net: phy: c45 baset1: do not skip aneg configuration if clock role is not specified

In case master/slave clock role is not specified (which is default), the
aneg registers will not be written.

The visible impact of this is missing pause advertisement.

So, rework genphy_c45_baset1_an_config_aneg() to be able to write
advertisement registers even if clock role is unknown.

Fixes: 101de7da0e4f ("net: phy: Add 10BASE-T1L support in phy-c45")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805073159.908643-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 29b1df03f3e8b2d7b7d8f44dda28bbac9c3e2d66..a87a4b3ffce4e02641c8a5b451762ff86d9b7398 100644 (file)
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -190,44 +190,42 @@ EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
  */
 static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev)
 {
+       u16 adv_l_mask, adv_l = 0;
+       u16 adv_m_mask, adv_m = 0;
        int changed = 0;
-       u16 adv_l = 0;
-       u16 adv_m = 0;
        int ret;
 
+       adv_l_mask = MDIO_AN_T1_ADV_L_FORCE_MS | MDIO_AN_T1_ADV_L_PAUSE_CAP |
+               MDIO_AN_T1_ADV_L_PAUSE_ASYM;
+       adv_m_mask = MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L;
+
        switch (phydev->master_slave_set) {
        case MASTER_SLAVE_CFG_MASTER_FORCE:
+               adv_m |= MDIO_AN_T1_ADV_M_MST;
+               fallthrough;
        case MASTER_SLAVE_CFG_SLAVE_FORCE:
                adv_l |= MDIO_AN_T1_ADV_L_FORCE_MS;
                break;
        case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+               adv_m |= MDIO_AN_T1_ADV_M_MST;
+               fallthrough;
        case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
                break;
        case MASTER_SLAVE_CFG_UNKNOWN:
        case MASTER_SLAVE_CFG_UNSUPPORTED:
-               return 0;
+               /* if master/slave role is not specified, do not overwrite it */
+               adv_l_mask &= ~MDIO_AN_T1_ADV_L_FORCE_MS;
+               adv_m_mask &= ~MDIO_AN_T1_ADV_M_MST;
+               break;
        default:
                phydev_warn(phydev, "Unsupported Master/Slave mode\n");
                return -EOPNOTSUPP;
        }
 
-       switch (phydev->master_slave_set) {
-       case MASTER_SLAVE_CFG_MASTER_FORCE:
-       case MASTER_SLAVE_CFG_MASTER_PREFERRED:
-               adv_m |= MDIO_AN_T1_ADV_M_MST;
-               break;
-       case MASTER_SLAVE_CFG_SLAVE_FORCE:
-       case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
-               break;
-       default:
-               break;
-       }
-
        adv_l |= linkmode_adv_to_mii_t1_adv_l_t(phydev->advertising);
 
        ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_L,
-                                    (MDIO_AN_T1_ADV_L_FORCE_MS | MDIO_AN_T1_ADV_L_PAUSE_CAP
-                                    | MDIO_AN_T1_ADV_L_PAUSE_ASYM), adv_l);
+                                    adv_l_mask, adv_l);
        if (ret < 0)
                return ret;
        if (ret > 0)
@@ -236,7 +234,7 @@ static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev)
        adv_m |= linkmode_adv_to_mii_t1_adv_m_t(phydev->advertising);
 
        ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_M,
-                                    MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L, adv_m);
+                                    adv_m_mask, adv_m);
        if (ret < 0)
                return ret;
        if (ret > 0)