASH*/
-/*#define CONFIG_ENV_SIZE 0x8000*/
-#define CONFIG_ENV_SECT_SIZE 0x40000
-#define CONFIG_ENV_OVERWRITE 1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_SDRAM_BASE 0x60000000
-#define CONFIG_SYS_SDRAM_SIZE 0x02000000 /* 32MiB SDRAM */
-#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE)
-
-#define CONFIG_SYS_SRAM_BASE 0x40000000
-#define CONFIG_SYS_SRAM_SIZE 0x00400000 /* 4MiB SRAM */
-#define CONFIG_SYS_SRAM_END (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE)
-
-/* Always Run U-Boot from SDRAM */
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE (0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END (CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-#ifdef CONFIG_CMD_NET
-/*
- * Ethernet configuration
- */
-#define CONFIG_GRETH 1
-
-/*
- * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
- */
-/* #define CONFIG_GRETH_10MBIT 1 */
-#define CONFIG_PHY_ADDR 0x00
-
-#endif /* CONFIG_CMD_NET */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-#define CONFIG_SYS_GRLIB_SDRAM 0
-
-#define CONFIG_SYS_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
-
-/* No SDRAM Configuration */
-#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-
-/* LEON2 MCTRL configuration */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x000000ff | (1<<11))
-#if CONFIG_GRSIM
-/* GRSIM configuration */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
-#else
-/* TSIM configuration */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x81805220
-#endif
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00136000
-
-/* GRLIB FT-MCTRL configuration */
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00136000
-
-/* no DDR controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-
-/* no DDR2 Controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-/* TSIM command:
- * $ ./tsim-leon3 -mmu -cas
- *
- * This TSIM evaluation version will expire 2015-04-02
- *
- *
- * TSIM/LEON3 SPARC simulator, version 2.0.35 (evaluation version)
- *
- * Copyright (C) 2014, Aeroflex Gaisler - all rights reserved.
- * This software may only be used with a valid license.
- * For latest updates, go to http://www.gaisler.com/
- * Comments or bug-reports to support@gaisler.com
- *
- * serial port A on stdin/stdout
- * allocated 4096 K SRAM memory, in 1 bank
- * allocated 32 M SDRAM memory, in 1 bank
- * allocated 2048 K ROM memory
- * icache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
- * dcache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
- * tsim> leon
- * 0x80000000 Memory configuration register 1 0x000002ff
- * 0x80000004 Memory configuration register 2 0x81805220
- * 0x80000008 Memory configuration register 3 0x00000000
- */
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* Configuration header file for LEON2 GRSIM.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- *
- * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
- *
- * TSIM command
- * tsim-leon -sdram 0 -ram 32000 -rom 8192 -mmu
- *
- */
-
-#define CONFIG_GRSIM 0 /* ... not running on GRSIM */
-#define CONFIG_TSIM 1 /* ... running on TSIM */
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
- "rootpath=/export/roofs\0" \
- "scratch=40000000\0" \
- "getkernel=tftpboot $(scratch) $(bootfile)\0" \
- "bootargs=console=ttyS0,38400" \
- ""
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.81
-#define CONFIG_IPADDR 192.168.0.80
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME grxc3s1500
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-/* Memory MAP
- *
- * Flash:
- * |--------------------------------|
- * | 0x00000000 Text & Data & BSS | *
- * | for Monitor | *
- * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- * | UNUSED / Growth | * 256kb
- * |--------------------------------|
- * | 0x00050000 Base custom area | *
- * | kernel / FS | *
- * | | * Rest of Flash
- * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- * | END-0x00008000 Environment | * 32kb
- * |--------------------------------|
- *
- *
- *
- * Main Memory:
- * |--------------------------------|
- * | UNUSED / scratch area |
- * | |
- * | |
- * | |
- * | |
- * |--------------------------------|
- * | Monitor .Text / .DATA / .BSS | * 256kb
- * | Relocated! | *
- * |--------------------------------|
- * | Monitor Malloc | * 128kb (contains relocated environment)
- * |--------------------------------|
- * | Monitor/kernel STACK | * 64kb
- * |--------------------------------|
- * | Page Table for MMU systems | * 2k
- * |--------------------------------|
- * | PROM Code accessed from Linux | * 6kb-128b
- * |--------------------------------|
- * | Global data (avail from kernel)| * 128b
- * |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at 0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- * 0xFE000000 for 32 MB
- * 0xFF000000 for 16 MB
- * 0xFF800000 for 8 MB
- */
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_SIZE 0x00800000
-#define CONFIG_ENV_SIZE 0x8000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)
-
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
-
-#ifdef ENABLE_FLASH_SUPPORT
-/* For use with grsim FLASH emulation extension */
-#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-
-#undef CONFIG_FLASH_8BIT /* Flash is 32-bit */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#endif
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_NOWHERE 1
-/*#define CONFIG_ENV_IS_IN_FLASH*/
-/*#define CONFIG_ENV_SIZE 0x8000*/
-#define CONFIG_ENV_SECT_SIZE 0x40000
-#define CONFIG_ENV_OVERWRITE 1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_SDRAM_SIZE 0x00800000
-#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
-
-/* no SRAM available */
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-/* Always Run U-Boot from SDRAM */
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE (0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END (CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-/*
- * Ethernet configuration
- */
-/*#define CONFIG_GRETH 1*/
-
-/*
- * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
- */
-/* #define CONFIG_GRETH_10MBIT 1 */
-#define CONFIG_PHY_ADDR 0x00
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-#define CONFIG_SYS_GRLIB_SDRAM 0
-#define CONFIG_SYS_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
-#if CONFIG_GRSIM
-#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000
-#else
-#define CONFIG_SYS_GRLIB_MEMCFG2 0x00001820
-#endif
-#define CONFIG_SYS_GRLIB_MEMCFG3 0x00136000
-
-/*** LEON2 UART 1 ***/
-
-/* UART1 Define to 1 or 0 */
-#define LEON2_UART1_LOOPBACK_ENABLE 0
-#define LEON2_UART1_FLOWCTRL_ENABLE 0
-#define LEON2_UART1_PARITY_ENABLE 0
-#define LEON2_UART1_ODDPAR_ENABLE 0
-
-/*** LEON2 UART 2 ***/
-
-/* UART2 Define to 1 or 0 */
-#define LEON2_UART2_LOOPBACK_ENABLE 0
-#define LEON2_UART2_FLOWCTRL_ENABLE 0
-#define LEON2_UART2_PARITY_ENABLE 0
-#define LEON2_UART2_ODDPAR_ENABLE 0
-
-#define LEON_CONSOLE_UART1 1
-#define LEON_CONSOLE_UART2 2
-
-/* Use UART2 as console */
-#define LEON2_CONSOLE_SELECT LEON_CONSOLE_UART1
-
-/* LEON2 I/O Port */
-/*#define LEON2_IO_PORT_DIR 0x0000aa00*/
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* GRLIB APBUART definitions
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __GRLIB_APBUART_H__
-#define __GRLIB_APBUART_H__
-
-/* APBUART Register map */
-typedef struct {
- volatile unsigned int data;
- volatile unsigned int status;
- volatile unsigned int ctrl;
- volatile unsigned int scaler;
-} ambapp_dev_apbuart;
-
-/*
- * The following defines the bits in the LEON UART Status Registers.
- */
-
-#define APBUART_STATUS_DR 0x00000001 /* Data Ready */
-#define APBUART_STATUS_TSE 0x00000002 /* TX Send Register Empty */
-#define APBUART_STATUS_THE 0x00000004 /* TX Hold Register Empty */
-#define APBUART_STATUS_BR 0x00000008 /* Break Error */
-#define APBUART_STATUS_OE 0x00000010 /* RX Overrun Error */
-#define APBUART_STATUS_PE 0x00000020 /* RX Parity Error */
-#define APBUART_STATUS_FE 0x00000040 /* RX Framing Error */
-#define APBUART_STATUS_ERR 0x00000078 /* Error Mask */
-
-/*
- * The following defines the bits in the LEON UART Ctrl Registers.
- */
-
-#define APBUART_CTRL_RE 0x00000001 /* Receiver enable */
-#define APBUART_CTRL_TE 0x00000002 /* Transmitter enable */
-#define APBUART_CTRL_RI 0x00000004 /* Receiver interrupt enable */
-#define APBUART_CTRL_TI 0x00000008 /* Transmitter interrupt enable */
-#define APBUART_CTRL_PS 0x00000010 /* Parity select */
-#define APBUART_CTRL_PE 0x00000020 /* Parity enable */
-#define APBUART_CTRL_FL 0x00000040 /* Flow control enable */
-#define APBUART_CTRL_LB 0x00000080 /* Loop Back enable */
-#define APBUART_CTRL_DBG (1<<11) /* Debug Bit used by GRMON */
-
-#endif
+++ /dev/null
-/* GRLIB GPTIMER (General Purpose Timer) definitions
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __GRLIB_GPTIMER_H__
-#define __GRLIB_GPTIMER_H__
-
-typedef struct {
- volatile unsigned int val;
- volatile unsigned int rld;
- volatile unsigned int ctrl;
- volatile unsigned int unused;
-} ambapp_dev_gptimer_element;
-
-#define GPTIMER_CTRL_EN 0x1 /* Timer enable */
-#define GPTIMER_CTRL_RS 0x2 /* Timer reStart */
-#define GPTIMER_CTRL_LD 0x4 /* Timer reLoad */
-#define GPTIMER_CTRL_IE 0x8 /* interrupt enable */
-#define GPTIMER_CTRL_IP 0x10 /* interrupt flag/pending */
-#define GPTIMER_CTRL_CH 0x20 /* Chain with previous timer */
-
-typedef struct {
- volatile unsigned int scalar;
- volatile unsigned int scalar_reload;
- volatile unsigned int config;
- volatile unsigned int unused;
- volatile ambapp_dev_gptimer_element e[8];
-} ambapp_dev_gptimer;
-
-#endif
+++ /dev/null
-/* Gaisler.com GRETH 10/100/1000 Ethernet MAC definitions
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __GRLIB_GRETH_H__
-#define __GRLIB_GRETH_H__
-
-#define GRETH_FD 0x10
-#define GRETH_RESET 0x40
-#define GRETH_MII_BUSY 0x8
-#define GRETH_MII_NVALID 0x10
-
-/* MII registers */
-#define GRETH_MII_EXTADV_1000FD 0x00000200
-#define GRETH_MII_EXTADV_1000HD 0x00000100
-#define GRETH_MII_EXTPRT_1000FD 0x00000800
-#define GRETH_MII_EXTPRT_1000HD 0x00000400
-
-#define GRETH_MII_100T4 0x00000200
-#define GRETH_MII_100TXFD 0x00000100
-#define GRETH_MII_100TXHD 0x00000080
-#define GRETH_MII_10FD 0x00000040
-#define GRETH_MII_10HD 0x00000020
-
-#define GRETH_BD_EN 0x800
-#define GRETH_BD_WR 0x1000
-#define GRETH_BD_IE 0x2000
-#define GRETH_BD_LEN 0x7FF
-
-#define GRETH_TXEN 0x1
-#define GRETH_INT_TX 0x8
-#define GRETH_TXI 0x4
-#define GRETH_TXBD_STATUS 0x0001C000
-#define GRETH_TXBD_MORE 0x20000
-#define GRETH_TXBD_IPCS 0x40000
-#define GRETH_TXBD_TCPCS 0x80000
-#define GRETH_TXBD_UDPCS 0x100000
-#define GRETH_TXBD_ERR_LC 0x10000
-#define GRETH_TXBD_ERR_UE 0x4000
-#define GRETH_TXBD_ERR_AL 0x8000
-#define GRETH_TXBD_NUM 128
-#define GRETH_TXBD_NUM_MASK (GRETH_TXBD_NUM-1)
-#define GRETH_TX_BUF_SIZE 2048
-
-#define GRETH_INT_RX 0x4
-#define GRETH_RXEN 0x2
-#define GRETH_RXI 0x8
-#define GRETH_RXBD_STATUS 0xFFFFC000
-#define GRETH_RXBD_ERR_AE 0x4000
-#define GRETH_RXBD_ERR_FT 0x8000
-#define GRETH_RXBD_ERR_CRC 0x10000
-#define GRETH_RXBD_ERR_OE 0x20000
-#define GRETH_RXBD_ERR_LE 0x40000
-#define GRETH_RXBD_IP_DEC 0x80000
-#define GRETH_RXBD_IP_CSERR 0x100000
-#define GRETH_RXBD_UDP_DEC 0x200000
-#define GRETH_RXBD_UDP_CSERR 0x400000
-#define GRETH_RXBD_TCP_DEC 0x800000
-#define GRETH_RXBD_TCP_CSERR 0x1000000
-
-#define GRETH_RXBD_NUM 128
-#define GRETH_RXBD_NUM_MASK (GRETH_RXBD_NUM-1)
-#define GRETH_RX_BUF_SIZE 2048
-
-/* Ethernet configuration registers */
-typedef struct _greth_regs {
- volatile unsigned int control;
- volatile unsigned int status;
- volatile unsigned int esa_msb;
- volatile unsigned int esa_lsb;
- volatile unsigned int mdio;
- volatile unsigned int tx_desc_p;
- volatile unsigned int rx_desc_p;
- volatile unsigned int edcl_ip;
-} greth_regs;
-
-/* Ethernet buffer descriptor */
-typedef struct _greth_bd {
- volatile unsigned int stat;
- unsigned int addr; /* Buffer address not changed by HW */
-} greth_bd;
-
-#endif
+++ /dev/null
-/* GRLIB IRQMP (IRQ Multi-processor controller) definitions
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __GRLIB_IRQMP_H__
-#define __GRLIB_IRQMP_H__
-
-typedef struct {
- volatile unsigned int ilevel;
- volatile unsigned int ipend;
- volatile unsigned int iforce;
- volatile unsigned int iclear;
- volatile unsigned int mstatus;
- volatile unsigned int notused[11];
- volatile unsigned int cpu_mask[16];
- volatile unsigned int cpu_force[16];
-} ambapp_dev_irqmp;
-
-#endif
int ftgmac100_initialize(bd_t *bits);
int ftmac100_initialize(bd_t *bits);
int ftmac110_initialize(bd_t *bits);
-int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
int ks8851_mll_initialize(u8 dev_num, int base_addr);
int lan91c96_initialize(u8 dev_num, int base_addr);
projects / uboot.git / commitdiff