Documentation/devicetree/bindings/net/phy.txt
Optional properties:
-- vsc8531,vddmac : The vddmac in mV.
+- vsc8531,vddmac : The vddmac in mV. Allowed values is listed
+ in the first row of Table 1 (below).
+ This property is only used in combination
+ with the 'edge-slowdown' property.
+ Default value is 3300.
- vsc8531,edge-slowdown : % the edge should be slowed down relative to
- the fastest possible edge time. Native sign
- need not enter.
+ the fastest possible edge time.
Edge rate sets the drive strength of the MAC
- interface output signals. Changing the drive
- strength will affect the edge rate of the output
- signal. The goal of this setting is to help
- reduce electrical emission (EMI) by being able
- to reprogram drive strength and in effect slow
- down the edge rate if desired. Table 1 shows the
- impact to the edge rate per VDDMAC supply for each
- drive strength setting.
- Ref: Table:1 - Edge rate change below.
-
-Note: see dt-bindings/net/mscc-phy-vsc8531.h for applicable values
+ interface output signals. Changing the
+ drive strength will affect the edge rate of
+ the output signal. The goal of this setting
+ is to help reduce electrical emission (EMI)
+ by being able to reprogram drive strength
+ and in effect slow down the edge rate if
+ desired.
+ To adjust the edge-slowdown, the 'vddmac'
+ must be specified. Table 1 lists the
+ supported edge-slowdown values for a given
+ 'vddmac'.
+ Default value is 0%.
+ Ref: Table:1 - Edge rate change (below).
Table: 1 - Edge rate change
----------------------------------------------------------------|
| |
| 3300 mV 2500 mV 1800 mV 1500 mV |
|---------------------------------------------------------------|
-| Default Deafult Default Default |
+| 0% 0% 0% 0% |
| (Fastest) (recommended) (recommended) |
|---------------------------------------------------------------|
-| -2% -3% -5% -6% |
+| 2% 3% 5% 6% |
|---------------------------------------------------------------|
-| -4% -6% -9% -14% |
+| 4% 6% 9% 14% |
|---------------------------------------------------------------|
-| -7% -10% -16% -21% |
+| 7% 10% 16% 21% |
|(recommended) (recommended) |
|---------------------------------------------------------------|
-| -10% -14% -23% -29% |
+| 10% 14% 23% 29% |
|---------------------------------------------------------------|
-| -17% -23% -35% -42% |
+| 17% 23% 35% 42% |
|---------------------------------------------------------------|
-| -29% -37% -52% -58% |
+| 29% 37% 52% 58% |
|---------------------------------------------------------------|
-| -53% -63% -76% -77% |
+| 53% 63% 76% 77% |
| (slowest) |
|---------------------------------------------------------------|
vsc8531_0: ethernet-phy@0 {
compatible = "ethernet-phy-id0007.0570";
vsc8531,vddmac = <3300>;
- vsc8531,edge-slowdown = <21>;
+ vsc8531,edge-slowdown = <7>;
};
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/of.h>
-#include <dt-bindings/net/mscc-phy-vsc8531.h>
#include <linux/netdevice.h>
enum rgmii_rx_clock_delay {
#define PHY_ID_VSC8531 0x00070570
#define PHY_ID_VSC8541 0x00070770
-struct edge_rate_table {
- u16 vddmac;
- int slowdown[MSCC_SLOWDOWN_MAX];
-};
+#define MSCC_VDDMAC_1500 1500
+#define MSCC_VDDMAC_1800 1800
+#define MSCC_VDDMAC_2500 2500
+#define MSCC_VDDMAC_3300 3300
-struct edge_rate_table edge_table[MSCC_VDDMAC_MAX] = {
- {3300, { 0, -2, -4, -7, -10, -17, -29, -53} },
- {2500, { 0, -3, -6, -10, -14, -23, -37, -63} },
- {1800, { 0, -5, -9, -16, -23, -35, -52, -76} },
- {1500, { 0, -6, -14, -21, -29, -42, -58, -77} },
+struct vsc8531_private {
+ int rate_magic;
};
-struct vsc8531_private {
- u8 edge_slowdown;
+#ifdef CONFIG_OF_MDIO
+struct vsc8531_edge_rate_table {
u16 vddmac;
+ u8 slowdown[8];
};
+static const struct vsc8531_edge_rate_table edge_table[] = {
+ {MSCC_VDDMAC_3300, { 0, 2, 4, 7, 10, 17, 29, 53} },
+ {MSCC_VDDMAC_2500, { 0, 3, 6, 10, 14, 23, 37, 63} },
+ {MSCC_VDDMAC_1800, { 0, 5, 9, 16, 23, 35, 52, 76} },
+ {MSCC_VDDMAC_1500, { 0, 6, 14, 21, 29, 42, 58, 77} },
+};
+#endif /* CONFIG_OF_MDIO */
+
static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page)
{
int rc;
mutex_unlock(&phydev->lock);
}
-static u8 edge_rate_magic_get(u16 vddmac,
- int slowdown)
+#ifdef CONFIG_OF_MDIO
+static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
{
- int rc = (MSCC_SLOWDOWN_MAX - 1);
- u8 vdd;
u8 sd;
+ u16 vdd;
+ int rc, i, j;
+ struct device *dev = &phydev->mdio.dev;
+ struct device_node *of_node = dev->of_node;
+ u8 sd_array_size = ARRAY_SIZE(edge_table[0].slowdown);
- for (vdd = 0; vdd < MSCC_VDDMAC_MAX; vdd++) {
- if (edge_table[vdd].vddmac == vddmac) {
- for (sd = 0; sd < MSCC_SLOWDOWN_MAX; sd++) {
- if (edge_table[vdd].slowdown[sd] <= slowdown) {
- rc = (MSCC_SLOWDOWN_MAX - sd - 1);
- break;
- }
- }
- }
- }
+ if (!of_node)
+ return -ENODEV;
- return rc;
+ rc = of_property_read_u16(of_node, "vsc8531,vddmac", &vdd);
+ if (rc != 0)
+ vdd = MSCC_VDDMAC_3300;
+
+ rc = of_property_read_u8(of_node, "vsc8531,edge-slowdown", &sd);
+ if (rc != 0)
+ sd = 0;
+
+ for (i = 0; i < ARRAY_SIZE(edge_table); i++)
+ if (edge_table[i].vddmac == vdd)
+ for (j = 0; j < sd_array_size; j++)
+ if (edge_table[i].slowdown[j] == sd)
+ return (sd_array_size - j - 1);
+
+ return -EINVAL;
+}
+#else
+static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
+{
+ return 0;
}
+#endif /* CONFIG_OF_MDIO */
-static int vsc85xx_edge_rate_cntl_set(struct phy_device *phydev,
- u8 edge_rate)
+static int vsc85xx_edge_rate_cntl_set(struct phy_device *phydev, u8 edge_rate)
{
int rc;
u16 reg_val;
return rc;
}
-#ifdef CONFIG_OF_MDIO
-static int vsc8531_of_init(struct phy_device *phydev)
-{
- int rc;
- struct vsc8531_private *vsc8531 = phydev->priv;
- struct device *dev = &phydev->mdio.dev;
- struct device_node *of_node = dev->of_node;
-
- if (!of_node)
- return -ENODEV;
-
- rc = of_property_read_u16(of_node, "vsc8531,vddmac",
- &vsc8531->vddmac);
- if (rc == -EINVAL)
- vsc8531->vddmac = MSCC_VDDMAC_3300;
- rc = of_property_read_u8(of_node, "vsc8531,edge-slowdown",
- &vsc8531->edge_slowdown);
- if (rc == -EINVAL)
- vsc8531->edge_slowdown = 0;
-
- rc = 0;
- return rc;
-}
-#else
-static int vsc8531_of_init(struct phy_device *phydev)
-{
- return 0;
-}
-#endif /* CONFIG_OF_MDIO */
-
static int vsc85xx_config_init(struct phy_device *phydev)
{
int rc;
struct vsc8531_private *vsc8531 = phydev->priv;
- u8 edge_rate;
-
- rc = vsc8531_of_init(phydev);
- if (rc)
- return rc;
rc = vsc85xx_default_config(phydev);
if (rc)
if (rc)
return rc;
- edge_rate = edge_rate_magic_get(vsc8531->vddmac,
- -(int)vsc8531->edge_slowdown);
- rc = vsc85xx_edge_rate_cntl_set(phydev, edge_rate);
+ rc = vsc85xx_edge_rate_cntl_set(phydev, vsc8531->rate_magic);
if (rc)
return rc;
static int vsc85xx_probe(struct phy_device *phydev)
{
+ int rate_magic;
struct vsc8531_private *vsc8531;
+ rate_magic = vsc85xx_edge_rate_magic_get(phydev);
+ if (rate_magic < 0)
+ return rate_magic;
+
vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL);
if (!vsc8531)
return -ENOMEM;
phydev->priv = vsc8531;
+ vsc8531->rate_magic = rate_magic;
+
return 0;
}
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
- .probe = &vsc85xx_probe,
- .set_wol = &vsc85xx_wol_set,
- .get_wol = &vsc85xx_wol_get,
+ .probe = &vsc85xx_probe,
+ .set_wol = &vsc85xx_wol_set,
+ .get_wol = &vsc85xx_wol_get,
},
{
.phy_id = PHY_ID_VSC8541,
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
- .probe = &vsc85xx_probe,
- .set_wol = &vsc85xx_wol_set,
- .get_wol = &vsc85xx_wol_get,
+ .probe = &vsc85xx_probe,
+ .set_wol = &vsc85xx_wol_set,
+ .get_wol = &vsc85xx_wol_get,
}
};
projects / kernel.git / commitdiff