]> git.baikalelectronics.ru Git - kernel.git/commitdiff
drm/panel: introduce ebbg,ft8719 panel
authorJoel Selvaraj <jo@jsfamily.in>
Wed, 1 Jun 2022 08:24:10 +0000 (13:54 +0530)
committerSam Ravnborg <sam@ravnborg.org>
Fri, 24 Jun 2022 20:35:38 +0000 (22:35 +0200)
Add DRM panel driver for EBBG FT8719 6.18" 2246x1080 DSI video mode
panel, which can be found on some Xiaomi Poco F1 phones. The panel's
backlight is managed through QCOM WLED driver.

Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/BY5PR02MB7009B6FA7F17A3DA36DDA44CD9DF9@BY5PR02MB7009.namprd02.prod.outlook.com
MAINTAINERS
drivers/gpu/drm/panel/Kconfig
drivers/gpu/drm/panel/Makefile
drivers/gpu/drm/panel/panel-ebbg-ft8719.c [new file with mode: 0644]

index 4036b64ed7b0025a78e67e00b03fe70e508c0100..7d767c1c9e4a056412c5097c95d80d2701e0851f 100644 (file)
@@ -6226,6 +6226,13 @@ S:       Maintained
 F:     Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
 F:     drivers/gpu/drm/bridge/chipone-icn6211.c
 
+DRM DRIVER FOR EBBG FT8719 PANEL
+M:     Joel Selvaraj <jo@jsfamily.in>
+S:     Maintained
+T:     git git://anongit.freedesktop.org/drm/drm-misc
+F:     Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
+F:     drivers/gpu/drm/panel/panel-ebbg-ft8719.c
+
 DRM DRIVER FOR FARADAY TVE200 TV ENCODER
 M:     Linus Walleij <linus.walleij@linaro.org>
 S:     Maintained
index 4f1f004b3c54351a24b1b8364242f8fa08020473..a9043eacce97c6c06234a15bc9fac306a5c3ed3c 100644 (file)
@@ -115,6 +115,17 @@ config DRM_PANEL_EDP
          that it can be automatically turned off when the panel goes into a
          low power state.
 
+config DRM_PANEL_EBBG_FT8719
+       tristate "EBBG FT8719 panel driver"
+       depends on OF
+       depends on DRM_MIPI_DSI
+       depends on BACKLIGHT_CLASS_DEVICE
+       help
+         Say Y here if you want to enable support for the EBBG FT8719
+         video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
+         The panel has a resolution of 1080x2246. It provides a MIPI DSI
+         interface to the host.
+
 config DRM_PANEL_ELIDA_KD35T133
        tristate "Elida KD35T133 panel driver"
        depends on OF
index 42a7ab54234b0b7e30732803e4138e3385e5477f..34e717382dbb65145deaedeff8b5491a629e4b46 100644 (file)
@@ -9,6 +9,7 @@ obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_EDP) += panel-edp.o
+obj-$(CONFIG_DRM_PANEL_EBBG_FT8719) += panel-ebbg-ft8719.o
 obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o
 obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
 obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
new file mode 100644 (file)
index 0000000..386f832
--- /dev/null
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Joel Selvaraj <jo@jsfamily.in>
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+static const char * const regulator_names[] = {
+       "vddio",
+       "vddpos",
+       "vddneg",
+};
+
+static const unsigned long regulator_enable_loads[] = {
+       62000,
+       100000,
+       100000
+};
+
+struct ebbg_ft8719 {
+       struct drm_panel panel;
+       struct mipi_dsi_device *dsi;
+
+       struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
+
+       struct gpio_desc *reset_gpio;
+};
+
+static inline
+struct ebbg_ft8719 *to_ebbg_ft8719(struct drm_panel *panel)
+{
+       return container_of(panel, struct ebbg_ft8719, panel);
+}
+
+static void ebbg_ft8719_reset(struct ebbg_ft8719 *ctx)
+{
+       gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+       usleep_range(4000, 5000);
+       gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+       usleep_range(1000, 2000);
+       gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+       usleep_range(15000, 16000);
+}
+
+static int ebbg_ft8719_on(struct ebbg_ft8719 *ctx)
+{
+       struct mipi_dsi_device *dsi = ctx->dsi;
+       struct device *dev = &dsi->dev;
+       int ret;
+
+       dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+       ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff);
+       if (ret < 0) {
+               dev_err(dev, "Failed to set display brightness: %d\n", ret);
+               return ret;
+       }
+
+       mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
+       mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+
+       ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+       if (ret < 0) {
+               dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+               return ret;
+       }
+       msleep(90);
+
+       ret = mipi_dsi_dcs_set_display_on(dsi);
+       if (ret < 0) {
+               dev_err(dev, "Failed to set display on: %d\n", ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int ebbg_ft8719_off(struct ebbg_ft8719 *ctx)
+{
+       struct mipi_dsi_device *dsi = ctx->dsi;
+       struct device *dev = &dsi->dev;
+       int ret;
+
+       dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+       ret = mipi_dsi_dcs_set_display_off(dsi);
+       if (ret < 0) {
+               dev_err(dev, "Failed to set display off: %d\n", ret);
+               return ret;
+       }
+       usleep_range(10000, 11000);
+
+       ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+       if (ret < 0) {
+               dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+               return ret;
+       }
+       msleep(90);
+
+       return 0;
+}
+
+static int ebbg_ft8719_prepare(struct drm_panel *panel)
+{
+       struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
+       struct device *dev = &ctx->dsi->dev;
+       int ret;
+
+       ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+       if (ret < 0)
+               return ret;
+
+       ebbg_ft8719_reset(ctx);
+
+       ret = ebbg_ft8719_on(ctx);
+       if (ret < 0) {
+               dev_err(dev, "Failed to initialize panel: %d\n", ret);
+               gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int ebbg_ft8719_unprepare(struct drm_panel *panel)
+{
+       struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
+       struct device *dev = &ctx->dsi->dev;
+       int ret;
+
+       ret = ebbg_ft8719_off(ctx);
+       if (ret < 0)
+               dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+       gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+       ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+       if (ret)
+               dev_err(panel->dev, "Failed to disable regulators: %d\n", ret);
+
+       return 0;
+}
+
+static const struct drm_display_mode ebbg_ft8719_mode = {
+       .clock = (1080 + 28 + 4 + 16) * (2246 + 120 + 4 + 12) * 60 / 1000,
+       .hdisplay = 1080,
+       .hsync_start = 1080 + 28,
+       .hsync_end = 1080 + 28 + 4,
+       .htotal = 1080 + 28 + 4 + 16,
+       .vdisplay = 2246,
+       .vsync_start = 2246 + 120,
+       .vsync_end = 2246 + 120 + 4,
+       .vtotal = 2246 + 120 + 4 + 12,
+       .width_mm = 68,
+       .height_mm = 141,
+};
+
+static int ebbg_ft8719_get_modes(struct drm_panel *panel,
+                                    struct drm_connector *connector)
+{
+       struct drm_display_mode *mode;
+
+       mode = drm_mode_duplicate(connector->dev, &ebbg_ft8719_mode);
+       if (!mode)
+               return -ENOMEM;
+
+       drm_mode_set_name(mode);
+
+       mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+       connector->display_info.width_mm = mode->width_mm;
+       connector->display_info.height_mm = mode->height_mm;
+       drm_mode_probed_add(connector, mode);
+
+       return 1;
+}
+
+static const struct drm_panel_funcs ebbg_ft8719_panel_funcs = {
+       .prepare = ebbg_ft8719_prepare,
+       .unprepare = ebbg_ft8719_unprepare,
+       .get_modes = ebbg_ft8719_get_modes,
+};
+
+static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
+{
+       struct device *dev = &dsi->dev;
+       struct ebbg_ft8719 *ctx;
+       int i, ret;
+
+       ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+       if (!ctx)
+               return -ENOMEM;
+
+       for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
+               ctx->supplies[i].supply = regulator_names[i];
+
+       ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+                                     ctx->supplies);
+       if (ret < 0)
+               return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+       for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+               ret = regulator_set_load(ctx->supplies[i].consumer,
+                                               regulator_enable_loads[i]);
+               if (ret)
+                       return dev_err_probe(dev, ret,
+                                                "Failed to set regulator load\n");
+       }
+
+       ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+       if (IS_ERR(ctx->reset_gpio))
+               return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+                                    "Failed to get reset-gpios\n");
+
+       ctx->dsi = dsi;
+       mipi_dsi_set_drvdata(dsi, ctx);
+
+       dsi->lanes = 4;
+       dsi->format = MIPI_DSI_FMT_RGB888;
+       dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+                         MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+       drm_panel_init(&ctx->panel, dev, &ebbg_ft8719_panel_funcs,
+                      DRM_MODE_CONNECTOR_DSI);
+
+       ret = drm_panel_of_backlight(&ctx->panel);
+       if (ret)
+               return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+       drm_panel_add(&ctx->panel);
+
+       ret = mipi_dsi_attach(dsi);
+       if (ret < 0) {
+               dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+               drm_panel_remove(&ctx->panel);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int ebbg_ft8719_remove(struct mipi_dsi_device *dsi)
+{
+       struct ebbg_ft8719 *ctx = mipi_dsi_get_drvdata(dsi);
+       int ret;
+
+       ret = mipi_dsi_detach(dsi);
+       if (ret < 0)
+               dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+       drm_panel_remove(&ctx->panel);
+
+       return 0;
+}
+
+static const struct of_device_id ebbg_ft8719_of_match[] = {
+       { .compatible = "ebbg,ft8719" },
+       { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ebbg_ft8719_of_match);
+
+static struct mipi_dsi_driver ebbg_ft8719_driver = {
+       .probe = ebbg_ft8719_probe,
+       .remove = ebbg_ft8719_remove,
+       .driver = {
+               .name = "panel-ebbg-ft8719",
+               .of_match_table = ebbg_ft8719_of_match,
+       },
+};
+module_mipi_dsi_driver(ebbg_ft8719_driver);
+
+MODULE_AUTHOR("Joel Selvaraj <jo@jsfamily.in>");
+MODULE_DESCRIPTION("DRM driver for EBBG FT8719 video dsi panel");
+MODULE_LICENSE("GPL v2");